brcm2708: update 4.1 patches

As usual, this patches were taken (and rebased) from
https://github.com/raspberrypi/linux/commits/rpi-4.1.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47258

1 files changed, 491 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.1/0190-Add-SMI-NAND-driver.patch b/target/linux/brcm2708/patches-4.1/0190-Add-SMI-NAND-driver.patch
new file mode 100644
index 0000000000..c6b40aafd8
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.1/0190-Add-SMI-NAND-driver.patch
@@ -0,0 +1,491 @@
+From 3103b6c1b1a881e55421b7463fb76ad7bdf3974a Mon Sep 17 00:00:00 2001
+From: Luke Wren <wren6991@gmail.com>
+Date: Sat, 5 Sep 2015 01:16:10 +0100
+Subject: [PATCH 190/203] Add SMI NAND driver
+
+Signed-off-by: Luke Wren <wren6991@gmail.com>
+---
+ .../bindings/mtd/brcm,bcm2835-smi-nand.txt         |  42 ++++
+ arch/arm/boot/dts/overlays/Makefile                |   1 +
+ arch/arm/boot/dts/overlays/smi-nand-overlay.dts    |  69 ++++++
+ arch/arm/configs/bcm2709_defconfig                 |   7 +
+ arch/arm/configs/bcmrpi_defconfig                  |   7 +
+ drivers/mtd/nand/Kconfig                           |   7 +
+ drivers/mtd/nand/Makefile                          |   1 +
+ drivers/mtd/nand/bcm2835_smi_nand.c                | 268 +++++++++++++++++++++
+ 8 files changed, 402 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt
+ create mode 100644 arch/arm/boot/dts/overlays/smi-nand-overlay.dts
+ create mode 100644 drivers/mtd/nand/bcm2835_smi_nand.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt
+@@ -0,0 +1,42 @@
++* BCM2835 SMI NAND flash
++
++This driver is a shim between the BCM2835 SMI driver (SMI is a peripheral for
++talking to parallel register interfaces) and Linux's MTD layer.
++
++Required properties:
++- compatible: "brcm,bcm2835-smi-nand"
++- status: "okay"
++
++Optional properties:
++- partition@n, where n is an integer from a consecutive sequence starting at 0
++	- Difficult to store partition table on NAND device - normally put it
++	in the source code, kernel bootparams, or device tree (the best way!)
++	- Sub-properties:
++		- label: the partition name, as shown by mtdinfo /dev/mtd*
++		- reg: the size and offset of this partition.
++		- (optional) read-only: an empty property flagging as read only
++
++Example:
++
++nand: flash@0 {
++	compatible = "brcm,bcm2835-smi-nand";
++	status = "okay";
++
++	partition@0 {
++		label = "stage2";
++		// 128k
++		reg = <0 0x20000>;
++		read-only;
++	};
++	partition@1 {
++		label = "firmware";
++		// 16M
++		reg = <0x20000 0x1000000>;
++		read-only;
++	};
++	partition@2 {
++		label = "root";
++		// 2G
++		reg = <0x1020000 0x80000000>;
++	};
++};
+\ No newline at end of file
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -15,6 +15,7 @@ endif
+ dtb-$(RPI_DT_OVERLAYS) += ads7846-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += smi-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += smi-dev-overlay.dtb
++dtb-$(RPI_DT_OVERLAYS) += smi-nand-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += bmp085_i2c-sensor-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += dht11-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += enc28j60-overlay.dtb
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/smi-nand-overlay.dts
+@@ -0,0 +1,69 @@
++// Description: Overlay to enable NAND flash through
++// the secondary memory interface
++// Author:	Luke Wren
++
++/dts-v1/;
++/plugin/;
++
++/{
++	compatible = "brcm,bcm2708";
++
++	fragment@0 {
++		target = <&smi>;
++		__overlay__ {
++			pinctrl-names = "default";
++			pinctrl-0 = <&smi_pins>;
++			status = "okay";
++		};
++	};
++
++	fragment@1 {
++		target = <&soc>;
++		__overlay__ {
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			nand: flash@0 {
++				compatible = "brcm,bcm2835-smi-nand";
++				smi_handle = <&smi>;
++				#address-cells = <1>;
++				#size-cells = <1>;
++				status = "okay";
++
++				partition@0 {
++					label = "stage2";
++					// 128k
++					reg = <0 0x20000>;
++					read-only;
++				};
++				partition@1 {
++					label = "firmware";
++					// 16M
++					reg = <0x20000 0x1000000>;
++					read-only;
++				};
++				partition@2 {
++					label = "root";
++					// 2G (will need to use 64 bit for >=4G)
++					reg = <0x1020000 0x80000000>;
++				};
++			};
++		};
++	};
++
++	fragment@2 {
++		target = <&gpio>;
++		__overlay__ {
++			smi_pins: smi_pins {
++				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
++					12 13 14 15>;
++				/* Alt 1: SMI */
++				brcm,function = <5 5 5 5 5 5 5 5 5 5 5
++					5 5 5 5 5>;
++				/* /CS, /WE and /OE are pulled high, as they are
++				   generally active low signals */
++				brcm,pull = <2 2 2 2 2 2 2 2 0 0 0 0 0 0 0 0>;
++			};
++		};
++	};
++};
+--- a/arch/arm/configs/bcm2709_defconfig
++++ b/arch/arm/configs/bcm2709_defconfig
+@@ -392,6 +392,10 @@ CONFIG_DEVTMPFS=y
+ CONFIG_DEVTMPFS_MOUNT=y
+ CONFIG_DMA_CMA=y
+ CONFIG_CMA_SIZE_MBYTES=5
++CONFIG_MTD=m
++CONFIG_MTD_BLOCK=m
++CONFIG_MTD_NAND=m
++CONFIG_MTD_UBI=m
+ CONFIG_ZRAM=m
+ CONFIG_ZRAM_LZ4_COMPRESS=y
+ CONFIG_BLK_DEV_LOOP=y
+@@ -1140,6 +1144,9 @@ CONFIG_CONFIGFS_FS=y
+ CONFIG_ECRYPT_FS=m
+ CONFIG_HFS_FS=m
+ CONFIG_HFSPLUS_FS=m
++CONFIG_JFFS2_FS=m
++CONFIG_JFFS2_SUMMARY=y
++CONFIG_UBIFS_FS=m
+ CONFIG_SQUASHFS=m
+ CONFIG_SQUASHFS_XATTR=y
+ CONFIG_SQUASHFS_LZO=y
+--- a/arch/arm/configs/bcmrpi_defconfig
++++ b/arch/arm/configs/bcmrpi_defconfig
+@@ -385,6 +385,10 @@ CONFIG_DEVTMPFS=y
+ CONFIG_DEVTMPFS_MOUNT=y
+ CONFIG_DMA_CMA=y
+ CONFIG_CMA_SIZE_MBYTES=5
++CONFIG_MTD=m
++CONFIG_MTD_BLOCK=m
++CONFIG_MTD_NAND=m
++CONFIG_MTD_UBI=m
+ CONFIG_ZRAM=m
+ CONFIG_ZRAM_LZ4_COMPRESS=y
+ CONFIG_BLK_DEV_LOOP=y
+@@ -1133,6 +1137,9 @@ CONFIG_CONFIGFS_FS=y
+ CONFIG_ECRYPT_FS=m
+ CONFIG_HFS_FS=m
+ CONFIG_HFSPLUS_FS=m
++CONFIG_JFFS2_FS=m
++CONFIG_JFFS2_SUMMARY=y
++CONFIG_UBIFS_FS=m
+ CONFIG_SQUASHFS=m
+ CONFIG_SQUASHFS_XATTR=y
+ CONFIG_SQUASHFS_LZO=y
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -41,6 +41,13 @@ config MTD_SM_COMMON
+ 	tristate
+ 	default n
+ 
++config MTD_NAND_BCM2835_SMI
++        tristate "Use Broadcom's Secondary Memory Interface as a NAND controller (BCM283x)"
++        depends on (MACH_BCM2708 || MACH_BCM2709 || ARCH_BCM2835) && BCM2835_SMI && MTD_NAND
++        default m
++        help
++	  Uses the BCM2835's SMI peripheral as a NAND controller.
++
+ config MTD_NAND_DENALI
+         tristate "Support Denali NAND controller"
+         depends on HAS_DMA
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_NAND_DENALI)		+= denali
+ obj-$(CONFIG_MTD_NAND_DENALI_PCI)	+= denali_pci.o
+ obj-$(CONFIG_MTD_NAND_DENALI_DT)	+= denali_dt.o
+ obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
++obj-$(CONFIG_MTD_NAND_BCM2835_SMI)	+= bcm2835_smi_nand.o
+ obj-$(CONFIG_MTD_NAND_BF5XX)		+= bf5xx_nand.o
+ obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o
+ obj-$(CONFIG_MTD_NAND_DAVINCI)		+= davinci_nand.o
+--- /dev/null
++++ b/drivers/mtd/nand/bcm2835_smi_nand.c
+@@ -0,0 +1,268 @@
++/**
++ * NAND flash driver for Broadcom Secondary Memory Interface
++ *
++ * Written by Luke Wren <luke@raspberrypi.org>
++ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
++
++#include <linux/broadcom/bcm2835_smi.h>
++
++#define DEVICE_NAME "bcm2835-smi-nand"
++#define DRIVER_NAME "smi-nand-bcm2835"
++
++struct bcm2835_smi_nand_host {
++	struct bcm2835_smi_instance *smi_inst;
++	struct nand_chip nand_chip;
++	struct mtd_info mtd;
++	struct device *dev;
++};
++
++/****************************************************************************
++*
++*   NAND functionality implementation
++*
++****************************************************************************/
++
++#define SMI_NAND_CLE_PIN 0x01
++#define SMI_NAND_ALE_PIN 0x02
++
++static inline void bcm2835_smi_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
++					     unsigned int ctrl)
++{
++	uint32_t cmd32 = cmd;
++	uint32_t addr = ~(SMI_NAND_CLE_PIN | SMI_NAND_ALE_PIN);
++	struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent);
++	struct bcm2835_smi_instance *inst = host->smi_inst;
++
++	if (ctrl & NAND_CLE)
++		addr |= SMI_NAND_CLE_PIN;
++	if (ctrl & NAND_ALE)
++		addr |= SMI_NAND_ALE_PIN;
++	/* Lower ALL the CS pins! */
++	if (ctrl & NAND_NCE)
++		addr &= (SMI_NAND_CLE_PIN | SMI_NAND_ALE_PIN);
++
++	bcm2835_smi_set_address(inst, addr);
++
++	if (cmd != NAND_CMD_NONE)
++		bcm2835_smi_write_buf(inst, &cmd32, 1);
++}
++
++static inline uint8_t bcm2835_smi_nand_read_byte(struct mtd_info *mtd)
++{
++	uint8_t byte;
++	struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent);
++	struct bcm2835_smi_instance *inst = host->smi_inst;
++
++	bcm2835_smi_read_buf(inst, &byte, 1);
++	return byte;
++}
++
++static inline void bcm2835_smi_nand_write_byte(struct mtd_info *mtd,
++					       uint8_t byte)
++{
++	struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent);
++	struct bcm2835_smi_instance *inst = host->smi_inst;
++
++	bcm2835_smi_write_buf(inst, &byte, 1);
++}
++
++static inline void bcm2835_smi_nand_write_buf(struct mtd_info *mtd,
++					      const uint8_t *buf, int len)
++{
++	struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent);
++	struct bcm2835_smi_instance *inst = host->smi_inst;
++
++	bcm2835_smi_write_buf(inst, buf, len);
++}
++
++static inline void bcm2835_smi_nand_read_buf(struct mtd_info *mtd,
++					     uint8_t *buf, int len)
++{
++	struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent);
++	struct bcm2835_smi_instance *inst = host->smi_inst;
++
++	bcm2835_smi_read_buf(inst, buf, len);
++}
++
++/****************************************************************************
++*
++*   Probe and remove functions
++*
++***************************************************************************/
++
++static int bcm2835_smi_nand_probe(struct platform_device *pdev)
++{
++	struct bcm2835_smi_nand_host *host;
++	struct nand_chip *this;
++	struct mtd_info *mtd;
++	struct device *dev = &pdev->dev;
++	struct device_node *node = dev->of_node, *smi_node;
++	struct mtd_part_parser_data ppdata;
++	struct smi_settings *smi_settings;
++	struct bcm2835_smi_instance *smi_inst;
++	int ret = -ENXIO;
++
++	if (!node) {
++		dev_err(dev, "No device tree node supplied!");
++		return -EINVAL;
++	}
++
++	smi_node = of_parse_phandle(node, "smi_handle", 0);
++
++	/* Request use of SMI peripheral: */
++	smi_inst = bcm2835_smi_get(smi_node);
++
++	if (!smi_inst) {
++		dev_err(dev, "Could not register with SMI.");
++		return -EPROBE_DEFER;
++	}
++
++	/* Set SMI timing and bus width */
++
++	smi_settings = bcm2835_smi_get_settings_from_regs(smi_inst);
++
++	smi_settings->data_width = SMI_WIDTH_8BIT;
++	smi_settings->read_setup_time = 2;
++	smi_settings->read_hold_time = 1;
++	smi_settings->read_pace_time = 1;
++	smi_settings->read_strobe_time = 3;
++
++	smi_settings->write_setup_time = 2;
++	smi_settings->write_hold_time = 1;
++	smi_settings->write_pace_time = 1;
++	smi_settings->write_strobe_time = 3;
++
++	bcm2835_smi_set_regs_from_settings(smi_inst);
++
++	host = devm_kzalloc(dev, sizeof(struct bcm2835_smi_nand_host),
++		GFP_KERNEL);
++	if (!host)
++		return -ENOMEM;
++
++	host->dev = dev;
++	host->smi_inst = smi_inst;
++
++	platform_set_drvdata(pdev, host);
++
++	/* Link the structures together */
++
++	this = &host->nand_chip;
++	mtd = &host->mtd;
++	mtd->priv = this;
++	mtd->owner = THIS_MODULE;
++	mtd->dev.parent = dev;
++	mtd->name = DRIVER_NAME;
++	ppdata.of_node = node;
++
++	/* 20 us command delay time... */
++	this->chip_delay = 20;
++
++	this->priv = host;
++	this->cmd_ctrl = bcm2835_smi_nand_cmd_ctrl;
++	this->read_byte = bcm2835_smi_nand_read_byte;
++	this->write_byte = bcm2835_smi_nand_write_byte;
++	this->write_buf = bcm2835_smi_nand_write_buf;
++	this->read_buf = bcm2835_smi_nand_read_buf;
++
++	this->ecc.mode = NAND_ECC_SOFT;
++
++	/* Should never be accessed directly: */
++
++	this->IO_ADDR_R = (void *)0xdeadbeef;
++	this->IO_ADDR_W = (void *)0xdeadbeef;
++
++	/* First scan to find the device and get the page size */
++
++	if (nand_scan_ident(mtd, 1, NULL))
++		return -ENXIO;
++
++	/* Second phase scan */
++
++	if (nand_scan_tail(mtd))
++		return -ENXIO;
++
++	ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
++	if (!ret)
++		return 0;
++
++	nand_release(mtd);
++	return -EINVAL;
++}
++
++static int bcm2835_smi_nand_remove(struct platform_device *pdev)
++{
++	struct bcm2835_smi_nand_host *host = platform_get_drvdata(pdev);
++
++	nand_release(&host->mtd);
++
++	return 0;
++}
++
++/****************************************************************************
++*
++*   Register the driver with device tree
++*
++***************************************************************************/
++
++static const struct of_device_id bcm2835_smi_nand_of_match[] = {
++	{.compatible = "brcm,bcm2835-smi-nand",},
++	{ /* sentinel */ }
++};
++
++MODULE_DEVICE_TABLE(of, bcm2835_smi_nand_of_match);
++
++static struct platform_driver bcm2835_smi_nand_driver = {
++	.probe = bcm2835_smi_nand_probe,
++	.remove = bcm2835_smi_nand_remove,
++	.driver = {
++		.name = DRIVER_NAME,
++		.owner = THIS_MODULE,
++		.of_match_table = bcm2835_smi_nand_of_match,
++	},
++};
++
++module_platform_driver(bcm2835_smi_nand_driver);
++
++MODULE_ALIAS("platform:smi-nand-bcm2835");
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION
++	("Driver for NAND chips using Broadcom Secondary Memory Interface");
++MODULE_AUTHOR("Luke Wren <luke@raspberrypi.org>");