diff options
author | Roger Pueyo Centelles <roger.pueyo@guifi.net> | 2019-10-24 15:29:14 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-11-12 18:04:50 +0100 |
commit | 589c3cf4e08731e4971d2db6c83e16b5ab959878 (patch) | |
tree | cad1c2d6a8fefe500bbd9dd2110a7a7a4b556f67 /target/linux/brcm2708/patches-4.14/950-0029-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch | |
parent | 2a3dbded93775aeaf28fbebbd6aada07c9f588c1 (diff) | |
download | upstream-589c3cf4e08731e4971d2db6c83e16b5ab959878.tar.gz upstream-589c3cf4e08731e4971d2db6c83e16b5ab959878.tar.bz2 upstream-589c3cf4e08731e4971d2db6c83e16b5ab959878.zip |
ath79: remove wmac mtd-mac-address for UniFi AC family
The MAC address for the wmac 2.4 GHz radio of the Ubiquiti UniFi AC
family of devices is actually embedded in the mtd-cal-data, so there
is no need for mtd-mac-address (which was incorrectly forcing wmac
to have the same MAC as eth0). This makes it coherent with the stock
firmware and the ar71xx target:
· XX:XX:XX:X0:XX:XX eth0
· XX:XX:XX:X1:XX:XX ath0/wlan1 (2.4 GHz)
· XX:XX:XX:X2:XX:XX ath1/wlan0 (5 GHz)
Checked on a UniFi AC Mesh, a UniFi AC LR and a UniFi Lite.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
(cherry picked from commit 20ace70db65c3f1cb6a842d3092ac2eb7be81b5a)
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0029-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch')
0 files changed, 0 insertions, 0 deletions