brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 101 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0016-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch b/target/linux/brcm2708/patches-4.14/950-0016-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch
new file mode 100644
index 0000000000..bb14791bad
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0016-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch
@@ -0,0 +1,101 @@
+From 8a9eb6f0ef9e548aaa5ac60e95e4c0c9c99adcab Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
+Date: Sat, 3 Oct 2015 22:22:55 +0200
+Subject: [PATCH 016/454] dmaengine: bcm2835: Load driver early and support
+ legacy API
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Load driver early since at least bcm2708_fb doesn't support deferred
+probing and even if it did, we don't want the video driver deferred.
+Support the legacy DMA API which is needed by bcm2708_fb.
+Don't mask out channel 2.
+
+Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
+---
+ drivers/dma/Kconfig       |  2 +-
+ drivers/dma/bcm2835-dma.c | 26 +++++++++++++++++++++++++-
+ 2 files changed, 26 insertions(+), 2 deletions(-)
+
+--- a/drivers/dma/Kconfig
++++ b/drivers/dma/Kconfig
+@@ -131,7 +131,7 @@ config COH901318
+ 
+ config DMA_BCM2835
+ 	tristate "BCM2835 DMA engine support"
+-	depends on ARCH_BCM2835
++	depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709
+ 	select DMA_ENGINE
+ 	select DMA_VIRTUAL_CHANNELS
+ 
+--- a/drivers/dma/bcm2835-dma.c
++++ b/drivers/dma/bcm2835-dma.c
+@@ -37,6 +37,7 @@
+ #include <linux/interrupt.h>
+ #include <linux/list.h>
+ #include <linux/module.h>
++#include <linux/platform_data/dma-bcm2708.h>
+ #include <linux/platform_device.h>
+ #include <linux/slab.h>
+ #include <linux/io.h>
+@@ -48,6 +49,7 @@
+ 
+ #define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14
+ #define BCM2835_DMA_CHAN_NAME_SIZE 8
++#define BCM2835_DMA_BULK_MASK  BIT(0)
+ 
+ struct bcm2835_dmadev {
+ 	struct dma_device ddev;
+@@ -925,6 +927,9 @@ static int bcm2835_dma_probe(struct plat
+ 	base = devm_ioremap_resource(&pdev->dev, res);
+ 	if (IS_ERR(base))
+ 		return PTR_ERR(base);
++	rc = bcm_dmaman_probe(pdev, base, BCM2835_DMA_BULK_MASK);
++	if (rc)
++		dev_err(&pdev->dev, "Failed to initialize the legacy API\n");
+ 
+ 	od->base = base;
+ 
+@@ -962,6 +967,9 @@ static int bcm2835_dma_probe(struct plat
+ 		goto err_no_dma;
+ 	}
+ 
++	/* Channel 0 is used by the legacy API */
++	chans_available &= ~BCM2835_DMA_BULK_MASK;
++
+ 	/* get irqs for each channel that we support */
+ 	for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
+ 		/* skip masked out channels */
+@@ -1036,6 +1044,7 @@ static int bcm2835_dma_remove(struct pla
+ {
+ 	struct bcm2835_dmadev *od = platform_get_drvdata(pdev);
+ 
++	bcm_dmaman_remove(pdev);
+ 	dma_async_device_unregister(&od->ddev);
+ 	bcm2835_dma_free(od);
+ 
+@@ -1051,7 +1060,22 @@ static struct platform_driver bcm2835_dm
+ 	},
+ };
+ 
+-module_platform_driver(bcm2835_dma_driver);
++static int bcm2835_dma_init(void)
++{
++	return platform_driver_register(&bcm2835_dma_driver);
++}
++
++static void bcm2835_dma_exit(void)
++{
++	platform_driver_unregister(&bcm2835_dma_driver);
++}
++
++/*
++ * Load after serial driver (arch_initcall) so we see the messages if it fails,
++ * but before drivers (module_init) that need a DMA channel.
++ */
++subsys_initcall(bcm2835_dma_init);
++module_exit(bcm2835_dma_exit);
+ 
+ MODULE_ALIAS("platform:bcm2835-dma");
+ MODULE_DESCRIPTION("BCM2835 DMA engine driver");