brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 127 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0008-irqchip-bcm2835-Add-FIQ-support.patch b/target/linux/brcm2708/patches-4.14/950-0008-irqchip-bcm2835-Add-FIQ-support.patch
new file mode 100644
index 0000000000..dee8c54973
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0008-irqchip-bcm2835-Add-FIQ-support.patch
@@ -0,0 +1,127 @@
+From 3bf3bf7064d688dae7fdf7b49b28073eccd9dd99 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
+Date: Fri, 12 Jun 2015 19:01:05 +0200
+Subject: [PATCH 008/454] irqchip: bcm2835: Add FIQ support
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add a duplicate irq range with an offset on the hwirq's so the
+driver can detect that enable_fiq() is used.
+Tested with downstream dwc_otg USB controller driver.
+
+Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
+Reviewed-by: Eric Anholt <eric@anholt.net>
+Acked-by: Stephen Warren <swarren@wwwdotorg.org>
+---
+ arch/arm/mach-bcm/Kconfig     |  1 +
+ drivers/irqchip/irq-bcm2835.c | 51 +++++++++++++++++++++++++++++++----
+ 2 files changed, 47 insertions(+), 5 deletions(-)
+
+--- a/arch/arm/mach-bcm/Kconfig
++++ b/arch/arm/mach-bcm/Kconfig
+@@ -155,6 +155,7 @@ config ARCH_BCM2835
+ 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
+ 	select TIMER_OF
+ 	select BCM2835_TIMER
++	select FIQ
+ 	select PINCTRL
+ 	select PINCTRL_BCM2835
+ 	help
+--- a/drivers/irqchip/irq-bcm2835.c
++++ b/drivers/irqchip/irq-bcm2835.c
+@@ -54,7 +54,7 @@
+ #include <asm/exception.h>
+ 
+ /* Put the bank and irq (32 bits) into the hwirq */
+-#define MAKE_HWIRQ(b, n)	((b << 5) | (n))
++#define MAKE_HWIRQ(b, n)	(((b) << 5) | (n))
+ #define HWIRQ_BANK(i)		(i >> 5)
+ #define HWIRQ_BIT(i)		BIT(i & 0x1f)
+ 
+@@ -70,9 +70,13 @@
+ 					| SHORTCUT1_MASK | SHORTCUT2_MASK)
+ 
+ #define REG_FIQ_CONTROL		0x0c
++#define REG_FIQ_ENABLE		0x80
++#define REG_FIQ_DISABLE		0
+ 
+ #define NR_BANKS		3
+ #define IRQS_PER_BANK		32
++#define NUMBER_IRQS		MAKE_HWIRQ(NR_BANKS, 0)
++#define FIQ_START		(NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0))
+ 
+ static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
+ static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
+@@ -97,14 +101,38 @@ static void __exception_irq_entry bcm283
+ 	struct pt_regs *regs);
+ static void bcm2836_chained_handle_irq(struct irq_desc *desc);
+ 
++static inline unsigned int hwirq_to_fiq(unsigned long hwirq)
++{
++	hwirq -= NUMBER_IRQS;
++	/*
++	 * The hwirq numbering used in this driver is:
++	 *   BASE (0-7) GPU1 (32-63) GPU2 (64-95).
++	 * This differ from the one used in the FIQ register:
++	 *   GPU1 (0-31) GPU2 (32-63) BASE (64-71)
++	 */
++	if (hwirq >= 32)
++		return hwirq - 32;
++
++	return hwirq + 64;
++}
++
+ static void armctrl_mask_irq(struct irq_data *d)
+ {
+-	writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]);
++	if (d->hwirq >= NUMBER_IRQS)
++		writel_relaxed(REG_FIQ_DISABLE, intc.base + REG_FIQ_CONTROL);
++	else
++		writel_relaxed(HWIRQ_BIT(d->hwirq),
++			       intc.disable[HWIRQ_BANK(d->hwirq)]);
+ }
+ 
+ static void armctrl_unmask_irq(struct irq_data *d)
+ {
+-	writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]);
++	if (d->hwirq >= NUMBER_IRQS)
++		writel_relaxed(REG_FIQ_ENABLE | hwirq_to_fiq(d->hwirq),
++			       intc.base + REG_FIQ_CONTROL);
++	else
++		writel_relaxed(HWIRQ_BIT(d->hwirq),
++			       intc.enable[HWIRQ_BANK(d->hwirq)]);
+ }
+ 
+ static struct irq_chip armctrl_chip = {
+@@ -149,8 +177,9 @@ static int __init armctrl_of_init(struct
+ 	if (!base)
+ 		panic("%pOF: unable to map IC registers\n", node);
+ 
+-	intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0),
+-			&armctrl_ops, NULL);
++	intc.base = base;
++	intc.domain = irq_domain_add_linear(node, NUMBER_IRQS * 2,
++					    &armctrl_ops, NULL);
+ 	if (!intc.domain)
+ 		panic("%pOF: unable to create IRQ domain\n", node);
+ 
+@@ -180,6 +209,18 @@ static int __init armctrl_of_init(struct
+ 		set_handle_irq(bcm2835_handle_irq);
+ 	}
+ 
++	/* Make a duplicate irq range which is used to enable FIQ */
++	for (b = 0; b < NR_BANKS; b++) {
++		for (i = 0; i < bank_irqs[b]; i++) {
++			irq = irq_create_mapping(intc.domain,
++					MAKE_HWIRQ(b, i) + NUMBER_IRQS);
++			BUG_ON(irq <= 0);
++			irq_set_chip(irq, &armctrl_chip);
++			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
++		}
++	}
++	init_FIQ(FIQ_START);
++
+ 	return 0;
+ }
+