brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 49 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0066-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch b/target/linux/brcm2708/patches-4.14/950-0066-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch
new file mode 100644
index 0000000000..db88e01189
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0066-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch
@@ -0,0 +1,49 @@
+From eeb120030591b06ea9f9a09383180f8f24f2baba Mon Sep 17 00:00:00 2001
+From: Daniel Matuschek <info@crazy-audio.com>
+Date: Wed, 15 Jan 2014 21:41:23 +0100
+Subject: [PATCH 066/454] ASoC: wm8804: Implement MCLK configuration options,
+ add 32bit support WM8804 can run with PLL frequencies of 256xfs and 128xfs
+ for most sample rates. At 192kHz only 128xfs is supported. The existing
+ driver selects 128xfs automatically for some lower samples rates. By using an
+ additional mclk_div divider, it is now possible to control the behaviour.
+ This allows using 256xfs PLL frequency on all sample rates up to 96kHz. It
+ should allow lower jitter and better signal quality. The behavior has to be
+ controlled by the sound card driver, because some sample frequency share the
+ same setting. e.g. 192kHz and 96kHz use 24.576MHz master clock. The only
+ difference is the MCLK divider.
+
+This also added support for 32bit data.
+
+Signed-off-by: Daniel Matuschek <daniel@matuschek.net>
+---
+ sound/soc/codecs/wm8804.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+--- a/sound/soc/codecs/wm8804.c
++++ b/sound/soc/codecs/wm8804.c
+@@ -304,6 +304,7 @@ static int wm8804_hw_params(struct snd_p
+ 		blen = 0x1;
+ 		break;
+ 	case 24:
++	case 32:
+ 		blen = 0x2;
+ 		break;
+ 	default:
+@@ -515,7 +516,7 @@ static const struct snd_soc_dai_ops wm88
+ };
+ 
+ #define WM8804_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+-			SNDRV_PCM_FMTBIT_S24_LE)
++			SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
+ 
+ #define WM8804_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ 		      SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
+@@ -543,7 +544,7 @@ static struct snd_soc_dai_driver wm8804_
+ };
+ 
+ static const struct snd_soc_codec_driver soc_codec_dev_wm8804 = {
+-	.idle_bias_off = true,
++	.idle_bias_off = false,
+ 
+ 	.component_driver = {
+ 		.dapm_widgets		= wm8804_dapm_widgets,