diff options
author | John Crispin <john@openwrt.org> | 2015-07-17 12:48:39 +0000 |
---|---|---|
committer | John Crispin <john@openwrt.org> | 2015-07-17 12:48:39 +0000 |
commit | 208ab54e3e9516dd9fcf1ce197950044e0bebd90 (patch) | |
tree | 425580d694235f06661dd2d6763925a1f69279c6 /target/linux/brcm2708/patches-4.1/0031-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch | |
parent | 03b56c9350057ee77cfe2b8bb8f8d7146917fb79 (diff) | |
download | upstream-208ab54e3e9516dd9fcf1ce197950044e0bebd90.tar.gz upstream-208ab54e3e9516dd9fcf1ce197950044e0bebd90.tar.bz2 upstream-208ab54e3e9516dd9fcf1ce197950044e0bebd90.zip |
brcm2708: add linux 4.1 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46399
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0031-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch')
-rw-r--r-- | target/linux/brcm2708/patches-4.1/0031-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch | 386 |
1 files changed, 386 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0031-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch b/target/linux/brcm2708/patches-4.1/0031-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch new file mode 100644 index 0000000000..c0ce3b744e --- /dev/null +++ b/target/linux/brcm2708/patches-4.1/0031-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch @@ -0,0 +1,386 @@ +From 9c50f6318fdf116e5abaeb05bffa0b65e48ba259 Mon Sep 17 00:00:00 2001 +From: popcornmix <popcornmix@gmail.com> +Date: Wed, 8 May 2013 11:46:50 +0100 +Subject: [PATCH 031/121] enabling the realtime clock 1-wire chip DS1307 and + 1-wire on GPIO4 (as a module) + +1-wire: Add support for configuring pin for w1-gpio kernel module +See: https://github.com/raspberrypi/linux/pull/457 + +Add bitbanging pullups, use them for w1-gpio + +Allows parasite power to work, uses module option pullup=1 + +bcm2708: Ensure 1-wire pullup is disabled by default, and expose as module parameter + +Signed-off-by: Alex J Lennon <ajlennon@dynamicdevices.co.uk> + +w1-gpio: Add gpiopin module parameter and correctly free up gpio pull-up pin, if set + +Signed-off-by: Alex J Lennon <ajlennon@dynamicdevices.co.uk> + +w1-gpio: Sort out the pullup/parasitic power tangle +--- + arch/arm/mach-bcm2708/bcm2708.c | 29 +++++++++++++++++ + arch/arm/mach-bcm2709/bcm2709.c | 29 +++++++++++++++++ + drivers/w1/masters/w1-gpio.c | 69 +++++++++++++++++++++++++++++++++++++---- + drivers/w1/w1.h | 6 ++++ + drivers/w1/w1_int.c | 14 +++++++++ + drivers/w1/w1_io.c | 18 +++++++++-- + include/linux/w1-gpio.h | 1 + + 7 files changed, 157 insertions(+), 9 deletions(-) + +--- a/arch/arm/mach-bcm2708/bcm2708.c ++++ b/arch/arm/mach-bcm2708/bcm2708.c +@@ -36,6 +36,7 @@ + #include <linux/of_platform.h> + #include <linux/spi/spi.h> + #include <linux/gpio/machine.h> ++#include <linux/w1-gpio.h> + + #include <linux/version.h> + #include <linux/clkdev.h> +@@ -77,12 +78,19 @@ + */ + #define DMA_MASK_BITS_COMMON 32 + ++// use GPIO 4 for the one-wire GPIO pin, if enabled ++#define W1_GPIO 4 ++// ensure one-wire GPIO pullup is disabled by default ++#define W1_PULLUP -1 ++ + /* command line parameters */ + static unsigned boardrev, serial; + static unsigned uart_clock = UART0_CLOCK; + static unsigned disk_led_gpio = 16; + static unsigned disk_led_active_low = 1; + static unsigned reboot_part = 0; ++static unsigned w1_gpio_pin = W1_GPIO; ++static unsigned w1_gpio_pullup = W1_PULLUP; + static bool vc_i2c_override = false; + + static unsigned use_dt = 0; +@@ -303,6 +311,20 @@ static struct platform_device bcm2708_dm + .num_resources = ARRAY_SIZE(bcm2708_dmaengine_resources), + }; + ++#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) ++static struct w1_gpio_platform_data w1_gpio_pdata = { ++ .pin = W1_GPIO, ++ .ext_pullup_enable_pin = W1_PULLUP, ++ .is_open_drain = 0, ++}; ++ ++static struct platform_device w1_device = { ++ .name = "w1-gpio", ++ .id = -1, ++ .dev.platform_data = &w1_gpio_pdata, ++}; ++#endif ++ + static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); + + static struct platform_device bcm2708_fb_device = { +@@ -729,6 +751,11 @@ void __init bcm2708_init(void) + #ifdef CONFIG_BCM2708_GPIO + bcm_register_device_dt(&bcm2708_gpio_device); + #endif ++#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) ++ w1_gpio_pdata.pin = w1_gpio_pin; ++ w1_gpio_pdata.ext_pullup_enable_pin = w1_gpio_pullup; ++ bcm_register_device_dt(&w1_device); ++#endif + bcm_register_device_dt(&bcm2708_fb_device); + bcm_register_device_dt(&bcm2708_usb_device); + +@@ -942,5 +969,7 @@ module_param(uart_clock, uint, 0644); + module_param(disk_led_gpio, uint, 0644); + module_param(disk_led_active_low, uint, 0644); + module_param(reboot_part, uint, 0644); ++module_param(w1_gpio_pin, uint, 0644); ++module_param(w1_gpio_pullup, uint, 0644); + module_param(vc_i2c_override, bool, 0644); + MODULE_PARM_DESC(vc_i2c_override, "Allow the use of VC's I2C peripheral."); +--- a/arch/arm/mach-bcm2709/bcm2709.c ++++ b/arch/arm/mach-bcm2709/bcm2709.c +@@ -36,6 +36,7 @@ + #include <linux/of_platform.h> + #include <linux/spi/spi.h> + #include <linux/gpio/machine.h> ++#include <linux/w1-gpio.h> + + #include <linux/version.h> + #include <linux/clkdev.h> +@@ -79,12 +80,19 @@ + */ + #define DMA_MASK_BITS_COMMON 32 + ++// use GPIO 4 for the one-wire GPIO pin, if enabled ++#define W1_GPIO 4 ++// ensure one-wire GPIO pullup is disabled by default ++#define W1_PULLUP -1 ++ + /* command line parameters */ + static unsigned boardrev, serial; + static unsigned uart_clock = UART0_CLOCK; + static unsigned disk_led_gpio = 16; + static unsigned disk_led_active_low = 1; + static unsigned reboot_part = 0; ++static unsigned w1_gpio_pin = W1_GPIO; ++static unsigned w1_gpio_pullup = W1_PULLUP; + static bool vc_i2c_override = false; + + static unsigned use_dt = 0; +@@ -313,6 +321,20 @@ static struct platform_device bcm2708_dm + .num_resources = ARRAY_SIZE(bcm2708_dmaengine_resources), + }; + ++#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) ++static struct w1_gpio_platform_data w1_gpio_pdata = { ++ .pin = W1_GPIO, ++ .ext_pullup_enable_pin = W1_PULLUP, ++ .is_open_drain = 0, ++}; ++ ++static struct platform_device w1_device = { ++ .name = "w1-gpio", ++ .id = -1, ++ .dev.platform_data = &w1_gpio_pdata, ++}; ++#endif ++ + static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); + + static struct platform_device bcm2708_fb_device = { +@@ -749,6 +771,11 @@ void __init bcm2709_init(void) + #ifdef CONFIG_BCM2708_GPIO + bcm_register_device_dt(&bcm2708_gpio_device); + #endif ++#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) ++ w1_gpio_pdata.pin = w1_gpio_pin; ++ w1_gpio_pdata.ext_pullup_enable_pin = w1_gpio_pullup; ++ bcm_register_device_dt(&w1_device); ++#endif + bcm_register_device_dt(&bcm2708_fb_device); + bcm_register_device_dt(&bcm2708_usb_device); + +@@ -1110,5 +1137,7 @@ module_param(uart_clock, uint, 0644); + module_param(disk_led_gpio, uint, 0644); + module_param(disk_led_active_low, uint, 0644); + module_param(reboot_part, uint, 0644); ++module_param(w1_gpio_pin, uint, 0644); ++module_param(w1_gpio_pullup, uint, 0644); + module_param(vc_i2c_override, bool, 0644); + MODULE_PARM_DESC(vc_i2c_override, "Allow the use of VC's I2C peripheral."); +--- a/drivers/w1/masters/w1-gpio.c ++++ b/drivers/w1/masters/w1-gpio.c +@@ -23,6 +23,19 @@ + #include "../w1.h" + #include "../w1_int.h" + ++static int w1_gpio_pullup = 0; ++static int w1_gpio_pullup_orig = 0; ++module_param_named(pullup, w1_gpio_pullup, int, 0); ++MODULE_PARM_DESC(pullup, "Enable parasitic power (power on data) mode"); ++static int w1_gpio_pullup_pin = -1; ++static int w1_gpio_pullup_pin_orig = -1; ++module_param_named(extpullup, w1_gpio_pullup_pin, int, 0); ++MODULE_PARM_DESC(extpullup, "GPIO external pullup pin number"); ++static int w1_gpio_pin = -1; ++static int w1_gpio_pin_orig = -1; ++module_param_named(gpiopin, w1_gpio_pin, int, 0); ++MODULE_PARM_DESC(gpiopin, "GPIO pin number"); ++ + static u8 w1_gpio_set_pullup(void *data, int delay) + { + struct w1_gpio_platform_data *pdata = data; +@@ -67,6 +80,16 @@ static u8 w1_gpio_read_bit(void *data) + return gpio_get_value(pdata->pin) ? 1 : 0; + } + ++static void w1_gpio_bitbang_pullup(void *data, u8 on) ++{ ++ struct w1_gpio_platform_data *pdata = data; ++ ++ if (on) ++ gpio_direction_output(pdata->pin, 1); ++ else ++ gpio_direction_input(pdata->pin); ++} ++ + #if defined(CONFIG_OF) + static const struct of_device_id w1_gpio_dt_ids[] = { + { .compatible = "w1-gpio" }, +@@ -80,6 +103,7 @@ static int w1_gpio_probe_dt(struct platf + struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node *np = pdev->dev.of_node; + int gpio; ++ u32 value; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) +@@ -88,6 +112,9 @@ static int w1_gpio_probe_dt(struct platf + if (of_get_property(np, "linux,open-drain", NULL)) + pdata->is_open_drain = 1; + ++ if (of_property_read_u32(np, "rpi,parasitic-power", &value) == 0) ++ pdata->parasitic_power = (value != 0); ++ + gpio = of_get_gpio(np, 0); + if (gpio < 0) { + if (gpio != -EPROBE_DEFER) +@@ -103,7 +130,7 @@ static int w1_gpio_probe_dt(struct platf + if (gpio == -EPROBE_DEFER) + return gpio; + /* ignore other errors as the pullup gpio is optional */ +- pdata->ext_pullup_enable_pin = gpio; ++ pdata->ext_pullup_enable_pin = (gpio >= 0) ? gpio : -1; + + pdev->dev.platform_data = pdata; + +@@ -113,13 +140,15 @@ static int w1_gpio_probe_dt(struct platf + static int w1_gpio_probe(struct platform_device *pdev) + { + struct w1_bus_master *master; +- struct w1_gpio_platform_data *pdata; ++ struct w1_gpio_platform_data *pdata = pdev->dev.platform_data; + int err; + +- if (of_have_populated_dt()) { +- err = w1_gpio_probe_dt(pdev); +- if (err < 0) +- return err; ++ if(pdata == NULL) { ++ if (of_have_populated_dt()) { ++ err = w1_gpio_probe_dt(pdev); ++ if (err < 0) ++ return err; ++ } + } + + pdata = dev_get_platdata(&pdev->dev); +@@ -136,6 +165,22 @@ static int w1_gpio_probe(struct platform + return -ENOMEM; + } + ++ w1_gpio_pin_orig = pdata->pin; ++ w1_gpio_pullup_pin_orig = pdata->ext_pullup_enable_pin; ++ w1_gpio_pullup_orig = pdata->parasitic_power; ++ ++ if(gpio_is_valid(w1_gpio_pin)) { ++ pdata->pin = w1_gpio_pin; ++ pdata->ext_pullup_enable_pin = -1; ++ pdata->parasitic_power = -1; ++ } ++ pdata->parasitic_power |= w1_gpio_pullup; ++ if(gpio_is_valid(w1_gpio_pullup_pin)) { ++ pdata->ext_pullup_enable_pin = w1_gpio_pullup_pin; ++ } ++ ++ dev_info(&pdev->dev, "gpio pin %d, external pullup pin %d, parasitic power %d\n", pdata->pin, pdata->ext_pullup_enable_pin, pdata->parasitic_power); ++ + err = devm_gpio_request(&pdev->dev, pdata->pin, "w1"); + if (err) { + dev_err(&pdev->dev, "gpio_request (pin) failed\n"); +@@ -165,6 +210,14 @@ static int w1_gpio_probe(struct platform + master->set_pullup = w1_gpio_set_pullup; + } + ++ if (pdata->parasitic_power) { ++ if (pdata->is_open_drain) ++ printk(KERN_ERR "w1-gpio 'pullup'(parasitic power) " ++ "option doesn't work with open drain GPIO\n"); ++ else ++ master->bitbang_pullup = w1_gpio_bitbang_pullup; ++ } ++ + err = w1_add_master_device(master); + if (err) { + dev_err(&pdev->dev, "w1_add_master device failed\n"); +@@ -195,6 +248,10 @@ static int w1_gpio_remove(struct platfor + + w1_remove_master_device(master); + ++ pdata->pin = w1_gpio_pin_orig; ++ pdata->ext_pullup_enable_pin = w1_gpio_pullup_pin_orig; ++ pdata->parasitic_power = w1_gpio_pullup_orig; ++ + return 0; + } + +--- a/drivers/w1/w1.h ++++ b/drivers/w1/w1.h +@@ -171,6 +171,12 @@ struct w1_bus_master + + u8 (*set_pullup)(void *, int); + ++ /** ++ * Turns the pullup on/off in bitbanging mode, takes an on/off argument. ++ * @return -1=Error, 0=completed ++ */ ++ void (*bitbang_pullup) (void *, u8); ++ + void (*search)(void *, struct w1_master *, + u8, w1_slave_found_callback); + }; +--- a/drivers/w1/w1_int.c ++++ b/drivers/w1/w1_int.c +@@ -123,6 +123,20 @@ int w1_add_master_device(struct w1_bus_m + return(-EINVAL); + } + ++ /* bitbanging hardware uses bitbang_pullup, other hardware uses set_pullup ++ * and takes care of timing itself */ ++ if (!master->write_byte && !master->touch_bit && master->set_pullup) { ++ printk(KERN_ERR "w1_add_master_device: set_pullup requires " ++ "write_byte or touch_bit, disabling\n"); ++ master->set_pullup = NULL; ++ } ++ ++ if (master->set_pullup && master->bitbang_pullup) { ++ printk(KERN_ERR "w1_add_master_device: set_pullup should not " ++ "be set when bitbang_pullup is used, disabling\n"); ++ master->set_pullup = NULL; ++ } ++ + /* Lock until the device is added (or not) to w1_masters. */ + mutex_lock(&w1_mlock); + /* Search for the first available id (starting at 1). */ +--- a/drivers/w1/w1_io.c ++++ b/drivers/w1/w1_io.c +@@ -134,10 +134,22 @@ static void w1_pre_write(struct w1_maste + static void w1_post_write(struct w1_master *dev) + { + if (dev->pullup_duration) { +- if (dev->enable_pullup && dev->bus_master->set_pullup) +- dev->bus_master->set_pullup(dev->bus_master->data, 0); +- else ++ if (dev->enable_pullup) { ++ if (dev->bus_master->set_pullup) { ++ dev->bus_master->set_pullup(dev-> ++ bus_master->data, ++ 0); ++ } else if (dev->bus_master->bitbang_pullup) { ++ dev->bus_master-> ++ bitbang_pullup(dev->bus_master->data, 1); + msleep(dev->pullup_duration); ++ dev->bus_master-> ++ bitbang_pullup(dev->bus_master->data, 0); ++ } ++ } else { ++ msleep(dev->pullup_duration); ++ } ++ + dev->pullup_duration = 0; + } + } +--- a/include/linux/w1-gpio.h ++++ b/include/linux/w1-gpio.h +@@ -18,6 +18,7 @@ + struct w1_gpio_platform_data { + unsigned int pin; + unsigned int is_open_drain:1; ++ unsigned int parasitic_power:1; + void (*enable_external_pullup)(int enable); + unsigned int ext_pullup_enable_pin; + unsigned int pullup_duration; |