diff options
author | Stijn Tintel <stijn@linux-ipv6.be> | 2018-11-10 13:03:18 +0200 |
---|---|---|
committer | Stijn Tintel <stijn@linux-ipv6.be> | 2018-12-18 23:19:21 +0200 |
commit | f5919b65d4c671fd5083838c7a445f319f9a13c8 (patch) | |
tree | 2c791d2a5dea5bbbb0b85f86f74afce2647c0726 /target/linux/brcm2708/patches-4.14/950-0055-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch | |
parent | 822b4c3b250a254e74407056ccfd5c6aa38da162 (diff) | |
download | upstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.tar.gz upstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.tar.bz2 upstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.zip |
brcm2708: add kernel 4.14 support
Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89
Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""
Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch
Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.
Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0055-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch')
-rw-r--r-- | target/linux/brcm2708/patches-4.14/950-0055-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0055-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch b/target/linux/brcm2708/patches-4.14/950-0055-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch new file mode 100644 index 0000000000..12f17397d0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.14/950-0055-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch @@ -0,0 +1,167 @@ +From 55006c315659a66183d5513c1b441651a3c9a5fd Mon Sep 17 00:00:00 2001 +From: Phil Elwell <phil@raspberrypi.org> +Date: Fri, 6 Feb 2015 13:50:57 +0000 +Subject: [PATCH 055/454] BCM270x_DT: Add pwr_led, and the required "input" + trigger + +The "input" trigger makes the associated GPIO an input. This is to support +the Raspberry Pi PWR LED, which is driven by external hardware in normal use. + +N.B. pwr_led is not available on Model A or B boards. + +leds-gpio: Implement the brightness_get method + +The power LED uses some clever logic that means it is driven +by a voltage measuring circuit when configured as input, otherwise +it is driven by the GPIO output value. This patch wires up the +brightness_get method for leds-gpio so that user-space can monitor +the LED value via /sys/class/gpio/led1/brightness. Using the input +trigger this returns an indication of the system power health, +otherwise it is just whatever value the trigger has written most +recently. + +See: https://github.com/raspberrypi/linux/issues/1064 +--- + drivers/leds/leds-gpio.c | 17 ++++++++- + drivers/leds/trigger/Kconfig | 7 ++++ + drivers/leds/trigger/Makefile | 1 + + drivers/leds/trigger/ledtrig-input.c | 54 ++++++++++++++++++++++++++++ + include/linux/leds.h | 3 ++ + 5 files changed, 81 insertions(+), 1 deletion(-) + create mode 100644 drivers/leds/trigger/ledtrig-input.c + +--- a/drivers/leds/leds-gpio.c ++++ b/drivers/leds/leds-gpio.c +@@ -50,8 +50,15 @@ static void gpio_led_set(struct led_clas + led_dat->platform_gpio_blink_set(led_dat->gpiod, level, + NULL, NULL); + led_dat->blinking = 0; ++ } else if (led_dat->cdev.flags & SET_GPIO_INPUT) { ++ gpiod_direction_input(led_dat->gpiod); ++ led_dat->cdev.flags &= ~SET_GPIO_INPUT; ++ } else if (led_dat->cdev.flags & SET_GPIO_OUTPUT) { ++ gpiod_direction_output(led_dat->gpiod, level); ++ led_dat->cdev.flags &= ~SET_GPIO_OUTPUT; + } else { +- if (led_dat->can_sleep) ++ if (led_dat->can_sleep || ++ (led_dat->cdev.flags & (SET_GPIO_INPUT | SET_GPIO_OUTPUT) )) + gpiod_set_value_cansleep(led_dat->gpiod, level); + else + gpiod_set_value(led_dat->gpiod, level); +@@ -65,6 +72,13 @@ static int gpio_led_set_blocking(struct + return 0; + } + ++static enum led_brightness gpio_led_get(struct led_classdev *led_cdev) ++{ ++ struct gpio_led_data *led_dat = ++ container_of(led_cdev, struct gpio_led_data, cdev); ++ return gpiod_get_value_cansleep(led_dat->gpiod) ? LED_FULL : LED_OFF; ++} ++ + static int gpio_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) + { +@@ -122,6 +136,7 @@ static int create_gpio_led(const struct + led_dat->platform_gpio_blink_set = blink_set; + led_dat->cdev.blink_set = gpio_blink_set; + } ++ led_dat->cdev.brightness_get = gpio_led_get; + if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) { + state = gpiod_get_value_cansleep(led_dat->gpiod); + if (state < 0) +--- a/drivers/leds/trigger/Kconfig ++++ b/drivers/leds/trigger/Kconfig +@@ -116,6 +116,13 @@ config LEDS_TRIGGER_CAMERA + This enables direct flash/torch on/off by the driver, kernel space. + If unsure, say Y. + ++config LEDS_TRIGGER_INPUT ++ tristate "LED Input Trigger" ++ depends on LEDS_TRIGGERS ++ help ++ This allows the GPIOs assigned to be LEDs to be initialised to inputs. ++ If unsure, say Y. ++ + config LEDS_TRIGGER_PANIC + bool "LED Panic Trigger" + depends on LEDS_TRIGGERS +--- a/drivers/leds/trigger/Makefile ++++ b/drivers/leds/trigger/Makefile +@@ -10,5 +10,6 @@ obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtr + obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o + obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o + obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o ++obj-$(CONFIG_LEDS_TRIGGER_INPUT) += ledtrig-input.o + obj-$(CONFIG_LEDS_TRIGGER_PANIC) += ledtrig-panic.o + obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o +--- /dev/null ++++ b/drivers/leds/trigger/ledtrig-input.c +@@ -0,0 +1,54 @@ ++/* ++ * Set LED GPIO to Input "Trigger" ++ * ++ * Copyright 2015 Phil Elwell <phil@raspberrypi.org> ++ * ++ * Based on Nick Forbes's ledtrig-default-on.c. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/leds.h> ++#include <linux/gpio.h> ++#include "../leds.h" ++ ++static void input_trig_activate(struct led_classdev *led_cdev) ++{ ++ led_cdev->flags |= SET_GPIO_INPUT; ++ led_set_brightness(led_cdev, 0); ++} ++ ++static void input_trig_deactivate(struct led_classdev *led_cdev) ++{ ++ led_cdev->flags |= SET_GPIO_OUTPUT; ++ led_set_brightness(led_cdev, 0); ++} ++ ++static struct led_trigger input_led_trigger = { ++ .name = "input", ++ .activate = input_trig_activate, ++ .deactivate = input_trig_deactivate, ++}; ++ ++static int __init input_trig_init(void) ++{ ++ return led_trigger_register(&input_led_trigger); ++} ++ ++static void __exit input_trig_exit(void) ++{ ++ led_trigger_unregister(&input_led_trigger); ++} ++ ++module_init(input_trig_init); ++module_exit(input_trig_exit); ++ ++MODULE_AUTHOR("Phil Elwell <phil@raspberrypi.org>"); ++MODULE_DESCRIPTION("Set LED GPIO to Input \"trigger\""); ++MODULE_LICENSE("GPL"); +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -50,6 +50,9 @@ struct led_classdev { + #define LED_PANIC_INDICATOR (1 << 20) + #define LED_BRIGHT_HW_CHANGED (1 << 21) + #define LED_RETAIN_AT_SHUTDOWN (1 << 22) ++ /* Additions for Raspberry Pi PWR LED */ ++#define SET_GPIO_INPUT (1 << 30) ++#define SET_GPIO_OUTPUT (1 << 31) + + /* set_brightness_work / blink_timer flags, atomic, private. */ + unsigned long work_flags; |