aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2016-02-25 10:14:05 +0000
committerJohn Crispin <john@openwrt.org>2016-02-25 10:14:05 +0000
commit0834f9f07631a8857a96614e37cb21e1dc84ffb4 (patch)
treec62e777de69d8397ed7870991bc46d5648a20046 /target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch
parentb3dc9566a46efa67951ff6ae28e4397da9db92af (diff)
downloadupstream-0834f9f07631a8857a96614e37cb21e1dc84ffb4.tar.gz
upstream-0834f9f07631a8857a96614e37cb21e1dc84ffb4.tar.bz2
upstream-0834f9f07631a8857a96614e37cb21e1dc84ffb4.zip
brcm2708: remove linux 4.1 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48766
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch')
-rw-r--r--target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch423
1 files changed, 0 insertions, 423 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch b/target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch
deleted file mode 100644
index 39c35564d1..0000000000
--- a/target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch
+++ /dev/null
@@ -1,423 +0,0 @@
-From 5d9c0e4f54ea08a98408e195dacc33e11ea4a25e Mon Sep 17 00:00:00 2001
-From: Martin Sperl <kernel@martin.sperl.org>
-Date: Sun, 10 May 2015 20:47:28 +0000
-Subject: [PATCH 156/222] spi: bcm2835: enable dma modes for transfers meeting
- certain conditions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Conditions per spi_transfer are:
-* transfer.len >= 96 bytes (to avoid mapping overhead costs)
-* transfer.len < 65536 bytes (limitaion by spi-hw block - could get extended)
-* an individual scatter/gather transfer length must be a multiple of 4
- for anything but the last transfer - spi-hw block limit.
- (some shortcut has been taken in can_dma to avoid unnecessary mapping of
- pages which, for which there is a chance that there is a split with a
- transfer length not a multiple of 4)
-
-If it becomes a necessity these restrictions can get removed by additional
-code.
-
-Note that this patch requires a patch to dma-bcm2835.c by Noralf to
-enable scatter-gather mode inside the dmaengine, which has not been
-merged yet.
-
-That is why no patch to arch/arm/boot/dts/bcm2835.dtsi is included - the
-code works as before without dma when tx/rx are not set, but it writes
-a message warning about dma not used:
-spi-bcm2835 20204000.spi: no tx-dma configuration found - not using dma mode
-
-To enable dma-mode add the following lines to the device-tree:
- dmas = <&dma 6>, <&dma 7>;
- dma-names = "tx", "rx";
-
-Tested-by: Noralf Trønnes <noralf@tronnes.org> (private communication)
-Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
-Signed-off-by: Mark Brown <broonie@kernel.org>
-(cherry picked from commit 3ecd37edaa2a6ba3246e2c35714be9316b1087fe)
----
- drivers/spi/spi-bcm2835.c | 303 +++++++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 301 insertions(+), 2 deletions(-)
-
---- a/drivers/spi/spi-bcm2835.c
-+++ b/drivers/spi/spi-bcm2835.c
-@@ -23,15 +23,18 @@
- #include <linux/clk.h>
- #include <linux/completion.h>
- #include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmaengine.h>
- #include <linux/err.h>
- #include <linux/interrupt.h>
- #include <linux/io.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/of.h>
--#include <linux/of_irq.h>
--#include <linux/of_gpio.h>
-+#include <linux/of_address.h>
- #include <linux/of_device.h>
-+#include <linux/of_gpio.h>
-+#include <linux/of_irq.h>
- #include <linux/spi/spi.h>
-
- /* SPI register offsets */
-@@ -70,6 +73,7 @@
-
- #define BCM2835_SPI_POLLING_LIMIT_US 30
- #define BCM2835_SPI_POLLING_JIFFIES 2
-+#define BCM2835_SPI_DMA_MIN_LENGTH 96
- #define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
- | SPI_NO_CS | SPI_3WIRE)
-
-@@ -83,6 +87,7 @@ struct bcm2835_spi {
- u8 *rx_buf;
- int tx_len;
- int rx_len;
-+ bool dma_pending;
- };
-
- static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg)
-@@ -128,12 +133,15 @@ static void bcm2835_spi_reset_hw(struct
- /* Disable SPI interrupts and transfer */
- cs &= ~(BCM2835_SPI_CS_INTR |
- BCM2835_SPI_CS_INTD |
-+ BCM2835_SPI_CS_DMAEN |
- BCM2835_SPI_CS_TA);
- /* and reset RX/TX FIFOS */
- cs |= BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX;
-
- /* and reset the SPI_HW */
- bcm2835_wr(bs, BCM2835_SPI_CS, cs);
-+ /* as well as DLEN */
-+ bcm2835_wr(bs, BCM2835_SPI_DLEN, 0);
- }
-
- static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
-@@ -193,6 +201,279 @@ static int bcm2835_spi_transfer_one_irq(
- return 1;
- }
-
-+/*
-+ * DMA support
-+ *
-+ * this implementation has currently a few issues in so far as it does
-+ * not work arrount limitations of the HW.
-+ *
-+ * the main one being that DMA transfers are limited to 16 bit
-+ * (so 0 to 65535 bytes) by the SPI HW due to BCM2835_SPI_DLEN
-+ *
-+ * also we currently assume that the scatter-gather fragments are
-+ * all multiple of 4 (except the last) - otherwise we would need
-+ * to reset the FIFO before subsequent transfers...
-+ * this also means that tx/rx transfers sg's need to be of equal size!
-+ *
-+ * there may be a few more border-cases we may need to address as well
-+ * but unfortunately this would mean splitting up the scatter-gather
-+ * list making it slightly unpractical...
-+ */
-+static void bcm2835_spi_dma_done(void *data)
-+{
-+ struct spi_master *master = data;
-+ struct bcm2835_spi *bs = spi_master_get_devdata(master);
-+
-+ /* reset fifo and HW */
-+ bcm2835_spi_reset_hw(master);
-+
-+ /* and terminate tx-dma as we do not have an irq for it
-+ * because when the rx dma will terminate and this callback
-+ * is called the tx-dma must have finished - can't get to this
-+ * situation otherwise...
-+ */
-+ dmaengine_terminate_all(master->dma_tx);
-+
-+ /* mark as no longer pending */
-+ bs->dma_pending = 0;
-+
-+ /* and mark as completed */;
-+ complete(&master->xfer_completion);
-+}
-+
-+static int bcm2835_spi_prepare_sg(struct spi_master *master,
-+ struct spi_transfer *tfr,
-+ bool is_tx)
-+{
-+ struct dma_chan *chan;
-+ struct scatterlist *sgl;
-+ unsigned int nents;
-+ enum dma_transfer_direction dir;
-+ unsigned long flags;
-+
-+ struct dma_async_tx_descriptor *desc;
-+ dma_cookie_t cookie;
-+
-+ if (is_tx) {
-+ dir = DMA_MEM_TO_DEV;
-+ chan = master->dma_tx;
-+ nents = tfr->tx_sg.nents;
-+ sgl = tfr->tx_sg.sgl;
-+ flags = 0 /* no tx interrupt */;
-+
-+ } else {
-+ dir = DMA_DEV_TO_MEM;
-+ chan = master->dma_rx;
-+ nents = tfr->rx_sg.nents;
-+ sgl = tfr->rx_sg.sgl;
-+ flags = DMA_PREP_INTERRUPT;
-+ }
-+ /* prepare the channel */
-+ desc = dmaengine_prep_slave_sg(chan, sgl, nents, dir, flags);
-+ if (!desc)
-+ return -EINVAL;
-+
-+ /* set callback for rx */
-+ if (!is_tx) {
-+ desc->callback = bcm2835_spi_dma_done;
-+ desc->callback_param = master;
-+ }
-+
-+ /* submit it to DMA-engine */
-+ cookie = dmaengine_submit(desc);
-+
-+ return dma_submit_error(cookie);
-+}
-+
-+static inline int bcm2835_check_sg_length(struct sg_table *sgt)
-+{
-+ int i;
-+ struct scatterlist *sgl;
-+
-+ /* check that the sg entries are word-sized (except for last) */
-+ for_each_sg(sgt->sgl, sgl, (int)sgt->nents - 1, i) {
-+ if (sg_dma_len(sgl) % 4)
-+ return -EFAULT;
-+ }
-+
-+ return 0;
-+}
-+
-+static int bcm2835_spi_transfer_one_dma(struct spi_master *master,
-+ struct spi_device *spi,
-+ struct spi_transfer *tfr,
-+ u32 cs)
-+{
-+ struct bcm2835_spi *bs = spi_master_get_devdata(master);
-+ int ret;
-+
-+ /* check that the scatter gather segments are all a multiple of 4 */
-+ if (bcm2835_check_sg_length(&tfr->tx_sg) ||
-+ bcm2835_check_sg_length(&tfr->rx_sg)) {
-+ dev_warn_once(&spi->dev,
-+ "scatter gather segment length is not a multiple of 4 - falling back to interrupt mode\n");
-+ return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs);
-+ }
-+
-+ /* setup tx-DMA */
-+ ret = bcm2835_spi_prepare_sg(master, tfr, true);
-+ if (ret)
-+ return ret;
-+
-+ /* start TX early */
-+ dma_async_issue_pending(master->dma_tx);
-+
-+ /* mark as dma pending */
-+ bs->dma_pending = 1;
-+
-+ /* set the DMA length */
-+ bcm2835_wr(bs, BCM2835_SPI_DLEN, tfr->len);
-+
-+ /* start the HW */
-+ bcm2835_wr(bs, BCM2835_SPI_CS,
-+ cs | BCM2835_SPI_CS_TA | BCM2835_SPI_CS_DMAEN);
-+
-+ /* setup rx-DMA late - to run transfers while
-+ * mapping of the rx buffers still takes place
-+ * this saves 10us or more.
-+ */
-+ ret = bcm2835_spi_prepare_sg(master, tfr, false);
-+ if (ret) {
-+ /* need to reset on errors */
-+ dmaengine_terminate_all(master->dma_tx);
-+ bcm2835_spi_reset_hw(master);
-+ return ret;
-+ }
-+
-+ /* start rx dma late */
-+ dma_async_issue_pending(master->dma_rx);
-+
-+ /* wait for wakeup in framework */
-+ return 1;
-+}
-+
-+static bool bcm2835_spi_can_dma(struct spi_master *master,
-+ struct spi_device *spi,
-+ struct spi_transfer *tfr)
-+{
-+ /* only run for gpio_cs */
-+ if (!gpio_is_valid(spi->cs_gpio))
-+ return false;
-+
-+ /* we start DMA efforts only on bigger transfers */
-+ if (tfr->len < BCM2835_SPI_DMA_MIN_LENGTH)
-+ return false;
-+
-+ /* BCM2835_SPI_DLEN has defined a max transfer size as
-+ * 16 bit, so max is 65535
-+ * we can revisit this by using an alternative transfer
-+ * method - ideally this would get done without any more
-+ * interaction...
-+ */
-+ if (tfr->len > 65535) {
-+ dev_warn_once(&spi->dev,
-+ "transfer size of %d too big for dma-transfer\n",
-+ tfr->len);
-+ return false;
-+ }
-+
-+ /* if we run rx/tx_buf with word aligned addresses then we are OK */
-+ if (((u32)tfr->tx_buf % 4 == 0) && ((u32)tfr->tx_buf % 4 == 0))
-+ return true;
-+
-+ /* otherwise we only allow transfers within the same page
-+ * to avoid wasting time on dma_mapping when it is not practical
-+ */
-+ if (((u32)tfr->tx_buf % SZ_4K) + tfr->len > SZ_4K) {
-+ dev_warn_once(&spi->dev,
-+ "Unaligned spi tx-transfer bridging page\n");
-+ return false;
-+ }
-+ if (((u32)tfr->rx_buf % SZ_4K) + tfr->len > SZ_4K) {
-+ dev_warn_once(&spi->dev,
-+ "Unaligned spi tx-transfer bridging page\n");
-+ return false;
-+ }
-+
-+ /* return OK */
-+ return true;
-+}
-+
-+void bcm2835_dma_release(struct spi_master *master)
-+{
-+ if (master->dma_tx) {
-+ dmaengine_terminate_all(master->dma_tx);
-+ dma_release_channel(master->dma_tx);
-+ master->dma_tx = NULL;
-+ }
-+ if (master->dma_rx) {
-+ dmaengine_terminate_all(master->dma_rx);
-+ dma_release_channel(master->dma_rx);
-+ master->dma_rx = NULL;
-+ }
-+}
-+
-+void bcm2835_dma_init(struct spi_master *master, struct device *dev)
-+{
-+ struct dma_slave_config slave_config;
-+ const __be32 *addr;
-+ dma_addr_t dma_reg_base;
-+ int ret;
-+
-+ /* base address in dma-space */
-+ addr = of_get_address(master->dev.of_node, 0, NULL, NULL);
-+ if (!addr) {
-+ dev_err(dev, "could not get DMA-register address - not using dma mode\n");
-+ goto err;
-+ }
-+ dma_reg_base = be32_to_cpup(addr);
-+
-+ /* get tx/rx dma */
-+ master->dma_tx = dma_request_slave_channel(dev, "tx");
-+ if (!master->dma_tx) {
-+ dev_err(dev, "no tx-dma configuration found - not using dma mode\n");
-+ goto err;
-+ }
-+ master->dma_rx = dma_request_slave_channel(dev, "rx");
-+ if (!master->dma_rx) {
-+ dev_err(dev, "no rx-dma configuration found - not using dma mode\n");
-+ goto err_release;
-+ }
-+
-+ /* configure DMAs */
-+ slave_config.direction = DMA_MEM_TO_DEV;
-+ slave_config.dst_addr = (u32)(dma_reg_base + BCM2835_SPI_FIFO);
-+ slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+
-+ ret = dmaengine_slave_config(master->dma_tx, &slave_config);
-+ if (ret)
-+ goto err_config;
-+
-+ slave_config.direction = DMA_DEV_TO_MEM;
-+ slave_config.src_addr = (u32)(dma_reg_base + BCM2835_SPI_FIFO);
-+ slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+
-+ ret = dmaengine_slave_config(master->dma_rx, &slave_config);
-+ if (ret)
-+ goto err_config;
-+
-+ /* all went well, so set can_dma */
-+ master->can_dma = bcm2835_spi_can_dma;
-+ master->max_dma_len = 65535; /* limitation by BCM2835_SPI_DLEN */
-+ /* need to do TX AND RX DMA, so we need dummy buffers */
-+ master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
-+
-+ return;
-+
-+err_config:
-+ dev_err(dev, "issue configuring dma: %d - not using DMA mode\n",
-+ ret);
-+err_release:
-+ bcm2835_dma_release(master);
-+err:
-+ return;
-+}
-+
- static int bcm2835_spi_transfer_one_poll(struct spi_master *master,
- struct spi_device *spi,
- struct spi_transfer *tfr,
-@@ -299,6 +580,11 @@ static int bcm2835_spi_transfer_one(stru
- return bcm2835_spi_transfer_one_poll(master, spi, tfr,
- cs, xfer_time_us);
-
-+ /* run in dma mode if conditions are right */
-+ if (master->can_dma && bcm2835_spi_can_dma(master, spi, tfr))
-+ return bcm2835_spi_transfer_one_dma(master, spi, tfr, cs);
-+
-+ /* run in interrupt-mode */
- return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs);
- }
-
-@@ -324,6 +610,15 @@ static int bcm2835_spi_prepare_message(s
- static void bcm2835_spi_handle_err(struct spi_master *master,
- struct spi_message *msg)
- {
-+ struct bcm2835_spi *bs = spi_master_get_devdata(master);
-+
-+ /* if an error occurred and we have an active dma, then terminate */
-+ if (bs->dma_pending) {
-+ dmaengine_terminate_all(master->dma_tx);
-+ dmaengine_terminate_all(master->dma_rx);
-+ bs->dma_pending = 0;
-+ }
-+ /* and reset */
- bcm2835_spi_reset_hw(master);
- }
-
-@@ -523,6 +818,8 @@ static int bcm2835_spi_probe(struct plat
- goto out_clk_disable;
- }
-
-+ bcm2835_dma_init(master, &pdev->dev);
-+
- /* initialise the hardware with the default polarities */
- bcm2835_wr(bs, BCM2835_SPI_CS,
- BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
-@@ -553,6 +850,8 @@ static int bcm2835_spi_remove(struct pla
-
- clk_disable_unprepare(bs->clk);
-
-+ bcm2835_dma_release(master);
-+
- return 0;
- }
-