diff options
author | Florian Fainelli <florian@openwrt.org> | 2014-02-28 20:30:08 +0000 |
---|---|---|
committer | Florian Fainelli <florian@openwrt.org> | 2014-02-28 20:30:08 +0000 |
commit | 800930b924c19a56b3a6e94ad351cd0715fb410d (patch) | |
tree | 70158d97f68604d69da8da779507469cf930bf07 /target/linux/brcm2708/patches-3.10/002-Main-bcm2708-linux-port.patch | |
parent | 68c939ba0b0a0dda84e7a2ae370155be9a5593bc (diff) | |
download | upstream-800930b924c19a56b3a6e94ad351cd0715fb410d.tar.gz upstream-800930b924c19a56b3a6e94ad351cd0715fb410d.tar.bz2 upstream-800930b924c19a56b3a6e94ad351cd0715fb410d.zip |
brcm2708: update against latest rpi-3.10.y branch
Update our copies of the brcm2708 patches to the latest rpi-3.10-y
rebased against linux-3.10.y stable (3.10.32). This should hopefully
make it easier for us in the future to leverage the raspberry/rpi-*
branches.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39770 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm2708/patches-3.10/002-Main-bcm2708-linux-port.patch')
-rw-r--r-- | target/linux/brcm2708/patches-3.10/002-Main-bcm2708-linux-port.patch | 8353 |
1 files changed, 0 insertions, 8353 deletions
diff --git a/target/linux/brcm2708/patches-3.10/002-Main-bcm2708-linux-port.patch b/target/linux/brcm2708/patches-3.10/002-Main-bcm2708-linux-port.patch deleted file mode 100644 index baab5fbde5..0000000000 --- a/target/linux/brcm2708/patches-3.10/002-Main-bcm2708-linux-port.patch +++ /dev/null @@ -1,8353 +0,0 @@ ---- /dev/null -+++ b/arch/arm/configs/bcmrpi_cutdown_defconfig -@@ -0,0 +1,504 @@ -+CONFIG_EXPERIMENTAL=y -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SYSVIPC=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+# CONFIG_UID16 is not set -+# CONFIG_KALLSYMS is not set -+CONFIG_EMBEDDED=y -+# CONFIG_VM_EVENT_COUNTERS is not set -+# CONFIG_COMPAT_BRK is not set -+CONFIG_SLAB=y -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODVERSIONS=y -+CONFIG_MODULE_SRCVERSION_ALL=y -+# CONFIG_BLK_DEV_BSG is not set -+CONFIG_ARCH_BCM2708=y -+CONFIG_NO_HZ=y -+CONFIG_HIGH_RES_TIMERS=y -+CONFIG_AEABI=y -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait" -+CONFIG_CPU_IDLE=y -+CONFIG_VFP=y -+CONFIG_BINFMT_MISC=m -+CONFIG_NET=y -+CONFIG_PACKET=y -+CONFIG_UNIX=y -+CONFIG_XFRM_USER=y -+CONFIG_NET_KEY=m -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+CONFIG_IP_PNP_RARP=y -+CONFIG_SYN_COOKIES=y -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+# CONFIG_INET_LRO is not set -+# CONFIG_INET_DIAG is not set -+# CONFIG_IPV6 is not set -+CONFIG_NET_PKTGEN=m -+CONFIG_IRDA=m -+CONFIG_IRLAN=m -+CONFIG_IRCOMM=m -+CONFIG_IRDA_ULTRA=y -+CONFIG_IRDA_CACHE_LAST_LSAP=y -+CONFIG_IRDA_FAST_RR=y -+CONFIG_IRTTY_SIR=m -+CONFIG_KINGSUN_DONGLE=m -+CONFIG_KSDAZZLE_DONGLE=m -+CONFIG_KS959_DONGLE=m -+CONFIG_USB_IRDA=m -+CONFIG_SIGMATEL_FIR=m -+CONFIG_MCS_FIR=m -+CONFIG_BT=m -+CONFIG_BT_L2CAP=y -+CONFIG_BT_SCO=y -+CONFIG_BT_RFCOMM=m -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=m -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+CONFIG_BT_HIDP=m -+CONFIG_BT_HCIBTUSB=m -+CONFIG_BT_HCIBCM203X=m -+CONFIG_BT_HCIBPA10X=m -+CONFIG_BT_HCIBFUSB=m -+CONFIG_BT_HCIVHCI=m -+CONFIG_BT_MRVL=m -+CONFIG_BT_MRVL_SDIO=m -+CONFIG_BT_ATH3K=m -+CONFIG_CFG80211=m -+CONFIG_MAC80211=m -+CONFIG_MAC80211_RC_PID=y -+CONFIG_MAC80211_MESH=y -+CONFIG_WIMAX=m -+CONFIG_NET_9P=m -+CONFIG_NFC=m -+CONFIG_NFC_PN533=m -+CONFIG_DEVTMPFS=y -+CONFIG_BLK_DEV_LOOP=y -+CONFIG_BLK_DEV_CRYPTOLOOP=m -+CONFIG_BLK_DEV_NBD=m -+CONFIG_BLK_DEV_RAM=y -+CONFIG_CDROM_PKTCDVD=m -+CONFIG_MISC_DEVICES=y -+CONFIG_SCSI=y -+# CONFIG_SCSI_PROC_FS is not set -+CONFIG_BLK_DEV_SD=m -+CONFIG_BLK_DEV_SR=m -+CONFIG_SCSI_MULTI_LUN=y -+# CONFIG_SCSI_LOWLEVEL is not set -+CONFIG_NETDEVICES=y -+CONFIG_TUN=m -+CONFIG_PHYLIB=m -+CONFIG_MDIO_BITBANG=m -+CONFIG_NET_ETHERNET=y -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+CONFIG_LIBERTAS_THINFIRM=m -+CONFIG_LIBERTAS_THINFIRM_USB=m -+CONFIG_AT76C50X_USB=m -+CONFIG_USB_ZD1201=m -+CONFIG_USB_NET_RNDIS_WLAN=m -+CONFIG_RTL8187=m -+CONFIG_MAC80211_HWSIM=m -+CONFIG_ATH_COMMON=m -+CONFIG_ATH9K=m -+CONFIG_ATH9K_HTC=m -+CONFIG_CARL9170=m -+CONFIG_B43=m -+CONFIG_B43LEGACY=m -+CONFIG_HOSTAP=m -+CONFIG_IWM=m -+CONFIG_LIBERTAS=m -+CONFIG_LIBERTAS_USB=m -+CONFIG_LIBERTAS_SDIO=m -+CONFIG_P54_COMMON=m -+CONFIG_P54_USB=m -+CONFIG_RT2X00=m -+CONFIG_RT2500USB=m -+CONFIG_RT73USB=m -+CONFIG_RT2800USB=m -+CONFIG_RT2800USB_RT53XX=y -+CONFIG_RTL8192CU=m -+CONFIG_WL1251=m -+CONFIG_WL12XX_MENU=m -+CONFIG_ZD1211RW=m -+CONFIG_MWIFIEX=m -+CONFIG_MWIFIEX_SDIO=m -+CONFIG_WIMAX_I2400M_USB=m -+CONFIG_USB_CATC=m -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=m -+CONFIG_USB_RTL8150=m -+CONFIG_USB_USBNET=y -+CONFIG_USB_NET_AX8817X=m -+CONFIG_USB_NET_CDCETHER=m -+CONFIG_USB_NET_CDC_EEM=m -+CONFIG_USB_NET_DM9601=m -+CONFIG_USB_NET_SMSC75XX=m -+CONFIG_USB_NET_SMSC95XX=y -+CONFIG_USB_NET_GL620A=m -+CONFIG_USB_NET_NET1080=m -+CONFIG_USB_NET_PLUSB=m -+CONFIG_USB_NET_MCS7830=m -+CONFIG_USB_NET_CDC_SUBSET=m -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_KC2190=y -+# CONFIG_USB_NET_ZAURUS is not set -+CONFIG_USB_NET_CX82310_ETH=m -+CONFIG_USB_NET_KALMIA=m -+CONFIG_USB_NET_INT51X1=m -+CONFIG_USB_IPHETH=m -+CONFIG_USB_SIERRA_NET=m -+CONFIG_USB_VL600=m -+CONFIG_PPP=m -+CONFIG_PPP_ASYNC=m -+CONFIG_PPP_SYNC_TTY=m -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+CONFIG_SLIP=m -+CONFIG_SLIP_COMPRESSED=y -+CONFIG_NETCONSOLE=m -+CONFIG_INPUT_POLLDEV=m -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_JOYDEV=m -+CONFIG_INPUT_EVDEV=m -+# CONFIG_INPUT_KEYBOARD is not set -+# CONFIG_INPUT_MOUSE is not set -+CONFIG_INPUT_MISC=y -+CONFIG_INPUT_AD714X=m -+CONFIG_INPUT_ATI_REMOTE=m -+CONFIG_INPUT_ATI_REMOTE2=m -+CONFIG_INPUT_KEYSPAN_REMOTE=m -+CONFIG_INPUT_POWERMATE=m -+CONFIG_INPUT_YEALINK=m -+CONFIG_INPUT_CM109=m -+CONFIG_INPUT_UINPUT=m -+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -+CONFIG_INPUT_ADXL34X=m -+CONFIG_INPUT_CMA3000=m -+CONFIG_SERIO=m -+CONFIG_SERIO_RAW=m -+CONFIG_GAMEPORT=m -+CONFIG_GAMEPORT_NS558=m -+CONFIG_GAMEPORT_L4=m -+CONFIG_VT_HW_CONSOLE_BINDING=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_DEVKMEM is not set -+CONFIG_SERIAL_AMBA_PL011=y -+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -+# CONFIG_HW_RANDOM is not set -+CONFIG_RAW_DRIVER=y -+CONFIG_GPIO_SYSFS=y -+# CONFIG_HWMON is not set -+CONFIG_WATCHDOG=y -+CONFIG_BCM2708_WDT=m -+# CONFIG_MFD_SUPPORT is not set -+CONFIG_FB=y -+CONFIG_FB_BCM2708=y -+CONFIG_FRAMEBUFFER_CONSOLE=y -+CONFIG_LOGO=y -+# CONFIG_LOGO_LINUX_MONO is not set -+# CONFIG_LOGO_LINUX_VGA16 is not set -+CONFIG_SOUND=y -+CONFIG_SND=m -+CONFIG_SND_SEQUENCER=m -+CONFIG_SND_SEQ_DUMMY=m -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_SEQUENCER_OSS=y -+CONFIG_SND_HRTIMER=m -+CONFIG_SND_DUMMY=m -+CONFIG_SND_ALOOP=m -+CONFIG_SND_VIRMIDI=m -+CONFIG_SND_MTPAV=m -+CONFIG_SND_SERIAL_U16550=m -+CONFIG_SND_MPU401=m -+CONFIG_SND_BCM2835=m -+CONFIG_SND_USB_AUDIO=m -+CONFIG_SND_USB_UA101=m -+CONFIG_SND_USB_CAIAQ=m -+CONFIG_SND_USB_6FIRE=m -+CONFIG_SOUND_PRIME=m -+CONFIG_HID_PID=y -+CONFIG_USB_HIDDEV=y -+CONFIG_HID_A4TECH=m -+CONFIG_HID_ACRUX=m -+CONFIG_HID_APPLE=m -+CONFIG_HID_BELKIN=m -+CONFIG_HID_CHERRY=m -+CONFIG_HID_CHICONY=m -+CONFIG_HID_CYPRESS=m -+CONFIG_HID_DRAGONRISE=m -+CONFIG_HID_EMS_FF=m -+CONFIG_HID_ELECOM=m -+CONFIG_HID_EZKEY=m -+CONFIG_HID_HOLTEK=m -+CONFIG_HID_KEYTOUCH=m -+CONFIG_HID_KYE=m -+CONFIG_HID_UCLOGIC=m -+CONFIG_HID_WALTOP=m -+CONFIG_HID_GYRATION=m -+CONFIG_HID_TWINHAN=m -+CONFIG_HID_KENSINGTON=m -+CONFIG_HID_LCPOWER=m -+CONFIG_HID_LOGITECH=m -+CONFIG_HID_MAGICMOUSE=m -+CONFIG_HID_MICROSOFT=m -+CONFIG_HID_MONTEREY=m -+CONFIG_HID_MULTITOUCH=m -+CONFIG_HID_NTRIG=m -+CONFIG_HID_ORTEK=m -+CONFIG_HID_PANTHERLORD=m -+CONFIG_HID_PETALYNX=m -+CONFIG_HID_PICOLCD=m -+CONFIG_HID_QUANTA=m -+CONFIG_HID_ROCCAT=m -+CONFIG_HID_SAMSUNG=m -+CONFIG_HID_SONY=m -+CONFIG_HID_SPEEDLINK=m -+CONFIG_HID_SUNPLUS=m -+CONFIG_HID_GREENASIA=m -+CONFIG_HID_SMARTJOYPLUS=m -+CONFIG_HID_TOPSEED=m -+CONFIG_HID_THRUSTMASTER=m -+CONFIG_HID_WACOM=m -+CONFIG_HID_WIIMOTE=m -+CONFIG_HID_ZEROPLUS=m -+CONFIG_HID_ZYDACRON=m -+CONFIG_USB=y -+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -+CONFIG_USB_MON=m -+CONFIG_USB_DWCOTG=y -+CONFIG_USB_STORAGE=y -+CONFIG_USB_STORAGE_REALTEK=m -+CONFIG_USB_STORAGE_DATAFAB=m -+CONFIG_USB_STORAGE_FREECOM=m -+CONFIG_USB_STORAGE_ISD200=m -+CONFIG_USB_STORAGE_USBAT=m -+CONFIG_USB_STORAGE_SDDR09=m -+CONFIG_USB_STORAGE_SDDR55=m -+CONFIG_USB_STORAGE_JUMPSHOT=m -+CONFIG_USB_STORAGE_ALAUDA=m -+CONFIG_USB_STORAGE_ONETOUCH=m -+CONFIG_USB_STORAGE_KARMA=m -+CONFIG_USB_STORAGE_CYPRESS_ATACB=m -+CONFIG_USB_STORAGE_ENE_UB6250=m -+CONFIG_USB_UAS=m -+CONFIG_USB_LIBUSUAL=y -+CONFIG_USB_MDC800=m -+CONFIG_USB_MICROTEK=m -+CONFIG_USB_SERIAL=m -+CONFIG_USB_SERIAL_GENERIC=y -+CONFIG_USB_SERIAL_AIRCABLE=m -+CONFIG_USB_SERIAL_ARK3116=m -+CONFIG_USB_SERIAL_BELKIN=m -+CONFIG_USB_SERIAL_CH341=m -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP210X=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_FUNSOFT=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+CONFIG_USB_SERIAL_IUU=m -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+CONFIG_USB_SERIAL_KEYSPAN=m -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_MOS7720=m -+CONFIG_USB_SERIAL_MOS7840=m -+CONFIG_USB_SERIAL_MOTOROLA=m -+CONFIG_USB_SERIAL_NAVMAN=m -+CONFIG_USB_SERIAL_PL2303=m -+CONFIG_USB_SERIAL_OTI6858=m -+CONFIG_USB_SERIAL_QCAUX=m -+CONFIG_USB_SERIAL_QUALCOMM=m -+CONFIG_USB_SERIAL_SPCP8X5=m -+CONFIG_USB_SERIAL_HP4X=m -+CONFIG_USB_SERIAL_SAFE=m -+CONFIG_USB_SERIAL_SIEMENS_MPI=m -+CONFIG_USB_SERIAL_SIERRAWIRELESS=m -+CONFIG_USB_SERIAL_SYMBOL=m -+CONFIG_USB_SERIAL_TI=m -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OPTION=m -+CONFIG_USB_SERIAL_OMNINET=m -+CONFIG_USB_SERIAL_OPTICON=m -+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m -+CONFIG_USB_SERIAL_ZIO=m -+CONFIG_USB_SERIAL_SSU100=m -+CONFIG_USB_SERIAL_DEBUG=m -+CONFIG_USB_EMI62=m -+CONFIG_USB_EMI26=m -+CONFIG_USB_ADUTUX=m -+CONFIG_USB_SEVSEG=m -+CONFIG_USB_RIO500=m -+CONFIG_USB_LEGOTOWER=m -+CONFIG_USB_LCD=m -+CONFIG_USB_LED=m -+CONFIG_USB_CYPRESS_CY7C63=m -+CONFIG_USB_CYTHERM=m -+CONFIG_USB_IDMOUSE=m -+CONFIG_USB_FTDI_ELAN=m -+CONFIG_USB_APPLEDISPLAY=m -+CONFIG_USB_LD=m -+CONFIG_USB_TRANCEVIBRATOR=m -+CONFIG_USB_IOWARRIOR=m -+CONFIG_USB_TEST=m -+CONFIG_USB_ISIGHTFW=m -+CONFIG_USB_YUREX=m -+CONFIG_MMC=y -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_PLTFM=y -+CONFIG_MMC_SDHCI_BCM2708=y -+CONFIG_MMC_SDHCI_BCM2708_DMA=y -+CONFIG_LEDS_GPIO=y -+CONFIG_LEDS_TRIGGER_TIMER=m -+CONFIG_LEDS_TRIGGER_HEARTBEAT=m -+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m -+CONFIG_UIO=m -+CONFIG_UIO_PDRV=m -+CONFIG_UIO_PDRV_GENIRQ=m -+# CONFIG_IOMMU_SUPPORT is not set -+CONFIG_EXT4_FS=y -+CONFIG_EXT4_FS_POSIX_ACL=y -+CONFIG_EXT4_FS_SECURITY=y -+CONFIG_REISERFS_FS=m -+CONFIG_REISERFS_FS_XATTR=y -+CONFIG_REISERFS_FS_POSIX_ACL=y -+CONFIG_REISERFS_FS_SECURITY=y -+CONFIG_JFS_FS=m -+CONFIG_JFS_POSIX_ACL=y -+CONFIG_JFS_SECURITY=y -+CONFIG_XFS_FS=m -+CONFIG_XFS_QUOTA=y -+CONFIG_XFS_POSIX_ACL=y -+CONFIG_XFS_RT=y -+CONFIG_GFS2_FS=m -+CONFIG_OCFS2_FS=m -+CONFIG_BTRFS_FS=m -+CONFIG_BTRFS_FS_POSIX_ACL=y -+CONFIG_NILFS2_FS=m -+CONFIG_AUTOFS4_FS=y -+CONFIG_FUSE_FS=m -+CONFIG_CUSE=m -+CONFIG_FSCACHE=y -+CONFIG_CACHEFILES=y -+CONFIG_ISO9660_FS=m -+CONFIG_JOLIET=y -+CONFIG_ZISOFS=y -+CONFIG_UDF_FS=m -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -+CONFIG_NTFS_FS=m -+CONFIG_TMPFS=y -+CONFIG_TMPFS_POSIX_ACL=y -+CONFIG_CONFIGFS_FS=y -+CONFIG_SQUASHFS=m -+CONFIG_SQUASHFS_XATTR=y -+CONFIG_SQUASHFS_LZO=y -+CONFIG_SQUASHFS_XZ=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+CONFIG_NFS_V3_ACL=y -+CONFIG_NFS_V4=y -+CONFIG_ROOT_NFS=y -+CONFIG_NFS_FSCACHE=y -+CONFIG_CIFS=m -+CONFIG_CIFS_WEAK_PW_HASH=y -+CONFIG_CIFS_XATTR=y -+CONFIG_CIFS_POSIX=y -+CONFIG_9P_FS=m -+CONFIG_PARTITION_ADVANCED=y -+CONFIG_MAC_PARTITION=y -+CONFIG_EFI_PARTITION=y -+CONFIG_NLS_DEFAULT="utf8" -+CONFIG_NLS_CODEPAGE_437=y -+CONFIG_NLS_CODEPAGE_737=m -+CONFIG_NLS_CODEPAGE_775=m -+CONFIG_NLS_CODEPAGE_850=m -+CONFIG_NLS_CODEPAGE_852=m -+CONFIG_NLS_CODEPAGE_855=m -+CONFIG_NLS_CODEPAGE_857=m -+CONFIG_NLS_CODEPAGE_860=m -+CONFIG_NLS_CODEPAGE_861=m -+CONFIG_NLS_CODEPAGE_862=m -+CONFIG_NLS_CODEPAGE_863=m -+CONFIG_NLS_CODEPAGE_864=m -+CONFIG_NLS_CODEPAGE_865=m -+CONFIG_NLS_CODEPAGE_866=m -+CONFIG_NLS_CODEPAGE_869=m -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+CONFIG_NLS_CODEPAGE_932=m -+CONFIG_NLS_CODEPAGE_949=m -+CONFIG_NLS_CODEPAGE_874=m -+CONFIG_NLS_ISO8859_8=m -+CONFIG_NLS_CODEPAGE_1250=m -+CONFIG_NLS_CODEPAGE_1251=m -+CONFIG_NLS_ASCII=y -+CONFIG_NLS_ISO8859_1=m -+CONFIG_NLS_ISO8859_2=m -+CONFIG_NLS_ISO8859_3=m -+CONFIG_NLS_ISO8859_4=m -+CONFIG_NLS_ISO8859_5=m -+CONFIG_NLS_ISO8859_6=m -+CONFIG_NLS_ISO8859_7=m -+CONFIG_NLS_ISO8859_9=m -+CONFIG_NLS_ISO8859_13=m -+CONFIG_NLS_ISO8859_14=m -+CONFIG_NLS_ISO8859_15=m -+CONFIG_NLS_KOI8_R=m -+CONFIG_NLS_KOI8_U=m -+CONFIG_NLS_UTF8=m -+# CONFIG_SCHED_DEBUG is not set -+# CONFIG_DEBUG_BUGVERBOSE is not set -+# CONFIG_FTRACE is not set -+# CONFIG_ARM_UNWIND is not set -+CONFIG_CRYPTO_AUTHENC=m -+CONFIG_CRYPTO_SEQIV=m -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_HMAC=y -+CONFIG_CRYPTO_XCBC=m -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=y -+CONFIG_CRYPTO_SHA256=m -+CONFIG_CRYPTO_SHA512=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_WP512=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_DES=y -+CONFIG_CRYPTO_DEFLATE=m -+# CONFIG_CRYPTO_ANSI_CPRNG is not set -+# CONFIG_CRYPTO_HW is not set -+CONFIG_CRC_ITU_T=y -+CONFIG_LIBCRC32C=y -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_COMPAT=y -+CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_HELPER_AUTO=y -+CONFIG_I2C_BCM2708=m -+CONFIG_SPI=y -+CONFIG_SPI_MASTER=y -+CONFIG_SPI_BCM2708=m -+ ---- /dev/null -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -0,0 +1,743 @@ -+# CONFIG_ARM_PATCH_PHYS_VIRT is not set -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SYSVIPC=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_FHANDLE=y -+CONFIG_AUDIT=y -+CONFIG_NO_HZ=y -+CONFIG_HIGH_RES_TIMERS=y -+CONFIG_BSD_PROCESS_ACCT=y -+CONFIG_BSD_PROCESS_ACCT_V3=y -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_CGROUP_FREEZER=y -+CONFIG_CGROUP_DEVICE=y -+CONFIG_CGROUP_CPUACCT=y -+CONFIG_RESOURCE_COUNTERS=y -+CONFIG_BLK_CGROUP=y -+CONFIG_NAMESPACES=y -+CONFIG_SCHED_AUTOGROUP=y -+CONFIG_EMBEDDED=y -+# CONFIG_COMPAT_BRK is not set -+CONFIG_SLAB=y -+CONFIG_PROFILING=y -+CONFIG_OPROFILE=m -+CONFIG_KPROBES=y -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODVERSIONS=y -+CONFIG_MODULE_SRCVERSION_ALL=y -+# CONFIG_BLK_DEV_BSG is not set -+CONFIG_BLK_DEV_THROTTLING=y -+CONFIG_PARTITION_ADVANCED=y -+CONFIG_MAC_PARTITION=y -+CONFIG_CFQ_GROUP_IOSCHED=y -+CONFIG_ARCH_BCM2708=y -+CONFIG_AEABI=y -+CONFIG_SECCOMP=y -+CONFIG_CC_STACKPROTECTOR=y -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait" -+CONFIG_KEXEC=y -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_STAT=m -+CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -+CONFIG_CPU_IDLE=y -+CONFIG_VFP=y -+CONFIG_BINFMT_MISC=m -+CONFIG_NET=y -+CONFIG_PACKET=y -+CONFIG_UNIX=y -+CONFIG_XFRM_USER=y -+CONFIG_NET_KEY=m -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+CONFIG_IP_PNP_RARP=y -+CONFIG_SYN_COOKIES=y -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m -+CONFIG_INET_IPCOMP=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m -+CONFIG_INET_LRO=m -+CONFIG_INET_DIAG=m -+CONFIG_IPV6_PRIVACY=y -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+CONFIG_IPV6_MULTIPLE_TABLES=y -+CONFIG_NETFILTER=y -+CONFIG_NF_CONNTRACK=m -+CONFIG_NF_CONNTRACK_ZONES=y -+CONFIG_NF_CONNTRACK_EVENTS=y -+CONFIG_NF_CONNTRACK_TIMESTAMP=y -+CONFIG_NF_CT_PROTO_DCCP=m -+CONFIG_NF_CT_PROTO_SCTP=m -+CONFIG_NF_CT_PROTO_UDPLITE=m -+CONFIG_NF_CONNTRACK_AMANDA=m -+CONFIG_NF_CONNTRACK_FTP=m -+CONFIG_NF_CONNTRACK_H323=m -+CONFIG_NF_CONNTRACK_IRC=m -+CONFIG_NF_CONNTRACK_NETBIOS_NS=m -+CONFIG_NF_CONNTRACK_SNMP=m -+CONFIG_NF_CONNTRACK_PPTP=m -+CONFIG_NF_CONNTRACK_SANE=m -+CONFIG_NF_CONNTRACK_SIP=m -+CONFIG_NF_CONNTRACK_TFTP=m -+CONFIG_NF_CT_NETLINK=m -+CONFIG_NETFILTER_TPROXY=m -+CONFIG_NETFILTER_XT_SET=m -+CONFIG_NETFILTER_XT_TARGET_AUDIT=m -+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -+CONFIG_NETFILTER_XT_TARGET_DSCP=m -+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -+CONFIG_NETFILTER_XT_TARGET_MARK=m -+CONFIG_NETFILTER_XT_TARGET_NFLOG=m -+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -+CONFIG_NETFILTER_XT_TARGET_TEE=m -+CONFIG_NETFILTER_XT_TARGET_TPROXY=m -+CONFIG_NETFILTER_XT_TARGET_TRACE=m -+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m -+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -+CONFIG_NETFILTER_XT_MATCH_COMMENT=m -+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -+CONFIG_NETFILTER_XT_MATCH_CPU=m -+CONFIG_NETFILTER_XT_MATCH_DCCP=m -+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -+CONFIG_NETFILTER_XT_MATCH_DSCP=m -+CONFIG_NETFILTER_XT_MATCH_ESP=m -+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -+CONFIG_NETFILTER_XT_MATCH_HELPER=m -+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -+CONFIG_NETFILTER_XT_MATCH_LENGTH=m -+CONFIG_NETFILTER_XT_MATCH_LIMIT=m -+CONFIG_NETFILTER_XT_MATCH_MAC=m -+CONFIG_NETFILTER_XT_MATCH_MARK=m -+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -+CONFIG_NETFILTER_XT_MATCH_OSF=m -+CONFIG_NETFILTER_XT_MATCH_OWNER=m -+CONFIG_NETFILTER_XT_MATCH_POLICY=m -+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -+CONFIG_NETFILTER_XT_MATCH_QUOTA=m -+CONFIG_NETFILTER_XT_MATCH_RATEEST=m -+CONFIG_NETFILTER_XT_MATCH_REALM=m -+CONFIG_NETFILTER_XT_MATCH_RECENT=m -+CONFIG_NETFILTER_XT_MATCH_SCTP=m -+CONFIG_NETFILTER_XT_MATCH_SOCKET=m -+CONFIG_NETFILTER_XT_MATCH_STATE=m -+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -+CONFIG_NETFILTER_XT_MATCH_STRING=m -+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -+CONFIG_NETFILTER_XT_MATCH_TIME=m -+CONFIG_NETFILTER_XT_MATCH_U32=m -+CONFIG_IP_SET=m -+CONFIG_IP_SET_BITMAP_IP=m -+CONFIG_IP_SET_BITMAP_IPMAC=m -+CONFIG_IP_SET_BITMAP_PORT=m -+CONFIG_IP_SET_HASH_IP=m -+CONFIG_IP_SET_HASH_IPPORT=m -+CONFIG_IP_SET_HASH_IPPORTIP=m -+CONFIG_IP_SET_HASH_IPPORTNET=m -+CONFIG_IP_SET_HASH_NET=m -+CONFIG_IP_SET_HASH_NETPORT=m -+CONFIG_IP_SET_HASH_NETIFACE=m -+CONFIG_IP_SET_LIST_SET=m -+CONFIG_NF_CONNTRACK_IPV4=m -+CONFIG_IP_NF_IPTABLES=m -+CONFIG_IP_NF_MATCH_AH=m -+CONFIG_IP_NF_MATCH_ECN=m -+CONFIG_IP_NF_MATCH_TTL=m -+CONFIG_IP_NF_FILTER=m -+CONFIG_IP_NF_TARGET_REJECT=m -+CONFIG_IP_NF_TARGET_ULOG=m -+CONFIG_IP_NF_MANGLE=m -+CONFIG_IP_NF_TARGET_ECN=m -+CONFIG_IP_NF_TARGET_TTL=m -+CONFIG_IP_NF_RAW=m -+CONFIG_IP_NF_ARPTABLES=m -+CONFIG_IP_NF_ARPFILTER=m -+CONFIG_IP_NF_ARP_MANGLE=m -+CONFIG_NF_CONNTRACK_IPV6=m -+CONFIG_IP6_NF_IPTABLES=m -+CONFIG_IP6_NF_MATCH_AH=m -+CONFIG_IP6_NF_MATCH_EUI64=m -+CONFIG_IP6_NF_MATCH_FRAG=m -+CONFIG_IP6_NF_MATCH_OPTS=m -+CONFIG_IP6_NF_MATCH_HL=m -+CONFIG_IP6_NF_MATCH_IPV6HEADER=m -+CONFIG_IP6_NF_MATCH_MH=m -+CONFIG_IP6_NF_MATCH_RT=m -+CONFIG_IP6_NF_TARGET_HL=m -+CONFIG_IP6_NF_FILTER=m -+CONFIG_IP6_NF_TARGET_REJECT=m -+CONFIG_IP6_NF_MANGLE=m -+CONFIG_IP6_NF_RAW=m -+CONFIG_BRIDGE_NF_EBTABLES=m -+CONFIG_BRIDGE_EBT_BROUTE=m -+CONFIG_BRIDGE_EBT_T_FILTER=m -+CONFIG_BRIDGE_EBT_T_NAT=m -+CONFIG_BRIDGE_EBT_802_3=m -+CONFIG_BRIDGE_EBT_AMONG=m -+CONFIG_BRIDGE_EBT_ARP=m -+CONFIG_BRIDGE_EBT_IP=m -+CONFIG_BRIDGE_EBT_IP6=m -+CONFIG_BRIDGE_EBT_LIMIT=m -+CONFIG_BRIDGE_EBT_MARK=m -+CONFIG_BRIDGE_EBT_PKTTYPE=m -+CONFIG_BRIDGE_EBT_STP=m -+CONFIG_BRIDGE_EBT_VLAN=m -+CONFIG_BRIDGE_EBT_ARPREPLY=m -+CONFIG_BRIDGE_EBT_DNAT=m -+CONFIG_BRIDGE_EBT_MARK_T=m -+CONFIG_BRIDGE_EBT_REDIRECT=m -+CONFIG_BRIDGE_EBT_SNAT=m -+CONFIG_BRIDGE_EBT_LOG=m -+CONFIG_BRIDGE_EBT_ULOG=m -+CONFIG_BRIDGE_EBT_NFLOG=m -+CONFIG_L2TP=m -+CONFIG_BRIDGE=m -+CONFIG_VLAN_8021Q=m -+CONFIG_VLAN_8021Q_GVRP=y -+CONFIG_NET_SCHED=y -+CONFIG_NET_SCH_CBQ=m -+CONFIG_NET_SCH_HTB=m -+CONFIG_NET_SCH_HFSC=m -+CONFIG_NET_SCH_PRIO=m -+CONFIG_NET_SCH_MULTIQ=m -+CONFIG_NET_SCH_RED=m -+CONFIG_NET_SCH_SFB=m -+CONFIG_NET_SCH_SFQ=m -+CONFIG_NET_SCH_TEQL=m -+CONFIG_NET_SCH_TBF=m -+CONFIG_NET_SCH_GRED=m -+CONFIG_NET_SCH_DSMARK=m -+CONFIG_NET_SCH_NETEM=m -+CONFIG_NET_SCH_DRR=m -+CONFIG_NET_SCH_MQPRIO=m -+CONFIG_NET_SCH_CHOKE=m -+CONFIG_NET_SCH_QFQ=m -+CONFIG_NET_CLS_BASIC=m -+CONFIG_NET_CLS_TCINDEX=m -+CONFIG_NET_CLS_ROUTE4=m -+CONFIG_NET_CLS_FW=m -+CONFIG_NET_CLS_U32=m -+CONFIG_CLS_U32_MARK=y -+CONFIG_NET_CLS_RSVP=m -+CONFIG_NET_CLS_RSVP6=m -+CONFIG_NET_CLS_FLOW=m -+CONFIG_NET_CLS_CGROUP=m -+CONFIG_NET_EMATCH=y -+CONFIG_NET_EMATCH_CMP=m -+CONFIG_NET_EMATCH_NBYTE=m -+CONFIG_NET_EMATCH_U32=m -+CONFIG_NET_EMATCH_META=m -+CONFIG_NET_EMATCH_TEXT=m -+CONFIG_NET_CLS_ACT=y -+CONFIG_NET_ACT_POLICE=m -+CONFIG_NET_ACT_GACT=m -+CONFIG_GACT_PROB=y -+CONFIG_NET_ACT_MIRRED=m -+CONFIG_NET_ACT_IPT=m -+CONFIG_NET_ACT_NAT=m -+CONFIG_NET_ACT_PEDIT=m -+CONFIG_NET_ACT_SIMP=m -+CONFIG_NET_ACT_SKBEDIT=m -+CONFIG_NET_ACT_CSUM=m -+CONFIG_NET_PKTGEN=m -+CONFIG_IRDA=m -+CONFIG_IRLAN=m -+CONFIG_IRCOMM=m -+CONFIG_IRDA_ULTRA=y -+CONFIG_IRDA_CACHE_LAST_LSAP=y -+CONFIG_IRDA_FAST_RR=y -+CONFIG_IRTTY_SIR=m -+CONFIG_KINGSUN_DONGLE=m -+CONFIG_KSDAZZLE_DONGLE=m -+CONFIG_KS959_DONGLE=m -+CONFIG_USB_IRDA=m -+CONFIG_SIGMATEL_FIR=m -+CONFIG_MCS_FIR=m -+CONFIG_BT=m -+CONFIG_BT_RFCOMM=m -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=m -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+CONFIG_BT_HIDP=m -+CONFIG_BT_HCIBTUSB=m -+CONFIG_BT_HCIBCM203X=m -+CONFIG_BT_HCIBPA10X=m -+CONFIG_BT_HCIBFUSB=m -+CONFIG_BT_HCIVHCI=m -+CONFIG_BT_MRVL=m -+CONFIG_BT_MRVL_SDIO=m -+CONFIG_BT_ATH3K=m -+CONFIG_CFG80211=m -+CONFIG_MAC80211=m -+CONFIG_MAC80211_RC_PID=y -+CONFIG_MAC80211_MESH=y -+CONFIG_WIMAX=m -+CONFIG_NET_9P=m -+CONFIG_NFC=m -+CONFIG_NFC_PN533=m -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_DEVTMPFS=y -+CONFIG_DEVTMPFS_MOUNT=y -+CONFIG_BLK_DEV_LOOP=y -+CONFIG_BLK_DEV_CRYPTOLOOP=m -+CONFIG_BLK_DEV_DRBD=m -+CONFIG_BLK_DEV_NBD=m -+CONFIG_BLK_DEV_RAM=y -+CONFIG_CDROM_PKTCDVD=m -+CONFIG_SCSI=y -+# CONFIG_SCSI_PROC_FS is not set -+CONFIG_BLK_DEV_SD=m -+CONFIG_BLK_DEV_SR=m -+CONFIG_SCSI_MULTI_LUN=y -+# CONFIG_SCSI_LOWLEVEL is not set -+CONFIG_MD=y -+CONFIG_NETDEVICES=y -+CONFIG_NETCONSOLE=m -+CONFIG_TUN=m -+CONFIG_MDIO_BITBANG=m -+CONFIG_PPP=m -+CONFIG_PPP_BSDCOMP=m -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_ASYNC=m -+CONFIG_PPP_SYNC_TTY=m -+CONFIG_SLIP=m -+CONFIG_SLIP_COMPRESSED=y -+CONFIG_USB_CATC=m -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=m -+CONFIG_USB_RTL8150=m -+CONFIG_USB_USBNET=y -+CONFIG_USB_NET_AX8817X=m -+CONFIG_USB_NET_CDCETHER=m -+CONFIG_USB_NET_CDC_EEM=m -+CONFIG_USB_NET_DM9601=m -+CONFIG_USB_NET_SMSC75XX=m -+CONFIG_USB_NET_SMSC95XX=y -+CONFIG_USB_NET_GL620A=m -+CONFIG_USB_NET_NET1080=m -+CONFIG_USB_NET_PLUSB=m -+CONFIG_USB_NET_MCS7830=m -+CONFIG_USB_NET_CDC_SUBSET=m -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_KC2190=y -+# CONFIG_USB_NET_ZAURUS is not set -+CONFIG_USB_NET_CX82310_ETH=m -+CONFIG_USB_NET_KALMIA=m -+CONFIG_USB_NET_INT51X1=m -+CONFIG_USB_IPHETH=m -+CONFIG_USB_SIERRA_NET=m -+CONFIG_USB_VL600=m -+CONFIG_LIBERTAS_THINFIRM=m -+CONFIG_LIBERTAS_THINFIRM_USB=m -+CONFIG_AT76C50X_USB=m -+CONFIG_USB_ZD1201=m -+CONFIG_USB_NET_RNDIS_WLAN=m -+CONFIG_RTL8187=m -+CONFIG_MAC80211_HWSIM=m -+CONFIG_B43=m -+CONFIG_B43LEGACY=m -+CONFIG_HOSTAP=m -+CONFIG_LIBERTAS=m -+CONFIG_LIBERTAS_USB=m -+CONFIG_LIBERTAS_SDIO=m -+CONFIG_P54_COMMON=m -+CONFIG_P54_USB=m -+CONFIG_RT2X00=m -+CONFIG_RT2500USB=m -+CONFIG_RT73USB=m -+CONFIG_RT2800USB=m -+CONFIG_RT2800USB_RT53XX=y -+CONFIG_RT2800USB_UNKNOWN=y -+CONFIG_ZD1211RW=m -+CONFIG_MWIFIEX=m -+CONFIG_MWIFIEX_SDIO=m -+CONFIG_WIMAX_I2400M_USB=m -+CONFIG_INPUT_POLLDEV=m -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_JOYDEV=m -+CONFIG_INPUT_EVDEV=m -+# CONFIG_INPUT_KEYBOARD is not set -+# CONFIG_INPUT_MOUSE is not set -+CONFIG_INPUT_MISC=y -+CONFIG_INPUT_AD714X=m -+CONFIG_INPUT_ATI_REMOTE2=m -+CONFIG_INPUT_KEYSPAN_REMOTE=m -+CONFIG_INPUT_POWERMATE=m -+CONFIG_INPUT_YEALINK=m -+CONFIG_INPUT_CM109=m -+CONFIG_INPUT_UINPUT=m -+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -+CONFIG_INPUT_ADXL34X=m -+CONFIG_INPUT_CMA3000=m -+CONFIG_SERIO=m -+CONFIG_SERIO_RAW=m -+CONFIG_GAMEPORT=m -+CONFIG_GAMEPORT_NS558=m -+CONFIG_GAMEPORT_L4=m -+CONFIG_VT_HW_CONSOLE_BINDING=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_DEVKMEM is not set -+CONFIG_SERIAL_AMBA_PL011=y -+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -+# CONFIG_HW_RANDOM is not set -+CONFIG_RAW_DRIVER=y -+CONFIG_I2C=y -+CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_BCM2708=m -+CONFIG_SPI=y -+CONFIG_SPI_BCM2708=m -+CONFIG_SPI_SPIDEV=m -+CONFIG_GPIO_SYSFS=y -+# CONFIG_HWMON is not set -+CONFIG_THERMAL=y -+CONFIG_THERMAL_BCM2835=y -+CONFIG_WATCHDOG=y -+CONFIG_BCM2708_WDT=m -+CONFIG_MEDIA_SUPPORT=m -+CONFIG_FB=y -+CONFIG_FB_BCM2708=y -+CONFIG_FRAMEBUFFER_CONSOLE=y -+CONFIG_LOGO=y -+# CONFIG_LOGO_LINUX_MONO is not set -+# CONFIG_LOGO_LINUX_VGA16 is not set -+CONFIG_SOUND=y -+CONFIG_SND=m -+CONFIG_SND_SEQUENCER=m -+CONFIG_SND_SEQ_DUMMY=m -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_SEQUENCER_OSS=y -+CONFIG_SND_HRTIMER=m -+CONFIG_SND_DUMMY=m -+CONFIG_SND_ALOOP=m -+CONFIG_SND_VIRMIDI=m -+CONFIG_SND_MTPAV=m -+CONFIG_SND_SERIAL_U16550=m -+CONFIG_SND_MPU401=m -+CONFIG_SND_BCM2835=m -+CONFIG_SND_USB_AUDIO=m -+CONFIG_SND_USB_UA101=m -+CONFIG_SND_USB_CAIAQ=m -+CONFIG_SND_USB_6FIRE=m -+CONFIG_SOUND_PRIME=m -+CONFIG_HID_A4TECH=m -+CONFIG_HID_ACRUX=m -+CONFIG_HID_APPLE=m -+CONFIG_HID_BELKIN=m -+CONFIG_HID_CHERRY=m -+CONFIG_HID_CHICONY=m -+CONFIG_HID_CYPRESS=m -+CONFIG_HID_DRAGONRISE=m -+CONFIG_HID_EMS_FF=m -+CONFIG_HID_ELECOM=m -+CONFIG_HID_EZKEY=m -+CONFIG_HID_HOLTEK=m -+CONFIG_HID_KEYTOUCH=m -+CONFIG_HID_KYE=m -+CONFIG_HID_UCLOGIC=m -+CONFIG_HID_WALTOP=m -+CONFIG_HID_GYRATION=m -+CONFIG_HID_TWINHAN=m -+CONFIG_HID_KENSINGTON=m -+CONFIG_HID_LCPOWER=m -+CONFIG_HID_LOGITECH=m -+CONFIG_HID_MAGICMOUSE=m -+CONFIG_HID_MICROSOFT=m -+CONFIG_HID_MONTEREY=m -+CONFIG_HID_MULTITOUCH=m -+CONFIG_HID_NTRIG=m -+CONFIG_HID_ORTEK=m -+CONFIG_HID_PANTHERLORD=m -+CONFIG_HID_PETALYNX=m -+CONFIG_HID_PICOLCD=m -+CONFIG_HID_ROCCAT=m -+CONFIG_HID_SAMSUNG=m -+CONFIG_HID_SONY=m -+CONFIG_HID_SPEEDLINK=m -+CONFIG_HID_SUNPLUS=m -+CONFIG_HID_GREENASIA=m -+CONFIG_HID_SMARTJOYPLUS=m -+CONFIG_HID_TOPSEED=m -+CONFIG_HID_THRUSTMASTER=m -+CONFIG_HID_ZEROPLUS=m -+CONFIG_HID_ZYDACRON=m -+CONFIG_HID_PID=y -+CONFIG_USB_HIDDEV=y -+CONFIG_USB=y -+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -+CONFIG_USB_MON=m -+CONFIG_USB_DWCOTG=y -+CONFIG_USB_STORAGE=y -+CONFIG_USB_STORAGE_REALTEK=m -+CONFIG_USB_STORAGE_DATAFAB=m -+CONFIG_USB_STORAGE_FREECOM=m -+CONFIG_USB_STORAGE_ISD200=m -+CONFIG_USB_STORAGE_USBAT=m -+CONFIG_USB_STORAGE_SDDR09=m -+CONFIG_USB_STORAGE_SDDR55=m -+CONFIG_USB_STORAGE_JUMPSHOT=m -+CONFIG_USB_STORAGE_ALAUDA=m -+CONFIG_USB_STORAGE_ONETOUCH=m -+CONFIG_USB_STORAGE_KARMA=m -+CONFIG_USB_STORAGE_CYPRESS_ATACB=m -+CONFIG_USB_STORAGE_ENE_UB6250=m -+CONFIG_USB_MDC800=m -+CONFIG_USB_MICROTEK=m -+CONFIG_USB_SERIAL=m -+CONFIG_USB_SERIAL_GENERIC=y -+CONFIG_USB_SERIAL_AIRCABLE=m -+CONFIG_USB_SERIAL_ARK3116=m -+CONFIG_USB_SERIAL_BELKIN=m -+CONFIG_USB_SERIAL_CH341=m -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP210X=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_FUNSOFT=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+CONFIG_USB_SERIAL_IUU=m -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+CONFIG_USB_SERIAL_KEYSPAN=m -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_MOS7720=m -+CONFIG_USB_SERIAL_MOS7840=m -+CONFIG_USB_SERIAL_MOTOROLA=m -+CONFIG_USB_SERIAL_NAVMAN=m -+CONFIG_USB_SERIAL_PL2303=m -+CONFIG_USB_SERIAL_OTI6858=m -+CONFIG_USB_SERIAL_QCAUX=m -+CONFIG_USB_SERIAL_QUALCOMM=m -+CONFIG_USB_SERIAL_SPCP8X5=m -+CONFIG_USB_SERIAL_HP4X=m -+CONFIG_USB_SERIAL_SAFE=m -+CONFIG_USB_SERIAL_SIEMENS_MPI=m -+CONFIG_USB_SERIAL_SIERRAWIRELESS=m -+CONFIG_USB_SERIAL_SYMBOL=m -+CONFIG_USB_SERIAL_TI=m -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OPTION=m -+CONFIG_USB_SERIAL_OMNINET=m -+CONFIG_USB_SERIAL_OPTICON=m -+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m -+CONFIG_USB_SERIAL_ZIO=m -+CONFIG_USB_SERIAL_SSU100=m -+CONFIG_USB_SERIAL_DEBUG=m -+CONFIG_USB_EMI62=m -+CONFIG_USB_EMI26=m -+CONFIG_USB_ADUTUX=m -+CONFIG_USB_SEVSEG=m -+CONFIG_USB_RIO500=m -+CONFIG_USB_LEGOTOWER=m -+CONFIG_USB_LCD=m -+CONFIG_USB_LED=m -+CONFIG_USB_CYPRESS_CY7C63=m -+CONFIG_USB_CYTHERM=m -+CONFIG_USB_IDMOUSE=m -+CONFIG_USB_FTDI_ELAN=m -+CONFIG_USB_APPLEDISPLAY=m -+CONFIG_USB_LD=m -+CONFIG_USB_TRANCEVIBRATOR=m -+CONFIG_USB_IOWARRIOR=m -+CONFIG_USB_TEST=m -+CONFIG_USB_ISIGHTFW=m -+CONFIG_USB_YUREX=m -+CONFIG_MMC=y -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_PLTFM=y -+CONFIG_MMC_SDHCI_BCM2708=y -+CONFIG_MMC_SDHCI_BCM2708_DMA=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_DRV_DS1307=m -+CONFIG_RTC_DRV_DS1374=m -+CONFIG_RTC_DRV_DS1672=m -+CONFIG_RTC_DRV_DS3232=m -+CONFIG_RTC_DRV_MAX6900=m -+CONFIG_RTC_DRV_RS5C372=m -+CONFIG_RTC_DRV_ISL1208=m -+CONFIG_RTC_DRV_ISL12022=m -+CONFIG_RTC_DRV_X1205=m -+CONFIG_RTC_DRV_PCF8563=m -+CONFIG_RTC_DRV_PCF8583=m -+CONFIG_RTC_DRV_M41T80=m -+CONFIG_RTC_DRV_BQ32K=m -+CONFIG_RTC_DRV_S35390A=m -+CONFIG_RTC_DRV_FM3130=m -+CONFIG_RTC_DRV_RX8581=m -+CONFIG_RTC_DRV_RX8025=m -+CONFIG_RTC_DRV_EM3027=m -+CONFIG_RTC_DRV_RV3029C2=m -+CONFIG_RTC_DRV_M41T93=m -+CONFIG_RTC_DRV_M41T94=m -+CONFIG_RTC_DRV_DS1305=m -+CONFIG_RTC_DRV_DS1390=m -+CONFIG_RTC_DRV_MAX6902=m -+CONFIG_RTC_DRV_R9701=m -+CONFIG_RTC_DRV_RS5C348=m -+CONFIG_RTC_DRV_DS3234=m -+CONFIG_RTC_DRV_PCF2123=m -+CONFIG_UIO=m -+CONFIG_UIO_PDRV=m -+CONFIG_UIO_PDRV_GENIRQ=m -+# CONFIG_IOMMU_SUPPORT is not set -+CONFIG_EXT4_FS=y -+CONFIG_EXT4_FS_POSIX_ACL=y -+CONFIG_EXT4_FS_SECURITY=y -+CONFIG_REISERFS_FS=m -+CONFIG_REISERFS_FS_XATTR=y -+CONFIG_REISERFS_FS_POSIX_ACL=y -+CONFIG_REISERFS_FS_SECURITY=y -+CONFIG_JFS_FS=m -+CONFIG_JFS_POSIX_ACL=y -+CONFIG_JFS_SECURITY=y -+CONFIG_JFS_STATISTICS=y -+CONFIG_XFS_FS=m -+CONFIG_XFS_QUOTA=y -+CONFIG_XFS_POSIX_ACL=y -+CONFIG_XFS_RT=y -+CONFIG_GFS2_FS=m -+CONFIG_OCFS2_FS=m -+CONFIG_BTRFS_FS=m -+CONFIG_BTRFS_FS_POSIX_ACL=y -+CONFIG_NILFS2_FS=m -+CONFIG_FANOTIFY=y -+CONFIG_AUTOFS4_FS=y -+CONFIG_FUSE_FS=m -+CONFIG_CUSE=m -+CONFIG_FSCACHE=y -+CONFIG_FSCACHE_STATS=y -+CONFIG_FSCACHE_HISTOGRAM=y -+CONFIG_CACHEFILES=y -+CONFIG_ISO9660_FS=m -+CONFIG_JOLIET=y -+CONFIG_ZISOFS=y -+CONFIG_UDF_FS=m -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -+CONFIG_NTFS_FS=m -+CONFIG_TMPFS=y -+CONFIG_TMPFS_POSIX_ACL=y -+CONFIG_CONFIGFS_FS=y -+CONFIG_SQUASHFS=m -+CONFIG_SQUASHFS_XATTR=y -+CONFIG_SQUASHFS_LZO=y -+CONFIG_SQUASHFS_XZ=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3_ACL=y -+CONFIG_NFS_V4=y -+CONFIG_ROOT_NFS=y -+CONFIG_NFS_FSCACHE=y -+CONFIG_NFSD=m -+CONFIG_NFSD_V3_ACL=y -+CONFIG_NFSD_V4=y -+CONFIG_CIFS=m -+CONFIG_CIFS_WEAK_PW_HASH=y -+CONFIG_CIFS_XATTR=y -+CONFIG_CIFS_POSIX=y -+CONFIG_9P_FS=m -+CONFIG_9P_FS_POSIX_ACL=y -+CONFIG_NLS_DEFAULT="utf8" -+CONFIG_NLS_CODEPAGE_437=y -+CONFIG_NLS_CODEPAGE_737=m -+CONFIG_NLS_CODEPAGE_775=m -+CONFIG_NLS_CODEPAGE_850=m -+CONFIG_NLS_CODEPAGE_852=m -+CONFIG_NLS_CODEPAGE_855=m -+CONFIG_NLS_CODEPAGE_857=m -+CONFIG_NLS_CODEPAGE_860=m -+CONFIG_NLS_CODEPAGE_861=m -+CONFIG_NLS_CODEPAGE_862=m -+CONFIG_NLS_CODEPAGE_863=m -+CONFIG_NLS_CODEPAGE_864=m -+CONFIG_NLS_CODEPAGE_865=m -+CONFIG_NLS_CODEPAGE_866=m -+CONFIG_NLS_CODEPAGE_869=m -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+CONFIG_NLS_CODEPAGE_932=m -+CONFIG_NLS_CODEPAGE_949=m -+CONFIG_NLS_CODEPAGE_874=m -+CONFIG_NLS_ISO8859_8=m -+CONFIG_NLS_CODEPAGE_1250=m -+CONFIG_NLS_CODEPAGE_1251=m -+CONFIG_NLS_ASCII=y -+CONFIG_NLS_ISO8859_1=m -+CONFIG_NLS_ISO8859_2=m -+CONFIG_NLS_ISO8859_3=m -+CONFIG_NLS_ISO8859_4=m -+CONFIG_NLS_ISO8859_5=m -+CONFIG_NLS_ISO8859_6=m -+CONFIG_NLS_ISO8859_7=m -+CONFIG_NLS_ISO8859_9=m -+CONFIG_NLS_ISO8859_13=m -+CONFIG_NLS_ISO8859_14=m -+CONFIG_NLS_ISO8859_15=m -+CONFIG_NLS_KOI8_R=m -+CONFIG_NLS_KOI8_U=m -+CONFIG_NLS_UTF8=m -+CONFIG_PRINTK_TIME=y -+CONFIG_DETECT_HUNG_TASK=y -+CONFIG_TIMER_STATS=y -+CONFIG_DEBUG_STACK_USAGE=y -+CONFIG_DEBUG_INFO=y -+CONFIG_DEBUG_MEMORY_INIT=y -+CONFIG_BOOT_PRINTK_DELAY=y -+CONFIG_LATENCYTOP=y -+CONFIG_IRQSOFF_TRACER=y -+CONFIG_SCHED_TRACER=y -+CONFIG_STACK_TRACER=y -+CONFIG_BLK_DEV_IO_TRACE=y -+CONFIG_FUNCTION_PROFILER=y -+CONFIG_KGDB=y -+CONFIG_KGDB_KDB=y -+CONFIG_KDB_KEYBOARD=y -+CONFIG_STRICT_DEVMEM=y -+CONFIG_CRYPTO_SEQIV=m -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_HMAC=y -+CONFIG_CRYPTO_XCBC=m -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=y -+CONFIG_CRYPTO_SHA512=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_WP512=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_DES=y -+# CONFIG_CRYPTO_ANSI_CPRNG is not set -+# CONFIG_CRYPTO_HW is not set -+CONFIG_CRC_ITU_T=y -+CONFIG_LIBCRC32C=y ---- /dev/null -+++ b/arch/arm/configs/bcmrpi_emergency_defconfig -@@ -0,0 +1,532 @@ -+CONFIG_EXPERIMENTAL=y -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SYSVIPC=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_BSD_PROCESS_ACCT=y -+CONFIG_BSD_PROCESS_ACCT_V3=y -+CONFIG_FHANDLE=y -+CONFIG_AUDIT=y -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="../target_fs" -+CONFIG_CGROUP_FREEZER=y -+CONFIG_CGROUP_DEVICE=y -+CONFIG_CGROUP_CPUACCT=y -+CONFIG_RESOURCE_COUNTERS=y -+CONFIG_BLK_CGROUP=y -+CONFIG_NAMESPACES=y -+CONFIG_SCHED_AUTOGROUP=y -+CONFIG_EMBEDDED=y -+# CONFIG_COMPAT_BRK is not set -+CONFIG_SLAB=y -+CONFIG_PROFILING=y -+CONFIG_OPROFILE=m -+CONFIG_KPROBES=y -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODVERSIONS=y -+CONFIG_MODULE_SRCVERSION_ALL=y -+# CONFIG_BLK_DEV_BSG is not set -+CONFIG_BLK_DEV_THROTTLING=y -+CONFIG_CFQ_GROUP_IOSCHED=y -+CONFIG_ARCH_BCM2708=y -+CONFIG_NO_HZ=y -+CONFIG_HIGH_RES_TIMERS=y -+CONFIG_AEABI=y -+CONFIG_SECCOMP=y -+CONFIG_CC_STACKPROTECTOR=y -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait" -+CONFIG_KEXEC=y -+CONFIG_CPU_IDLE=y -+CONFIG_VFP=y -+CONFIG_BINFMT_MISC=m -+CONFIG_NET=y -+CONFIG_PACKET=y -+CONFIG_UNIX=y -+CONFIG_XFRM_USER=y -+CONFIG_NET_KEY=m -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+CONFIG_IP_PNP_RARP=y -+CONFIG_SYN_COOKIES=y -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+# CONFIG_INET_LRO is not set -+# CONFIG_INET_DIAG is not set -+# CONFIG_IPV6 is not set -+CONFIG_NET_PKTGEN=m -+CONFIG_IRDA=m -+CONFIG_IRLAN=m -+CONFIG_IRCOMM=m -+CONFIG_IRDA_ULTRA=y -+CONFIG_IRDA_CACHE_LAST_LSAP=y -+CONFIG_IRDA_FAST_RR=y -+CONFIG_IRTTY_SIR=m -+CONFIG_KINGSUN_DONGLE=m -+CONFIG_KSDAZZLE_DONGLE=m -+CONFIG_KS959_DONGLE=m -+CONFIG_USB_IRDA=m -+CONFIG_SIGMATEL_FIR=m -+CONFIG_MCS_FIR=m -+CONFIG_BT=m -+CONFIG_BT_L2CAP=y -+CONFIG_BT_SCO=y -+CONFIG_BT_RFCOMM=m -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=m -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+CONFIG_BT_HIDP=m -+CONFIG_BT_HCIBTUSB=m -+CONFIG_BT_HCIBCM203X=m -+CONFIG_BT_HCIBPA10X=m -+CONFIG_BT_HCIBFUSB=m -+CONFIG_BT_HCIVHCI=m -+CONFIG_BT_MRVL=m -+CONFIG_BT_MRVL_SDIO=m -+CONFIG_BT_ATH3K=m -+CONFIG_CFG80211=m -+CONFIG_MAC80211=m -+CONFIG_MAC80211_RC_PID=y -+CONFIG_MAC80211_MESH=y -+CONFIG_WIMAX=m -+CONFIG_NET_9P=m -+CONFIG_NFC=m -+CONFIG_NFC_PN533=m -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_BLK_DEV_LOOP=y -+CONFIG_BLK_DEV_CRYPTOLOOP=m -+CONFIG_BLK_DEV_NBD=m -+CONFIG_BLK_DEV_RAM=y -+CONFIG_CDROM_PKTCDVD=m -+CONFIG_MISC_DEVICES=y -+CONFIG_SCSI=y -+# CONFIG_SCSI_PROC_FS is not set -+CONFIG_BLK_DEV_SD=y -+CONFIG_BLK_DEV_SR=m -+CONFIG_SCSI_MULTI_LUN=y -+# CONFIG_SCSI_LOWLEVEL is not set -+CONFIG_MD=y -+CONFIG_NETDEVICES=y -+CONFIG_TUN=m -+CONFIG_PHYLIB=m -+CONFIG_MDIO_BITBANG=m -+CONFIG_NET_ETHERNET=y -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+CONFIG_LIBERTAS_THINFIRM=m -+CONFIG_LIBERTAS_THINFIRM_USB=m -+CONFIG_AT76C50X_USB=m -+CONFIG_USB_ZD1201=m -+CONFIG_USB_NET_RNDIS_WLAN=m -+CONFIG_RTL8187=m -+CONFIG_MAC80211_HWSIM=m -+CONFIG_ATH_COMMON=m -+CONFIG_ATH9K=m -+CONFIG_ATH9K_HTC=m -+CONFIG_CARL9170=m -+CONFIG_B43=m -+CONFIG_B43LEGACY=m -+CONFIG_HOSTAP=m -+CONFIG_IWM=m -+CONFIG_LIBERTAS=m -+CONFIG_LIBERTAS_USB=m -+CONFIG_LIBERTAS_SDIO=m -+CONFIG_P54_COMMON=m -+CONFIG_P54_USB=m -+CONFIG_RT2X00=m -+CONFIG_RT2500USB=m -+CONFIG_RT73USB=m -+CONFIG_RT2800USB=m -+CONFIG_RT2800USB_RT53XX=y -+CONFIG_RTL8192CU=m -+CONFIG_WL1251=m -+CONFIG_WL12XX_MENU=m -+CONFIG_ZD1211RW=m -+CONFIG_MWIFIEX=m -+CONFIG_MWIFIEX_SDIO=m -+CONFIG_WIMAX_I2400M_USB=m -+CONFIG_USB_CATC=m -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=m -+CONFIG_USB_RTL8150=m -+CONFIG_USB_USBNET=y -+CONFIG_USB_NET_AX8817X=m -+CONFIG_USB_NET_CDCETHER=m -+CONFIG_USB_NET_CDC_EEM=m -+CONFIG_USB_NET_DM9601=m -+CONFIG_USB_NET_SMSC75XX=m -+CONFIG_USB_NET_SMSC95XX=y -+CONFIG_USB_NET_GL620A=m -+CONFIG_USB_NET_NET1080=m -+CONFIG_USB_NET_PLUSB=m -+CONFIG_USB_NET_MCS7830=m -+CONFIG_USB_NET_CDC_SUBSET=m -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_KC2190=y -+# CONFIG_USB_NET_ZAURUS is not set -+CONFIG_USB_NET_CX82310_ETH=m -+CONFIG_USB_NET_KALMIA=m -+CONFIG_USB_NET_INT51X1=m -+CONFIG_USB_IPHETH=m -+CONFIG_USB_SIERRA_NET=m -+CONFIG_USB_VL600=m -+CONFIG_PPP=m -+CONFIG_PPP_ASYNC=m -+CONFIG_PPP_SYNC_TTY=m -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+CONFIG_SLIP=m -+CONFIG_SLIP_COMPRESSED=y -+CONFIG_NETCONSOLE=m -+CONFIG_INPUT_POLLDEV=m -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_JOYDEV=m -+CONFIG_INPUT_EVDEV=m -+# CONFIG_INPUT_KEYBOARD is not set -+# CONFIG_INPUT_MOUSE is not set -+CONFIG_INPUT_MISC=y -+CONFIG_INPUT_AD714X=m -+CONFIG_INPUT_ATI_REMOTE=m -+CONFIG_INPUT_ATI_REMOTE2=m -+CONFIG_INPUT_KEYSPAN_REMOTE=m -+CONFIG_INPUT_POWERMATE=m -+CONFIG_INPUT_YEALINK=m -+CONFIG_INPUT_CM109=m -+CONFIG_INPUT_UINPUT=m -+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -+CONFIG_INPUT_ADXL34X=m -+CONFIG_INPUT_CMA3000=m -+CONFIG_SERIO=m -+CONFIG_SERIO_RAW=m -+CONFIG_GAMEPORT=m -+CONFIG_GAMEPORT_NS558=m -+CONFIG_GAMEPORT_L4=m -+CONFIG_VT_HW_CONSOLE_BINDING=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_DEVKMEM is not set -+CONFIG_SERIAL_AMBA_PL011=y -+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -+# CONFIG_HW_RANDOM is not set -+CONFIG_RAW_DRIVER=y -+CONFIG_GPIO_SYSFS=y -+# CONFIG_HWMON is not set -+CONFIG_WATCHDOG=y -+CONFIG_BCM2708_WDT=m -+# CONFIG_MFD_SUPPORT is not set -+CONFIG_FB=y -+CONFIG_FB_BCM2708=y -+CONFIG_FRAMEBUFFER_CONSOLE=y -+CONFIG_LOGO=y -+# CONFIG_LOGO_LINUX_MONO is not set -+# CONFIG_LOGO_LINUX_VGA16 is not set -+CONFIG_SOUND=y -+CONFIG_SND=m -+CONFIG_SND_SEQUENCER=m -+CONFIG_SND_SEQ_DUMMY=m -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_SEQUENCER_OSS=y -+CONFIG_SND_HRTIMER=m -+CONFIG_SND_DUMMY=m -+CONFIG_SND_ALOOP=m -+CONFIG_SND_VIRMIDI=m -+CONFIG_SND_MTPAV=m -+CONFIG_SND_SERIAL_U16550=m -+CONFIG_SND_MPU401=m -+CONFIG_SND_BCM2835=m -+CONFIG_SND_USB_AUDIO=m -+CONFIG_SND_USB_UA101=m -+CONFIG_SND_USB_CAIAQ=m -+CONFIG_SND_USB_6FIRE=m -+CONFIG_SOUND_PRIME=m -+CONFIG_HID_PID=y -+CONFIG_USB_HIDDEV=y -+CONFIG_HID_A4TECH=m -+CONFIG_HID_ACRUX=m -+CONFIG_HID_APPLE=m -+CONFIG_HID_BELKIN=m -+CONFIG_HID_CHERRY=m -+CONFIG_HID_CHICONY=m -+CONFIG_HID_CYPRESS=m -+CONFIG_HID_DRAGONRISE=m -+CONFIG_HID_EMS_FF=m -+CONFIG_HID_ELECOM=m -+CONFIG_HID_EZKEY=m -+CONFIG_HID_HOLTEK=m -+CONFIG_HID_KEYTOUCH=m -+CONFIG_HID_KYE=m -+CONFIG_HID_UCLOGIC=m -+CONFIG_HID_WALTOP=m -+CONFIG_HID_GYRATION=m -+CONFIG_HID_TWINHAN=m -+CONFIG_HID_KENSINGTON=m -+CONFIG_HID_LCPOWER=m -+CONFIG_HID_LOGITECH=m -+CONFIG_HID_MAGICMOUSE=m -+CONFIG_HID_MICROSOFT=m -+CONFIG_HID_MONTEREY=m -+CONFIG_HID_MULTITOUCH=m -+CONFIG_HID_NTRIG=m -+CONFIG_HID_ORTEK=m -+CONFIG_HID_PANTHERLORD=m -+CONFIG_HID_PETALYNX=m -+CONFIG_HID_PICOLCD=m -+CONFIG_HID_QUANTA=m -+CONFIG_HID_ROCCAT=m -+CONFIG_HID_SAMSUNG=m -+CONFIG_HID_SONY=m -+CONFIG_HID_SPEEDLINK=m -+CONFIG_HID_SUNPLUS=m -+CONFIG_HID_GREENASIA=m -+CONFIG_HID_SMARTJOYPLUS=m -+CONFIG_HID_TOPSEED=m -+CONFIG_HID_THRUSTMASTER=m -+CONFIG_HID_WACOM=m -+CONFIG_HID_WIIMOTE=m -+CONFIG_HID_ZEROPLUS=m -+CONFIG_HID_ZYDACRON=m -+CONFIG_USB=y -+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -+CONFIG_USB_MON=m -+CONFIG_USB_DWCOTG=y -+CONFIG_USB_STORAGE=y -+CONFIG_USB_STORAGE_REALTEK=m -+CONFIG_USB_STORAGE_DATAFAB=m -+CONFIG_USB_STORAGE_FREECOM=m -+CONFIG_USB_STORAGE_ISD200=m -+CONFIG_USB_STORAGE_USBAT=m -+CONFIG_USB_STORAGE_SDDR09=m -+CONFIG_USB_STORAGE_SDDR55=m -+CONFIG_USB_STORAGE_JUMPSHOT=m -+CONFIG_USB_STORAGE_ALAUDA=m -+CONFIG_USB_STORAGE_ONETOUCH=m -+CONFIG_USB_STORAGE_KARMA=m -+CONFIG_USB_STORAGE_CYPRESS_ATACB=m -+CONFIG_USB_STORAGE_ENE_UB6250=m -+CONFIG_USB_UAS=y -+CONFIG_USB_LIBUSUAL=y -+CONFIG_USB_MDC800=m -+CONFIG_USB_MICROTEK=m -+CONFIG_USB_SERIAL=m -+CONFIG_USB_SERIAL_GENERIC=y -+CONFIG_USB_SERIAL_AIRCABLE=m -+CONFIG_USB_SERIAL_ARK3116=m -+CONFIG_USB_SERIAL_BELKIN=m -+CONFIG_USB_SERIAL_CH341=m -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP210X=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_FUNSOFT=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+CONFIG_USB_SERIAL_IUU=m -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+CONFIG_USB_SERIAL_KEYSPAN=m -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_MOS7720=m -+CONFIG_USB_SERIAL_MOS7840=m -+CONFIG_USB_SERIAL_MOTOROLA=m -+CONFIG_USB_SERIAL_NAVMAN=m -+CONFIG_USB_SERIAL_PL2303=m -+CONFIG_USB_SERIAL_OTI6858=m -+CONFIG_USB_SERIAL_QCAUX=m -+CONFIG_USB_SERIAL_QUALCOMM=m -+CONFIG_USB_SERIAL_SPCP8X5=m -+CONFIG_USB_SERIAL_HP4X=m -+CONFIG_USB_SERIAL_SAFE=m -+CONFIG_USB_SERIAL_SIEMENS_MPI=m -+CONFIG_USB_SERIAL_SIERRAWIRELESS=m -+CONFIG_USB_SERIAL_SYMBOL=m -+CONFIG_USB_SERIAL_TI=m -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OPTION=m -+CONFIG_USB_SERIAL_OMNINET=m -+CONFIG_USB_SERIAL_OPTICON=m -+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m -+CONFIG_USB_SERIAL_ZIO=m -+CONFIG_USB_SERIAL_SSU100=m -+CONFIG_USB_SERIAL_DEBUG=m -+CONFIG_USB_EMI62=m -+CONFIG_USB_EMI26=m -+CONFIG_USB_ADUTUX=m -+CONFIG_USB_SEVSEG=m -+CONFIG_USB_RIO500=m -+CONFIG_USB_LEGOTOWER=m -+CONFIG_USB_LCD=m -+CONFIG_USB_LED=m -+CONFIG_USB_CYPRESS_CY7C63=m -+CONFIG_USB_CYTHERM=m -+CONFIG_USB_IDMOUSE=m -+CONFIG_USB_FTDI_ELAN=m -+CONFIG_USB_APPLEDISPLAY=m -+CONFIG_USB_LD=m -+CONFIG_USB_TRANCEVIBRATOR=m -+CONFIG_USB_IOWARRIOR=m -+CONFIG_USB_TEST=m -+CONFIG_USB_ISIGHTFW=m -+CONFIG_USB_YUREX=m -+CONFIG_MMC=y -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_PLTFM=y -+CONFIG_MMC_SDHCI_BCM2708=y -+CONFIG_MMC_SDHCI_BCM2708_DMA=y -+CONFIG_LEDS_GPIO=y -+CONFIG_LEDS_TRIGGER_TIMER=m -+CONFIG_LEDS_TRIGGER_HEARTBEAT=m -+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m -+CONFIG_UIO=m -+CONFIG_UIO_PDRV=m -+CONFIG_UIO_PDRV_GENIRQ=m -+# CONFIG_IOMMU_SUPPORT is not set -+CONFIG_EXT4_FS=y -+CONFIG_EXT4_FS_POSIX_ACL=y -+CONFIG_EXT4_FS_SECURITY=y -+CONFIG_REISERFS_FS=m -+CONFIG_REISERFS_FS_XATTR=y -+CONFIG_REISERFS_FS_POSIX_ACL=y -+CONFIG_REISERFS_FS_SECURITY=y -+CONFIG_JFS_FS=m -+CONFIG_JFS_POSIX_ACL=y -+CONFIG_JFS_SECURITY=y -+CONFIG_JFS_STATISTICS=y -+CONFIG_XFS_FS=m -+CONFIG_XFS_QUOTA=y -+CONFIG_XFS_POSIX_ACL=y -+CONFIG_XFS_RT=y -+CONFIG_GFS2_FS=m -+CONFIG_OCFS2_FS=m -+CONFIG_BTRFS_FS=m -+CONFIG_BTRFS_FS_POSIX_ACL=y -+CONFIG_NILFS2_FS=m -+CONFIG_FANOTIFY=y -+CONFIG_AUTOFS4_FS=y -+CONFIG_FUSE_FS=m -+CONFIG_CUSE=m -+CONFIG_FSCACHE=y -+CONFIG_FSCACHE_STATS=y -+CONFIG_FSCACHE_HISTOGRAM=y -+CONFIG_CACHEFILES=y -+CONFIG_ISO9660_FS=m -+CONFIG_JOLIET=y -+CONFIG_ZISOFS=y -+CONFIG_UDF_FS=m -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -+CONFIG_NTFS_FS=m -+CONFIG_TMPFS=y -+CONFIG_TMPFS_POSIX_ACL=y -+CONFIG_CONFIGFS_FS=y -+CONFIG_SQUASHFS=m -+CONFIG_SQUASHFS_XATTR=y -+CONFIG_SQUASHFS_LZO=y -+CONFIG_SQUASHFS_XZ=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+CONFIG_NFS_V3_ACL=y -+CONFIG_NFS_V4=y -+CONFIG_ROOT_NFS=y -+CONFIG_NFS_FSCACHE=y -+CONFIG_CIFS=m -+CONFIG_CIFS_WEAK_PW_HASH=y -+CONFIG_CIFS_XATTR=y -+CONFIG_CIFS_POSIX=y -+CONFIG_9P_FS=m -+CONFIG_9P_FS_POSIX_ACL=y -+CONFIG_PARTITION_ADVANCED=y -+CONFIG_MAC_PARTITION=y -+CONFIG_EFI_PARTITION=y -+CONFIG_NLS_DEFAULT="utf8" -+CONFIG_NLS_CODEPAGE_437=y -+CONFIG_NLS_CODEPAGE_737=m -+CONFIG_NLS_CODEPAGE_775=m -+CONFIG_NLS_CODEPAGE_850=m -+CONFIG_NLS_CODEPAGE_852=m -+CONFIG_NLS_CODEPAGE_855=m -+CONFIG_NLS_CODEPAGE_857=m -+CONFIG_NLS_CODEPAGE_860=m -+CONFIG_NLS_CODEPAGE_861=m -+CONFIG_NLS_CODEPAGE_862=m -+CONFIG_NLS_CODEPAGE_863=m -+CONFIG_NLS_CODEPAGE_864=m -+CONFIG_NLS_CODEPAGE_865=m -+CONFIG_NLS_CODEPAGE_866=m -+CONFIG_NLS_CODEPAGE_869=m -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+CONFIG_NLS_CODEPAGE_932=m -+CONFIG_NLS_CODEPAGE_949=m -+CONFIG_NLS_CODEPAGE_874=m -+CONFIG_NLS_ISO8859_8=m -+CONFIG_NLS_CODEPAGE_1250=m -+CONFIG_NLS_CODEPAGE_1251=m -+CONFIG_NLS_ASCII=y -+CONFIG_NLS_ISO8859_1=m -+CONFIG_NLS_ISO8859_2=m -+CONFIG_NLS_ISO8859_3=m -+CONFIG_NLS_ISO8859_4=m -+CONFIG_NLS_ISO8859_5=m -+CONFIG_NLS_ISO8859_6=m -+CONFIG_NLS_ISO8859_7=m -+CONFIG_NLS_ISO8859_9=m -+CONFIG_NLS_ISO8859_13=m -+CONFIG_NLS_ISO8859_14=m -+CONFIG_NLS_ISO8859_15=m -+CONFIG_NLS_KOI8_R=m -+CONFIG_NLS_KOI8_U=m -+CONFIG_NLS_UTF8=m -+CONFIG_PRINTK_TIME=y -+CONFIG_DETECT_HUNG_TASK=y -+CONFIG_TIMER_STATS=y -+CONFIG_DEBUG_STACK_USAGE=y -+CONFIG_DEBUG_INFO=y -+CONFIG_DEBUG_MEMORY_INIT=y -+CONFIG_BOOT_PRINTK_DELAY=y -+CONFIG_LATENCYTOP=y -+CONFIG_SYSCTL_SYSCALL_CHECK=y -+CONFIG_IRQSOFF_TRACER=y -+CONFIG_SCHED_TRACER=y -+CONFIG_STACK_TRACER=y -+CONFIG_BLK_DEV_IO_TRACE=y -+CONFIG_FUNCTION_PROFILER=y -+CONFIG_KGDB=y -+CONFIG_KGDB_KDB=y -+CONFIG_KDB_KEYBOARD=y -+CONFIG_STRICT_DEVMEM=y -+CONFIG_CRYPTO_AUTHENC=m -+CONFIG_CRYPTO_SEQIV=m -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_HMAC=y -+CONFIG_CRYPTO_XCBC=m -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=y -+CONFIG_CRYPTO_SHA256=m -+CONFIG_CRYPTO_SHA512=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_WP512=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_DES=y -+CONFIG_CRYPTO_DEFLATE=m -+# CONFIG_CRYPTO_ANSI_CPRNG is not set -+# CONFIG_CRYPTO_HW is not set -+CONFIG_CRC_ITU_T=y -+CONFIG_LIBCRC32C=y ---- /dev/null -+++ b/arch/arm/configs/bcmrpi_quick_defconfig -@@ -0,0 +1,197 @@ -+# CONFIG_ARM_PATCH_PHYS_VIRT is not set -+CONFIG_LOCALVERSION="-quick" -+# CONFIG_LOCALVERSION_AUTO is not set -+# CONFIG_SWAP is not set -+CONFIG_SYSVIPC=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_NO_HZ=y -+CONFIG_HIGH_RES_TIMERS=y -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_KALLSYMS_ALL=y -+CONFIG_EMBEDDED=y -+CONFIG_PERF_EVENTS=y -+# CONFIG_COMPAT_BRK is not set -+CONFIG_SLAB=y -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODVERSIONS=y -+CONFIG_MODULE_SRCVERSION_ALL=y -+# CONFIG_BLK_DEV_BSG is not set -+CONFIG_ARCH_BCM2708=y -+CONFIG_PREEMPT=y -+CONFIG_AEABI=y -+CONFIG_UACCESS_WITH_MEMCPY=y -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -+CONFIG_CPU_IDLE=y -+CONFIG_VFP=y -+CONFIG_BINFMT_MISC=y -+CONFIG_NET=y -+CONFIG_PACKET=y -+CONFIG_UNIX=y -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+CONFIG_IP_PNP_RARP=y -+CONFIG_SYN_COOKIES=y -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+# CONFIG_INET_LRO is not set -+# CONFIG_INET_DIAG is not set -+# CONFIG_IPV6 is not set -+# CONFIG_WIRELESS is not set -+CONFIG_DEVTMPFS=y -+CONFIG_DEVTMPFS_MOUNT=y -+CONFIG_BLK_DEV_LOOP=y -+CONFIG_BLK_DEV_RAM=y -+CONFIG_SCSI=y -+# CONFIG_SCSI_PROC_FS is not set -+# CONFIG_SCSI_LOWLEVEL is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NET_VENDOR_BROADCOM is not set -+# CONFIG_NET_VENDOR_CIRRUS is not set -+# CONFIG_NET_VENDOR_FARADAY is not set -+# CONFIG_NET_VENDOR_INTEL is not set -+# CONFIG_NET_VENDOR_MARVELL is not set -+# CONFIG_NET_VENDOR_MICREL is not set -+# CONFIG_NET_VENDOR_NATSEMI is not set -+# CONFIG_NET_VENDOR_SEEQ is not set -+# CONFIG_NET_VENDOR_STMICRO is not set -+# CONFIG_NET_VENDOR_WIZNET is not set -+CONFIG_USB_USBNET=y -+# CONFIG_USB_NET_AX8817X is not set -+# CONFIG_USB_NET_CDCETHER is not set -+# CONFIG_USB_NET_CDC_NCM is not set -+CONFIG_USB_NET_SMSC95XX=y -+# CONFIG_USB_NET_NET1080 is not set -+# CONFIG_USB_NET_CDC_SUBSET is not set -+# CONFIG_USB_NET_ZAURUS is not set -+# CONFIG_WLAN is not set -+# CONFIG_INPUT_MOUSEDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_KEYBOARD is not set -+# CONFIG_INPUT_MOUSE is not set -+# CONFIG_SERIO is not set -+CONFIG_VT_HW_CONSOLE_BINDING=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_DEVKMEM is not set -+CONFIG_SERIAL_AMBA_PL011=y -+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -+CONFIG_TTY_PRINTK=y -+CONFIG_HW_RANDOM=y -+CONFIG_HW_RANDOM_BCM2708=y -+CONFIG_RAW_DRIVER=y -+CONFIG_THERMAL=y -+CONFIG_THERMAL_BCM2835=y -+CONFIG_WATCHDOG=y -+CONFIG_BCM2708_WDT=y -+CONFIG_REGULATOR=y -+CONFIG_REGULATOR_DEBUG=y -+CONFIG_REGULATOR_FIXED_VOLTAGE=y -+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y -+CONFIG_REGULATOR_USERSPACE_CONSUMER=y -+CONFIG_FB=y -+CONFIG_FB_BCM2708=y -+CONFIG_FRAMEBUFFER_CONSOLE=y -+CONFIG_LOGO=y -+# CONFIG_LOGO_LINUX_MONO is not set -+# CONFIG_LOGO_LINUX_VGA16 is not set -+CONFIG_SOUND=y -+CONFIG_SND=y -+CONFIG_SND_BCM2835=y -+# CONFIG_SND_USB is not set -+CONFIG_USB=y -+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -+CONFIG_USB_DWCOTG=y -+CONFIG_MMC=y -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_PLTFM=y -+CONFIG_MMC_SDHCI_BCM2708=y -+CONFIG_MMC_SDHCI_BCM2708_DMA=y -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+CONFIG_LEDS_TRIGGERS=y -+# CONFIG_IOMMU_SUPPORT is not set -+CONFIG_EXT4_FS=y -+CONFIG_EXT4_FS_POSIX_ACL=y -+CONFIG_EXT4_FS_SECURITY=y -+CONFIG_AUTOFS4_FS=y -+CONFIG_FSCACHE=y -+CONFIG_CACHEFILES=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -+CONFIG_TMPFS=y -+CONFIG_TMPFS_POSIX_ACL=y -+CONFIG_CONFIGFS_FS=y -+# CONFIG_MISC_FILESYSTEMS is not set -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3_ACL=y -+CONFIG_NFS_V4=y -+CONFIG_ROOT_NFS=y -+CONFIG_NFS_FSCACHE=y -+CONFIG_NLS_DEFAULT="utf8" -+CONFIG_NLS_CODEPAGE_437=y -+CONFIG_NLS_CODEPAGE_737=y -+CONFIG_NLS_CODEPAGE_775=y -+CONFIG_NLS_CODEPAGE_850=y -+CONFIG_NLS_CODEPAGE_852=y -+CONFIG_NLS_CODEPAGE_855=y -+CONFIG_NLS_CODEPAGE_857=y -+CONFIG_NLS_CODEPAGE_860=y -+CONFIG_NLS_CODEPAGE_861=y -+CONFIG_NLS_CODEPAGE_862=y -+CONFIG_NLS_CODEPAGE_863=y -+CONFIG_NLS_CODEPAGE_864=y -+CONFIG_NLS_CODEPAGE_865=y -+CONFIG_NLS_CODEPAGE_866=y -+CONFIG_NLS_CODEPAGE_869=y -+CONFIG_NLS_CODEPAGE_936=y -+CONFIG_NLS_CODEPAGE_950=y -+CONFIG_NLS_CODEPAGE_932=y -+CONFIG_NLS_CODEPAGE_949=y -+CONFIG_NLS_CODEPAGE_874=y -+CONFIG_NLS_ISO8859_8=y -+CONFIG_NLS_CODEPAGE_1250=y -+CONFIG_NLS_CODEPAGE_1251=y -+CONFIG_NLS_ASCII=y -+CONFIG_NLS_ISO8859_1=y -+CONFIG_NLS_ISO8859_2=y -+CONFIG_NLS_ISO8859_3=y -+CONFIG_NLS_ISO8859_4=y -+CONFIG_NLS_ISO8859_5=y -+CONFIG_NLS_ISO8859_6=y -+CONFIG_NLS_ISO8859_7=y -+CONFIG_NLS_ISO8859_9=y -+CONFIG_NLS_ISO8859_13=y -+CONFIG_NLS_ISO8859_14=y -+CONFIG_NLS_ISO8859_15=y -+CONFIG_NLS_UTF8=y -+CONFIG_PRINTK_TIME=y -+CONFIG_DEBUG_FS=y -+CONFIG_DETECT_HUNG_TASK=y -+# CONFIG_DEBUG_PREEMPT is not set -+# CONFIG_DEBUG_BUGVERBOSE is not set -+# CONFIG_FTRACE is not set -+CONFIG_KGDB=y -+CONFIG_KGDB_KDB=y -+# CONFIG_ARM_UNWIND is not set -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_HMAC=y -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=y -+CONFIG_CRYPTO_DES=y -+# CONFIG_CRYPTO_ANSI_CPRNG is not set -+# CONFIG_CRYPTO_HW is not set -+CONFIG_CRC_ITU_T=y -+CONFIG_LIBCRC32C=y ---- a/arch/arm/include/asm/fiq.h -+++ b/arch/arm/include/asm/fiq.h -@@ -42,6 +42,7 @@ extern void disable_fiq(int fiq); - /* helpers defined in fiqasm.S: */ - extern void __set_fiq_regs(unsigned long const *regs); - extern void __get_fiq_regs(unsigned long *regs); -+extern void __FIQ_Branch(unsigned long *regs); - - static inline void set_fiq_regs(struct pt_regs const *regs) - { ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -361,6 +361,23 @@ config ARCH_AT91 - This enables support for systems based on Atmel - AT91RM9200 and AT91SAM9* processors. - -+config ARCH_BCM2708 -+ bool "Broadcom BCM2708 family" -+ select CPU_V6 -+ select ARM_AMBA -+ select HAVE_CLK -+ select HAVE_SCHED_CLOCK -+ select NEED_MACH_MEMORY_H -+ select CLKDEV_LOOKUP -+ select ARCH_HAS_CPUFREQ -+ select GENERIC_CLOCKEVENTS -+ select ARM_ERRATA_411920 -+ select MACH_BCM2708 -+ select VC4 -+ select FIQ -+ help -+ This enables support for Broadcom BCM2708 boards. -+ - config ARCH_CLPS711X - bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" - select ARCH_REQUIRE_GPIOLIB -@@ -1025,6 +1042,7 @@ source "arch/arm/mach-virt/Kconfig" - source "arch/arm/mach-vt8500/Kconfig" - - source "arch/arm/mach-w90x900/Kconfig" -+source "arch/arm/mach-bcm2708/Kconfig" - - source "arch/arm/mach-zynq/Kconfig" - ---- a/arch/arm/Kconfig.debug -+++ b/arch/arm/Kconfig.debug -@@ -519,6 +519,14 @@ choice - For more details about semihosting, please see - chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. - -+ config DEBUG_BCM2708_UART0 -+ bool "Broadcom BCM2708 UART0 (PL011)" -+ depends on MACH_BCM2708 -+ help -+ Say Y here if you want the debug print routines to direct -+ their output to UART 0. The port must have been initialised -+ by the boot-loader before use. -+ - endchoice - - config DEBUG_EXYNOS_UART ---- a/arch/arm/kernel/armksyms.c -+++ b/arch/arm/kernel/armksyms.c -@@ -156,3 +156,7 @@ EXPORT_SYMBOL(__gnu_mcount_nc); - #ifdef CONFIG_ARM_PATCH_PHYS_VIRT - EXPORT_SYMBOL(__pv_phys_offset); - #endif -+ -+extern void v6wbi_flush_kern_tlb_range(void); -+EXPORT_SYMBOL(v6wbi_flush_kern_tlb_range); -+ ---- a/arch/arm/kernel/fiqasm.S -+++ b/arch/arm/kernel/fiqasm.S -@@ -25,6 +25,9 @@ - ENTRY(__set_fiq_regs) - mov r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE - mrs r1, cpsr -+@@@@@@@@@@@@@@@ hack: enable the fiq here to keep usb driver happy -+ and r1, #~PSR_F_BIT -+@@@@@@@@@@@@@@@ endhack: (need to find better place for this to happen) - msr cpsr_c, r2 @ select FIQ mode - mov r0, r0 @ avoid hazard prior to ARMv4 - ldmia r0!, {r8 - r12} -@@ -47,3 +50,7 @@ ENTRY(__get_fiq_regs) - mov r0, r0 @ avoid hazard prior to ARMv4 - mov pc, lr - ENDPROC(__get_fiq_regs) -+ -+ENTRY(__FIQ_Branch) -+ mov pc, r8 -+ENDPROC(__FIQ_Branch) ---- a/arch/arm/kernel/fiq.c -+++ b/arch/arm/kernel/fiq.c -@@ -141,6 +141,7 @@ void disable_fiq(int fiq) - EXPORT_SYMBOL(set_fiq_handler); - EXPORT_SYMBOL(__set_fiq_regs); /* defined in fiqasm.S */ - EXPORT_SYMBOL(__get_fiq_regs); /* defined in fiqasm.S */ -+EXPORT_SYMBOL(__FIQ_Branch); /* defined in fiqasm.S */ - EXPORT_SYMBOL(claim_fiq); - EXPORT_SYMBOL(release_fiq); - EXPORT_SYMBOL(enable_fiq); ---- /dev/null -+++ b/arch/arm/mach-bcm2708/armctrl.c -@@ -0,0 +1,219 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/armctrl.c -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include <linux/init.h> -+#include <linux/list.h> -+#include <linux/io.h> -+#include <linux/version.h> -+#include <linux/syscore_ops.h> -+#include <linux/interrupt.h> -+ -+#include <asm/mach/irq.h> -+#include <mach/hardware.h> -+#include "armctrl.h" -+ -+/* For support of kernels >= 3.0 assume only one VIC for now*/ -+static unsigned int remap_irqs[(INTERRUPT_ARASANSDIO + 1) - INTERRUPT_JPEG] = { -+ INTERRUPT_VC_JPEG, -+ INTERRUPT_VC_USB, -+ INTERRUPT_VC_3D, -+ INTERRUPT_VC_DMA2, -+ INTERRUPT_VC_DMA3, -+ INTERRUPT_VC_I2C, -+ INTERRUPT_VC_SPI, -+ INTERRUPT_VC_I2SPCM, -+ INTERRUPT_VC_SDIO, -+ INTERRUPT_VC_UART, -+ INTERRUPT_VC_ARASANSDIO -+}; -+ -+static void armctrl_mask_irq(struct irq_data *d) -+{ -+ static const unsigned int disables[4] = { -+ ARM_IRQ_DIBL1, -+ ARM_IRQ_DIBL2, -+ ARM_IRQ_DIBL3, -+ 0 -+ }; -+ -+ if (d->irq >= FIQ_START) { -+ writel(0, __io_address(ARM_IRQ_FAST)); -+ } else { -+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq); -+ writel(1 << (data & 0x1f), __io_address(disables[(data >> 5) & 0x3])); -+ } -+} -+ -+static void armctrl_unmask_irq(struct irq_data *d) -+{ -+ static const unsigned int enables[4] = { -+ ARM_IRQ_ENBL1, -+ ARM_IRQ_ENBL2, -+ ARM_IRQ_ENBL3, -+ 0 -+ }; -+ -+ if (d->irq >= FIQ_START) { -+ unsigned int data = -+ (unsigned int)irq_get_chip_data(d->irq) - FIQ_START; -+ writel(0x80 | data, __io_address(ARM_IRQ_FAST)); -+ } else { -+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq); -+ writel(1 << (data & 0x1f), __io_address(enables[(data >> 5) & 0x3])); -+ } -+} -+ -+#if defined(CONFIG_PM) -+ -+/* for kernels 3.xx use the new syscore_ops apis but for older kernels use the sys dev class */ -+ -+/* Static defines -+ * struct armctrl_device - VIC PM device (< 3.xx) -+ * @sysdev: The system device which is registered. (< 3.xx) -+ * @irq: The IRQ number for the base of the VIC. -+ * @base: The register base for the VIC. -+ * @resume_sources: A bitmask of interrupts for resume. -+ * @resume_irqs: The IRQs enabled for resume. -+ * @int_select: Save for VIC_INT_SELECT. -+ * @int_enable: Save for VIC_INT_ENABLE. -+ * @soft_int: Save for VIC_INT_SOFT. -+ * @protect: Save for VIC_PROTECT. -+ */ -+struct armctrl_info { -+ void __iomem *base; -+ int irq; -+ u32 resume_sources; -+ u32 resume_irqs; -+ u32 int_select; -+ u32 int_enable; -+ u32 soft_int; -+ u32 protect; -+} armctrl; -+ -+static int armctrl_suspend(void) -+{ -+ return 0; -+} -+ -+static void armctrl_resume(void) -+{ -+ return; -+} -+ -+/** -+ * armctrl_pm_register - Register a VIC for later power management control -+ * @base: The base address of the VIC. -+ * @irq: The base IRQ for the VIC. -+ * @resume_sources: bitmask of interrupts allowed for resume sources. -+ * -+ * For older kernels (< 3.xx) do - -+ * Register the VIC with the system device tree so that it can be notified -+ * of suspend and resume requests and ensure that the correct actions are -+ * taken to re-instate the settings on resume. -+ */ -+static void __init armctrl_pm_register(void __iomem * base, unsigned int irq, -+ u32 resume_sources) -+{ -+ armctrl.base = base; -+ armctrl.resume_sources = resume_sources; -+ armctrl.irq = irq; -+} -+ -+static int armctrl_set_wake(struct irq_data *d, unsigned int on) -+{ -+ unsigned int off = d->irq & 31; -+ u32 bit = 1 << off; -+ -+ if (!(bit & armctrl.resume_sources)) -+ return -EINVAL; -+ -+ if (on) -+ armctrl.resume_irqs |= bit; -+ else -+ armctrl.resume_irqs &= ~bit; -+ -+ return 0; -+} -+ -+#else -+static inline void armctrl_pm_register(void __iomem * base, unsigned int irq, -+ u32 arg1) -+{ -+} -+ -+#define armctrl_suspend NULL -+#define armctrl_resume NULL -+#define armctrl_set_wake NULL -+#endif /* CONFIG_PM */ -+ -+static struct syscore_ops armctrl_syscore_ops = { -+ .suspend = armctrl_suspend, -+ .resume = armctrl_resume, -+}; -+ -+/** -+ * armctrl_syscore_init - initicall to register VIC pm functions -+ * -+ * This is called via late_initcall() to register -+ * the resources for the VICs due to the early -+ * nature of the VIC's registration. -+*/ -+static int __init armctrl_syscore_init(void) -+{ -+ register_syscore_ops(&armctrl_syscore_ops); -+ return 0; -+} -+ -+late_initcall(armctrl_syscore_init); -+ -+static struct irq_chip armctrl_chip = { -+ .name = "ARMCTRL", -+ .irq_ack = armctrl_mask_irq, -+ .irq_mask = armctrl_mask_irq, -+ .irq_unmask = armctrl_unmask_irq, -+ .irq_set_wake = armctrl_set_wake, -+}; -+ -+/** -+ * armctrl_init - initialise a vectored interrupt controller -+ * @base: iomem base address -+ * @irq_start: starting interrupt number, must be muliple of 32 -+ * @armctrl_sources: bitmask of interrupt sources to allow -+ * @resume_sources: bitmask of interrupt sources to allow for resume -+ */ -+int __init armctrl_init(void __iomem * base, unsigned int irq_start, -+ u32 armctrl_sources, u32 resume_sources) -+{ -+ unsigned int irq; -+ -+ for (irq = 0; irq < NR_IRQS; irq++) { -+ unsigned int data = irq; -+ if (irq >= INTERRUPT_JPEG && irq <= INTERRUPT_ARASANSDIO) -+ data = remap_irqs[irq - INTERRUPT_JPEG]; -+ -+ irq_set_chip(irq, &armctrl_chip); -+ irq_set_chip_data(irq, (void *)data); -+ irq_set_handler(irq, handle_level_irq); -+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_DISABLED); -+ } -+ -+ armctrl_pm_register(base, irq_start, resume_sources); -+ init_FIQ(FIQ_START); -+ return 0; -+} ---- /dev/null -+++ b/arch/arm/mach-bcm2708/armctrl.h -@@ -0,0 +1,27 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/armctrl.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef __BCM2708_ARMCTRL_H -+#define __BCM2708_ARMCTRL_H -+ -+extern int __init armctrl_init(void __iomem * base, unsigned int irq_start, -+ u32 armctrl_sources, u32 resume_sources); -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/bcm2708.c -@@ -0,0 +1,885 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/bcm2708.c -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/dma-mapping.h> -+#include <linux/serial_8250.h> -+#include <linux/platform_device.h> -+#include <linux/syscore_ops.h> -+#include <linux/interrupt.h> -+#include <linux/amba/bus.h> -+#include <linux/amba/clcd.h> -+#include <linux/clockchips.h> -+#include <linux/cnt32_to_63.h> -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/spi/spi.h> -+#include <linux/w1-gpio.h> -+ -+#include <linux/version.h> -+#include <linux/clkdev.h> -+#include <asm/system.h> -+#include <mach/hardware.h> -+#include <asm/irq.h> -+#include <linux/leds.h> -+#include <asm/mach-types.h> -+#include <asm/sched_clock.h> -+ -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+#include <asm/mach/irq.h> -+#include <asm/mach/time.h> -+#include <asm/mach/map.h> -+ -+#include <mach/timex.h> -+#include <mach/dma.h> -+#include <mach/vcio.h> -+#include <mach/system.h> -+ -+#include <linux/delay.h> -+ -+#include "bcm2708.h" -+#include "armctrl.h" -+#include "clock.h" -+ -+#ifdef CONFIG_BCM_VC_CMA -+#include <linux/broadcom/vc_cma.h> -+#endif -+ -+ -+/* Effectively we have an IOMMU (ARM<->VideoCore map) that is set up to -+ * give us IO access only to 64Mbytes of physical memory (26 bits). We could -+ * represent this window by setting our dmamasks to 26 bits but, in fact -+ * we're not going to use addresses outside this range (they're not in real -+ * memory) so we don't bother. -+ * -+ * In the future we might include code to use this IOMMU to remap other -+ * physical addresses onto VideoCore memory then the use of 32-bits would be -+ * more legitimate. -+ */ -+#define DMA_MASK_BITS_COMMON 32 -+ -+// use GPIO 4 for the one-wire GPIO pin, if enabled -+#define W1_GPIO 4 -+ -+/* command line parameters */ -+static unsigned boardrev, serial; -+static unsigned uart_clock; -+ -+static void __init bcm2708_init_led(void); -+ -+void __init bcm2708_init_irq(void) -+{ -+ armctrl_init(__io_address(ARMCTRL_IC_BASE), 0, 0, 0); -+} -+ -+static struct map_desc bcm2708_io_desc[] __initdata = { -+ { -+ .virtual = IO_ADDRESS(ARMCTRL_BASE), -+ .pfn = __phys_to_pfn(ARMCTRL_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(UART0_BASE), -+ .pfn = __phys_to_pfn(UART0_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(UART1_BASE), -+ .pfn = __phys_to_pfn(UART1_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(DMA_BASE), -+ .pfn = __phys_to_pfn(DMA_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(MCORE_BASE), -+ .pfn = __phys_to_pfn(MCORE_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(ST_BASE), -+ .pfn = __phys_to_pfn(ST_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(USB_BASE), -+ .pfn = __phys_to_pfn(USB_BASE), -+ .length = SZ_128K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(PM_BASE), -+ .pfn = __phys_to_pfn(PM_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(GPIO_BASE), -+ .pfn = __phys_to_pfn(GPIO_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE} -+}; -+ -+void __init bcm2708_map_io(void) -+{ -+ iotable_init(bcm2708_io_desc, ARRAY_SIZE(bcm2708_io_desc)); -+} -+ -+/* The STC is a free running counter that increments at the rate of 1MHz */ -+#define STC_FREQ_HZ 1000000 -+ -+static inline uint32_t timer_read(void) -+{ -+ /* STC: a free running counter that increments at the rate of 1MHz */ -+ return readl(__io_address(ST_BASE + 0x04)); -+} -+ -+static unsigned long bcm2708_read_current_timer(void) -+{ -+ return timer_read(); -+} -+ -+static u32 notrace bcm2708_read_sched_clock(void) -+{ -+ return timer_read(); -+} -+ -+static cycle_t clksrc_read(struct clocksource *cs) -+{ -+ return timer_read(); -+} -+ -+static struct clocksource clocksource_stc = { -+ .name = "stc", -+ .rating = 300, -+ .read = clksrc_read, -+ .mask = CLOCKSOURCE_MASK(32), -+ .flags = CLOCK_SOURCE_IS_CONTINUOUS, -+}; -+ -+unsigned long frc_clock_ticks32(void) -+{ -+ return timer_read(); -+} -+ -+static void __init bcm2708_clocksource_init(void) -+{ -+ if (clocksource_register_hz(&clocksource_stc, STC_FREQ_HZ)) { -+ printk(KERN_ERR "timer: failed to initialize clock " -+ "source %s\n", clocksource_stc.name); -+ } -+} -+ -+ -+/* -+ * These are fixed clocks. -+ */ -+static struct clk ref24_clk = { -+ .rate = UART0_CLOCK, /* The UART is clocked at 3MHz via APB_CLK */ -+}; -+ -+static struct clk osc_clk = { -+#ifdef CONFIG_ARCH_BCM2708_CHIPIT -+ .rate = 27000000, -+#else -+ .rate = 500000000, /* ARM clock is set from the VideoCore booter */ -+#endif -+}; -+ -+/* warning - the USB needs a clock > 34MHz */ -+ -+static struct clk sdhost_clk = { -+#ifdef CONFIG_ARCH_BCM2708_CHIPIT -+ .rate = 4000000, /* 4MHz */ -+#else -+ .rate = 250000000, /* 250MHz */ -+#endif -+}; -+ -+static struct clk_lookup lookups[] = { -+ { /* UART0 */ -+ .dev_id = "dev:f1", -+ .clk = &ref24_clk, -+ }, -+ { /* USB */ -+ .dev_id = "bcm2708_usb", -+ .clk = &osc_clk, -+ }, { /* SPI */ -+ .dev_id = "bcm2708_spi.0", -+ .clk = &sdhost_clk, -+ }, { /* BSC0 */ -+ .dev_id = "bcm2708_i2c.0", -+ .clk = &sdhost_clk, -+ }, { /* BSC1 */ -+ .dev_id = "bcm2708_i2c.1", -+ .clk = &sdhost_clk, -+ } -+}; -+ -+#define UART0_IRQ { IRQ_UART, 0 /*NO_IRQ*/ } -+#define UART0_DMA { 15, 14 } -+ -+AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); -+ -+static struct amba_device *amba_devs[] __initdata = { -+ &uart0_device, -+}; -+ -+static struct resource bcm2708_dmaman_resources[] = { -+ { -+ .start = DMA_BASE, -+ .end = DMA_BASE + SZ_4K - 1, -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct platform_device bcm2708_dmaman_device = { -+ .name = BCM_DMAMAN_DRIVER_NAME, -+ .id = 0, /* first bcm2708_dma */ -+ .resource = bcm2708_dmaman_resources, -+ .num_resources = ARRAY_SIZE(bcm2708_dmaman_resources), -+}; -+ -+#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) -+static struct w1_gpio_platform_data w1_gpio_pdata = { -+ .pin = W1_GPIO, -+ .is_open_drain = 0, -+}; -+ -+static struct platform_device w1_device = { -+ .name = "w1-gpio", -+ .id = -1, -+ .dev.platform_data = &w1_gpio_pdata, -+}; -+#endif -+ -+static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); -+ -+static struct platform_device bcm2708_fb_device = { -+ .name = "bcm2708_fb", -+ .id = -1, /* only one bcm2708_fb */ -+ .resource = NULL, -+ .num_resources = 0, -+ .dev = { -+ .dma_mask = &fb_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), -+ }, -+}; -+ -+static struct plat_serial8250_port bcm2708_uart1_platform_data[] = { -+ { -+ .mapbase = UART1_BASE + 0x40, -+ .irq = IRQ_AUX, -+ .uartclk = 125000000, -+ .regshift = 2, -+ .iotype = UPIO_MEM, -+ .flags = UPF_FIXED_TYPE | UPF_IOREMAP | UPF_SKIP_TEST, -+ .type = PORT_8250, -+ }, -+ {}, -+}; -+ -+static struct platform_device bcm2708_uart1_device = { -+ .name = "serial8250", -+ .id = PLAT8250_DEV_PLATFORM, -+ .dev = { -+ .platform_data = bcm2708_uart1_platform_data, -+ }, -+}; -+ -+static struct resource bcm2708_usb_resources[] = { -+ [0] = { -+ .start = USB_BASE, -+ .end = USB_BASE + SZ_128K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = MPHI_BASE, -+ .end = MPHI_BASE + SZ_4K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [2] = { -+ .start = IRQ_HOSTPORT, -+ .end = IRQ_HOSTPORT, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+bool fiq_fix_enable = true; -+ -+static struct resource bcm2708_usb_resources_no_fiq_fix[] = { -+ [0] = { -+ .start = USB_BASE, -+ .end = USB_BASE + SZ_128K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = IRQ_USB, -+ .end = IRQ_USB, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 usb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); -+ -+static struct platform_device bcm2708_usb_device = { -+ .name = "bcm2708_usb", -+ .id = -1, /* only one bcm2708_usb */ -+ .resource = bcm2708_usb_resources, -+ .num_resources = ARRAY_SIZE(bcm2708_usb_resources), -+ .dev = { -+ .dma_mask = &usb_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), -+ }, -+}; -+ -+static struct resource bcm2708_vcio_resources[] = { -+ [0] = { /* mailbox/semaphore/doorbell access */ -+ .start = MCORE_BASE, -+ .end = MCORE_BASE + SZ_4K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+static u64 vcio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); -+ -+static struct platform_device bcm2708_vcio_device = { -+ .name = BCM_VCIO_DRIVER_NAME, -+ .id = -1, /* only one VideoCore I/O area */ -+ .resource = bcm2708_vcio_resources, -+ .num_resources = ARRAY_SIZE(bcm2708_vcio_resources), -+ .dev = { -+ .dma_mask = &vcio_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), -+ }, -+}; -+ -+#ifdef CONFIG_BCM2708_GPIO -+#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio" -+ -+static struct resource bcm2708_gpio_resources[] = { -+ [0] = { /* general purpose I/O */ -+ .start = GPIO_BASE, -+ .end = GPIO_BASE + SZ_4K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+static u64 gpio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); -+ -+static struct platform_device bcm2708_gpio_device = { -+ .name = BCM_GPIO_DRIVER_NAME, -+ .id = -1, /* only one VideoCore I/O area */ -+ .resource = bcm2708_gpio_resources, -+ .num_resources = ARRAY_SIZE(bcm2708_gpio_resources), -+ .dev = { -+ .dma_mask = &gpio_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), -+ }, -+}; -+#endif -+ -+static struct resource bcm2708_systemtimer_resources[] = { -+ [0] = { /* system timer access */ -+ .start = ST_BASE, -+ .end = ST_BASE + SZ_4K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = IRQ_TIMER3, -+ .end = IRQ_TIMER3, -+ .flags = IORESOURCE_IRQ, -+ } -+ -+}; -+ -+static u64 systemtimer_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); -+ -+static struct platform_device bcm2708_systemtimer_device = { -+ .name = "bcm2708_systemtimer", -+ .id = -1, /* only one VideoCore I/O area */ -+ .resource = bcm2708_systemtimer_resources, -+ .num_resources = ARRAY_SIZE(bcm2708_systemtimer_resources), -+ .dev = { -+ .dma_mask = &systemtimer_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), -+ }, -+}; -+ -+#ifdef CONFIG_MMC_SDHCI_BCM2708 /* Arasan emmc SD */ -+static struct resource bcm2708_emmc_resources[] = { -+ [0] = { -+ .start = EMMC_BASE, -+ .end = EMMC_BASE + SZ_256 - 1, /* we only need this area */ -+ /* the memory map actually makes SZ_4K available */ -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = IRQ_ARASANSDIO, -+ .end = IRQ_ARASANSDIO, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 bcm2708_emmc_dmamask = 0xffffffffUL; -+ -+struct platform_device bcm2708_emmc_device = { -+ .name = "bcm2708_sdhci", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(bcm2708_emmc_resources), -+ .resource = bcm2708_emmc_resources, -+ .dev = { -+ .dma_mask = &bcm2708_emmc_dmamask, -+ .coherent_dma_mask = 0xffffffffUL}, -+}; -+#endif /* CONFIG_MMC_SDHCI_BCM2708 */ -+ -+static struct resource bcm2708_powerman_resources[] = { -+ [0] = { -+ .start = PM_BASE, -+ .end = PM_BASE + SZ_256 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+static u64 powerman_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); -+ -+struct platform_device bcm2708_powerman_device = { -+ .name = "bcm2708_powerman", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(bcm2708_powerman_resources), -+ .resource = bcm2708_powerman_resources, -+ .dev = { -+ .dma_mask = &powerman_dmamask, -+ .coherent_dma_mask = 0xffffffffUL}, -+}; -+ -+ -+static struct platform_device bcm2708_alsa_devices[] = { -+ [0] = { -+ .name = "bcm2835_AUD0", -+ .id = 0, /* first audio device */ -+ .resource = 0, -+ .num_resources = 0, -+ }, -+ [1] = { -+ .name = "bcm2835_AUD1", -+ .id = 1, /* second audio device */ -+ .resource = 0, -+ .num_resources = 0, -+ }, -+ [2] = { -+ .name = "bcm2835_AUD2", -+ .id = 2, /* third audio device */ -+ .resource = 0, -+ .num_resources = 0, -+ }, -+ [3] = { -+ .name = "bcm2835_AUD3", -+ .id = 3, /* forth audio device */ -+ .resource = 0, -+ .num_resources = 0, -+ }, -+ [4] = { -+ .name = "bcm2835_AUD4", -+ .id = 4, /* fifth audio device */ -+ .resource = 0, -+ .num_resources = 0, -+ }, -+ [5] = { -+ .name = "bcm2835_AUD5", -+ .id = 5, /* sixth audio device */ -+ .resource = 0, -+ .num_resources = 0, -+ }, -+ [6] = { -+ .name = "bcm2835_AUD6", -+ .id = 6, /* seventh audio device */ -+ .resource = 0, -+ .num_resources = 0, -+ }, -+ [7] = { -+ .name = "bcm2835_AUD7", -+ .id = 7, /* eighth audio device */ -+ .resource = 0, -+ .num_resources = 0, -+ }, -+}; -+ -+static struct resource bcm2708_spi_resources[] = { -+ { -+ .start = SPI0_BASE, -+ .end = SPI0_BASE + SZ_256 - 1, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_SPI, -+ .end = IRQ_SPI, -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+ -+static struct platform_device bcm2708_spi_device = { -+ .name = "bcm2708_spi", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(bcm2708_spi_resources), -+ .resource = bcm2708_spi_resources, -+}; -+ -+#ifdef CONFIG_BCM2708_SPIDEV -+static struct spi_board_info bcm2708_spi_devices[] = { -+#ifdef CONFIG_SPI_SPIDEV -+ { -+ .modalias = "spidev", -+ .max_speed_hz = 500000, -+ .bus_num = 0, -+ .chip_select = 0, -+ .mode = SPI_MODE_0, -+ }, { -+ .modalias = "spidev", -+ .max_speed_hz = 500000, -+ .bus_num = 0, -+ .chip_select = 1, -+ .mode = SPI_MODE_0, -+ } -+#endif -+}; -+#endif -+ -+static struct resource bcm2708_bsc0_resources[] = { -+ { -+ .start = BSC0_BASE, -+ .end = BSC0_BASE + SZ_256 - 1, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = INTERRUPT_I2C, -+ .end = INTERRUPT_I2C, -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+static struct platform_device bcm2708_bsc0_device = { -+ .name = "bcm2708_i2c", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(bcm2708_bsc0_resources), -+ .resource = bcm2708_bsc0_resources, -+}; -+ -+ -+static struct resource bcm2708_bsc1_resources[] = { -+ { -+ .start = BSC1_BASE, -+ .end = BSC1_BASE + SZ_256 - 1, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = INTERRUPT_I2C, -+ .end = INTERRUPT_I2C, -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+static struct platform_device bcm2708_bsc1_device = { -+ .name = "bcm2708_i2c", -+ .id = 1, -+ .num_resources = ARRAY_SIZE(bcm2708_bsc1_resources), -+ .resource = bcm2708_bsc1_resources, -+}; -+ -+static struct platform_device bcm2835_hwmon_device = { -+ .name = "bcm2835_hwmon", -+}; -+ -+static struct platform_device bcm2835_thermal_device = { -+ .name = "bcm2835_thermal", -+}; -+ -+int __init bcm_register_device(struct platform_device *pdev) -+{ -+ int ret; -+ -+ ret = platform_device_register(pdev); -+ if (ret) -+ pr_debug("Unable to register platform device '%s': %d\n", -+ pdev->name, ret); -+ -+ return ret; -+} -+ -+static void bcm2708_restart(char mode, const char *cmd) -+{ -+ uint32_t pm_rstc, pm_wdog; -+ uint32_t timeout = 10; -+ -+ /* For quick reset notification add reboot=q to cmdline -+ */ -+ if(mode == 'q') -+ { -+ uint32_t pm_rsts = readl(__io_address(PM_RSTS)); -+ pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRQ_SET; -+ writel(pm_rsts, __io_address(PM_RSTS)); -+ } -+ -+ /* Setup watchdog for reset */ -+ pm_rstc = readl(__io_address(PM_RSTC)); -+ -+ pm_wdog = PM_PASSWORD | (timeout & PM_WDOG_TIME_SET); // watchdog timer = timer clock / 16; need password (31:16) + value (11:0) -+ pm_rstc = PM_PASSWORD | (pm_rstc & PM_RSTC_WRCFG_CLR) | PM_RSTC_WRCFG_FULL_RESET; -+ -+ writel(pm_wdog, __io_address(PM_WDOG)); -+ writel(pm_rstc, __io_address(PM_RSTC)); -+} -+ -+/* We can't really power off, but if we do the normal reset scheme, and indicate to bootcode.bin not to reboot, then most of the chip will be powered off */ -+static void bcm2708_power_off(void) -+{ -+ /* we set the watchdog hard reset bit here to distinguish this reset from the normal (full) reset. bootcode.bin will not reboot after a hard reset */ -+ uint32_t pm_rsts = readl(__io_address(PM_RSTS)); -+ pm_rsts = PM_PASSWORD | (pm_rsts & PM_RSTC_WRCFG_CLR) | PM_RSTS_HADWRH_SET; -+ writel(pm_rsts, __io_address(PM_RSTS)); -+ /* continue with normal reset mechanism */ -+ bcm2708_restart(0, ""); -+} -+ -+void __init bcm2708_init(void) -+{ -+ int i; -+ -+#if defined(CONFIG_BCM_VC_CMA) -+ vc_cma_early_init(); -+#endif -+ printk("bcm2708.uart_clock = %d\n", uart_clock); -+ pm_power_off = bcm2708_power_off; -+ -+ if (uart_clock) -+ lookups[0].clk->rate = uart_clock; -+ -+ for (i = 0; i < ARRAY_SIZE(lookups); i++) -+ clkdev_add(&lookups[i]); -+ -+ bcm_register_device(&bcm2708_dmaman_device); -+ bcm_register_device(&bcm2708_vcio_device); -+#ifdef CONFIG_BCM2708_GPIO -+ bcm_register_device(&bcm2708_gpio_device); -+#endif -+#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) -+ platform_device_register(&w1_device); -+#endif -+ bcm_register_device(&bcm2708_systemtimer_device); -+ bcm_register_device(&bcm2708_fb_device); -+ if (!fiq_fix_enable) -+ { -+ bcm2708_usb_device.resource = bcm2708_usb_resources_no_fiq_fix; -+ bcm2708_usb_device.num_resources = ARRAY_SIZE(bcm2708_usb_resources_no_fiq_fix); -+ } -+ bcm_register_device(&bcm2708_usb_device); -+ bcm_register_device(&bcm2708_uart1_device); -+ bcm_register_device(&bcm2708_powerman_device); -+ -+#ifdef CONFIG_MMC_SDHCI_BCM2708 -+ bcm_register_device(&bcm2708_emmc_device); -+#endif -+ bcm2708_init_led(); -+ for (i = 0; i < ARRAY_SIZE(bcm2708_alsa_devices); i++) -+ bcm_register_device(&bcm2708_alsa_devices[i]); -+ -+ bcm_register_device(&bcm2708_spi_device); -+ bcm_register_device(&bcm2708_bsc0_device); -+ bcm_register_device(&bcm2708_bsc1_device); -+ -+ bcm_register_device(&bcm2835_hwmon_device); -+ bcm_register_device(&bcm2835_thermal_device); -+ -+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { -+ struct amba_device *d = amba_devs[i]; -+ amba_device_register(d, &iomem_resource); -+ } -+ system_rev = boardrev; -+ system_serial_low = serial; -+ -+#ifdef CONFIG_BCM2708_SPIDEV -+ spi_register_board_info(bcm2708_spi_devices, -+ ARRAY_SIZE(bcm2708_spi_devices)); -+#endif -+} -+ -+static void timer_set_mode(enum clock_event_mode mode, -+ struct clock_event_device *clk) -+{ -+ switch (mode) { -+ case CLOCK_EVT_MODE_ONESHOT: /* Leave the timer disabled, .set_next_event will enable it */ -+ case CLOCK_EVT_MODE_SHUTDOWN: -+ break; -+ case CLOCK_EVT_MODE_PERIODIC: -+ -+ case CLOCK_EVT_MODE_UNUSED: -+ case CLOCK_EVT_MODE_RESUME: -+ -+ default: -+ printk(KERN_ERR "timer_set_mode: unhandled mode:%d\n", -+ (int)mode); -+ break; -+ } -+ -+} -+ -+static int timer_set_next_event(unsigned long cycles, -+ struct clock_event_device *unused) -+{ -+ unsigned long stc; -+ -+ stc = readl(__io_address(ST_BASE + 0x04)); -+ writel(stc + cycles, __io_address(ST_BASE + 0x18)); /* stc3 */ -+ return 0; -+} -+ -+static struct clock_event_device timer0_clockevent = { -+ .name = "timer0", -+ .shift = 32, -+ .features = CLOCK_EVT_FEAT_ONESHOT, -+ .set_mode = timer_set_mode, -+ .set_next_event = timer_set_next_event, -+}; -+ -+/* -+ * IRQ handler for the timer -+ */ -+static irqreturn_t bcm2708_timer_interrupt(int irq, void *dev_id) -+{ -+ struct clock_event_device *evt = &timer0_clockevent; -+ -+ writel(1 << 3, __io_address(ST_BASE + 0x00)); /* stcs clear timer int */ -+ -+ evt->event_handler(evt); -+ -+ return IRQ_HANDLED; -+} -+ -+static struct irqaction bcm2708_timer_irq = { -+ .name = "BCM2708 Timer Tick", -+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, -+ .handler = bcm2708_timer_interrupt, -+}; -+ -+/* -+ * Set up timer interrupt, and return the current time in seconds. -+ */ -+ -+static struct delay_timer bcm2708_delay_timer = { -+ .read_current_timer = bcm2708_read_current_timer, -+ .freq = STC_FREQ_HZ, -+}; -+ -+static void __init bcm2708_timer_init(void) -+{ -+ /* init high res timer */ -+ bcm2708_clocksource_init(); -+ -+ /* -+ * Initialise to a known state (all timers off) -+ */ -+ writel(0, __io_address(ARM_T_CONTROL)); -+ /* -+ * Make irqs happen for the system timer -+ */ -+ setup_irq(IRQ_TIMER3, &bcm2708_timer_irq); -+ -+ setup_sched_clock(bcm2708_read_sched_clock, 32, STC_FREQ_HZ); -+ -+ timer0_clockevent.mult = -+ div_sc(STC_FREQ_HZ, NSEC_PER_SEC, timer0_clockevent.shift); -+ timer0_clockevent.max_delta_ns = -+ clockevent_delta2ns(0xffffffff, &timer0_clockevent); -+ timer0_clockevent.min_delta_ns = -+ clockevent_delta2ns(0xf, &timer0_clockevent); -+ -+ timer0_clockevent.cpumask = cpumask_of(0); -+ clockevents_register_device(&timer0_clockevent); -+ -+ register_current_timer_delay(&bcm2708_delay_timer); -+} -+ -+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -+#include <linux/leds.h> -+ -+static struct gpio_led bcm2708_leds[] = { -+ [0] = { -+ .gpio = 16, -+ .name = "led0", -+ .default_trigger = "mmc0", -+ .active_low = 1, -+ }, -+}; -+ -+static struct gpio_led_platform_data bcm2708_led_pdata = { -+ .num_leds = ARRAY_SIZE(bcm2708_leds), -+ .leds = bcm2708_leds, -+}; -+ -+static struct platform_device bcm2708_led_device = { -+ .name = "leds-gpio", -+ .id = -1, -+ .dev = { -+ .platform_data = &bcm2708_led_pdata, -+ }, -+}; -+ -+static void __init bcm2708_init_led(void) -+{ -+ platform_device_register(&bcm2708_led_device); -+} -+#else -+static inline void bcm2708_init_led(void) -+{ -+} -+#endif -+ -+void __init bcm2708_init_early(void) -+{ -+ /* -+ * Some devices allocate their coherent buffers from atomic -+ * context. Increase size of atomic coherent pool to make sure such -+ * the allocations won't fail. -+ */ -+ init_dma_coherent_pool_size(SZ_4M); -+} -+ -+static void __init board_reserve(void) -+{ -+#if defined(CONFIG_BCM_VC_CMA) -+ vc_cma_reserve(); -+#endif -+} -+ -+MACHINE_START(BCM2708, "BCM2708") -+ /* Maintainer: Broadcom Europe Ltd. */ -+ .map_io = bcm2708_map_io, -+ .init_irq = bcm2708_init_irq, -+ .init_time = bcm2708_timer_init, -+ .init_machine = bcm2708_init, -+ .init_early = bcm2708_init_early, -+ .reserve = board_reserve, -+ .restart = bcm2708_restart, -+MACHINE_END -+ -+module_param(boardrev, uint, 0644); -+module_param(serial, uint, 0644); -+module_param(uart_clock, uint, 0644); ---- /dev/null -+++ b/arch/arm/mach-bcm2708/bcm2708_gpio.c -@@ -0,0 +1,339 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/bcm2708_gpio.c -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/spinlock.h> -+#include <linux/module.h> -+#include <linux/list.h> -+#include <linux/io.h> -+#include <linux/irq.h> -+#include <linux/interrupt.h> -+#include <linux/slab.h> -+#include <mach/gpio.h> -+#include <linux/gpio.h> -+#include <linux/platform_device.h> -+#include <mach/platform.h> -+ -+#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio" -+#define DRIVER_NAME BCM_GPIO_DRIVER_NAME -+#define BCM_GPIO_USE_IRQ 1 -+ -+#define GPIOFSEL(x) (0x00+(x)*4) -+#define GPIOSET(x) (0x1c+(x)*4) -+#define GPIOCLR(x) (0x28+(x)*4) -+#define GPIOLEV(x) (0x34+(x)*4) -+#define GPIOEDS(x) (0x40+(x)*4) -+#define GPIOREN(x) (0x4c+(x)*4) -+#define GPIOFEN(x) (0x58+(x)*4) -+#define GPIOHEN(x) (0x64+(x)*4) -+#define GPIOLEN(x) (0x70+(x)*4) -+#define GPIOAREN(x) (0x7c+(x)*4) -+#define GPIOAFEN(x) (0x88+(x)*4) -+#define GPIOUD(x) (0x94+(x)*4) -+#define GPIOUDCLK(x) (0x98+(x)*4) -+ -+enum { GPIO_FSEL_INPUT, GPIO_FSEL_OUTPUT, -+ GPIO_FSEL_ALT5, GPIO_FSEL_ALT_4, -+ GPIO_FSEL_ALT0, GPIO_FSEL_ALT1, -+ GPIO_FSEL_ALT2, GPIO_FSEL_ALT3, -+}; -+ -+ /* Each of the two spinlocks protects a different set of hardware -+ * regiters and data structurs. This decouples the code of the IRQ from -+ * the GPIO code. This also makes the case of a GPIO routine call from -+ * the IRQ code simpler. -+ */ -+static DEFINE_SPINLOCK(lock); /* GPIO registers */ -+ -+struct bcm2708_gpio { -+ struct list_head list; -+ void __iomem *base; -+ struct gpio_chip gc; -+ unsigned long rising; -+ unsigned long falling; -+}; -+ -+static int bcm2708_set_function(struct gpio_chip *gc, unsigned offset, -+ int function) -+{ -+ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc); -+ unsigned long flags; -+ unsigned gpiodir; -+ unsigned gpio_bank = offset / 10; -+ unsigned gpio_field_offset = (offset - 10 * gpio_bank) * 3; -+ -+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set_function %p (%d,%d)\n", gc, offset, function); -+ if (offset >= ARCH_NR_GPIOS) -+ return -EINVAL; -+ -+ spin_lock_irqsave(&lock, flags); -+ -+ gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank)); -+ gpiodir &= ~(7 << gpio_field_offset); -+ gpiodir |= function << gpio_field_offset; -+ writel(gpiodir, gpio->base + GPIOFSEL(gpio_bank)); -+ spin_unlock_irqrestore(&lock, flags); -+ gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank)); -+ -+ return 0; -+} -+ -+static int bcm2708_gpio_dir_in(struct gpio_chip *gc, unsigned offset) -+{ -+ return bcm2708_set_function(gc, offset, GPIO_FSEL_INPUT); -+} -+ -+static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value); -+static int bcm2708_gpio_dir_out(struct gpio_chip *gc, unsigned offset, -+ int value) -+{ -+ int ret; -+ ret = bcm2708_set_function(gc, offset, GPIO_FSEL_OUTPUT); -+ if (ret >= 0) -+ bcm2708_gpio_set(gc, offset, value); -+ return ret; -+} -+ -+static int bcm2708_gpio_get(struct gpio_chip *gc, unsigned offset) -+{ -+ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc); -+ unsigned gpio_bank = offset / 32; -+ unsigned gpio_field_offset = (offset - 32 * gpio_bank); -+ unsigned lev; -+ -+ if (offset >= ARCH_NR_GPIOS) -+ return 0; -+ lev = readl(gpio->base + GPIOLEV(gpio_bank)); -+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_get %p (%d)=%d\n", gc, offset, 0x1 & (lev>>gpio_field_offset)); -+ return 0x1 & (lev >> gpio_field_offset); -+} -+ -+static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value) -+{ -+ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc); -+ unsigned gpio_bank = offset / 32; -+ unsigned gpio_field_offset = (offset - 32 * gpio_bank); -+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set %p (%d=%d)\n", gc, offset, value); -+ if (offset >= ARCH_NR_GPIOS) -+ return; -+ if (value) -+ writel(1 << gpio_field_offset, gpio->base + GPIOSET(gpio_bank)); -+ else -+ writel(1 << gpio_field_offset, gpio->base + GPIOCLR(gpio_bank)); -+} -+ -+/************************************************************************************************************************* -+ * bcm2708 GPIO IRQ -+ */ -+ -+#if BCM_GPIO_USE_IRQ -+ -+static int bcm2708_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ return gpio_to_irq(gpio); -+} -+ -+static int bcm2708_gpio_irq_set_type(struct irq_data *d, unsigned type) -+{ -+ unsigned irq = d->irq; -+ struct bcm2708_gpio *gpio = irq_get_chip_data(irq); -+ -+ if (type & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) -+ return -EINVAL; -+ -+ if (type & IRQ_TYPE_EDGE_RISING) { -+ gpio->rising |= (1 << irq_to_gpio(irq)); -+ } else { -+ gpio->rising &= ~(1 << irq_to_gpio(irq)); -+ } -+ -+ if (type & IRQ_TYPE_EDGE_FALLING) { -+ gpio->falling |= (1 << irq_to_gpio(irq)); -+ } else { -+ gpio->falling &= ~(1 << irq_to_gpio(irq)); -+ } -+ return 0; -+} -+ -+static void bcm2708_gpio_irq_mask(struct irq_data *d) -+{ -+ unsigned irq = d->irq; -+ struct bcm2708_gpio *gpio = irq_get_chip_data(irq); -+ unsigned gn = irq_to_gpio(irq); -+ unsigned gb = gn / 32; -+ unsigned long rising = readl(gpio->base + GPIOREN(gb)); -+ unsigned long falling = readl(gpio->base + GPIOFEN(gb)); -+ -+ gn = gn % 32; -+ -+ writel(rising & ~(1 << gn), gpio->base + GPIOREN(gb)); -+ writel(falling & ~(1 << gn), gpio->base + GPIOFEN(gb)); -+} -+ -+static void bcm2708_gpio_irq_unmask(struct irq_data *d) -+{ -+ unsigned irq = d->irq; -+ struct bcm2708_gpio *gpio = irq_get_chip_data(irq); -+ unsigned gn = irq_to_gpio(irq); -+ unsigned gb = gn / 32; -+ unsigned long rising = readl(gpio->base + GPIOREN(gb)); -+ unsigned long falling = readl(gpio->base + GPIOFEN(gb)); -+ -+ gn = gn % 32; -+ -+ writel(1 << gn, gpio->base + GPIOEDS(gb)); -+ -+ if (gpio->rising & (1 << gn)) { -+ writel(rising | (1 << gn), gpio->base + GPIOREN(gb)); -+ } else { -+ writel(rising & ~(1 << gn), gpio->base + GPIOREN(gb)); -+ } -+ -+ if (gpio->falling & (1 << gn)) { -+ writel(falling | (1 << gn), gpio->base + GPIOFEN(gb)); -+ } else { -+ writel(falling & ~(1 << gn), gpio->base + GPIOFEN(gb)); -+ } -+} -+ -+static struct irq_chip bcm2708_irqchip = { -+ .name = "GPIO", -+ .irq_enable = bcm2708_gpio_irq_unmask, -+ .irq_disable = bcm2708_gpio_irq_mask, -+ .irq_unmask = bcm2708_gpio_irq_unmask, -+ .irq_mask = bcm2708_gpio_irq_mask, -+ .irq_set_type = bcm2708_gpio_irq_set_type, -+}; -+ -+static irqreturn_t bcm2708_gpio_interrupt(int irq, void *dev_id) -+{ -+ unsigned long edsr; -+ unsigned bank; -+ int i; -+ unsigned gpio; -+ for (bank = 0; bank <= 1; bank++) { -+ edsr = readl(__io_address(GPIO_BASE) + GPIOEDS(bank)); -+ for_each_set_bit(i, &edsr, 32) { -+ gpio = i + bank * 32; -+ generic_handle_irq(gpio_to_irq(gpio)); -+ } -+ writel(0xffffffff, __io_address(GPIO_BASE) + GPIOEDS(bank)); -+ } -+ return IRQ_HANDLED; -+} -+ -+static struct irqaction bcm2708_gpio_irq = { -+ .name = "BCM2708 GPIO catchall handler", -+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, -+ .handler = bcm2708_gpio_interrupt, -+}; -+ -+static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb) -+{ -+ unsigned irq; -+ -+ ucb->gc.to_irq = bcm2708_gpio_to_irq; -+ -+ for (irq = GPIO_IRQ_START; irq < (GPIO_IRQ_START + GPIO_IRQS); irq++) { -+ irq_set_chip_data(irq, ucb); -+ irq_set_chip(irq, &bcm2708_irqchip); -+ set_irq_flags(irq, IRQF_VALID); -+ } -+ setup_irq(IRQ_GPIO3, &bcm2708_gpio_irq); -+} -+ -+#else -+ -+static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb) -+{ -+} -+ -+#endif /* #if BCM_GPIO_USE_IRQ ***************************************************************************************************************** */ -+ -+static int bcm2708_gpio_probe(struct platform_device *dev) -+{ -+ struct bcm2708_gpio *ucb; -+ struct resource *res; -+ int err = 0; -+ -+ printk(KERN_INFO DRIVER_NAME ": bcm2708_gpio_probe %p\n", dev); -+ -+ ucb = kzalloc(sizeof(*ucb), GFP_KERNEL); -+ if (NULL == ucb) { -+ printk(KERN_ERR DRIVER_NAME ": failed to allocate " -+ "mailbox memory\n"); -+ err = -ENOMEM; -+ goto err; -+ } -+ -+ res = platform_get_resource(dev, IORESOURCE_MEM, 0); -+ -+ platform_set_drvdata(dev, ucb); -+ ucb->base = __io_address(GPIO_BASE); -+ -+ ucb->gc.label = "bcm2708_gpio"; -+ ucb->gc.base = 0; -+ ucb->gc.ngpio = ARCH_NR_GPIOS; -+ ucb->gc.owner = THIS_MODULE; -+ -+ ucb->gc.direction_input = bcm2708_gpio_dir_in; -+ ucb->gc.direction_output = bcm2708_gpio_dir_out; -+ ucb->gc.get = bcm2708_gpio_get; -+ ucb->gc.set = bcm2708_gpio_set; -+ ucb->gc.can_sleep = 0; -+ -+ bcm2708_gpio_irq_init(ucb); -+ -+ err = gpiochip_add(&ucb->gc); -+ if (err) -+ goto err; -+ -+err: -+ return err; -+ -+} -+ -+static int bcm2708_gpio_remove(struct platform_device *dev) -+{ -+ int err = 0; -+ struct bcm2708_gpio *ucb = platform_get_drvdata(dev); -+ -+ printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_remove %p\n", dev); -+ -+ err = gpiochip_remove(&ucb->gc); -+ -+ platform_set_drvdata(dev, NULL); -+ kfree(ucb); -+ -+ return err; -+} -+ -+static struct platform_driver bcm2708_gpio_driver = { -+ .probe = bcm2708_gpio_probe, -+ .remove = bcm2708_gpio_remove, -+ .driver = { -+ .name = "bcm2708_gpio"}, -+}; -+ -+static int __init bcm2708_gpio_init(void) -+{ -+ return platform_driver_register(&bcm2708_gpio_driver); -+} -+ -+static void __exit bcm2708_gpio_exit(void) -+{ -+ platform_driver_unregister(&bcm2708_gpio_driver); -+} -+ -+module_init(bcm2708_gpio_init); -+module_exit(bcm2708_gpio_exit); -+ -+MODULE_DESCRIPTION("Broadcom BCM2708 GPIO driver"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/arch/arm/mach-bcm2708/bcm2708.h -@@ -0,0 +1,51 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/bcm2708.h -+ * -+ * BCM2708 machine support header -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef __BCM2708_BCM2708_H -+#define __BCM2708_BCM2708_H -+ -+#include <linux/amba/bus.h> -+ -+extern void __init bcm2708_init(void); -+extern void __init bcm2708_init_irq(void); -+extern void __init bcm2708_map_io(void); -+extern struct sys_timer bcm2708_timer; -+extern unsigned int mmc_status(struct device *dev); -+ -+#define AMBA_DEVICE(name, busid, base, plat) \ -+static struct amba_device name##_device = { \ -+ .dev = { \ -+ .coherent_dma_mask = ~0, \ -+ .init_name = busid, \ -+ .platform_data = plat, \ -+ }, \ -+ .res = { \ -+ .start = base##_BASE, \ -+ .end = (base##_BASE) + SZ_4K - 1,\ -+ .flags = IORESOURCE_MEM, \ -+ }, \ -+ .dma_mask = ~0, \ -+ .irq = base##_IRQ, \ -+ /* .dma = base##_DMA,*/ \ -+} -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/clock.c -@@ -0,0 +1,61 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/clock.c -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/device.h> -+#include <linux/list.h> -+#include <linux/errno.h> -+#include <linux/err.h> -+#include <linux/string.h> -+#include <linux/clk.h> -+#include <linux/mutex.h> -+ -+#include <asm/clkdev.h> -+ -+#include "clock.h" -+ -+int clk_enable(struct clk *clk) -+{ -+ return 0; -+} -+EXPORT_SYMBOL(clk_enable); -+ -+void clk_disable(struct clk *clk) -+{ -+} -+EXPORT_SYMBOL(clk_disable); -+ -+unsigned long clk_get_rate(struct clk *clk) -+{ -+ return clk->rate; -+} -+EXPORT_SYMBOL(clk_get_rate); -+ -+long clk_round_rate(struct clk *clk, unsigned long rate) -+{ -+ return clk->rate; -+} -+EXPORT_SYMBOL(clk_round_rate); -+ -+int clk_set_rate(struct clk *clk, unsigned long rate) -+{ -+ return -EIO; -+} -+EXPORT_SYMBOL(clk_set_rate); ---- /dev/null -+++ b/arch/arm/mach-bcm2708/clock.h -@@ -0,0 +1,24 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/clock.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+struct module; -+ -+struct clk { -+ unsigned long rate; -+}; ---- /dev/null -+++ b/arch/arm/mach-bcm2708/dma.c -@@ -0,0 +1,399 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/dma.c -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/slab.h> -+#include <linux/device.h> -+#include <linux/platform_device.h> -+#include <linux/module.h> -+#include <linux/scatterlist.h> -+ -+#include <mach/dma.h> -+#include <mach/irqs.h> -+ -+/*****************************************************************************\ -+ * * -+ * Configuration * -+ * * -+\*****************************************************************************/ -+ -+#define CACHE_LINE_MASK 31 -+#define DRIVER_NAME BCM_DMAMAN_DRIVER_NAME -+#define DEFAULT_DMACHAN_BITMAP 0x10 /* channel 4 only */ -+ -+/* valid only for channels 0 - 14, 15 has its own base address */ -+#define BCM2708_DMA_CHAN(n) ((n)<<8) /* base address */ -+#define BCM2708_DMA_CHANIO(dma_base, n) \ -+ ((void __iomem *)((char *)(dma_base)+BCM2708_DMA_CHAN(n))) -+ -+ -+/*****************************************************************************\ -+ * * -+ * DMA Auxilliary Functions * -+ * * -+\*****************************************************************************/ -+ -+/* A DMA buffer on an arbitrary boundary may separate a cache line into a -+ section inside the DMA buffer and another section outside it. -+ Even if we flush DMA buffers from the cache there is always the chance that -+ during a DMA someone will access the part of a cache line that is outside -+ the DMA buffer - which will then bring in unwelcome data. -+ Without being able to dictate our own buffer pools we must insist that -+ DMA buffers consist of a whole number of cache lines. -+*/ -+ -+extern int -+bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len) -+{ -+ int i; -+ -+ for (i = 0; i < sg_len; i++) { -+ if (sg_ptr[i].offset & CACHE_LINE_MASK || -+ sg_ptr[i].length & CACHE_LINE_MASK) -+ return 0; -+ } -+ -+ return 1; -+} -+EXPORT_SYMBOL_GPL(bcm_sg_suitable_for_dma); -+ -+extern void -+bcm_dma_start(void __iomem *dma_chan_base, dma_addr_t control_block) -+{ -+ dsb(); /* ARM data synchronization (push) operation */ -+ -+ writel(control_block, dma_chan_base + BCM2708_DMA_ADDR); -+ writel(BCM2708_DMA_ACTIVE, dma_chan_base + BCM2708_DMA_CS); -+} -+ -+extern void bcm_dma_wait_idle(void __iomem *dma_chan_base) -+{ -+ dsb(); -+ -+ /* ugly busy wait only option for now */ -+ while (readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE) -+ cpu_relax(); -+} -+ -+EXPORT_SYMBOL_GPL(bcm_dma_start); -+ -+/* Complete an ongoing DMA (assuming its results are to be ignored) -+ Does nothing if there is no DMA in progress. -+ This routine waits for the current AXI transfer to complete before -+ terminating the current DMA. If the current transfer is hung on a DREQ used -+ by an uncooperative peripheral the AXI transfer may never complete. In this -+ case the routine times out and return a non-zero error code. -+ Use of this routine doesn't guarantee that the ongoing or aborted DMA -+ does not produce an interrupt. -+*/ -+extern int -+bcm_dma_abort(void __iomem *dma_chan_base) -+{ -+ unsigned long int cs; -+ int rc = 0; -+ -+ cs = readl(dma_chan_base + BCM2708_DMA_CS); -+ -+ if (BCM2708_DMA_ACTIVE & cs) { -+ long int timeout = 10000; -+ -+ /* write 0 to the active bit - pause the DMA */ -+ writel(0, dma_chan_base + BCM2708_DMA_CS); -+ -+ /* wait for any current AXI transfer to complete */ -+ while (0 != (cs & BCM2708_DMA_ISPAUSED) && --timeout >= 0) -+ cs = readl(dma_chan_base + BCM2708_DMA_CS); -+ -+ if (0 != (cs & BCM2708_DMA_ISPAUSED)) { -+ /* we'll un-pause when we set of our next DMA */ -+ rc = -ETIMEDOUT; -+ -+ } else if (BCM2708_DMA_ACTIVE & cs) { -+ /* terminate the control block chain */ -+ writel(0, dma_chan_base + BCM2708_DMA_NEXTCB); -+ -+ /* abort the whole DMA */ -+ writel(BCM2708_DMA_ABORT | BCM2708_DMA_ACTIVE, -+ dma_chan_base + BCM2708_DMA_CS); -+ } -+ } -+ -+ return rc; -+} -+EXPORT_SYMBOL_GPL(bcm_dma_abort); -+ -+ -+/***************************************************************************** \ -+ * * -+ * DMA Manager Device Methods * -+ * * -+\*****************************************************************************/ -+ -+struct vc_dmaman { -+ void __iomem *dma_base; -+ u32 chan_available; /* bitmap of available channels */ -+ u32 has_feature[BCM_DMA_FEATURE_COUNT]; /* bitmap of feature presence */ -+}; -+ -+static void vc_dmaman_init(struct vc_dmaman *dmaman, void __iomem *dma_base, -+ u32 chans_available) -+{ -+ dmaman->dma_base = dma_base; -+ dmaman->chan_available = chans_available; -+ dmaman->has_feature[BCM_DMA_FEATURE_FAST_ORD] = 0x0c; /* chans 2 & 3 */ -+ dmaman->has_feature[BCM_DMA_FEATURE_BULK_ORD] = 0x01; /* chan 0 */ -+} -+ -+static int vc_dmaman_chan_alloc(struct vc_dmaman *dmaman, -+ unsigned preferred_feature_set) -+{ -+ u32 chans; -+ int feature; -+ -+ chans = dmaman->chan_available; -+ for (feature = 0; feature < BCM_DMA_FEATURE_COUNT; feature++) -+ /* select the subset of available channels with the desired -+ feature so long as some of the candidate channels have that -+ feature */ -+ if ((preferred_feature_set & (1 << feature)) && -+ (chans & dmaman->has_feature[feature])) -+ chans &= dmaman->has_feature[feature]; -+ -+ if (chans) { -+ int chan = 0; -+ /* return the ordinal of the first channel in the bitmap */ -+ while (chans != 0 && (chans & 1) == 0) { -+ chans >>= 1; -+ chan++; -+ } -+ /* claim the channel */ -+ dmaman->chan_available &= ~(1 << chan); -+ return chan; -+ } else -+ return -ENOMEM; -+} -+ -+static int vc_dmaman_chan_free(struct vc_dmaman *dmaman, int chan) -+{ -+ if (chan < 0) -+ return -EINVAL; -+ else if ((1 << chan) & dmaman->chan_available) -+ return -EIDRM; -+ else { -+ dmaman->chan_available |= (1 << chan); -+ return 0; -+ } -+} -+ -+/*****************************************************************************\ -+ * * -+ * DMA IRQs * -+ * * -+\*****************************************************************************/ -+ -+static unsigned char bcm_dma_irqs[] = { -+ IRQ_DMA0, -+ IRQ_DMA1, -+ IRQ_DMA2, -+ IRQ_DMA3, -+ IRQ_DMA4, -+ IRQ_DMA5, -+ IRQ_DMA6, -+ IRQ_DMA7, -+ IRQ_DMA8, -+ IRQ_DMA9, -+ IRQ_DMA10, -+ IRQ_DMA11, -+ IRQ_DMA12 -+}; -+ -+ -+/***************************************************************************** \ -+ * * -+ * DMA Manager Monitor * -+ * * -+\*****************************************************************************/ -+ -+static struct device *dmaman_dev; /* we assume there's only one! */ -+ -+extern int bcm_dma_chan_alloc(unsigned preferred_feature_set, -+ void __iomem **out_dma_base, int *out_dma_irq) -+{ -+ if (!dmaman_dev) -+ return -ENODEV; -+ else { -+ struct vc_dmaman *dmaman = dev_get_drvdata(dmaman_dev); -+ int rc; -+ -+ device_lock(dmaman_dev); -+ rc = vc_dmaman_chan_alloc(dmaman, preferred_feature_set); -+ if (rc >= 0) { -+ *out_dma_base = BCM2708_DMA_CHANIO(dmaman->dma_base, -+ rc); -+ *out_dma_irq = bcm_dma_irqs[rc]; -+ } -+ device_unlock(dmaman_dev); -+ -+ return rc; -+ } -+} -+EXPORT_SYMBOL_GPL(bcm_dma_chan_alloc); -+ -+extern int bcm_dma_chan_free(int channel) -+{ -+ if (dmaman_dev) { -+ struct vc_dmaman *dmaman = dev_get_drvdata(dmaman_dev); -+ int rc; -+ -+ device_lock(dmaman_dev); -+ rc = vc_dmaman_chan_free(dmaman, channel); -+ device_unlock(dmaman_dev); -+ -+ return rc; -+ } else -+ return -ENODEV; -+} -+EXPORT_SYMBOL_GPL(bcm_dma_chan_free); -+ -+static int dev_dmaman_register(const char *dev_name, struct device *dev) -+{ -+ int rc = dmaman_dev ? -EINVAL : 0; -+ dmaman_dev = dev; -+ return rc; -+} -+ -+static void dev_dmaman_deregister(const char *dev_name, struct device *dev) -+{ -+ dmaman_dev = NULL; -+} -+ -+/*****************************************************************************\ -+ * * -+ * DMA Device * -+ * * -+\*****************************************************************************/ -+ -+static int dmachans = -1; /* module parameter */ -+ -+static int bcm_dmaman_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ struct vc_dmaman *dmaman; -+ struct resource *dma_res = NULL; -+ void __iomem *dma_base = NULL; -+ int have_dma_region = 0; -+ -+ dmaman = kzalloc(sizeof(*dmaman), GFP_KERNEL); -+ if (NULL == dmaman) { -+ printk(KERN_ERR DRIVER_NAME ": failed to allocate " -+ "DMA management memory\n"); -+ ret = -ENOMEM; -+ } else { -+ -+ dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (dma_res == NULL) { -+ printk(KERN_ERR DRIVER_NAME ": failed to obtain memory " -+ "resource\n"); -+ ret = -ENODEV; -+ } else if (!request_mem_region(dma_res->start, -+ resource_size(dma_res), -+ DRIVER_NAME)) { -+ dev_err(&pdev->dev, "cannot obtain DMA region\n"); -+ ret = -EBUSY; -+ } else { -+ have_dma_region = 1; -+ dma_base = ioremap(dma_res->start, -+ resource_size(dma_res)); -+ if (!dma_base) { -+ dev_err(&pdev->dev, "cannot map DMA region\n"); -+ ret = -ENOMEM; -+ } else { -+ /* use module parameter if one was provided */ -+ if (dmachans > 0) -+ vc_dmaman_init(dmaman, dma_base, -+ dmachans); -+ else -+ vc_dmaman_init(dmaman, dma_base, -+ DEFAULT_DMACHAN_BITMAP); -+ -+ platform_set_drvdata(pdev, dmaman); -+ dev_dmaman_register(DRIVER_NAME, &pdev->dev); -+ -+ printk(KERN_INFO DRIVER_NAME ": DMA manager " -+ "at %p\n", dma_base); -+ } -+ } -+ } -+ if (ret != 0) { -+ if (dma_base) -+ iounmap(dma_base); -+ if (dma_res && have_dma_region) -+ release_mem_region(dma_res->start, -+ resource_size(dma_res)); -+ if (dmaman) -+ kfree(dmaman); -+ } -+ return ret; -+} -+ -+static int bcm_dmaman_remove(struct platform_device *pdev) -+{ -+ struct vc_dmaman *dmaman = platform_get_drvdata(pdev); -+ -+ platform_set_drvdata(pdev, NULL); -+ dev_dmaman_deregister(DRIVER_NAME, &pdev->dev); -+ kfree(dmaman); -+ -+ return 0; -+} -+ -+static struct platform_driver bcm_dmaman_driver = { -+ .probe = bcm_dmaman_probe, -+ .remove = bcm_dmaman_remove, -+ -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+/*****************************************************************************\ -+ * * -+ * Driver init/exit * -+ * * -+\*****************************************************************************/ -+ -+static int __init bcm_dmaman_drv_init(void) -+{ -+ int ret; -+ -+ ret = platform_driver_register(&bcm_dmaman_driver); -+ if (ret != 0) { -+ printk(KERN_ERR DRIVER_NAME ": failed to register " -+ "on platform\n"); -+ } -+ -+ return ret; -+} -+ -+static void __exit bcm_dmaman_drv_exit(void) -+{ -+ platform_driver_unregister(&bcm_dmaman_driver); -+} -+ -+module_init(bcm_dmaman_drv_init); -+module_exit(bcm_dmaman_drv_exit); -+ -+module_param(dmachans, int, 0644); -+ -+MODULE_AUTHOR("Gray Girling <grayg@broadcom.com>"); -+MODULE_DESCRIPTION("DMA channel manager driver"); -+MODULE_LICENSE("GPL"); -+ -+MODULE_PARM_DESC(dmachans, "Bitmap of DMA channels available to the ARM"); ---- /dev/null -+++ b/arch/arm/mach-bcm2708/dmaer.c -@@ -0,0 +1,887 @@ -+#include <linux/init.h> -+#include <linux/sched.h> -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/kdev_t.h> -+#include <linux/fs.h> -+#include <linux/cdev.h> -+#include <linux/mm.h> -+#include <linux/slab.h> -+#include <linux/pagemap.h> -+#include <linux/device.h> -+#include <linux/jiffies.h> -+#include <linux/timex.h> -+#include <linux/dma-mapping.h> -+ -+#include <asm/uaccess.h> -+#include <asm/atomic.h> -+#include <asm/cacheflush.h> -+#include <asm/io.h> -+ -+#include <mach/dma.h> -+#include <mach/vc_support.h> -+ -+#ifdef ECLIPSE_IGNORE -+ -+#define __user -+#define __init -+#define __exit -+#define __iomem -+#define KERN_DEBUG -+#define KERN_ERR -+#define KERN_WARNING -+#define KERN_INFO -+#define _IOWR(a, b, c) b -+#define _IOW(a, b, c) b -+#define _IO(a, b) b -+ -+#endif -+ -+//#define inline -+ -+#define PRINTK(args...) printk(args) -+//#define PRINTK_VERBOSE(args...) printk(args) -+//#define PRINTK(args...) -+#define PRINTK_VERBOSE(args...) -+ -+/***** TYPES ****/ -+#define PAGES_PER_LIST 500 -+struct PageList -+{ -+ struct page *m_pPages[PAGES_PER_LIST]; -+ unsigned int m_used; -+ struct PageList *m_pNext; -+}; -+ -+struct VmaPageList -+{ -+ //each vma has a linked list of pages associated with it -+ struct PageList *m_pPageHead; -+ struct PageList *m_pPageTail; -+ unsigned int m_refCount; -+}; -+ -+struct DmaControlBlock -+{ -+ unsigned int m_transferInfo; -+ void __user *m_pSourceAddr; -+ void __user *m_pDestAddr; -+ unsigned int m_xferLen; -+ unsigned int m_tdStride; -+ struct DmaControlBlock *m_pNext; -+ unsigned int m_blank1, m_blank2; -+}; -+ -+/***** DEFINES ******/ -+//magic number defining the module -+#define DMA_MAGIC 0xdd -+ -+//do user virtual to physical translation of the CB chain -+#define DMA_PREPARE _IOWR(DMA_MAGIC, 0, struct DmaControlBlock *) -+ -+//kick the pre-prepared CB chain -+#define DMA_KICK _IOW(DMA_MAGIC, 1, struct DmaControlBlock *) -+ -+//prepare it, kick it, wait for it -+#define DMA_PREPARE_KICK_WAIT _IOWR(DMA_MAGIC, 2, struct DmaControlBlock *) -+ -+//prepare it, kick it, don't wait for it -+#define DMA_PREPARE_KICK _IOWR(DMA_MAGIC, 3, struct DmaControlBlock *) -+ -+//not currently implemented -+#define DMA_WAIT_ONE _IO(DMA_MAGIC, 4, struct DmaControlBlock *) -+ -+//wait on all kicked CB chains -+#define DMA_WAIT_ALL _IO(DMA_MAGIC, 5) -+ -+//in order to discover the largest AXI burst that should be programmed into the transfer params -+#define DMA_MAX_BURST _IO(DMA_MAGIC, 6) -+ -+//set the address range through which the user address is assumed to already by a physical address -+#define DMA_SET_MIN_PHYS _IOW(DMA_MAGIC, 7, unsigned long) -+#define DMA_SET_MAX_PHYS _IOW(DMA_MAGIC, 8, unsigned long) -+#define DMA_SET_PHYS_OFFSET _IOW(DMA_MAGIC, 9, unsigned long) -+ -+//used to define the size for the CMA-based allocation *in pages*, can only be done once once the file is opened -+#define DMA_CMA_SET_SIZE _IOW(DMA_MAGIC, 10, unsigned long) -+ -+//used to get the version of the module, to test for a capability -+#define DMA_GET_VERSION _IO(DMA_MAGIC, 99) -+ -+#define VERSION_NUMBER 1 -+ -+#define VIRT_TO_BUS_CACHE_SIZE 8 -+ -+/***** FILE OPS *****/ -+static int Open(struct inode *pInode, struct file *pFile); -+static int Release(struct inode *pInode, struct file *pFile); -+static long Ioctl(struct file *pFile, unsigned int cmd, unsigned long arg); -+static ssize_t Read(struct file *pFile, char __user *pUser, size_t count, loff_t *offp); -+static int Mmap(struct file *pFile, struct vm_area_struct *pVma); -+ -+/***** VMA OPS ****/ -+static void VmaOpen4k(struct vm_area_struct *pVma); -+static void VmaClose4k(struct vm_area_struct *pVma); -+static int VmaFault4k(struct vm_area_struct *pVma, struct vm_fault *pVmf); -+ -+/**** DMA PROTOTYPES */ -+static struct DmaControlBlock __user *DmaPrepare(struct DmaControlBlock __user *pUserCB, int *pError); -+static int DmaKick(struct DmaControlBlock __user *pUserCB); -+static void DmaWaitAll(void); -+ -+/**** GENERIC ****/ -+static int __init dmaer_init(void); -+static void __exit dmaer_exit(void); -+ -+/*** OPS ***/ -+static struct vm_operations_struct g_vmOps4k = { -+ .open = VmaOpen4k, -+ .close = VmaClose4k, -+ .fault = VmaFault4k, -+}; -+ -+static struct file_operations g_fOps = { -+ .owner = THIS_MODULE, -+ .llseek = 0, -+ .read = Read, -+ .write = 0, -+ .unlocked_ioctl = Ioctl, -+ .open = Open, -+ .release = Release, -+ .mmap = Mmap, -+}; -+ -+/***** GLOBALS ******/ -+static dev_t g_majorMinor; -+ -+//tracking usage of the two files -+static atomic_t g_oneLock4k = ATOMIC_INIT(1); -+ -+//device operations -+static struct cdev g_cDev; -+static int g_trackedPages = 0; -+ -+//dma control -+static unsigned int *g_pDmaChanBase; -+static int g_dmaIrq; -+static int g_dmaChan; -+ -+//cma allocation -+static int g_cmaHandle; -+ -+//user virtual to bus address translation acceleration -+static unsigned long g_virtAddr[VIRT_TO_BUS_CACHE_SIZE]; -+static unsigned long g_busAddr[VIRT_TO_BUS_CACHE_SIZE]; -+static unsigned long g_cbVirtAddr; -+static unsigned long g_cbBusAddr; -+static int g_cacheInsertAt; -+static int g_cacheHit, g_cacheMiss; -+ -+//off by default -+static void __user *g_pMinPhys; -+static void __user *g_pMaxPhys; -+static unsigned long g_physOffset; -+ -+/****** CACHE OPERATIONS ********/ -+static inline void FlushAddrCache(void) -+{ -+ int count = 0; -+ for (count = 0; count < VIRT_TO_BUS_CACHE_SIZE; count++) -+ g_virtAddr[count] = 0xffffffff; //never going to match as we always chop the bottom bits anyway -+ -+ g_cbVirtAddr = 0xffffffff; -+ -+ g_cacheInsertAt = 0; -+} -+ -+//translate from a user virtual address to a bus address by mapping the page -+//NB this won't lock a page in memory, so to avoid potential paging issues using kernel logical addresses -+static inline void __iomem *UserVirtualToBus(void __user *pUser) -+{ -+ int mapped; -+ struct page *pPage; -+ void *phys; -+ -+ //map it (requiring that the pointer points to something that does not hang off the page boundary) -+ mapped = get_user_pages(current, current->mm, -+ (unsigned long)pUser, 1, -+ 1, 0, -+ &pPage, -+ 0); -+ -+ if (mapped <= 0) //error -+ return 0; -+ -+ PRINTK_VERBOSE(KERN_DEBUG "user virtual %p arm phys %p bus %p\n", -+ pUser, page_address(pPage), (void __iomem *)__virt_to_bus(page_address(pPage))); -+ -+ //get the arm physical address -+ phys = page_address(pPage) + offset_in_page(pUser); -+ page_cache_release(pPage); -+ -+ //and now the bus address -+ return (void __iomem *)__virt_to_bus(phys); -+} -+ -+static inline void __iomem *UserVirtualToBusViaCbCache(void __user *pUser) -+{ -+ unsigned long virtual_page = (unsigned long)pUser & ~4095; -+ unsigned long page_offset = (unsigned long)pUser & 4095; -+ unsigned long bus_addr; -+ -+ if (g_cbVirtAddr == virtual_page) -+ { -+ bus_addr = g_cbBusAddr + page_offset; -+ g_cacheHit++; -+ return (void __iomem *)bus_addr; -+ } -+ else -+ { -+ bus_addr = (unsigned long)UserVirtualToBus(pUser); -+ -+ if (!bus_addr) -+ return 0; -+ -+ g_cbVirtAddr = virtual_page; -+ g_cbBusAddr = bus_addr & ~4095; -+ g_cacheMiss++; -+ -+ return (void __iomem *)bus_addr; -+ } -+} -+ -+//do the same as above, by query our virt->bus cache -+static inline void __iomem *UserVirtualToBusViaCache(void __user *pUser) -+{ -+ int count; -+ //get the page and its offset -+ unsigned long virtual_page = (unsigned long)pUser & ~4095; -+ unsigned long page_offset = (unsigned long)pUser & 4095; -+ unsigned long bus_addr; -+ -+ if (pUser >= g_pMinPhys && pUser < g_pMaxPhys) -+ { -+ PRINTK_VERBOSE(KERN_DEBUG "user->phys passthrough on %p\n", pUser); -+ return (void __iomem *)((unsigned long)pUser + g_physOffset); -+ } -+ -+ //check the cache for our entry -+ for (count = 0; count < VIRT_TO_BUS_CACHE_SIZE; count++) -+ if (g_virtAddr[count] == virtual_page) -+ { -+ bus_addr = g_busAddr[count] + page_offset; -+ g_cacheHit++; -+ return (void __iomem *)bus_addr; -+ } -+ -+ //not found, look up manually and then insert its page address -+ bus_addr = (unsigned long)UserVirtualToBus(pUser); -+ -+ if (!bus_addr) -+ return 0; -+ -+ g_virtAddr[g_cacheInsertAt] = virtual_page; -+ g_busAddr[g_cacheInsertAt] = bus_addr & ~4095; -+ -+ //round robin -+ g_cacheInsertAt++; -+ if (g_cacheInsertAt == VIRT_TO_BUS_CACHE_SIZE) -+ g_cacheInsertAt = 0; -+ -+ g_cacheMiss++; -+ -+ return (void __iomem *)bus_addr; -+} -+ -+/***** FILE OPERATIONS ****/ -+static int Open(struct inode *pInode, struct file *pFile) -+{ -+ PRINTK(KERN_DEBUG "file opening: %d/%d\n", imajor(pInode), iminor(pInode)); -+ -+ //check which device we are -+ if (iminor(pInode) == 0) //4k -+ { -+ //only one at a time -+ if (!atomic_dec_and_test(&g_oneLock4k)) -+ { -+ atomic_inc(&g_oneLock4k); -+ return -EBUSY; -+ } -+ } -+ else -+ return -EINVAL; -+ -+ //todo there will be trouble if two different processes open the files -+ -+ //reset after any file is opened -+ g_pMinPhys = (void __user *)-1; -+ g_pMaxPhys = (void __user *)0; -+ g_physOffset = 0; -+ g_cmaHandle = 0; -+ -+ return 0; -+} -+ -+static int Release(struct inode *pInode, struct file *pFile) -+{ -+ PRINTK(KERN_DEBUG "file closing, %d pages tracked\n", g_trackedPages); -+ if (g_trackedPages) -+ PRINTK(KERN_ERR "we\'re leaking memory!\n"); -+ -+ //wait for any dmas to finish -+ DmaWaitAll(); -+ -+ //free this memory on the application closing the file or it crashing (implicitly closing the file) -+ if (g_cmaHandle) -+ { -+ PRINTK(KERN_DEBUG "unlocking vc memory\n"); -+ if (UnlockVcMemory(g_cmaHandle)) -+ PRINTK(KERN_ERR "uh-oh, unable to unlock vc memory!\n"); -+ PRINTK(KERN_DEBUG "releasing vc memory\n"); -+ if (ReleaseVcMemory(g_cmaHandle)) -+ PRINTK(KERN_ERR "uh-oh, unable to release vc memory!\n"); -+ } -+ -+ if (iminor(pInode) == 0) -+ atomic_inc(&g_oneLock4k); -+ else -+ return -EINVAL; -+ -+ return 0; -+} -+ -+static struct DmaControlBlock __user *DmaPrepare(struct DmaControlBlock __user *pUserCB, int *pError) -+{ -+ struct DmaControlBlock kernCB; -+ struct DmaControlBlock __user *pUNext; -+ void __iomem *pSourceBus, __iomem *pDestBus; -+ -+ //get the control block into kernel memory so we can work on it -+ if (copy_from_user(&kernCB, pUserCB, sizeof(struct DmaControlBlock)) != 0) -+ { -+ PRINTK(KERN_ERR "copy_from_user failed for user cb %p\n", pUserCB); -+ *pError = 1; -+ return 0; -+ } -+ -+ if (kernCB.m_pSourceAddr == 0 || kernCB.m_pDestAddr == 0) -+ { -+ PRINTK(KERN_ERR "faulty source (%p) dest (%p) addresses for user cb %p\n", -+ kernCB.m_pSourceAddr, kernCB.m_pDestAddr, pUserCB); -+ *pError = 1; -+ return 0; -+ } -+ -+ pSourceBus = UserVirtualToBusViaCache(kernCB.m_pSourceAddr); -+ pDestBus = UserVirtualToBusViaCache(kernCB.m_pDestAddr); -+ -+ if (!pSourceBus || !pDestBus) -+ { -+ PRINTK(KERN_ERR "virtual to bus translation failure for source/dest %p/%p->%p/%p\n", -+ kernCB.m_pSourceAddr, kernCB.m_pDestAddr, -+ pSourceBus, pDestBus); -+ *pError = 1; -+ return 0; -+ } -+ -+ //update the user structure with the new bus addresses -+ kernCB.m_pSourceAddr = pSourceBus; -+ kernCB.m_pDestAddr = pDestBus; -+ -+ PRINTK_VERBOSE(KERN_DEBUG "final source %p dest %p\n", kernCB.m_pSourceAddr, kernCB.m_pDestAddr); -+ -+ //sort out the bus address for the next block -+ pUNext = kernCB.m_pNext; -+ -+ if (kernCB.m_pNext) -+ { -+ void __iomem *pNextBus; -+ pNextBus = UserVirtualToBusViaCbCache(kernCB.m_pNext); -+ -+ if (!pNextBus) -+ { -+ PRINTK(KERN_ERR "virtual to bus translation failure for m_pNext\n"); -+ *pError = 1; -+ return 0; -+ } -+ -+ //update the pointer with the bus address -+ kernCB.m_pNext = pNextBus; -+ } -+ -+ //write it back to user space -+ if (copy_to_user(pUserCB, &kernCB, sizeof(struct DmaControlBlock)) != 0) -+ { -+ PRINTK(KERN_ERR "copy_to_user failed for cb %p\n", pUserCB); -+ *pError = 1; -+ return 0; -+ } -+ -+ __cpuc_flush_dcache_area(pUserCB, 32); -+ -+ *pError = 0; -+ return pUNext; -+} -+ -+static int DmaKick(struct DmaControlBlock __user *pUserCB) -+{ -+ void __iomem *pBusCB; -+ -+ pBusCB = UserVirtualToBusViaCbCache(pUserCB); -+ if (!pBusCB) -+ { -+ PRINTK(KERN_ERR "virtual to bus translation failure for cb\n"); -+ return 1; -+ } -+ -+ //flush_cache_all(); -+ -+ bcm_dma_start(g_pDmaChanBase, (dma_addr_t)pBusCB); -+ -+ return 0; -+} -+ -+static void DmaWaitAll(void) -+{ -+ int counter = 0; -+ volatile int inner_count; -+ volatile unsigned int cs; -+ unsigned long time_before, time_after; -+ -+ time_before = jiffies; -+ //bcm_dma_wait_idle(g_pDmaChanBase); -+ dsb(); -+ -+ cs = readl(g_pDmaChanBase); -+ -+ while ((cs & 1) == 1) -+ { -+ cs = readl(g_pDmaChanBase); -+ counter++; -+ -+ for (inner_count = 0; inner_count < 32; inner_count++); -+ -+ asm volatile ("MCR p15,0,r0,c7,c0,4 \n"); -+ //cpu_do_idle(); -+ if (counter >= 1000000) -+ { -+ PRINTK(KERN_WARNING "DMA failed to finish in a timely fashion\n"); -+ break; -+ } -+ } -+ time_after = jiffies; -+ PRINTK_VERBOSE(KERN_DEBUG "done, counter %d, cs %08x", counter, cs); -+ PRINTK_VERBOSE(KERN_DEBUG "took %ld jiffies, %d HZ\n", time_after - time_before, HZ); -+} -+ -+static long Ioctl(struct file *pFile, unsigned int cmd, unsigned long arg) -+{ -+ int error = 0; -+ PRINTK_VERBOSE(KERN_DEBUG "ioctl cmd %x arg %lx\n", cmd, arg); -+ -+ switch (cmd) -+ { -+ case DMA_PREPARE: -+ case DMA_PREPARE_KICK: -+ case DMA_PREPARE_KICK_WAIT: -+ { -+ struct DmaControlBlock __user *pUCB = (struct DmaControlBlock *)arg; -+ int steps = 0; -+ unsigned long start_time = jiffies; -+ (void)start_time; -+ -+ //flush our address cache -+ FlushAddrCache(); -+ -+ PRINTK_VERBOSE(KERN_DEBUG "dma prepare\n"); -+ -+ //do virtual to bus translation for each entry -+ do -+ { -+ pUCB = DmaPrepare(pUCB, &error); -+ } while (error == 0 && ++steps && pUCB); -+ PRINTK_VERBOSE(KERN_DEBUG "prepare done in %d steps, %ld\n", steps, jiffies - start_time); -+ -+ //carry straight on if we want to kick too -+ if (cmd == DMA_PREPARE || error) -+ { -+ PRINTK_VERBOSE(KERN_DEBUG "falling out\n"); -+ return error ? -EINVAL : 0; -+ } -+ } -+ case DMA_KICK: -+ PRINTK_VERBOSE(KERN_DEBUG "dma begin\n"); -+ -+ if (cmd == DMA_KICK) -+ FlushAddrCache(); -+ -+ DmaKick((struct DmaControlBlock __user *)arg); -+ -+ if (cmd != DMA_PREPARE_KICK_WAIT) -+ break; -+/* case DMA_WAIT_ONE: -+ //PRINTK(KERN_DEBUG "dma wait one\n"); -+ break;*/ -+ case DMA_WAIT_ALL: -+ //PRINTK(KERN_DEBUG "dma wait all\n"); -+ DmaWaitAll(); -+ break; -+ case DMA_MAX_BURST: -+ if (g_dmaChan == 0) -+ return 10; -+ else -+ return 5; -+ case DMA_SET_MIN_PHYS: -+ g_pMinPhys = (void __user *)arg; -+ PRINTK(KERN_DEBUG "min/max user/phys bypass set to %p %p\n", g_pMinPhys, g_pMaxPhys); -+ break; -+ case DMA_SET_MAX_PHYS: -+ g_pMaxPhys = (void __user *)arg; -+ PRINTK(KERN_DEBUG "min/max user/phys bypass set to %p %p\n", g_pMinPhys, g_pMaxPhys); -+ break; -+ case DMA_SET_PHYS_OFFSET: -+ g_physOffset = arg; -+ PRINTK(KERN_DEBUG "user/phys bypass offset set to %ld\n", g_physOffset); -+ break; -+ case DMA_CMA_SET_SIZE: -+ { -+ unsigned int pBusAddr; -+ -+ if (g_cmaHandle) -+ { -+ PRINTK(KERN_ERR "memory has already been allocated (handle %d)\n", g_cmaHandle); -+ return -EINVAL; -+ } -+ -+ PRINTK(KERN_INFO "allocating %ld bytes of VC memory\n", arg * 4096); -+ -+ //get the memory -+ if (AllocateVcMemory(&g_cmaHandle, arg * 4096, 4096, MEM_FLAG_L1_NONALLOCATING | MEM_FLAG_NO_INIT | MEM_FLAG_HINT_PERMALOCK)) -+ { -+ PRINTK(KERN_ERR "failed to allocate %ld bytes of VC memory\n", arg * 4096); -+ g_cmaHandle = 0; -+ return -EINVAL; -+ } -+ -+ //get an address for it -+ PRINTK(KERN_INFO "trying to map VC memory\n"); -+ -+ if (LockVcMemory(&pBusAddr, g_cmaHandle)) -+ { -+ PRINTK(KERN_ERR "failed to map CMA handle %d, releasing memory\n", g_cmaHandle); -+ ReleaseVcMemory(g_cmaHandle); -+ g_cmaHandle = 0; -+ } -+ -+ PRINTK(KERN_INFO "bus address for CMA memory is %x\n", pBusAddr); -+ return pBusAddr; -+ } -+ case DMA_GET_VERSION: -+ PRINTK(KERN_DEBUG "returning version number, %d\n", VERSION_NUMBER); -+ return VERSION_NUMBER; -+ default: -+ PRINTK(KERN_DEBUG "unknown ioctl: %d\n", cmd); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static ssize_t Read(struct file *pFile, char __user *pUser, size_t count, loff_t *offp) -+{ -+ return -EIO; -+} -+ -+static int Mmap(struct file *pFile, struct vm_area_struct *pVma) -+{ -+ struct PageList *pPages; -+ struct VmaPageList *pVmaList; -+ -+ PRINTK_VERBOSE(KERN_DEBUG "MMAP vma %p, length %ld (%s %d)\n", -+ pVma, pVma->vm_end - pVma->vm_start, -+ current->comm, current->pid); -+ PRINTK_VERBOSE(KERN_DEBUG "MMAP %p %d (tracked %d)\n", pVma, current->pid, g_trackedPages); -+ -+ //make a new page list -+ pPages = (struct PageList *)kmalloc(sizeof(struct PageList), GFP_KERNEL); -+ if (!pPages) -+ { -+ PRINTK(KERN_ERR "couldn\'t allocate a new page list (%s %d)\n", -+ current->comm, current->pid); -+ return -ENOMEM; -+ } -+ -+ //clear the page list -+ pPages->m_used = 0; -+ pPages->m_pNext = 0; -+ -+ //insert our vma and new page list somewhere -+ if (!pVma->vm_private_data) -+ { -+ struct VmaPageList *pList; -+ -+ PRINTK_VERBOSE(KERN_DEBUG "new vma list, making new one (%s %d)\n", -+ current->comm, current->pid); -+ -+ //make a new vma list -+ pList = (struct VmaPageList *)kmalloc(sizeof(struct VmaPageList), GFP_KERNEL); -+ if (!pList) -+ { -+ PRINTK(KERN_ERR "couldn\'t allocate vma page list (%s %d)\n", -+ current->comm, current->pid); -+ kfree(pPages); -+ return -ENOMEM; -+ } -+ -+ //clear this list -+ pVma->vm_private_data = (void *)pList; -+ pList->m_refCount = 0; -+ } -+ -+ pVmaList = (struct VmaPageList *)pVma->vm_private_data; -+ -+ //add it to the vma list -+ pVmaList->m_pPageHead = pPages; -+ pVmaList->m_pPageTail = pPages; -+ -+ pVma->vm_ops = &g_vmOps4k; -+ pVma->vm_flags |= VM_IO; -+ -+ VmaOpen4k(pVma); -+ -+ return 0; -+} -+ -+/****** VMA OPERATIONS ******/ -+ -+static void VmaOpen4k(struct vm_area_struct *pVma) -+{ -+ struct VmaPageList *pVmaList; -+ -+ PRINTK_VERBOSE(KERN_DEBUG "vma open %p private %p (%s %d), %d live pages\n", pVma, pVma->vm_private_data, current->comm, current->pid, g_trackedPages); -+ PRINTK_VERBOSE(KERN_DEBUG "OPEN %p %d %ld pages (tracked pages %d)\n", -+ pVma, current->pid, (pVma->vm_end - pVma->vm_start) >> 12, -+ g_trackedPages); -+ -+ pVmaList = (struct VmaPageList *)pVma->vm_private_data; -+ -+ if (pVmaList) -+ { -+ pVmaList->m_refCount++; -+ PRINTK_VERBOSE(KERN_DEBUG "ref count is now %d\n", pVmaList->m_refCount); -+ } -+ else -+ { -+ PRINTK_VERBOSE(KERN_DEBUG "err, open but no vma page list\n"); -+ } -+} -+ -+static void VmaClose4k(struct vm_area_struct *pVma) -+{ -+ struct VmaPageList *pVmaList; -+ int freed = 0; -+ -+ PRINTK_VERBOSE(KERN_DEBUG "vma close %p private %p (%s %d)\n", pVma, pVma->vm_private_data, current->comm, current->pid); -+ -+ //wait for any dmas to finish -+ DmaWaitAll(); -+ -+ //find our vma in the list -+ pVmaList = (struct VmaPageList *)pVma->vm_private_data; -+ -+ //may be a fork -+ if (pVmaList) -+ { -+ struct PageList *pPages; -+ -+ pVmaList->m_refCount--; -+ -+ if (pVmaList->m_refCount == 0) -+ { -+ PRINTK_VERBOSE(KERN_DEBUG "found vma, freeing pages (%s %d)\n", -+ current->comm, current->pid); -+ -+ pPages = pVmaList->m_pPageHead; -+ -+ if (!pPages) -+ { -+ PRINTK(KERN_ERR "no page list (%s %d)!\n", -+ current->comm, current->pid); -+ return; -+ } -+ -+ while (pPages) -+ { -+ struct PageList *next; -+ int count; -+ -+ PRINTK_VERBOSE(KERN_DEBUG "page list (%s %d)\n", -+ current->comm, current->pid); -+ -+ next = pPages->m_pNext; -+ for (count = 0; count < pPages->m_used; count++) -+ { -+ PRINTK_VERBOSE(KERN_DEBUG "freeing page %p (%s %d)\n", -+ pPages->m_pPages[count], -+ current->comm, current->pid); -+ __free_pages(pPages->m_pPages[count], 0); -+ g_trackedPages--; -+ freed++; -+ } -+ -+ PRINTK_VERBOSE(KERN_DEBUG "freeing page list (%s %d)\n", -+ current->comm, current->pid); -+ kfree(pPages); -+ pPages = next; -+ } -+ -+ //remove our vma from the list -+ kfree(pVmaList); -+ pVma->vm_private_data = 0; -+ } -+ else -+ { -+ PRINTK_VERBOSE(KERN_DEBUG "ref count is %d, not closing\n", pVmaList->m_refCount); -+ } -+ } -+ else -+ { -+ PRINTK_VERBOSE(KERN_ERR "uh-oh, vma %p not found (%s %d)!\n", pVma, current->comm, current->pid); -+ PRINTK_VERBOSE(KERN_ERR "CLOSE ERR\n"); -+ } -+ -+ PRINTK_VERBOSE(KERN_DEBUG "CLOSE %p %d %d pages (tracked pages %d)", -+ pVma, current->pid, freed, g_trackedPages); -+ -+ PRINTK_VERBOSE(KERN_DEBUG "%d pages open\n", g_trackedPages); -+} -+ -+static int VmaFault4k(struct vm_area_struct *pVma, struct vm_fault *pVmf) -+{ -+ PRINTK_VERBOSE(KERN_DEBUG "vma fault for vma %p private %p at offset %ld (%s %d)\n", pVma, pVma->vm_private_data, pVmf->pgoff, -+ current->comm, current->pid); -+ PRINTK_VERBOSE(KERN_DEBUG "FAULT\n"); -+ pVmf->page = alloc_page(GFP_KERNEL); -+ -+ if (pVmf->page) -+ { -+ PRINTK_VERBOSE(KERN_DEBUG "alloc page virtual %p\n", page_address(pVmf->page)); -+ } -+ -+ if (!pVmf->page) -+ { -+ PRINTK(KERN_ERR "vma fault oom (%s %d)\n", current->comm, current->pid); -+ return VM_FAULT_OOM; -+ } -+ else -+ { -+ struct VmaPageList *pVmaList; -+ -+ get_page(pVmf->page); -+ g_trackedPages++; -+ -+ //find our vma in the list -+ pVmaList = (struct VmaPageList *)pVma->vm_private_data; -+ -+ if (pVmaList) -+ { -+ PRINTK_VERBOSE(KERN_DEBUG "vma found (%s %d)\n", current->comm, current->pid); -+ -+ if (pVmaList->m_pPageTail->m_used == PAGES_PER_LIST) -+ { -+ PRINTK_VERBOSE(KERN_DEBUG "making new page list (%s %d)\n", current->comm, current->pid); -+ //making a new page list -+ pVmaList->m_pPageTail->m_pNext = (struct PageList *)kmalloc(sizeof(struct PageList), GFP_KERNEL); -+ if (!pVmaList->m_pPageTail->m_pNext) -+ return -ENOMEM; -+ -+ //update the tail pointer -+ pVmaList->m_pPageTail = pVmaList->m_pPageTail->m_pNext; -+ pVmaList->m_pPageTail->m_used = 0; -+ pVmaList->m_pPageTail->m_pNext = 0; -+ } -+ -+ PRINTK_VERBOSE(KERN_DEBUG "adding page to list (%s %d)\n", current->comm, current->pid); -+ -+ pVmaList->m_pPageTail->m_pPages[pVmaList->m_pPageTail->m_used] = pVmf->page; -+ pVmaList->m_pPageTail->m_used++; -+ } -+ else -+ PRINTK(KERN_ERR "returned page for vma we don\'t know %p (%s %d)\n", pVma, current->comm, current->pid); -+ -+ return 0; -+ } -+} -+ -+/****** GENERIC FUNCTIONS ******/ -+static int __init dmaer_init(void) -+{ -+ int result = alloc_chrdev_region(&g_majorMinor, 0, 1, "dmaer"); -+ if (result < 0) -+ { -+ PRINTK(KERN_ERR "unable to get major device number\n"); -+ return result; -+ } -+ else -+ PRINTK(KERN_DEBUG "major device number %d\n", MAJOR(g_majorMinor)); -+ -+ PRINTK(KERN_DEBUG "vma list size %d, page list size %d, page size %ld\n", -+ sizeof(struct VmaPageList), sizeof(struct PageList), PAGE_SIZE); -+ -+ //get a dma channel to work with -+ result = bcm_dma_chan_alloc(BCM_DMA_FEATURE_FAST, (void **)&g_pDmaChanBase, &g_dmaIrq); -+ -+ //uncomment to force to channel 0 -+ //result = 0; -+ //g_pDmaChanBase = 0xce808000; -+ -+ if (result < 0) -+ { -+ PRINTK(KERN_ERR "failed to allocate dma channel\n"); -+ cdev_del(&g_cDev); -+ unregister_chrdev_region(g_majorMinor, 1); -+ } -+ -+ //reset the channel -+ PRINTK(KERN_DEBUG "allocated dma channel %d (%p), initial state %08x\n", result, g_pDmaChanBase, *g_pDmaChanBase); -+ *g_pDmaChanBase = 1 << 31; -+ PRINTK(KERN_DEBUG "post-reset %08x\n", *g_pDmaChanBase); -+ -+ g_dmaChan = result; -+ -+ //clear the cache stats -+ g_cacheHit = 0; -+ g_cacheMiss = 0; -+ -+ //register our device - after this we are go go go -+ cdev_init(&g_cDev, &g_fOps); -+ g_cDev.owner = THIS_MODULE; -+ g_cDev.ops = &g_fOps; -+ -+ result = cdev_add(&g_cDev, g_majorMinor, 1); -+ if (result < 0) -+ { -+ PRINTK(KERN_ERR "failed to add character device\n"); -+ unregister_chrdev_region(g_majorMinor, 1); -+ bcm_dma_chan_free(g_dmaChan); -+ return result; -+ } -+ -+ return 0; -+} -+ -+static void __exit dmaer_exit(void) -+{ -+ PRINTK(KERN_INFO "closing dmaer device, cache stats: %d hits %d misses\n", g_cacheHit, g_cacheMiss); -+ //unregister the device -+ cdev_del(&g_cDev); -+ unregister_chrdev_region(g_majorMinor, 1); -+ //free the dma channel -+ bcm_dma_chan_free(g_dmaChan); -+} -+ -+MODULE_LICENSE("Dual BSD/GPL"); -+MODULE_AUTHOR("Simon Hall"); -+module_init(dmaer_init); -+module_exit(dmaer_exit); -+ ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/arm_control.h -@@ -0,0 +1,419 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/arm_control.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef __BCM2708_ARM_CONTROL_H -+#define __BCM2708_ARM_CONTROL_H -+ -+/* -+ * Definitions and addresses for the ARM CONTROL logic -+ * This file is manually generated. -+ */ -+ -+#define ARM_BASE 0x7E00B000 -+ -+/* Basic configuration */ -+#define ARM_CONTROL0 HW_REGISTER_RW(ARM_BASE+0x000) -+#define ARM_C0_SIZ128M 0x00000000 -+#define ARM_C0_SIZ256M 0x00000001 -+#define ARM_C0_SIZ512M 0x00000002 -+#define ARM_C0_SIZ1G 0x00000003 -+#define ARM_C0_BRESP0 0x00000000 -+#define ARM_C0_BRESP1 0x00000004 -+#define ARM_C0_BRESP2 0x00000008 -+#define ARM_C0_BOOTHI 0x00000010 -+#define ARM_C0_UNUSED05 0x00000020 /* free */ -+#define ARM_C0_FULLPERI 0x00000040 -+#define ARM_C0_UNUSED78 0x00000180 /* free */ -+#define ARM_C0_JTAGMASK 0x00000E00 -+#define ARM_C0_JTAGOFF 0x00000000 -+#define ARM_C0_JTAGBASH 0x00000800 /* Debug on GPIO off */ -+#define ARM_C0_JTAGGPIO 0x00000C00 /* Debug on GPIO on */ -+#define ARM_C0_APROTMSK 0x0000F000 -+#define ARM_C0_DBG0SYNC 0x00010000 /* VPU0 halt sync */ -+#define ARM_C0_DBG1SYNC 0x00020000 /* VPU1 halt sync */ -+#define ARM_C0_SWDBGREQ 0x00040000 /* HW debug request */ -+#define ARM_C0_PASSHALT 0x00080000 /* ARM halt passed to debugger */ -+#define ARM_C0_PRIO_PER 0x00F00000 /* per priority mask */ -+#define ARM_C0_PRIO_L2 0x0F000000 -+#define ARM_C0_PRIO_UC 0xF0000000 -+ -+#define ARM_C0_APROTPASS 0x0000A000 /* Translate 1:1 */ -+#define ARM_C0_APROTUSER 0x00000000 /* Only user mode */ -+#define ARM_C0_APROTSYST 0x0000F000 /* Only system mode */ -+ -+ -+#define ARM_CONTROL1 HW_REGISTER_RW(ARM_BASE+0x440) -+#define ARM_C1_TIMER 0x00000001 /* re-route timer IRQ to VC */ -+#define ARM_C1_MAIL 0x00000002 /* re-route Mail IRQ to VC */ -+#define ARM_C1_BELL0 0x00000004 /* re-route Doorbell 0 to VC */ -+#define ARM_C1_BELL1 0x00000008 /* re-route Doorbell 1 to VC */ -+#define ARM_C1_PERSON 0x00000100 /* peripherals on */ -+#define ARM_C1_REQSTOP 0x00000200 /* ASYNC bridge request stop */ -+ -+#define ARM_STATUS HW_REGISTER_RW(ARM_BASE+0x444) -+#define ARM_S_ACKSTOP 0x80000000 /* Bridge stopped */ -+#define ARM_S_READPEND 0x000003FF /* pending reads counter */ -+#define ARM_S_WRITPEND 0x000FFC00 /* pending writes counter */ -+ -+#define ARM_ERRHALT HW_REGISTER_RW(ARM_BASE+0x448) -+#define ARM_EH_PERIBURST 0x00000001 /* Burst write seen on peri bus */ -+#define ARM_EH_ILLADDRS1 0x00000002 /* Address bits 25-27 error */ -+#define ARM_EH_ILLADDRS2 0x00000004 /* Address bits 31-28 error */ -+#define ARM_EH_VPU0HALT 0x00000008 /* VPU0 halted & in debug mode */ -+#define ARM_EH_VPU1HALT 0x00000010 /* VPU1 halted & in debug mode */ -+#define ARM_EH_ARMHALT 0x00000020 /* ARM in halted debug mode */ -+ -+#define ARM_ID_SECURE HW_REGISTER_RW(ARM_BASE+0x00C) -+#define ARM_ID HW_REGISTER_RW(ARM_BASE+0x44C) -+#define ARM_IDVAL 0x364D5241 -+ -+/* Translation memory */ -+#define ARM_TRANSLATE HW_REGISTER_RW(ARM_BASE+0x100) -+/* 32 locations: 0x100.. 0x17F */ -+/* 32 spare means we CAN go to 64 pages.... */ -+ -+ -+/* Interrupts */ -+#define ARM_IRQ_PEND0 HW_REGISTER_RW(ARM_BASE+0x200) /* Top IRQ bits */ -+#define ARM_I0_TIMER 0x00000001 /* timer IRQ */ -+#define ARM_I0_MAIL 0x00000002 /* Mail IRQ */ -+#define ARM_I0_BELL0 0x00000004 /* Doorbell 0 */ -+#define ARM_I0_BELL1 0x00000008 /* Doorbell 1 */ -+#define ARM_I0_BANK1 0x00000100 /* Bank1 IRQ */ -+#define ARM_I0_BANK2 0x00000200 /* Bank2 IRQ */ -+ -+#define ARM_IRQ_PEND1 HW_REGISTER_RW(ARM_BASE+0x204) /* All bank1 IRQ bits */ -+/* todo: all I1_interrupt sources */ -+#define ARM_IRQ_PEND2 HW_REGISTER_RW(ARM_BASE+0x208) /* All bank2 IRQ bits */ -+/* todo: all I2_interrupt sources */ -+ -+#define ARM_IRQ_FAST HW_REGISTER_RW(ARM_BASE+0x20C) /* FIQ control */ -+#define ARM_IF_INDEX 0x0000007F /* FIQ select */ -+#define ARM_IF_ENABLE 0x00000080 /* FIQ enable */ -+#define ARM_IF_VCMASK 0x0000003F /* FIQ = (index from VC source) */ -+#define ARM_IF_TIMER 0x00000040 /* FIQ = ARM timer */ -+#define ARM_IF_MAIL 0x00000041 /* FIQ = ARM Mail */ -+#define ARM_IF_BELL0 0x00000042 /* FIQ = ARM Doorbell 0 */ -+#define ARM_IF_BELL1 0x00000043 /* FIQ = ARM Doorbell 1 */ -+#define ARM_IF_VP0HALT 0x00000044 /* FIQ = VPU0 Halt seen */ -+#define ARM_IF_VP1HALT 0x00000045 /* FIQ = VPU1 Halt seen */ -+#define ARM_IF_ILLEGAL 0x00000046 /* FIQ = Illegal access seen */ -+ -+#define ARM_IRQ_ENBL1 HW_REGISTER_RW(ARM_BASE+0x210) /* Bank1 enable bits */ -+#define ARM_IRQ_ENBL2 HW_REGISTER_RW(ARM_BASE+0x214) /* Bank2 enable bits */ -+#define ARM_IRQ_ENBL3 HW_REGISTER_RW(ARM_BASE+0x218) /* ARM irqs enable bits */ -+#define ARM_IRQ_DIBL1 HW_REGISTER_RW(ARM_BASE+0x21C) /* Bank1 disable bits */ -+#define ARM_IRQ_DIBL2 HW_REGISTER_RW(ARM_BASE+0x220) /* Bank2 disable bits */ -+#define ARM_IRQ_DIBL3 HW_REGISTER_RW(ARM_BASE+0x224) /* ARM irqs disable bits */ -+#define ARM_IE_TIMER 0x00000001 /* Timer IRQ */ -+#define ARM_IE_MAIL 0x00000002 /* Mail IRQ */ -+#define ARM_IE_BELL0 0x00000004 /* Doorbell 0 */ -+#define ARM_IE_BELL1 0x00000008 /* Doorbell 1 */ -+#define ARM_IE_VP0HALT 0x00000010 /* VPU0 Halt */ -+#define ARM_IE_VP1HALT 0x00000020 /* VPU1 Halt */ -+#define ARM_IE_ILLEGAL 0x00000040 /* Illegal access seen */ -+ -+/* Timer */ -+/* For reg. fields see sp804 spec. */ -+#define ARM_T_LOAD HW_REGISTER_RW(ARM_BASE+0x400) -+#define ARM_T_VALUE HW_REGISTER_RW(ARM_BASE+0x404) -+#define ARM_T_CONTROL HW_REGISTER_RW(ARM_BASE+0x408) -+#define ARM_T_IRQCNTL HW_REGISTER_RW(ARM_BASE+0x40C) -+#define ARM_T_RAWIRQ HW_REGISTER_RW(ARM_BASE+0x410) -+#define ARM_T_MSKIRQ HW_REGISTER_RW(ARM_BASE+0x414) -+#define ARM_T_RELOAD HW_REGISTER_RW(ARM_BASE+0x418) -+#define ARM_T_PREDIV HW_REGISTER_RW(ARM_BASE+0x41c) -+#define ARM_T_FREECNT HW_REGISTER_RW(ARM_BASE+0x420) -+ -+#define TIMER_CTRL_ONESHOT (1 << 0) -+#define TIMER_CTRL_32BIT (1 << 1) -+#define TIMER_CTRL_DIV1 (0 << 2) -+#define TIMER_CTRL_DIV16 (1 << 2) -+#define TIMER_CTRL_DIV256 (2 << 2) -+#define TIMER_CTRL_IE (1 << 5) -+#define TIMER_CTRL_PERIODIC (1 << 6) -+#define TIMER_CTRL_ENABLE (1 << 7) -+#define TIMER_CTRL_DBGHALT (1 << 8) -+#define TIMER_CTRL_ENAFREE (1 << 9) -+#define TIMER_CTRL_FREEDIV_SHIFT 16) -+#define TIMER_CTRL_FREEDIV_MASK 0xff -+ -+/* Semaphores, Doorbells, Mailboxes */ -+#define ARM_SBM_OWN0 (ARM_BASE+0x800) -+#define ARM_SBM_OWN1 (ARM_BASE+0x900) -+#define ARM_SBM_OWN2 (ARM_BASE+0xA00) -+#define ARM_SBM_OWN3 (ARM_BASE+0xB00) -+ -+/* MAILBOXES -+ * Register flags are common across all -+ * owner registers. See end of this section -+ * -+ * Semaphores, Doorbells, Mailboxes Owner 0 -+ * -+ */ -+ -+#define ARM_0_SEMS HW_REGISTER_RW(ARM_SBM_OWN0+0x00) -+#define ARM_0_SEM0 HW_REGISTER_RW(ARM_SBM_OWN0+0x00) -+#define ARM_0_SEM1 HW_REGISTER_RW(ARM_SBM_OWN0+0x04) -+#define ARM_0_SEM2 HW_REGISTER_RW(ARM_SBM_OWN0+0x08) -+#define ARM_0_SEM3 HW_REGISTER_RW(ARM_SBM_OWN0+0x0C) -+#define ARM_0_SEM4 HW_REGISTER_RW(ARM_SBM_OWN0+0x10) -+#define ARM_0_SEM5 HW_REGISTER_RW(ARM_SBM_OWN0+0x14) -+#define ARM_0_SEM6 HW_REGISTER_RW(ARM_SBM_OWN0+0x18) -+#define ARM_0_SEM7 HW_REGISTER_RW(ARM_SBM_OWN0+0x1C) -+#define ARM_0_BELL0 HW_REGISTER_RW(ARM_SBM_OWN0+0x40) -+#define ARM_0_BELL1 HW_REGISTER_RW(ARM_SBM_OWN0+0x44) -+#define ARM_0_BELL2 HW_REGISTER_RW(ARM_SBM_OWN0+0x48) -+#define ARM_0_BELL3 HW_REGISTER_RW(ARM_SBM_OWN0+0x4C) -+/* MAILBOX 0 access in Owner 0 area */ -+/* Some addresses should ONLY be used by owner 0 */ -+#define ARM_0_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN0+0x80) /* .. 0x8C (4 locations) */ -+#define ARM_0_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN0+0x80) /* .. 0x8C (4 locations) Normal read */ -+#define ARM_0_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN0+0x90) /* none-pop read */ -+#define ARM_0_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN0+0x94) /* Sender read (only LS 2 bits) */ -+#define ARM_0_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN0+0x98) /* Status read */ -+#define ARM_0_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN0+0x9C) /* Config read/write */ -+/* MAILBOX 1 access in Owner 0 area */ -+/* Owner 0 should only WRITE to this mailbox */ -+#define ARM_0_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) /* .. 0xAC (4 locations) */ -+/*#define ARM_0_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_0_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN0+0xB0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_0_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN0+0xB4) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_0_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN0+0xB8) /* Status read */ -+/*#define ARM_0_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN0+0xBC) */ /* DO NOT USE THIS !!!!! */ -+/* General SEM, BELL, MAIL config/status */ -+#define ARM_0_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN0+0xE0) /* semaphore clear/debug register */ -+#define ARM_0_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN0+0xE4) /* Doorbells clear/debug register */ -+#define ARM_0_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN0+0xF8) /* ALL interrupts */ -+#define ARM_0_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN0+0xFC) /* IRQS pending for owner 0 */ -+ -+/* Semaphores, Doorbells, Mailboxes Owner 1 */ -+#define ARM_1_SEMS HW_REGISTER_RW(ARM_SBM_OWN1+0x00) -+#define ARM_1_SEM0 HW_REGISTER_RW(ARM_SBM_OWN1+0x00) -+#define ARM_1_SEM1 HW_REGISTER_RW(ARM_SBM_OWN1+0x04) -+#define ARM_1_SEM2 HW_REGISTER_RW(ARM_SBM_OWN1+0x08) -+#define ARM_1_SEM3 HW_REGISTER_RW(ARM_SBM_OWN1+0x0C) -+#define ARM_1_SEM4 HW_REGISTER_RW(ARM_SBM_OWN1+0x10) -+#define ARM_1_SEM5 HW_REGISTER_RW(ARM_SBM_OWN1+0x14) -+#define ARM_1_SEM6 HW_REGISTER_RW(ARM_SBM_OWN1+0x18) -+#define ARM_1_SEM7 HW_REGISTER_RW(ARM_SBM_OWN1+0x1C) -+#define ARM_1_BELL0 HW_REGISTER_RW(ARM_SBM_OWN1+0x40) -+#define ARM_1_BELL1 HW_REGISTER_RW(ARM_SBM_OWN1+0x44) -+#define ARM_1_BELL2 HW_REGISTER_RW(ARM_SBM_OWN1+0x48) -+#define ARM_1_BELL3 HW_REGISTER_RW(ARM_SBM_OWN1+0x4C) -+/* MAILBOX 0 access in Owner 0 area */ -+/* Owner 1 should only WRITE to this mailbox */ -+#define ARM_1_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN1+0x80) /* .. 0x8C (4 locations) */ -+/*#define ARM_1_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN1+0x80) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_1_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN1+0x90) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_1_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN1+0x94) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_1_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN1+0x98) /* Status read */ -+/*#define ARM_1_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0x9C) */ /* DO NOT USE THIS !!!!! */ -+/* MAILBOX 1 access in Owner 0 area */ -+#define ARM_1_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN1+0xA0) /* .. 0xAC (4 locations) */ -+#define ARM_1_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN1+0xA0) /* .. 0xAC (4 locations) Normal read */ -+#define ARM_1_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN1+0xB0) /* none-pop read */ -+#define ARM_1_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN1+0xB4) /* Sender read (only LS 2 bits) */ -+#define ARM_1_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN1+0xB8) /* Status read */ -+#define ARM_1_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0xBC) -+/* General SEM, BELL, MAIL config/status */ -+#define ARM_1_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN1+0xE0) /* semaphore clear/debug register */ -+#define ARM_1_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN1+0xE4) /* Doorbells clear/debug register */ -+#define ARM_1_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN1+0xFC) /* IRQS pending for owner 1 */ -+#define ARM_1_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN1+0xF8) /* ALL interrupts */ -+ -+/* Semaphores, Doorbells, Mailboxes Owner 2 */ -+#define ARM_2_SEMS HW_REGISTER_RW(ARM_SBM_OWN2+0x00) -+#define ARM_2_SEM0 HW_REGISTER_RW(ARM_SBM_OWN2+0x00) -+#define ARM_2_SEM1 HW_REGISTER_RW(ARM_SBM_OWN2+0x04) -+#define ARM_2_SEM2 HW_REGISTER_RW(ARM_SBM_OWN2+0x08) -+#define ARM_2_SEM3 HW_REGISTER_RW(ARM_SBM_OWN2+0x0C) -+#define ARM_2_SEM4 HW_REGISTER_RW(ARM_SBM_OWN2+0x10) -+#define ARM_2_SEM5 HW_REGISTER_RW(ARM_SBM_OWN2+0x14) -+#define ARM_2_SEM6 HW_REGISTER_RW(ARM_SBM_OWN2+0x18) -+#define ARM_2_SEM7 HW_REGISTER_RW(ARM_SBM_OWN2+0x1C) -+#define ARM_2_BELL0 HW_REGISTER_RW(ARM_SBM_OWN2+0x40) -+#define ARM_2_BELL1 HW_REGISTER_RW(ARM_SBM_OWN2+0x44) -+#define ARM_2_BELL2 HW_REGISTER_RW(ARM_SBM_OWN2+0x48) -+#define ARM_2_BELL3 HW_REGISTER_RW(ARM_SBM_OWN2+0x4C) -+/* MAILBOX 0 access in Owner 2 area */ -+/* Owner 2 should only WRITE to this mailbox */ -+#define ARM_2_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN2+0x80) /* .. 0x8C (4 locations) */ -+/*#define ARM_2_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN2+0x80) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_2_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN2+0x90) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_2_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN2+0x94) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_2_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN2+0x98) /* Status read */ -+/*#define ARM_2_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0x9C) */ /* DO NOT USE THIS !!!!! */ -+/* MAILBOX 1 access in Owner 2 area */ -+/* Owner 2 should only WRITE to this mailbox */ -+#define ARM_2_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) /* .. 0xAC (4 locations) */ -+/*#define ARM_2_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_2_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN2+0xB0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_2_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN2+0xB4) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_2_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN2+0xB8) /* Status read */ -+/*#define ARM_2_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0xBC) */ /* DO NOT USE THIS !!!!! */ -+/* General SEM, BELL, MAIL config/status */ -+#define ARM_2_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN2+0xE0) /* semaphore clear/debug register */ -+#define ARM_2_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN2+0xE4) /* Doorbells clear/debug register */ -+#define ARM_2_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN2+0xFC) /* IRQS pending for owner 2 */ -+#define ARM_2_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN2+0xF8) /* ALL interrupts */ -+ -+/* Semaphores, Doorbells, Mailboxes Owner 3 */ -+#define ARM_3_SEMS HW_REGISTER_RW(ARM_SBM_OWN3+0x00) -+#define ARM_3_SEM0 HW_REGISTER_RW(ARM_SBM_OWN3+0x00) -+#define ARM_3_SEM1 HW_REGISTER_RW(ARM_SBM_OWN3+0x04) -+#define ARM_3_SEM2 HW_REGISTER_RW(ARM_SBM_OWN3+0x08) -+#define ARM_3_SEM3 HW_REGISTER_RW(ARM_SBM_OWN3+0x0C) -+#define ARM_3_SEM4 HW_REGISTER_RW(ARM_SBM_OWN3+0x10) -+#define ARM_3_SEM5 HW_REGISTER_RW(ARM_SBM_OWN3+0x14) -+#define ARM_3_SEM6 HW_REGISTER_RW(ARM_SBM_OWN3+0x18) -+#define ARM_3_SEM7 HW_REGISTER_RW(ARM_SBM_OWN3+0x1C) -+#define ARM_3_BELL0 HW_REGISTER_RW(ARM_SBM_OWN3+0x40) -+#define ARM_3_BELL1 HW_REGISTER_RW(ARM_SBM_OWN3+0x44) -+#define ARM_3_BELL2 HW_REGISTER_RW(ARM_SBM_OWN3+0x48) -+#define ARM_3_BELL3 HW_REGISTER_RW(ARM_SBM_OWN3+0x4C) -+/* MAILBOX 0 access in Owner 3 area */ -+/* Owner 3 should only WRITE to this mailbox */ -+#define ARM_3_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN3+0x80) /* .. 0x8C (4 locations) */ -+/*#define ARM_3_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN3+0x80) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_3_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN3+0x90) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_3_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN3+0x94) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_3_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN3+0x98) /* Status read */ -+/*#define ARM_3_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0x9C) */ /* DO NOT USE THIS !!!!! */ -+/* MAILBOX 1 access in Owner 3 area */ -+/* Owner 3 should only WRITE to this mailbox */ -+#define ARM_3_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) /* .. 0xAC (4 locations) */ -+/*#define ARM_3_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_3_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN3+0xB0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_3_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN3+0xB4) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_3_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN3+0xB8) /* Status read */ -+/*#define ARM_3_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0xBC) */ /* DO NOT USE THIS !!!!! */ -+/* General SEM, BELL, MAIL config/status */ -+#define ARM_3_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN3+0xE0) /* semaphore clear/debug register */ -+#define ARM_3_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN3+0xE4) /* Doorbells clear/debug register */ -+#define ARM_3_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN3+0xFC) /* IRQS pending for owner 3 */ -+#define ARM_3_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN3+0xF8) /* ALL interrupts */ -+ -+ -+ -+/* Mailbox flags. Valid for all owners */ -+ -+/* Mailbox status register (...0x98) */ -+#define ARM_MS_FULL 0x80000000 -+#define ARM_MS_EMPTY 0x40000000 -+#define ARM_MS_LEVEL 0x400000FF /* Max. value depdnds on mailbox depth parameter */ -+ -+/* MAILBOX config/status register (...0x9C) */ -+/* ANY write to this register clears the error bits! */ -+#define ARM_MC_IHAVEDATAIRQEN 0x00000001 /* mailbox irq enable: has data */ -+#define ARM_MC_IHAVESPACEIRQEN 0x00000002 /* mailbox irq enable: has space */ -+#define ARM_MC_OPPISEMPTYIRQEN 0x00000004 /* mailbox irq enable: Opp. is empty */ -+#define ARM_MC_MAIL_CLEAR 0x00000008 /* mailbox clear write 1, then 0 */ -+#define ARM_MC_IHAVEDATAIRQPEND 0x00000010 /* mailbox irq pending: has space */ -+#define ARM_MC_IHAVESPACEIRQPEND 0x00000020 /* mailbox irq pending: Opp. is empty */ -+#define ARM_MC_OPPISEMPTYIRQPEND 0x00000040 /* mailbox irq pending */ -+/* Bit 7 is unused */ -+#define ARM_MC_ERRNOOWN 0x00000100 /* error : none owner read from mailbox */ -+#define ARM_MC_ERROVERFLW 0x00000200 /* error : write to fill mailbox */ -+#define ARM_MC_ERRUNDRFLW 0x00000400 /* error : read from empty mailbox */ -+ -+/* Semaphore clear/debug register (...0xE0) */ -+#define ARM_SD_OWN0 0x00000003 /* Owner of sem 0 */ -+#define ARM_SD_OWN1 0x0000000C /* Owner of sem 1 */ -+#define ARM_SD_OWN2 0x00000030 /* Owner of sem 2 */ -+#define ARM_SD_OWN3 0x000000C0 /* Owner of sem 3 */ -+#define ARM_SD_OWN4 0x00000300 /* Owner of sem 4 */ -+#define ARM_SD_OWN5 0x00000C00 /* Owner of sem 5 */ -+#define ARM_SD_OWN6 0x00003000 /* Owner of sem 6 */ -+#define ARM_SD_OWN7 0x0000C000 /* Owner of sem 7 */ -+#define ARM_SD_SEM0 0x00010000 /* Status of sem 0 */ -+#define ARM_SD_SEM1 0x00020000 /* Status of sem 1 */ -+#define ARM_SD_SEM2 0x00040000 /* Status of sem 2 */ -+#define ARM_SD_SEM3 0x00080000 /* Status of sem 3 */ -+#define ARM_SD_SEM4 0x00100000 /* Status of sem 4 */ -+#define ARM_SD_SEM5 0x00200000 /* Status of sem 5 */ -+#define ARM_SD_SEM6 0x00400000 /* Status of sem 6 */ -+#define ARM_SD_SEM7 0x00800000 /* Status of sem 7 */ -+ -+/* Doorbells clear/debug register (...0xE4) */ -+#define ARM_BD_OWN0 0x00000003 /* Owner of doorbell 0 */ -+#define ARM_BD_OWN1 0x0000000C /* Owner of doorbell 1 */ -+#define ARM_BD_OWN2 0x00000030 /* Owner of doorbell 2 */ -+#define ARM_BD_OWN3 0x000000C0 /* Owner of doorbell 3 */ -+#define ARM_BD_BELL0 0x00000100 /* Status of doorbell 0 */ -+#define ARM_BD_BELL1 0x00000200 /* Status of doorbell 1 */ -+#define ARM_BD_BELL2 0x00000400 /* Status of doorbell 2 */ -+#define ARM_BD_BELL3 0x00000800 /* Status of doorbell 3 */ -+ -+/* MY IRQS register (...0xF8) */ -+#define ARM_MYIRQ_BELL 0x00000001 /* This owner has a doorbell IRQ */ -+#define ARM_MYIRQ_MAIL 0x00000002 /* This owner has a mailbox IRQ */ -+ -+/* ALL IRQS register (...0xF8) */ -+#define ARM_AIS_BELL0 0x00000001 /* Doorbell 0 IRQ pending */ -+#define ARM_AIS_BELL1 0x00000002 /* Doorbell 1 IRQ pending */ -+#define ARM_AIS_BELL2 0x00000004 /* Doorbell 2 IRQ pending */ -+#define ARM_AIS_BELL3 0x00000008 /* Doorbell 3 IRQ pending */ -+#define ARM_AIS0_HAVEDATA 0x00000010 /* MAIL 0 has data IRQ pending */ -+#define ARM_AIS0_HAVESPAC 0x00000020 /* MAIL 0 has space IRQ pending */ -+#define ARM_AIS0_OPPEMPTY 0x00000040 /* MAIL 0 opposite is empty IRQ */ -+#define ARM_AIS1_HAVEDATA 0x00000080 /* MAIL 1 has data IRQ pending */ -+#define ARM_AIS1_HAVESPAC 0x00000100 /* MAIL 1 has space IRQ pending */ -+#define ARM_AIS1_OPPEMPTY 0x00000200 /* MAIL 1 opposite is empty IRQ */ -+/* Note that bell-0, bell-1 and MAIL0 IRQ go only to the ARM */ -+/* Whilst that bell-2, bell-3 and MAIL1 IRQ go only to the VC */ -+/* */ -+/* ARM JTAG BASH */ -+/* */ -+#define AJB_BASE 0x7e2000c0 -+ -+#define AJBCONF HW_REGISTER_RW(AJB_BASE+0x00) -+#define AJB_BITS0 0x000000 -+#define AJB_BITS4 0x000004 -+#define AJB_BITS8 0x000008 -+#define AJB_BITS12 0x00000C -+#define AJB_BITS16 0x000010 -+#define AJB_BITS20 0x000014 -+#define AJB_BITS24 0x000018 -+#define AJB_BITS28 0x00001C -+#define AJB_BITS32 0x000020 -+#define AJB_BITS34 0x000022 -+#define AJB_OUT_MS 0x000040 -+#define AJB_OUT_LS 0x000000 -+#define AJB_INV_CLK 0x000080 -+#define AJB_D0_RISE 0x000100 -+#define AJB_D0_FALL 0x000000 -+#define AJB_D1_RISE 0x000200 -+#define AJB_D1_FALL 0x000000 -+#define AJB_IN_RISE 0x000400 -+#define AJB_IN_FALL 0x000000 -+#define AJB_ENABLE 0x000800 -+#define AJB_HOLD0 0x000000 -+#define AJB_HOLD1 0x001000 -+#define AJB_HOLD2 0x002000 -+#define AJB_HOLD3 0x003000 -+#define AJB_RESETN 0x004000 -+#define AJB_CLKSHFT 16 -+#define AJB_BUSY 0x80000000 -+#define AJBTMS HW_REGISTER_RW(AJB_BASE+0x04) -+#define AJBTDI HW_REGISTER_RW(AJB_BASE+0x08) -+#define AJBTDO HW_REGISTER_RW(AJB_BASE+0x0c) -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/arm_power.h -@@ -0,0 +1,60 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/include/mach/arm_power.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef _ARM_POWER_H -+#define _ARM_POWER_H -+ -+/* Use meaningful names on each side */ -+#ifdef __VIDEOCORE__ -+#define PREFIX(x) ARM_##x -+#else -+#define PREFIX(x) BCM_##x -+#endif -+ -+enum { -+ PREFIX(POWER_SDCARD_BIT), -+ PREFIX(POWER_UART_BIT), -+ PREFIX(POWER_MINIUART_BIT), -+ PREFIX(POWER_USB_BIT), -+ PREFIX(POWER_I2C0_BIT), -+ PREFIX(POWER_I2C1_BIT), -+ PREFIX(POWER_I2C2_BIT), -+ PREFIX(POWER_SPI_BIT), -+ PREFIX(POWER_CCP2TX_BIT), -+ -+ PREFIX(POWER_MAX) -+}; -+ -+enum { -+ PREFIX(POWER_SDCARD) = (1 << PREFIX(POWER_SDCARD_BIT)), -+ PREFIX(POWER_UART) = (1 << PREFIX(POWER_UART_BIT)), -+ PREFIX(POWER_MINIUART) = (1 << PREFIX(POWER_MINIUART_BIT)), -+ PREFIX(POWER_USB) = (1 << PREFIX(POWER_USB_BIT)), -+ PREFIX(POWER_I2C0) = (1 << PREFIX(POWER_I2C0_BIT)), -+ PREFIX(POWER_I2C1_MASK) = (1 << PREFIX(POWER_I2C1_BIT)), -+ PREFIX(POWER_I2C2_MASK) = (1 << PREFIX(POWER_I2C2_BIT)), -+ PREFIX(POWER_SPI_MASK) = (1 << PREFIX(POWER_SPI_BIT)), -+ PREFIX(POWER_CCP2TX_MASK) = (1 << PREFIX(POWER_CCP2TX_BIT)), -+ -+ PREFIX(POWER_MASK) = (1 << PREFIX(POWER_MAX)) - 1, -+ PREFIX(POWER_NONE) = 0 -+}; -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/clkdev.h -@@ -0,0 +1,7 @@ -+#ifndef __ASM_MACH_CLKDEV_H -+#define __ASM_MACH_CLKDEV_H -+ -+#define __clk_get(clk) ({ 1; }) -+#define __clk_put(clk) do { } while (0) -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/debug-macro.S -@@ -0,0 +1,22 @@ -+/* arch/arm/mach-bcm2708/include/mach/debug-macro.S -+ * -+ * Debugging macro include header -+ * -+ * Copyright (C) 2010 Broadcom -+ * Copyright (C) 1994-1999 Russell King -+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+*/ -+ -+#include <mach/platform.h> -+ -+ .macro addruart, rp, rv, tmp -+ ldr \rp, =UART0_BASE -+ ldr \rv, =IO_ADDRESS(UART0_BASE) -+ .endm -+ -+#include <asm/hardware/debug-pl01x.S> ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/dma.h -@@ -0,0 +1,86 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/include/mach/dma.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+ -+#ifndef _MACH_BCM2708_DMA_H -+#define _MACH_BCM2708_DMA_H -+ -+#define BCM_DMAMAN_DRIVER_NAME "bcm2708_dma" -+ -+/* DMA CS Control and Status bits */ -+#define BCM2708_DMA_ACTIVE (1 << 0) -+#define BCM2708_DMA_INT (1 << 2) -+#define BCM2708_DMA_ISPAUSED (1 << 4) /* Pause requested or not active */ -+#define BCM2708_DMA_ISHELD (1 << 5) /* Is held by DREQ flow control */ -+#define BCM2708_DMA_ERR (1 << 8) -+#define BCM2708_DMA_ABORT (1 << 30) /* stop current CB, go to next, WO */ -+#define BCM2708_DMA_RESET (1 << 31) /* WO, self clearing */ -+ -+/* DMA control block "info" field bits */ -+#define BCM2708_DMA_INT_EN (1 << 0) -+#define BCM2708_DMA_TDMODE (1 << 1) -+#define BCM2708_DMA_WAIT_RESP (1 << 3) -+#define BCM2708_DMA_D_INC (1 << 4) -+#define BCM2708_DMA_D_WIDTH (1 << 5) -+#define BCM2708_DMA_D_DREQ (1 << 6) -+#define BCM2708_DMA_S_INC (1 << 8) -+#define BCM2708_DMA_S_WIDTH (1 << 9) -+#define BCM2708_DMA_S_DREQ (1 << 10) -+ -+#define BCM2708_DMA_BURST(x) (((x)&0xf) << 12) -+#define BCM2708_DMA_PER_MAP(x) ((x) << 16) -+#define BCM2708_DMA_WAITS(x) (((x)&0x1f) << 21) -+ -+#define BCM2708_DMA_DREQ_EMMC 11 -+#define BCM2708_DMA_DREQ_SDHOST 13 -+ -+#define BCM2708_DMA_CS 0x00 /* Control and Status */ -+#define BCM2708_DMA_ADDR 0x04 -+/* the current control block appears in the following registers - read only */ -+#define BCM2708_DMA_INFO 0x08 -+#define BCM2708_DMA_NEXTCB 0x1C -+#define BCM2708_DMA_DEBUG 0x20 -+ -+#define BCM2708_DMA4_CS (BCM2708_DMA_CHAN(4)+BCM2708_DMA_CS) -+#define BCM2708_DMA4_ADDR (BCM2708_DMA_CHAN(4)+BCM2708_DMA_ADDR) -+ -+#define BCM2708_DMA_TDMODE_LEN(w, h) ((h) << 16 | (w)) -+ -+struct bcm2708_dma_cb { -+ unsigned long info; -+ unsigned long src; -+ unsigned long dst; -+ unsigned long length; -+ unsigned long stride; -+ unsigned long next; -+ unsigned long pad[2]; -+}; -+ -+extern int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len); -+extern void bcm_dma_start(void __iomem *dma_chan_base, -+ dma_addr_t control_block); -+extern void bcm_dma_wait_idle(void __iomem *dma_chan_base); -+extern int /*rc*/ bcm_dma_abort(void __iomem *dma_chan_base); -+ -+/* When listing features we can ask for when allocating DMA channels give -+ those with higher priority smaller ordinal numbers */ -+#define BCM_DMA_FEATURE_FAST_ORD 0 -+#define BCM_DMA_FEATURE_BULK_ORD 1 -+#define BCM_DMA_FEATURE_FAST (1<<BCM_DMA_FEATURE_FAST_ORD) -+#define BCM_DMA_FEATURE_BULK (1<<BCM_DMA_FEATURE_BULK_ORD) -+#define BCM_DMA_FEATURE_COUNT 2 -+ -+/* return channel no or -ve error */ -+extern int bcm_dma_chan_alloc(unsigned preferred_feature_set, -+ void __iomem **out_dma_base, int *out_dma_irq); -+extern int bcm_dma_chan_free(int channel); -+ -+ -+#endif /* _MACH_BCM2708_DMA_H */ ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/entry-macro.S -@@ -0,0 +1,69 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/entry-macro.S -+ * -+ * Low-level IRQ helper macros for BCM2708 platforms -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include <mach/hardware.h> -+ -+ .macro disable_fiq -+ .endm -+ -+ .macro get_irqnr_preamble, base, tmp -+ ldr \base, =IO_ADDRESS(ARMCTRL_IC_BASE) -+ .endm -+ -+ .macro arch_ret_to_user, tmp1, tmp2 -+ .endm -+ -+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -+ /* get masked status */ -+ ldr \irqstat, [\base, #(ARM_IRQ_PEND0 - ARMCTRL_IC_BASE)] -+ mov \irqnr, #(ARM_IRQ0_BASE + 31) -+ and \tmp, \irqstat, #0x300 @ save bits 8 and 9 -+ /* clear bits 8 and 9, and test */ -+ bics \irqstat, \irqstat, #0x300 -+ bne 1010f -+ -+ tst \tmp, #0x100 -+ ldrne \irqstat, [\base, #(ARM_IRQ_PEND1 - ARMCTRL_IC_BASE)] -+ movne \irqnr, #(ARM_IRQ1_BASE + 31) -+ @ Mask out the interrupts also present in PEND0 - see SW-5809 -+ bicne \irqstat, #((1<<7) | (1<<9) | (1<<10)) -+ bicne \irqstat, #((1<<18) | (1<<19)) -+ bne 1010f -+ -+ tst \tmp, #0x200 -+ ldrne \irqstat, [\base, #(ARM_IRQ_PEND2 - ARMCTRL_IC_BASE)] -+ movne \irqnr, #(ARM_IRQ2_BASE + 31) -+ @ Mask out the interrupts also present in PEND0 - see SW-5809 -+ bicne \irqstat, #((1<<21) | (1<<22) | (1<<23) | (1<<24) | (1<<25)) -+ bicne \irqstat, #((1<<30)) -+ beq 1020f -+ -+1010: -+ @ For non-zero x, LSB(x) = 31 - CLZ(x^(x-1)) -+ @ N.B. CLZ is an ARM5 instruction. -+ sub \tmp, \irqstat, #1 -+ eor \irqstat, \irqstat, \tmp -+ clz \tmp, \irqstat -+ sub \irqnr, \tmp -+ -+1020: @ EQ will be set if no irqs pending -+ -+ .endm ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/frc.h -@@ -0,0 +1,38 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/timex.h -+ * -+ * BCM2708 free running counter (timer) -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef _MACH_FRC_H -+#define _MACH_FRC_H -+ -+#define FRC_TICK_RATE (1000000) -+ -+/*! Free running counter incrementing at the CLOCK_TICK_RATE -+ (slightly faster than frc_clock_ticks63() -+ */ -+extern unsigned long frc_clock_ticks32(void); -+ -+/*! Free running counter incrementing at the CLOCK_TICK_RATE -+ * Note - top bit should be ignored (see cnt32_to_63) -+ */ -+extern unsigned long long frc_clock_ticks63(void); -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/gpio.h -@@ -0,0 +1,18 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/gpio.h -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#ifndef __ASM_ARCH_GPIO_H -+#define __ASM_ARCH_GPIO_H -+ -+#define ARCH_NR_GPIOS 54 // number of gpio lines -+ -+#define gpio_to_irq(x) ((x) + GPIO_IRQ_START) -+#define irq_to_gpio(x) ((x) - GPIO_IRQ_START) -+ -+#endif -+ ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/hardware.h -@@ -0,0 +1,28 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/hardware.h -+ * -+ * This file contains the hardware definitions of the BCM2708 devices. -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_HARDWARE_H -+#define __ASM_ARCH_HARDWARE_H -+ -+#include <asm/sizes.h> -+#include <mach/platform.h> -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/io.h -@@ -0,0 +1,27 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/io.h -+ * -+ * Copyright (C) 2003 ARM Limited -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARM_ARCH_IO_H -+#define __ASM_ARM_ARCH_IO_H -+ -+#define IO_SPACE_LIMIT 0xffffffff -+ -+#define __io(a) __typesafe_io(a) -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/irqs.h -@@ -0,0 +1,199 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/irqs.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * Copyright (C) 2003 ARM Limited -+ * Copyright (C) 2000 Deep Blue Solutions Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef _BCM2708_IRQS_H_ -+#define _BCM2708_IRQS_H_ -+ -+#include <mach/platform.h> -+ -+/* -+ * IRQ interrupts definitions are the same as the INT definitions -+ * held within platform.h -+ */ -+#define IRQ_ARMCTRL_START 0 -+#define IRQ_TIMER0 (IRQ_ARMCTRL_START + INTERRUPT_TIMER0) -+#define IRQ_TIMER1 (IRQ_ARMCTRL_START + INTERRUPT_TIMER1) -+#define IRQ_TIMER2 (IRQ_ARMCTRL_START + INTERRUPT_TIMER2) -+#define IRQ_TIMER3 (IRQ_ARMCTRL_START + INTERRUPT_TIMER3) -+#define IRQ_CODEC0 (IRQ_ARMCTRL_START + INTERRUPT_CODEC0) -+#define IRQ_CODEC1 (IRQ_ARMCTRL_START + INTERRUPT_CODEC1) -+#define IRQ_CODEC2 (IRQ_ARMCTRL_START + INTERRUPT_CODEC2) -+#define IRQ_JPEG (IRQ_ARMCTRL_START + INTERRUPT_JPEG) -+#define IRQ_ISP (IRQ_ARMCTRL_START + INTERRUPT_ISP) -+#define IRQ_USB (IRQ_ARMCTRL_START + INTERRUPT_USB) -+#define IRQ_3D (IRQ_ARMCTRL_START + INTERRUPT_3D) -+#define IRQ_TRANSPOSER (IRQ_ARMCTRL_START + INTERRUPT_TRANSPOSER) -+#define IRQ_MULTICORESYNC0 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC0) -+#define IRQ_MULTICORESYNC1 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC1) -+#define IRQ_MULTICORESYNC2 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC2) -+#define IRQ_MULTICORESYNC3 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC3) -+#define IRQ_DMA0 (IRQ_ARMCTRL_START + INTERRUPT_DMA0) -+#define IRQ_DMA1 (IRQ_ARMCTRL_START + INTERRUPT_DMA1) -+#define IRQ_DMA2 (IRQ_ARMCTRL_START + INTERRUPT_DMA2) -+#define IRQ_DMA3 (IRQ_ARMCTRL_START + INTERRUPT_DMA3) -+#define IRQ_DMA4 (IRQ_ARMCTRL_START + INTERRUPT_DMA4) -+#define IRQ_DMA5 (IRQ_ARMCTRL_START + INTERRUPT_DMA5) -+#define IRQ_DMA6 (IRQ_ARMCTRL_START + INTERRUPT_DMA6) -+#define IRQ_DMA7 (IRQ_ARMCTRL_START + INTERRUPT_DMA7) -+#define IRQ_DMA8 (IRQ_ARMCTRL_START + INTERRUPT_DMA8) -+#define IRQ_DMA9 (IRQ_ARMCTRL_START + INTERRUPT_DMA9) -+#define IRQ_DMA10 (IRQ_ARMCTRL_START + INTERRUPT_DMA10) -+#define IRQ_DMA11 (IRQ_ARMCTRL_START + INTERRUPT_DMA11) -+#define IRQ_DMA12 (IRQ_ARMCTRL_START + INTERRUPT_DMA12) -+#define IRQ_AUX (IRQ_ARMCTRL_START + INTERRUPT_AUX) -+#define IRQ_ARM (IRQ_ARMCTRL_START + INTERRUPT_ARM) -+#define IRQ_VPUDMA (IRQ_ARMCTRL_START + INTERRUPT_VPUDMA) -+#define IRQ_HOSTPORT (IRQ_ARMCTRL_START + INTERRUPT_HOSTPORT) -+#define IRQ_VIDEOSCALER (IRQ_ARMCTRL_START + INTERRUPT_VIDEOSCALER) -+#define IRQ_CCP2TX (IRQ_ARMCTRL_START + INTERRUPT_CCP2TX) -+#define IRQ_SDC (IRQ_ARMCTRL_START + INTERRUPT_SDC) -+#define IRQ_DSI0 (IRQ_ARMCTRL_START + INTERRUPT_DSI0) -+#define IRQ_AVE (IRQ_ARMCTRL_START + INTERRUPT_AVE) -+#define IRQ_CAM0 (IRQ_ARMCTRL_START + INTERRUPT_CAM0) -+#define IRQ_CAM1 (IRQ_ARMCTRL_START + INTERRUPT_CAM1) -+#define IRQ_HDMI0 (IRQ_ARMCTRL_START + INTERRUPT_HDMI0) -+#define IRQ_HDMI1 (IRQ_ARMCTRL_START + INTERRUPT_HDMI1) -+#define IRQ_PIXELVALVE1 (IRQ_ARMCTRL_START + INTERRUPT_PIXELVALVE1) -+#define IRQ_I2CSPISLV (IRQ_ARMCTRL_START + INTERRUPT_I2CSPISLV) -+#define IRQ_DSI1 (IRQ_ARMCTRL_START + INTERRUPT_DSI1) -+#define IRQ_PWA0 (IRQ_ARMCTRL_START + INTERRUPT_PWA0) -+#define IRQ_PWA1 (IRQ_ARMCTRL_START + INTERRUPT_PWA1) -+#define IRQ_CPR (IRQ_ARMCTRL_START + INTERRUPT_CPR) -+#define IRQ_SMI (IRQ_ARMCTRL_START + INTERRUPT_SMI) -+#define IRQ_GPIO0 (IRQ_ARMCTRL_START + INTERRUPT_GPIO0) -+#define IRQ_GPIO1 (IRQ_ARMCTRL_START + INTERRUPT_GPIO1) -+#define IRQ_GPIO2 (IRQ_ARMCTRL_START + INTERRUPT_GPIO2) -+#define IRQ_GPIO3 (IRQ_ARMCTRL_START + INTERRUPT_GPIO3) -+#define IRQ_I2C (IRQ_ARMCTRL_START + INTERRUPT_I2C) -+#define IRQ_SPI (IRQ_ARMCTRL_START + INTERRUPT_SPI) -+#define IRQ_I2SPCM (IRQ_ARMCTRL_START + INTERRUPT_I2SPCM) -+#define IRQ_SDIO (IRQ_ARMCTRL_START + INTERRUPT_SDIO) -+#define IRQ_UART (IRQ_ARMCTRL_START + INTERRUPT_UART) -+#define IRQ_SLIMBUS (IRQ_ARMCTRL_START + INTERRUPT_SLIMBUS) -+#define IRQ_VEC (IRQ_ARMCTRL_START + INTERRUPT_VEC) -+#define IRQ_CPG (IRQ_ARMCTRL_START + INTERRUPT_CPG) -+#define IRQ_RNG (IRQ_ARMCTRL_START + INTERRUPT_RNG) -+#define IRQ_ARASANSDIO (IRQ_ARMCTRL_START + INTERRUPT_ARASANSDIO) -+#define IRQ_AVSPMON (IRQ_ARMCTRL_START + INTERRUPT_AVSPMON) -+ -+#define IRQ_ARM_TIMER (IRQ_ARMCTRL_START + INTERRUPT_ARM_TIMER) -+#define IRQ_ARM_MAILBOX (IRQ_ARMCTRL_START + INTERRUPT_ARM_MAILBOX) -+#define IRQ_ARM_DOORBELL_0 (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_0) -+#define IRQ_ARM_DOORBELL_1 (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_1) -+#define IRQ_VPU0_HALTED (IRQ_ARMCTRL_START + INTERRUPT_VPU0_HALTED) -+#define IRQ_VPU1_HALTED (IRQ_ARMCTRL_START + INTERRUPT_VPU1_HALTED) -+#define IRQ_ILLEGAL_TYPE0 (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE0) -+#define IRQ_ILLEGAL_TYPE1 (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE1) -+#define IRQ_PENDING1 (IRQ_ARMCTRL_START + INTERRUPT_PENDING1) -+#define IRQ_PENDING2 (IRQ_ARMCTRL_START + INTERRUPT_PENDING2) -+ -+#define FIQ_START HARD_IRQS -+ -+/* -+ * FIQ interrupts definitions are the same as the INT definitions. -+ */ -+#define FIQ_TIMER0 (FIQ_START+INTERRUPT_TIMER0) -+#define FIQ_TIMER1 (FIQ_START+INTERRUPT_TIMER1) -+#define FIQ_TIMER2 (FIQ_START+INTERRUPT_TIMER2) -+#define FIQ_TIMER3 (FIQ_START+INTERRUPT_TIMER3) -+#define FIQ_CODEC0 (FIQ_START+INTERRUPT_CODEC0) -+#define FIQ_CODEC1 (FIQ_START+INTERRUPT_CODEC1) -+#define FIQ_CODEC2 (FIQ_START+INTERRUPT_CODEC2) -+#define FIQ_JPEG (FIQ_START+INTERRUPT_JPEG) -+#define FIQ_ISP (FIQ_START+INTERRUPT_ISP) -+#define FIQ_USB (FIQ_START+INTERRUPT_USB) -+#define FIQ_3D (FIQ_START+INTERRUPT_3D) -+#define FIQ_TRANSPOSER (FIQ_START+INTERRUPT_TRANSPOSER) -+#define FIQ_MULTICORESYNC0 (FIQ_START+INTERRUPT_MULTICORESYNC0) -+#define FIQ_MULTICORESYNC1 (FIQ_START+INTERRUPT_MULTICORESYNC1) -+#define FIQ_MULTICORESYNC2 (FIQ_START+INTERRUPT_MULTICORESYNC2) -+#define FIQ_MULTICORESYNC3 (FIQ_START+INTERRUPT_MULTICORESYNC3) -+#define FIQ_DMA0 (FIQ_START+INTERRUPT_DMA0) -+#define FIQ_DMA1 (FIQ_START+INTERRUPT_DMA1) -+#define FIQ_DMA2 (FIQ_START+INTERRUPT_DMA2) -+#define FIQ_DMA3 (FIQ_START+INTERRUPT_DMA3) -+#define FIQ_DMA4 (FIQ_START+INTERRUPT_DMA4) -+#define FIQ_DMA5 (FIQ_START+INTERRUPT_DMA5) -+#define FIQ_DMA6 (FIQ_START+INTERRUPT_DMA6) -+#define FIQ_DMA7 (FIQ_START+INTERRUPT_DMA7) -+#define FIQ_DMA8 (FIQ_START+INTERRUPT_DMA8) -+#define FIQ_DMA9 (FIQ_START+INTERRUPT_DMA9) -+#define FIQ_DMA10 (FIQ_START+INTERRUPT_DMA10) -+#define FIQ_DMA11 (FIQ_START+INTERRUPT_DMA11) -+#define FIQ_DMA12 (FIQ_START+INTERRUPT_DMA12) -+#define FIQ_AUX (FIQ_START+INTERRUPT_AUX) -+#define FIQ_ARM (FIQ_START+INTERRUPT_ARM) -+#define FIQ_VPUDMA (FIQ_START+INTERRUPT_VPUDMA) -+#define FIQ_HOSTPORT (FIQ_START+INTERRUPT_HOSTPORT) -+#define FIQ_VIDEOSCALER (FIQ_START+INTERRUPT_VIDEOSCALER) -+#define FIQ_CCP2TX (FIQ_START+INTERRUPT_CCP2TX) -+#define FIQ_SDC (FIQ_START+INTERRUPT_SDC) -+#define FIQ_DSI0 (FIQ_START+INTERRUPT_DSI0) -+#define FIQ_AVE (FIQ_START+INTERRUPT_AVE) -+#define FIQ_CAM0 (FIQ_START+INTERRUPT_CAM0) -+#define FIQ_CAM1 (FIQ_START+INTERRUPT_CAM1) -+#define FIQ_HDMI0 (FIQ_START+INTERRUPT_HDMI0) -+#define FIQ_HDMI1 (FIQ_START+INTERRUPT_HDMI1) -+#define FIQ_PIXELVALVE1 (FIQ_START+INTERRUPT_PIXELVALVE1) -+#define FIQ_I2CSPISLV (FIQ_START+INTERRUPT_I2CSPISLV) -+#define FIQ_DSI1 (FIQ_START+INTERRUPT_DSI1) -+#define FIQ_PWA0 (FIQ_START+INTERRUPT_PWA0) -+#define FIQ_PWA1 (FIQ_START+INTERRUPT_PWA1) -+#define FIQ_CPR (FIQ_START+INTERRUPT_CPR) -+#define FIQ_SMI (FIQ_START+INTERRUPT_SMI) -+#define FIQ_GPIO0 (FIQ_START+INTERRUPT_GPIO0) -+#define FIQ_GPIO1 (FIQ_START+INTERRUPT_GPIO1) -+#define FIQ_GPIO2 (FIQ_START+INTERRUPT_GPIO2) -+#define FIQ_GPIO3 (FIQ_START+INTERRUPT_GPIO3) -+#define FIQ_I2C (FIQ_START+INTERRUPT_I2C) -+#define FIQ_SPI (FIQ_START+INTERRUPT_SPI) -+#define FIQ_I2SPCM (FIQ_START+INTERRUPT_I2SPCM) -+#define FIQ_SDIO (FIQ_START+INTERRUPT_SDIO) -+#define FIQ_UART (FIQ_START+INTERRUPT_UART) -+#define FIQ_SLIMBUS (FIQ_START+INTERRUPT_SLIMBUS) -+#define FIQ_VEC (FIQ_START+INTERRUPT_VEC) -+#define FIQ_CPG (FIQ_START+INTERRUPT_CPG) -+#define FIQ_RNG (FIQ_START+INTERRUPT_RNG) -+#define FIQ_ARASANSDIO (FIQ_START+INTERRUPT_ARASANSDIO) -+#define FIQ_AVSPMON (FIQ_START+INTERRUPT_AVSPMON) -+ -+#define FIQ_ARM_TIMER (FIQ_START+INTERRUPT_ARM_TIMER) -+#define FIQ_ARM_MAILBOX (FIQ_START+INTERRUPT_ARM_MAILBOX) -+#define FIQ_ARM_DOORBELL_0 (FIQ_START+INTERRUPT_ARM_DOORBELL_0) -+#define FIQ_ARM_DOORBELL_1 (FIQ_START+INTERRUPT_ARM_DOORBELL_1) -+#define FIQ_VPU0_HALTED (FIQ_START+INTERRUPT_VPU0_HALTED) -+#define FIQ_VPU1_HALTED (FIQ_START+INTERRUPT_VPU1_HALTED) -+#define FIQ_ILLEGAL_TYPE0 (FIQ_START+INTERRUPT_ILLEGAL_TYPE0) -+#define FIQ_ILLEGAL_TYPE1 (FIQ_START+INTERRUPT_ILLEGAL_TYPE1) -+#define FIQ_PENDING1 (FIQ_START+INTERRUPT_PENDING1) -+#define FIQ_PENDING2 (FIQ_START+INTERRUPT_PENDING2) -+ -+#define GPIO_IRQ_START (HARD_IRQS + FIQ_IRQS) -+ -+#define HARD_IRQS (64 + 21) -+#define FIQ_IRQS (64 + 21) -+#define GPIO_IRQS (32*5) -+ -+#define NR_IRQS HARD_IRQS+FIQ_IRQS+GPIO_IRQS -+ -+ -+#endif /* _BCM2708_IRQS_H_ */ ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/memory.h -@@ -0,0 +1,57 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/memory.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_MEMORY_H -+#define __ASM_ARCH_MEMORY_H -+ -+/* Memory overview: -+ -+ [ARMcore] <--virtual addr--> -+ [ARMmmu] <--physical addr--> -+ [GERTmap] <--bus add--> -+ [VCperiph] -+ -+*/ -+ -+/* -+ * Physical DRAM offset. -+ */ -+#define PLAT_PHYS_OFFSET UL(0x00000000) -+#define VC_ARMMEM_OFFSET UL(0x00000000) /* offset in VC of ARM memory */ -+ -+#ifdef CONFIG_BCM2708_NOL2CACHE -+ #define _REAL_BUS_OFFSET UL(0xC0000000) /* don't use L1 or L2 caches */ -+#else -+ #define _REAL_BUS_OFFSET UL(0x40000000) /* use L2 cache */ -+#endif -+ -+/* We're using the memory at 64M in the VideoCore for Linux - this adjustment -+ * will provide the offset into this area as well as setting the bits that -+ * stop the L1 and L2 cache from being used -+ * -+ * WARNING: this only works because the ARM is given memory at a fixed location -+ * (ARMMEM_OFFSET) -+ */ -+#define BUS_OFFSET (VC_ARMMEM_OFFSET + _REAL_BUS_OFFSET) -+#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET)) -+#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET)) -+#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - PLAT_PHYS_OFFSET)) -+#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - PLAT_PHYS_OFFSET)) -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/platform.h -@@ -0,0 +1,226 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/platform.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef _BCM2708_PLATFORM_H -+#define _BCM2708_PLATFORM_H -+ -+ -+/* macros to get at IO space when running virtually */ -+#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) -+ -+#define __io_address(n) IOMEM(IO_ADDRESS(n)) -+ -+ -+/* -+ * SDRAM -+ */ -+#define BCM2708_SDRAM_BASE 0x00000000 -+ -+/* -+ * Logic expansion modules -+ * -+ */ -+ -+ -+/* ------------------------------------------------------------------------ -+ * BCM2708 ARMCTRL Registers -+ * ------------------------------------------------------------------------ -+ */ -+ -+#define HW_REGISTER_RW(addr) (addr) -+#define HW_REGISTER_RO(addr) (addr) -+ -+#include "arm_control.h" -+#undef ARM_BASE -+ -+/* -+ * Definitions and addresses for the ARM CONTROL logic -+ * This file is manually generated. -+ */ -+ -+#define BCM2708_PERI_BASE 0x20000000 -+#define IC0_BASE (BCM2708_PERI_BASE + 0x2000) -+#define ST_BASE (BCM2708_PERI_BASE + 0x3000) /* System Timer */ -+#define MPHI_BASE (BCM2708_PERI_BASE + 0x6000) /* Message -based Parallel Host Interface */ -+#define DMA_BASE (BCM2708_PERI_BASE + 0x7000) /* DMA controller */ -+#define ARM_BASE (BCM2708_PERI_BASE + 0xB000) /* BCM2708 ARM control block */ -+#define PM_BASE (BCM2708_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */ -+#define RNG_BASE (BCM2708_PERI_BASE + 0x104000) /* Hardware RNG */ -+#define GPIO_BASE (BCM2708_PERI_BASE + 0x200000) /* GPIO */ -+#define UART0_BASE (BCM2708_PERI_BASE + 0x201000) /* Uart 0 */ -+#define MMCI0_BASE (BCM2708_PERI_BASE + 0x202000) /* MMC interface */ -+#define SPI0_BASE (BCM2708_PERI_BASE + 0x204000) /* SPI0 */ -+#define BSC0_BASE (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */ -+#define UART1_BASE (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */ -+#define EMMC_BASE (BCM2708_PERI_BASE + 0x300000) /* eMMC interface */ -+#define SMI_BASE (BCM2708_PERI_BASE + 0x600000) /* SMI */ -+#define BSC1_BASE (BCM2708_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */ -+#define USB_BASE (BCM2708_PERI_BASE + 0x980000) /* DTC_OTG USB controller */ -+#define MCORE_BASE (BCM2708_PERI_BASE + 0x0000) /* Fake frame buffer device (actually the multicore sync block*/ -+ -+#define ARMCTRL_BASE (ARM_BASE + 0x000) -+#define ARMCTRL_IC_BASE (ARM_BASE + 0x200) /* ARM interrupt controller */ -+#define ARMCTRL_TIMER0_1_BASE (ARM_BASE + 0x400) /* Timer 0 and 1 */ -+#define ARMCTRL_0_SBM_BASE (ARM_BASE + 0x800) /* User 0 (ARM)'s Semaphores Doorbells and Mailboxes */ -+ -+ -+/* -+ * Interrupt assignments -+ */ -+ -+#define ARM_IRQ1_BASE 0 -+#define INTERRUPT_TIMER0 (ARM_IRQ1_BASE + 0) -+#define INTERRUPT_TIMER1 (ARM_IRQ1_BASE + 1) -+#define INTERRUPT_TIMER2 (ARM_IRQ1_BASE + 2) -+#define INTERRUPT_TIMER3 (ARM_IRQ1_BASE + 3) -+#define INTERRUPT_CODEC0 (ARM_IRQ1_BASE + 4) -+#define INTERRUPT_CODEC1 (ARM_IRQ1_BASE + 5) -+#define INTERRUPT_CODEC2 (ARM_IRQ1_BASE + 6) -+#define INTERRUPT_VC_JPEG (ARM_IRQ1_BASE + 7) -+#define INTERRUPT_ISP (ARM_IRQ1_BASE + 8) -+#define INTERRUPT_VC_USB (ARM_IRQ1_BASE + 9) -+#define INTERRUPT_VC_3D (ARM_IRQ1_BASE + 10) -+#define INTERRUPT_TRANSPOSER (ARM_IRQ1_BASE + 11) -+#define INTERRUPT_MULTICORESYNC0 (ARM_IRQ1_BASE + 12) -+#define INTERRUPT_MULTICORESYNC1 (ARM_IRQ1_BASE + 13) -+#define INTERRUPT_MULTICORESYNC2 (ARM_IRQ1_BASE + 14) -+#define INTERRUPT_MULTICORESYNC3 (ARM_IRQ1_BASE + 15) -+#define INTERRUPT_DMA0 (ARM_IRQ1_BASE + 16) -+#define INTERRUPT_DMA1 (ARM_IRQ1_BASE + 17) -+#define INTERRUPT_VC_DMA2 (ARM_IRQ1_BASE + 18) -+#define INTERRUPT_VC_DMA3 (ARM_IRQ1_BASE + 19) -+#define INTERRUPT_DMA4 (ARM_IRQ1_BASE + 20) -+#define INTERRUPT_DMA5 (ARM_IRQ1_BASE + 21) -+#define INTERRUPT_DMA6 (ARM_IRQ1_BASE + 22) -+#define INTERRUPT_DMA7 (ARM_IRQ1_BASE + 23) -+#define INTERRUPT_DMA8 (ARM_IRQ1_BASE + 24) -+#define INTERRUPT_DMA9 (ARM_IRQ1_BASE + 25) -+#define INTERRUPT_DMA10 (ARM_IRQ1_BASE + 26) -+#define INTERRUPT_DMA11 (ARM_IRQ1_BASE + 27) -+#define INTERRUPT_DMA12 (ARM_IRQ1_BASE + 28) -+#define INTERRUPT_AUX (ARM_IRQ1_BASE + 29) -+#define INTERRUPT_ARM (ARM_IRQ1_BASE + 30) -+#define INTERRUPT_VPUDMA (ARM_IRQ1_BASE + 31) -+ -+#define ARM_IRQ2_BASE 32 -+#define INTERRUPT_HOSTPORT (ARM_IRQ2_BASE + 0) -+#define INTERRUPT_VIDEOSCALER (ARM_IRQ2_BASE + 1) -+#define INTERRUPT_CCP2TX (ARM_IRQ2_BASE + 2) -+#define INTERRUPT_SDC (ARM_IRQ2_BASE + 3) -+#define INTERRUPT_DSI0 (ARM_IRQ2_BASE + 4) -+#define INTERRUPT_AVE (ARM_IRQ2_BASE + 5) -+#define INTERRUPT_CAM0 (ARM_IRQ2_BASE + 6) -+#define INTERRUPT_CAM1 (ARM_IRQ2_BASE + 7) -+#define INTERRUPT_HDMI0 (ARM_IRQ2_BASE + 8) -+#define INTERRUPT_HDMI1 (ARM_IRQ2_BASE + 9) -+#define INTERRUPT_PIXELVALVE1 (ARM_IRQ2_BASE + 10) -+#define INTERRUPT_I2CSPISLV (ARM_IRQ2_BASE + 11) -+#define INTERRUPT_DSI1 (ARM_IRQ2_BASE + 12) -+#define INTERRUPT_PWA0 (ARM_IRQ2_BASE + 13) -+#define INTERRUPT_PWA1 (ARM_IRQ2_BASE + 14) -+#define INTERRUPT_CPR (ARM_IRQ2_BASE + 15) -+#define INTERRUPT_SMI (ARM_IRQ2_BASE + 16) -+#define INTERRUPT_GPIO0 (ARM_IRQ2_BASE + 17) -+#define INTERRUPT_GPIO1 (ARM_IRQ2_BASE + 18) -+#define INTERRUPT_GPIO2 (ARM_IRQ2_BASE + 19) -+#define INTERRUPT_GPIO3 (ARM_IRQ2_BASE + 20) -+#define INTERRUPT_VC_I2C (ARM_IRQ2_BASE + 21) -+#define INTERRUPT_VC_SPI (ARM_IRQ2_BASE + 22) -+#define INTERRUPT_VC_I2SPCM (ARM_IRQ2_BASE + 23) -+#define INTERRUPT_VC_SDIO (ARM_IRQ2_BASE + 24) -+#define INTERRUPT_VC_UART (ARM_IRQ2_BASE + 25) -+#define INTERRUPT_SLIMBUS (ARM_IRQ2_BASE + 26) -+#define INTERRUPT_VEC (ARM_IRQ2_BASE + 27) -+#define INTERRUPT_CPG (ARM_IRQ2_BASE + 28) -+#define INTERRUPT_RNG (ARM_IRQ2_BASE + 29) -+#define INTERRUPT_VC_ARASANSDIO (ARM_IRQ2_BASE + 30) -+#define INTERRUPT_AVSPMON (ARM_IRQ2_BASE + 31) -+ -+#define ARM_IRQ0_BASE 64 -+#define INTERRUPT_ARM_TIMER (ARM_IRQ0_BASE + 0) -+#define INTERRUPT_ARM_MAILBOX (ARM_IRQ0_BASE + 1) -+#define INTERRUPT_ARM_DOORBELL_0 (ARM_IRQ0_BASE + 2) -+#define INTERRUPT_ARM_DOORBELL_1 (ARM_IRQ0_BASE + 3) -+#define INTERRUPT_VPU0_HALTED (ARM_IRQ0_BASE + 4) -+#define INTERRUPT_VPU1_HALTED (ARM_IRQ0_BASE + 5) -+#define INTERRUPT_ILLEGAL_TYPE0 (ARM_IRQ0_BASE + 6) -+#define INTERRUPT_ILLEGAL_TYPE1 (ARM_IRQ0_BASE + 7) -+#define INTERRUPT_PENDING1 (ARM_IRQ0_BASE + 8) -+#define INTERRUPT_PENDING2 (ARM_IRQ0_BASE + 9) -+#define INTERRUPT_JPEG (ARM_IRQ0_BASE + 10) -+#define INTERRUPT_USB (ARM_IRQ0_BASE + 11) -+#define INTERRUPT_3D (ARM_IRQ0_BASE + 12) -+#define INTERRUPT_DMA2 (ARM_IRQ0_BASE + 13) -+#define INTERRUPT_DMA3 (ARM_IRQ0_BASE + 14) -+#define INTERRUPT_I2C (ARM_IRQ0_BASE + 15) -+#define INTERRUPT_SPI (ARM_IRQ0_BASE + 16) -+#define INTERRUPT_I2SPCM (ARM_IRQ0_BASE + 17) -+#define INTERRUPT_SDIO (ARM_IRQ0_BASE + 18) -+#define INTERRUPT_UART (ARM_IRQ0_BASE + 19) -+#define INTERRUPT_ARASANSDIO (ARM_IRQ0_BASE + 20) -+ -+#define MAXIRQNUM (32 + 32 + 20) -+#define MAXFIQNUM (32 + 32 + 20) -+ -+#define MAX_TIMER 2 -+#define MAX_PERIOD 699050 -+#define TICKS_PER_uSEC 1 -+ -+/* -+ * These are useconds NOT ticks. -+ * -+ */ -+#define mSEC_1 1000 -+#define mSEC_5 (mSEC_1 * 5) -+#define mSEC_10 (mSEC_1 * 10) -+#define mSEC_25 (mSEC_1 * 25) -+#define SEC_1 (mSEC_1 * 1000) -+ -+/* -+ * Watchdog -+ */ -+#define PM_RSTC (PM_BASE+0x1c) -+#define PM_RSTS (PM_BASE+0x20) -+#define PM_WDOG (PM_BASE+0x24) -+ -+#define PM_WDOG_RESET 0000000000 -+#define PM_PASSWORD 0x5a000000 -+#define PM_WDOG_TIME_SET 0x000fffff -+#define PM_RSTC_WRCFG_CLR 0xffffffcf -+#define PM_RSTC_WRCFG_SET 0x00000030 -+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 -+#define PM_RSTC_RESET 0x00000102 -+ -+#define PM_RSTS_HADPOR_SET 0x00001000 -+#define PM_RSTS_HADSRH_SET 0x00000400 -+#define PM_RSTS_HADSRF_SET 0x00000200 -+#define PM_RSTS_HADSRQ_SET 0x00000100 -+#define PM_RSTS_HADWRH_SET 0x00000040 -+#define PM_RSTS_HADWRF_SET 0x00000020 -+#define PM_RSTS_HADWRQ_SET 0x00000010 -+#define PM_RSTS_HADDRH_SET 0x00000004 -+#define PM_RSTS_HADDRF_SET 0x00000002 -+#define PM_RSTS_HADDRQ_SET 0x00000001 -+ -+#define UART0_CLOCK 3000000 -+ -+#endif -+ -+/* END */ ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/power.h -@@ -0,0 +1,26 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/power.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This device provides a shared mechanism for controlling the power to -+ * VideoCore subsystems. -+ */ -+ -+#ifndef _MACH_BCM2708_POWER_H -+#define _MACH_BCM2708_POWER_H -+ -+#include <linux/types.h> -+#include <mach/arm_power.h> -+ -+typedef unsigned int BCM_POWER_HANDLE_T; -+ -+extern int bcm_power_open(BCM_POWER_HANDLE_T *handle); -+extern int bcm_power_request(BCM_POWER_HANDLE_T handle, uint32_t request); -+extern int bcm_power_close(BCM_POWER_HANDLE_T handle); -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/system.h -@@ -0,0 +1,38 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/system.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * Copyright (C) 2003 ARM Limited -+ * Copyright (C) 2000 Deep Blue Solutions Ltd -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_SYSTEM_H -+#define __ASM_ARCH_SYSTEM_H -+ -+#include <linux/io.h> -+#include <mach/hardware.h> -+#include <mach/platform.h> -+ -+static inline void arch_idle(void) -+{ -+ /* -+ * This should do all the clock switching -+ * and wait for interrupt tricks -+ */ -+ cpu_do_idle(); -+} -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/timex.h -@@ -0,0 +1,23 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/timex.h -+ * -+ * BCM2708 sysem clock frequency -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#define CLOCK_TICK_RATE (1000000) ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/uncompress.h -@@ -0,0 +1,85 @@ -+/* -+ * arch/arm/mach-bcn2708/include/mach/uncompress.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * Copyright (C) 2003 ARM Limited -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/io.h> -+#include <linux/amba/serial.h> -+#include <mach/hardware.h> -+ -+#define UART_BAUD 115200 -+ -+#define BCM2708_UART_DR __io(UART0_BASE + UART01x_DR) -+#define BCM2708_UART_FR __io(UART0_BASE + UART01x_FR) -+#define BCM2708_UART_IBRD __io(UART0_BASE + UART011_IBRD) -+#define BCM2708_UART_FBRD __io(UART0_BASE + UART011_FBRD) -+#define BCM2708_UART_LCRH __io(UART0_BASE + UART011_LCRH) -+#define BCM2708_UART_CR __io(UART0_BASE + UART011_CR) -+ -+/* -+ * This does not append a newline -+ */ -+static inline void putc(int c) -+{ -+ while (__raw_readl(BCM2708_UART_FR) & UART01x_FR_TXFF) -+ barrier(); -+ -+ __raw_writel(c, BCM2708_UART_DR); -+} -+ -+static inline void flush(void) -+{ -+ int fr; -+ -+ do { -+ fr = __raw_readl(BCM2708_UART_FR); -+ barrier(); -+ } while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE); -+} -+ -+static inline void arch_decomp_setup(void) -+{ -+ int temp, div, rem, frac; -+ -+ temp = 16 * UART_BAUD; -+ div = UART0_CLOCK / temp; -+ rem = UART0_CLOCK % temp; -+ temp = (8 * rem) / UART_BAUD; -+ frac = (temp >> 1) + (temp & 1); -+ -+ /* Make sure the UART is disabled before we start */ -+ __raw_writel(0, BCM2708_UART_CR); -+ -+ /* Set the baud rate */ -+ __raw_writel(div, BCM2708_UART_IBRD); -+ __raw_writel(frac, BCM2708_UART_FBRD); -+ -+ /* Set the UART to 8n1, FIFO enabled */ -+ __raw_writel(UART01x_LCRH_WLEN_8 | UART01x_LCRH_FEN, BCM2708_UART_LCRH); -+ -+ /* Enable the UART */ -+ __raw_writel(UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE, -+ BCM2708_UART_CR); -+} -+ -+/* -+ * nothing to do -+ */ -+#define arch_decomp_wdog() -+ ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/vcio.h -@@ -0,0 +1,141 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/vcio.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef _MACH_BCM2708_VCIO_H -+#define _MACH_BCM2708_VCIO_H -+ -+/* Routines to handle I/O via the VideoCore "ARM control" registers -+ * (semaphores, doorbells, mailboxes) -+ */ -+ -+#define BCM_VCIO_DRIVER_NAME "bcm2708_vcio" -+ -+/* Constants shared with the ARM identifying separate mailbox channels */ -+#define MBOX_CHAN_POWER 0 /* for use by the power management interface */ -+#define MBOX_CHAN_FB 1 /* for use by the frame buffer */ -+#define MBOX_CHAN_VCHIQ 3 /* for use by the VCHIQ interface */ -+#define MBOX_CHAN_PROPERTY 8 /* for use by the property channel */ -+#define MBOX_CHAN_COUNT 9 -+ -+/* Mailbox property tags */ -+enum { -+ VCMSG_PROPERTY_END = 0x00000000, -+ VCMSG_GET_FIRMWARE_REVISION = 0x00000001, -+ VCMSG_GET_BOARD_MODEL = 0x00010001, -+ VCMSG_GET_BOARD_REVISION = 0x00020002, -+ VCMSG_GET_BOARD_MAC_ADDRESS = 0x00020003, -+ VCMSG_GET_BOARD_SERIAL = 0x00020004, -+ VCMSG_GET_ARM_MEMORY = 0x00020005, -+ VCMSG_GET_VC_MEMORY = 0x00020006, -+ VCMSG_GET_CLOCKS = 0x00020007, -+ VCMSG_GET_COMMAND_LINE = 0x00050001, -+ VCMSG_GET_DMA_CHANNELS = 0x00060001, -+ VCMSG_GET_POWER_STATE = 0x00020001, -+ VCMSG_GET_TIMING = 0x00020002, -+ VCMSG_SET_POWER_STATE = 0x00028001, -+ VCMSG_GET_CLOCK_STATE = 0x00030001, -+ VCMSG_SET_CLOCK_STATE = 0x00038001, -+ VCMSG_GET_CLOCK_RATE = 0x00030002, -+ VCMSG_SET_CLOCK_RATE = 0x00038002, -+ VCMSG_GET_VOLTAGE = 0x00030003, -+ VCMSG_SET_VOLTAGE = 0x00038003, -+ VCMSG_GET_MAX_CLOCK = 0x00030004, -+ VCMSG_GET_MAX_VOLTAGE = 0x00030005, -+ VCMSG_GET_TEMPERATURE = 0x00030006, -+ VCMSG_GET_MIN_CLOCK = 0x00030007, -+ VCMSG_GET_MIN_VOLTAGE = 0x00030008, -+ VCMSG_GET_TURBO = 0x00030009, -+ VCMSG_SET_TURBO = 0x00038009, -+ VCMSG_SET_ALLOCATE_BUFFER = 0x00040001, -+ VCMSG_SET_RELEASE_BUFFER = 0x00048001, -+ VCMSG_SET_BLANK_SCREEN = 0x00040002, -+ VCMSG_TST_BLANK_SCREEN = 0x00044002, -+ VCMSG_GET_PHYSICAL_WIDTH_HEIGHT = 0x00040003, -+ VCMSG_TST_PHYSICAL_WIDTH_HEIGHT = 0x00044003, -+ VCMSG_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003, -+ VCMSG_GET_VIRTUAL_WIDTH_HEIGHT = 0x00040004, -+ VCMSG_TST_VIRTUAL_WIDTH_HEIGHT = 0x00044004, -+ VCMSG_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004, -+ VCMSG_GET_DEPTH = 0x00040005, -+ VCMSG_TST_DEPTH = 0x00044005, -+ VCMSG_SET_DEPTH = 0x00048005, -+ VCMSG_GET_PIXEL_ORDER = 0x00040006, -+ VCMSG_TST_PIXEL_ORDER = 0x00044006, -+ VCMSG_SET_PIXEL_ORDER = 0x00048006, -+ VCMSG_GET_ALPHA_MODE = 0x00040007, -+ VCMSG_TST_ALPHA_MODE = 0x00044007, -+ VCMSG_SET_ALPHA_MODE = 0x00048007, -+ VCMSG_GET_PITCH = 0x00040008, -+ VCMSG_TST_PITCH = 0x00044008, -+ VCMSG_SET_PITCH = 0x00048008, -+ VCMSG_GET_VIRTUAL_OFFSET = 0x00040009, -+ VCMSG_TST_VIRTUAL_OFFSET = 0x00044009, -+ VCMSG_SET_VIRTUAL_OFFSET = 0x00048009, -+ VCMSG_GET_OVERSCAN = 0x0004000a, -+ VCMSG_TST_OVERSCAN = 0x0004400a, -+ VCMSG_SET_OVERSCAN = 0x0004800a, -+ VCMSG_GET_PALETTE = 0x0004000b, -+ VCMSG_TST_PALETTE = 0x0004400b, -+ VCMSG_SET_PALETTE = 0x0004800b, -+ VCMSG_GET_LAYER = 0x0004000c, -+ VCMSG_TST_LAYER = 0x0004400c, -+ VCMSG_SET_LAYER = 0x0004800c, -+ VCMSG_GET_TRANSFORM = 0x0004000d, -+ VCMSG_TST_TRANSFORM = 0x0004400d, -+ VCMSG_SET_TRANSFORM = 0x0004800d, -+}; -+ -+extern int /*rc*/ bcm_mailbox_read(unsigned chan, uint32_t *data28); -+extern int /*rc*/ bcm_mailbox_write(unsigned chan, uint32_t data28); -+extern int /*rc*/ bcm_mailbox_property(void *data, int size); -+ -+#include <linux/ioctl.h> -+ -+/* -+ * The major device number. We can't rely on dynamic -+ * registration any more, because ioctls need to know -+ * it. -+ */ -+#define MAJOR_NUM 100 -+ -+/* -+ * Set the message of the device driver -+ */ -+#define IOCTL_MBOX_PROPERTY _IOWR(MAJOR_NUM, 0, char *) -+/* -+ * _IOWR means that we're creating an ioctl command -+ * number for passing information from a user process -+ * to the kernel module and from the kernel module to user process -+ * -+ * The first arguments, MAJOR_NUM, is the major device -+ * number we're using. -+ * -+ * The second argument is the number of the command -+ * (there could be several with different meanings). -+ * -+ * The third argument is the type we want to get from -+ * the process to the kernel. -+ */ -+ -+/* -+ * The name of the device file -+ */ -+#define DEVICE_FILE_NAME "char_dev" -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/vc_mem.h -@@ -0,0 +1,36 @@ -+/***************************************************************************** -+* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#if !defined( VC_MEM_H ) -+#define VC_MEM_H -+ -+#include <linux/ioctl.h> -+ -+#define VC_MEM_IOC_MAGIC 'v' -+ -+#define VC_MEM_IOC_MEM_PHYS_ADDR _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long ) -+#define VC_MEM_IOC_MEM_SIZE _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int ) -+#define VC_MEM_IOC_MEM_BASE _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int ) -+#define VC_MEM_IOC_MEM_LOAD _IOR( VC_MEM_IOC_MAGIC, 3, unsigned int ) -+ -+#if defined( __KERNEL__ ) -+#define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF -+ -+extern unsigned long mm_vc_mem_phys_addr; -+extern unsigned int mm_vc_mem_size; -+extern int vc_mem_get_current_size( void ); -+#endif -+ -+#endif /* VC_MEM_H */ -+ ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/vc_support.h -@@ -0,0 +1,69 @@ -+#ifndef _VC_SUPPORT_H_ -+#define _VC_SUPPORT_H_ -+ -+/* -+ * vc_support.h -+ * -+ * Created on: 25 Nov 2012 -+ * Author: Simon -+ */ -+ -+enum { -+/* -+ If a MEM_HANDLE_T is discardable, the memory manager may resize it to size -+ 0 at any time when it is not locked or retained. -+ */ -+ MEM_FLAG_DISCARDABLE = 1 << 0, -+ -+ /* -+ If a MEM_HANDLE_T is allocating (or normal), its block of memory will be -+ accessed in an allocating fashion through the cache. -+ */ -+ MEM_FLAG_NORMAL = 0 << 2, -+ MEM_FLAG_ALLOCATING = MEM_FLAG_NORMAL, -+ -+ /* -+ If a MEM_HANDLE_T is direct, its block of memory will be accessed -+ directly, bypassing the cache. -+ */ -+ MEM_FLAG_DIRECT = 1 << 2, -+ -+ /* -+ If a MEM_HANDLE_T is coherent, its block of memory will be accessed in a -+ non-allocating fashion through the cache. -+ */ -+ MEM_FLAG_COHERENT = 2 << 2, -+ -+ /* -+ If a MEM_HANDLE_T is L1-nonallocating, its block of memory will be accessed by -+ the VPU in a fashion which is allocating in L2, but only coherent in L1. -+ */ -+ MEM_FLAG_L1_NONALLOCATING = (MEM_FLAG_DIRECT | MEM_FLAG_COHERENT), -+ -+ /* -+ If a MEM_HANDLE_T is zero'd, its contents are set to 0 rather than -+ MEM_HANDLE_INVALID on allocation and resize up. -+ */ -+ MEM_FLAG_ZERO = 1 << 4, -+ -+ /* -+ If a MEM_HANDLE_T is uninitialised, it will not be reset to a defined value -+ (either zero, or all 1's) on allocation. -+ */ -+ MEM_FLAG_NO_INIT = 1 << 5, -+ -+ /* -+ Hints. -+ */ -+ MEM_FLAG_HINT_PERMALOCK = 1 << 6, /* Likely to be locked for long periods of time. */ -+}; -+ -+unsigned int AllocateVcMemory(unsigned int *pHandle, unsigned int size, unsigned int alignment, unsigned int flags); -+unsigned int ReleaseVcMemory(unsigned int handle); -+unsigned int LockVcMemory(unsigned int *pBusAddress, unsigned int handle); -+unsigned int UnlockVcMemory(unsigned int handle); -+ -+unsigned int ExecuteVcCode(unsigned int code, -+ unsigned int r0, unsigned int r1, unsigned int r2, unsigned int r3, unsigned int r4, unsigned int r5); -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/vmalloc.h -@@ -0,0 +1,20 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/vmalloc.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#define VMALLOC_END (0xe8000000) ---- /dev/null -+++ b/arch/arm/mach-bcm2708/Kconfig -@@ -0,0 +1,48 @@ -+menu "Broadcom BCM2708 Implementations" -+ depends on ARCH_BCM2708 -+ -+config MACH_BCM2708 -+ bool "Broadcom BCM2708 Development Platform" -+ select NEED_MACH_MEMORY_H -+ select NEED_MACH_IO_H -+ select CPU_V6 -+ help -+ Include support for the Broadcom(R) BCM2708 platform. -+ -+config BCM2708_GPIO -+ bool "BCM2708 gpio support" -+ depends on MACH_BCM2708 -+ select ARCH_REQUIRE_GPIOLIB -+ default y -+ help -+ Include support for the Broadcom(R) BCM2708 gpio. -+ -+config BCM2708_VCMEM -+ bool "Videocore Memory" -+ depends on MACH_BCM2708 -+ default y -+ help -+ Helper for videocore memory access and total size allocation. -+ -+config BCM2708_NOL2CACHE -+ bool "Videocore L2 cache disable" -+ depends on MACH_BCM2708 -+ default n -+ help -+ Do not allow ARM to use GPU's L2 cache. Requires disable_l2cache in config.txt. -+ -+config BCM2708_DMAER -+ tristate "BCM2708 DMA helper" -+ depends on MACH_BCM2708 -+ default n -+ help -+ Enable DMA helper for accelerating X composition -+ -+config BCM2708_SPIDEV -+ bool "Bind spidev to SPI0 master" -+ depends on MACH_BCM2708 -+ depends on SPI -+ default y -+ help -+ Binds spidev driver to the SPI0 master -+endmenu ---- /dev/null -+++ b/arch/arm/mach-bcm2708/Makefile -@@ -0,0 +1,11 @@ -+# -+# Makefile for the linux kernel. -+# -+ -+obj-$(CONFIG_MACH_BCM2708) += clock.o bcm2708.o armctrl.o vcio.o power.o dma.o -+obj-$(CONFIG_BCM2708_GPIO) += bcm2708_gpio.o -+obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o -+ -+obj-$(CONFIG_BCM2708_DMAER) += dmaer_master.o -+dmaer_master-objs := dmaer.o vc_support.o -+ ---- /dev/null -+++ b/arch/arm/mach-bcm2708/Makefile.boot -@@ -0,0 +1,3 @@ -+ zreladdr-y := 0x00008000 -+params_phys-y := 0x00000100 -+initrd_phys-y := 0x00800000 ---- /dev/null -+++ b/arch/arm/mach-bcm2708/power.c -@@ -0,0 +1,194 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/power.c -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This device provides a shared mechanism for controlling the power to -+ * VideoCore subsystems. -+ */ -+ -+#include <linux/module.h> -+#include <linux/semaphore.h> -+#include <linux/bug.h> -+#include <mach/power.h> -+#include <mach/vcio.h> -+#include <mach/arm_power.h> -+ -+#define DRIVER_NAME "bcm2708_power" -+ -+#define BCM_POWER_MAXCLIENTS 4 -+#define BCM_POWER_NOCLIENT (1<<31) -+ -+/* Some drivers expect there devices to be permanently powered */ -+#define BCM_POWER_ALWAYS_ON (BCM_POWER_USB) -+ -+#if 1 -+#define DPRINTK printk -+#else -+#define DPRINTK if (0) printk -+#endif -+ -+struct state_struct { -+ uint32_t global_request; -+ uint32_t client_request[BCM_POWER_MAXCLIENTS]; -+ struct semaphore client_mutex; -+ struct semaphore mutex; -+} g_state; -+ -+int bcm_power_open(BCM_POWER_HANDLE_T *handle) -+{ -+ BCM_POWER_HANDLE_T i; -+ int ret = -EBUSY; -+ -+ down(&g_state.client_mutex); -+ -+ for (i = 0; i < BCM_POWER_MAXCLIENTS; i++) { -+ if (g_state.client_request[i] == BCM_POWER_NOCLIENT) { -+ g_state.client_request[i] = BCM_POWER_NONE; -+ *handle = i; -+ ret = 0; -+ break; -+ } -+ } -+ -+ up(&g_state.client_mutex); -+ -+ DPRINTK("bcm_power_open() -> %d\n", *handle); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(bcm_power_open); -+ -+int bcm_power_request(BCM_POWER_HANDLE_T handle, uint32_t request) -+{ -+ int rc = 0; -+ -+ DPRINTK("bcm_power_request(%d, %x)\n", handle, request); -+ -+ if ((handle < BCM_POWER_MAXCLIENTS) && -+ (g_state.client_request[handle] != BCM_POWER_NOCLIENT)) { -+ if (down_interruptible(&g_state.mutex) != 0) { -+ DPRINTK("bcm_power_request -> interrupted\n"); -+ return -EINTR; -+ } -+ -+ if (request != g_state.client_request[handle]) { -+ uint32_t others_request = 0; -+ uint32_t global_request; -+ BCM_POWER_HANDLE_T i; -+ -+ for (i = 0; i < BCM_POWER_MAXCLIENTS; i++) { -+ if (i != handle) -+ others_request |= -+ g_state.client_request[i]; -+ } -+ others_request &= ~BCM_POWER_NOCLIENT; -+ -+ global_request = request | others_request; -+ if (global_request != g_state.global_request) { -+ uint32_t actual; -+ -+ /* Send a request to VideoCore */ -+ bcm_mailbox_write(MBOX_CHAN_POWER, -+ global_request << 4); -+ -+ /* Wait for a response during power-up */ -+ if (global_request & ~g_state.global_request) { -+ rc = bcm_mailbox_read(MBOX_CHAN_POWER, -+ &actual); -+ DPRINTK -+ ("bcm_mailbox_read -> %08x, %d\n", -+ actual, rc); -+ actual >>= 4; -+ } else { -+ rc = 0; -+ actual = global_request; -+ } -+ -+ if (rc == 0) { -+ if (actual != global_request) { -+ printk(KERN_ERR -+ "%s: prev global %x, new global %x, actual %x, request %x, others_request %x\n", -+ __func__, -+ g_state.global_request, -+ global_request, actual, request, others_request); -+ /* A failure */ -+ BUG_ON((others_request & actual) -+ != others_request); -+ request &= actual; -+ rc = -EIO; -+ } -+ -+ g_state.global_request = actual; -+ g_state.client_request[handle] = -+ request; -+ } -+ } -+ } -+ up(&g_state.mutex); -+ } else { -+ rc = -EINVAL; -+ } -+ DPRINTK("bcm_power_request -> %d\n", rc); -+ return rc; -+} -+EXPORT_SYMBOL_GPL(bcm_power_request); -+ -+int bcm_power_close(BCM_POWER_HANDLE_T handle) -+{ -+ int rc; -+ -+ DPRINTK("bcm_power_close(%d)\n", handle); -+ -+ rc = bcm_power_request(handle, BCM_POWER_NONE); -+ if (rc == 0) -+ g_state.client_request[handle] = BCM_POWER_NOCLIENT; -+ -+ return rc; -+} -+EXPORT_SYMBOL_GPL(bcm_power_close); -+ -+static int __init bcm_power_init(void) -+{ -+#if defined(BCM_POWER_ALWAYS_ON) -+ BCM_POWER_HANDLE_T always_on_handle; -+#endif -+ int rc = 0; -+ int i; -+ -+ printk(KERN_INFO "bcm_power: Broadcom power driver\n"); -+ bcm_mailbox_write(MBOX_CHAN_POWER, 0); -+ -+ for (i = 0; i < BCM_POWER_MAXCLIENTS; i++) -+ g_state.client_request[i] = BCM_POWER_NOCLIENT; -+ -+ sema_init(&g_state.client_mutex, 1); -+ sema_init(&g_state.mutex, 1); -+ -+ g_state.global_request = 0; -+ -+#if defined(BCM_POWER_ALWAYS_ON) -+ if (BCM_POWER_ALWAYS_ON) { -+ bcm_power_open(&always_on_handle); -+ bcm_power_request(always_on_handle, BCM_POWER_ALWAYS_ON); -+ } -+#endif -+ -+ return rc; -+} -+ -+static void __exit bcm_power_exit(void) -+{ -+ bcm_mailbox_write(MBOX_CHAN_POWER, 0); -+} -+ -+arch_initcall(bcm_power_init); /* Initialize early */ -+module_exit(bcm_power_exit); -+ -+MODULE_AUTHOR("Phil Elwell"); -+MODULE_DESCRIPTION("Interface to BCM2708 power management"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/arch/arm/mach-bcm2708/vcio.c -@@ -0,0 +1,474 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/vcio.c -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This device provides a shared mechanism for writing to the mailboxes, -+ * semaphores, doorbells etc. that are shared between the ARM and the -+ * VideoCore processor -+ */ -+ -+#if defined(CONFIG_SERIAL_BCM_MBOX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -+#define SUPPORT_SYSRQ -+#endif -+ -+#include <linux/module.h> -+#include <linux/console.h> -+#include <linux/serial_core.h> -+#include <linux/serial.h> -+#include <linux/errno.h> -+#include <linux/device.h> -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/dma-mapping.h> -+#include <linux/platform_device.h> -+#include <linux/sysrq.h> -+#include <linux/delay.h> -+#include <linux/slab.h> -+#include <linux/interrupt.h> -+#include <linux/irq.h> -+ -+#include <linux/io.h> -+ -+#include <mach/vcio.h> -+#include <mach/platform.h> -+ -+#include <asm/uaccess.h> -+ -+ -+#define DRIVER_NAME BCM_VCIO_DRIVER_NAME -+ -+/* ---------------------------------------------------------------------- -+ * Mailbox -+ * -------------------------------------------------------------------- */ -+ -+/* offsets from a mail box base address */ -+#define MAIL_WRT 0x00 /* write - and next 4 words */ -+#define MAIL_RD 0x00 /* read - and next 4 words */ -+#define MAIL_POL 0x10 /* read without popping the fifo */ -+#define MAIL_SND 0x14 /* sender ID (bottom two bits) */ -+#define MAIL_STA 0x18 /* status */ -+#define MAIL_CNF 0x1C /* configuration */ -+ -+#define MBOX_MSG(chan, data28) (((data28) & ~0xf) | ((chan) & 0xf)) -+#define MBOX_MSG_LSB(chan, data28) (((data28) << 4) | ((chan) & 0xf)) -+#define MBOX_CHAN(msg) ((msg) & 0xf) -+#define MBOX_DATA28(msg) ((msg) & ~0xf) -+#define MBOX_DATA28_LSB(msg) (((uint32_t)msg) >> 4) -+ -+#define MBOX_MAGIC 0xd0d0c0de -+ -+struct vc_mailbox { -+ struct device *dev; /* parent device */ -+ void __iomem *status; -+ void __iomem *config; -+ void __iomem *read; -+ void __iomem *write; -+ uint32_t msg[MBOX_CHAN_COUNT]; -+ struct semaphore sema[MBOX_CHAN_COUNT]; -+ uint32_t magic; -+}; -+ -+static void mbox_init(struct vc_mailbox *mbox_out, struct device *dev, -+ uint32_t addr_mbox) -+{ -+ int i; -+ -+ mbox_out->dev = dev; -+ mbox_out->status = __io_address(addr_mbox + MAIL_STA); -+ mbox_out->config = __io_address(addr_mbox + MAIL_CNF); -+ mbox_out->read = __io_address(addr_mbox + MAIL_RD); -+ /* Write to the other mailbox */ -+ mbox_out->write = -+ __io_address((addr_mbox ^ ARM_0_MAIL0_WRT ^ ARM_0_MAIL1_WRT) + -+ MAIL_WRT); -+ -+ for (i = 0; i < MBOX_CHAN_COUNT; i++) { -+ mbox_out->msg[i] = 0; -+ sema_init(&mbox_out->sema[i], 0); -+ } -+ -+ /* Enable the interrupt on data reception */ -+ writel(ARM_MC_IHAVEDATAIRQEN, mbox_out->config); -+ -+ mbox_out->magic = MBOX_MAGIC; -+} -+ -+static int mbox_write(struct vc_mailbox *mbox, unsigned chan, uint32_t data28) -+{ -+ int rc; -+ -+ if (mbox->magic != MBOX_MAGIC) -+ rc = -EINVAL; -+ else { -+ /* wait for the mailbox FIFO to have some space in it */ -+ while (0 != (readl(mbox->status) & ARM_MS_FULL)) -+ cpu_relax(); -+ -+ writel(MBOX_MSG(chan, data28), mbox->write); -+ rc = 0; -+ } -+ return rc; -+} -+ -+static int mbox_read(struct vc_mailbox *mbox, unsigned chan, uint32_t *data28) -+{ -+ int rc; -+ -+ if (mbox->magic != MBOX_MAGIC) -+ rc = -EINVAL; -+ else { -+ down(&mbox->sema[chan]); -+ *data28 = MBOX_DATA28(mbox->msg[chan]); -+ mbox->msg[chan] = 0; -+ rc = 0; -+ } -+ return rc; -+} -+ -+static irqreturn_t mbox_irq(int irq, void *dev_id) -+{ -+ /* wait for the mailbox FIFO to have some data in it */ -+ struct vc_mailbox *mbox = (struct vc_mailbox *) dev_id; -+ int status = readl(mbox->status); -+ int ret = IRQ_NONE; -+ -+ while (!(status & ARM_MS_EMPTY)) { -+ uint32_t msg = readl(mbox->read); -+ int chan = MBOX_CHAN(msg); -+ if (chan < MBOX_CHAN_COUNT) { -+ if (mbox->msg[chan]) { -+ /* Overflow */ -+ printk(KERN_ERR DRIVER_NAME -+ ": mbox chan %d overflow - drop %08x\n", -+ chan, msg); -+ } else { -+ mbox->msg[chan] = (msg | 0xf); -+ up(&mbox->sema[chan]); -+ } -+ } else { -+ printk(KERN_ERR DRIVER_NAME -+ ": invalid channel selector (msg %08x)\n", msg); -+ } -+ ret = IRQ_HANDLED; -+ status = readl(mbox->status); -+ } -+ return ret; -+} -+ -+static struct irqaction mbox_irqaction = { -+ .name = "ARM Mailbox IRQ", -+ .flags = IRQF_DISABLED | IRQF_IRQPOLL, -+ .handler = mbox_irq, -+}; -+ -+/* ---------------------------------------------------------------------- -+ * Mailbox Methods -+ * -------------------------------------------------------------------- */ -+ -+static struct device *mbox_dev; /* we assume there's only one! */ -+ -+static int dev_mbox_write(struct device *dev, unsigned chan, uint32_t data28) -+{ -+ int rc; -+ -+ struct vc_mailbox *mailbox = dev_get_drvdata(dev); -+ device_lock(dev); -+ rc = mbox_write(mailbox, chan, data28); -+ device_unlock(dev); -+ -+ return rc; -+} -+ -+static int dev_mbox_read(struct device *dev, unsigned chan, uint32_t *data28) -+{ -+ int rc; -+ -+ struct vc_mailbox *mailbox = dev_get_drvdata(dev); -+ device_lock(dev); -+ rc = mbox_read(mailbox, chan, data28); -+ device_unlock(dev); -+ -+ return rc; -+} -+ -+extern int bcm_mailbox_write(unsigned chan, uint32_t data28) -+{ -+ if (mbox_dev) -+ return dev_mbox_write(mbox_dev, chan, data28); -+ else -+ return -ENODEV; -+} -+EXPORT_SYMBOL_GPL(bcm_mailbox_write); -+ -+extern int bcm_mailbox_read(unsigned chan, uint32_t *data28) -+{ -+ if (mbox_dev) -+ return dev_mbox_read(mbox_dev, chan, data28); -+ else -+ return -ENODEV; -+} -+EXPORT_SYMBOL_GPL(bcm_mailbox_read); -+ -+static void dev_mbox_register(const char *dev_name, struct device *dev) -+{ -+ mbox_dev = dev; -+} -+ -+static int mbox_copy_from_user(void *dst, const void *src, int size) -+{ -+ if ( (uint32_t)src < TASK_SIZE) -+ { -+ return copy_from_user(dst, src, size); -+ } -+ else -+ { -+ memcpy( dst, src, size ); -+ return 0; -+ } -+} -+ -+static int mbox_copy_to_user(void *dst, const void *src, int size) -+{ -+ if ( (uint32_t)dst < TASK_SIZE) -+ { -+ return copy_to_user(dst, src, size); -+ } -+ else -+ { -+ memcpy( dst, src, size ); -+ return 0; -+ } -+} -+ -+static DEFINE_MUTEX(mailbox_lock); -+extern int bcm_mailbox_property(void *data, int size) -+{ -+ uint32_t success; -+ dma_addr_t mem_bus; /* the memory address accessed from videocore */ -+ void *mem_kern; /* the memory address accessed from driver */ -+ int s = 0; -+ -+ mutex_lock(&mailbox_lock); -+ /* allocate some memory for the messages communicating with GPU */ -+ mem_kern = dma_alloc_coherent(NULL, PAGE_ALIGN(size), &mem_bus, GFP_ATOMIC); -+ if (mem_kern) { -+ /* create the message */ -+ mbox_copy_from_user(mem_kern, data, size); -+ -+ /* send the message */ -+ wmb(); -+ s = bcm_mailbox_write(MBOX_CHAN_PROPERTY, (uint32_t)mem_bus); -+ if (s == 0) { -+ s = bcm_mailbox_read(MBOX_CHAN_PROPERTY, &success); -+ } -+ if (s == 0) { -+ /* copy the response */ -+ rmb(); -+ mbox_copy_to_user(data, mem_kern, size); -+ } -+ dma_free_coherent(NULL, PAGE_ALIGN(size), mem_kern, mem_bus); -+ } else { -+ s = -ENOMEM; -+ } -+ if (s != 0) -+ printk(KERN_ERR DRIVER_NAME ": %s failed (%d)\n", __func__, s); -+ -+ mutex_unlock(&mailbox_lock); -+ return s; -+} -+EXPORT_SYMBOL_GPL(bcm_mailbox_property); -+ -+/* ---------------------------------------------------------------------- -+ * Platform Device for Mailbox -+ * -------------------------------------------------------------------- */ -+ -+/* -+ * Is the device open right now? Used to prevent -+ * concurent access into the same device -+ */ -+static int Device_Open = 0; -+ -+/* -+ * This is called whenever a process attempts to open the device file -+ */ -+static int device_open(struct inode *inode, struct file *file) -+{ -+ /* -+ * We don't want to talk to two processes at the same time -+ */ -+ if (Device_Open) -+ return -EBUSY; -+ -+ Device_Open++; -+ /* -+ * Initialize the message -+ */ -+ try_module_get(THIS_MODULE); -+ return 0; -+} -+ -+static int device_release(struct inode *inode, struct file *file) -+{ -+ /* -+ * We're now ready for our next caller -+ */ -+ Device_Open--; -+ -+ module_put(THIS_MODULE); -+ return 0; -+} -+ -+/* -+ * This function is called whenever a process tries to do an ioctl on our -+ * device file. We get two extra parameters (additional to the inode and file -+ * structures, which all device functions get): the number of the ioctl called -+ * and the parameter given to the ioctl function. -+ * -+ * If the ioctl is write or read/write (meaning output is returned to the -+ * calling process), the ioctl call returns the output of this function. -+ * -+ */ -+static long device_ioctl(struct file *file, /* see include/linux/fs.h */ -+ unsigned int ioctl_num, /* number and param for ioctl */ -+ unsigned long ioctl_param) -+{ -+ unsigned size; -+ /* -+ * Switch according to the ioctl called -+ */ -+ switch (ioctl_num) { -+ case IOCTL_MBOX_PROPERTY: -+ /* -+ * Receive a pointer to a message (in user space) and set that -+ * to be the device's message. Get the parameter given to -+ * ioctl by the process. -+ */ -+ mbox_copy_from_user(&size, (void *)ioctl_param, sizeof size); -+ return bcm_mailbox_property((void *)ioctl_param, size); -+ break; -+ default: -+ printk(KERN_ERR DRIVER_NAME "unknown ioctl: %d\n", ioctl_num); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/* Module Declarations */ -+ -+/* -+ * This structure will hold the functions to be called -+ * when a process does something to the device we -+ * created. Since a pointer to this structure is kept in -+ * the devices table, it can't be local to -+ * init_module. NULL is for unimplemented functios. -+ */ -+struct file_operations fops = { -+ .unlocked_ioctl = device_ioctl, -+ .open = device_open, -+ .release = device_release, /* a.k.a. close */ -+}; -+ -+static int bcm_vcio_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ struct vc_mailbox *mailbox; -+ -+ mailbox = kzalloc(sizeof(*mailbox), GFP_KERNEL); -+ if (NULL == mailbox) { -+ printk(KERN_ERR DRIVER_NAME ": failed to allocate " -+ "mailbox memory\n"); -+ ret = -ENOMEM; -+ } else { -+ struct resource *res; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (res == NULL) { -+ printk(KERN_ERR DRIVER_NAME ": failed to obtain memory " -+ "resource\n"); -+ ret = -ENODEV; -+ kfree(mailbox); -+ } else { -+ /* should be based on the registers from res really */ -+ mbox_init(mailbox, &pdev->dev, ARM_0_MAIL0_RD); -+ -+ platform_set_drvdata(pdev, mailbox); -+ dev_mbox_register(DRIVER_NAME, &pdev->dev); -+ -+ mbox_irqaction.dev_id = mailbox; -+ setup_irq(IRQ_ARM_MAILBOX, &mbox_irqaction); -+ printk(KERN_INFO DRIVER_NAME ": mailbox at %p\n", -+ __io_address(ARM_0_MAIL0_RD)); -+ } -+ } -+ -+ if (ret == 0) { -+ /* -+ * Register the character device -+ */ -+ ret = register_chrdev(MAJOR_NUM, DEVICE_FILE_NAME, &fops); -+ -+ /* -+ * Negative values signify an error -+ */ -+ if (ret < 0) { -+ printk(KERN_ERR DRIVER_NAME -+ "Failed registering the character device %d\n", ret); -+ return ret; -+ } -+ } -+ return ret; -+} -+ -+static int bcm_vcio_remove(struct platform_device *pdev) -+{ -+ struct vc_mailbox *mailbox = platform_get_drvdata(pdev); -+ -+ platform_set_drvdata(pdev, NULL); -+ kfree(mailbox); -+ -+ return 0; -+} -+ -+static struct platform_driver bcm_mbox_driver = { -+ .probe = bcm_vcio_probe, -+ .remove = bcm_vcio_remove, -+ -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init bcm_mbox_init(void) -+{ -+ int ret; -+ -+ printk(KERN_INFO "mailbox: Broadcom VideoCore Mailbox driver\n"); -+ -+ ret = platform_driver_register(&bcm_mbox_driver); -+ if (ret != 0) { -+ printk(KERN_ERR DRIVER_NAME ": failed to register " -+ "on platform\n"); -+ } -+ -+ return ret; -+} -+ -+static void __exit bcm_mbox_exit(void) -+{ -+ platform_driver_unregister(&bcm_mbox_driver); -+} -+ -+arch_initcall(bcm_mbox_init); /* Initialize early */ -+module_exit(bcm_mbox_exit); -+ -+MODULE_AUTHOR("Gray Girling"); -+MODULE_DESCRIPTION("ARM I/O to VideoCore processor"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:bcm-mbox"); ---- /dev/null -+++ b/arch/arm/mach-bcm2708/vc_mem.c -@@ -0,0 +1,462 @@ -+/***************************************************************************** -+* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/fs.h> -+#include <linux/device.h> -+#include <linux/cdev.h> -+#include <linux/mm.h> -+#include <linux/slab.h> -+#include <linux/proc_fs.h> -+#include <asm/uaccess.h> -+#include <linux/dma-mapping.h> -+ -+#ifdef CONFIG_ARCH_KONA -+#include <chal/chal_ipc.h> -+#elif CONFIG_ARCH_BCM2708 -+#else -+#include <csp/chal_ipc.h> -+#endif -+ -+#include "mach/vc_mem.h" -+#include <mach/vcio.h> -+ -+#define DRIVER_NAME "vc-mem" -+ -+// Uncomment to enable debug logging -+// #define ENABLE_DBG -+ -+#if defined(ENABLE_DBG) -+#define LOG_DBG( fmt, ... ) printk( KERN_INFO fmt "\n", ##__VA_ARGS__ ) -+#else -+#define LOG_DBG( fmt, ... ) -+#endif -+#define LOG_ERR( fmt, ... ) printk( KERN_ERR fmt "\n", ##__VA_ARGS__ ) -+ -+// Device (/dev) related variables -+static dev_t vc_mem_devnum = 0; -+static struct class *vc_mem_class = NULL; -+static struct cdev vc_mem_cdev; -+static int vc_mem_inited = 0; -+ -+// Proc entry -+static struct proc_dir_entry *vc_mem_proc_entry; -+ -+/* -+ * Videocore memory addresses and size -+ * -+ * Drivers that wish to know the videocore memory addresses and sizes should -+ * use these variables instead of the MM_IO_BASE and MM_ADDR_IO defines in -+ * headers. This allows the other drivers to not be tied down to a a certain -+ * address/size at compile time. -+ * -+ * In the future, the goal is to have the videocore memory virtual address and -+ * size be calculated at boot time rather than at compile time. The decision of -+ * where the videocore memory resides and its size would be in the hands of the -+ * bootloader (and/or kernel). When that happens, the values of these variables -+ * would be calculated and assigned in the init function. -+ */ -+// in the 2835 VC in mapped above ARM, but ARM has full access to VC space -+unsigned long mm_vc_mem_phys_addr = 0x00000000; -+unsigned int mm_vc_mem_size = 0; -+unsigned int mm_vc_mem_base = 0; -+ -+EXPORT_SYMBOL(mm_vc_mem_phys_addr); -+EXPORT_SYMBOL(mm_vc_mem_size); -+EXPORT_SYMBOL(mm_vc_mem_base); -+ -+static uint phys_addr = 0; -+static uint mem_size = 0; -+static uint mem_base = 0; -+ -+ -+/**************************************************************************** -+* -+* vc_mem_open -+* -+***************************************************************************/ -+ -+static int -+vc_mem_open(struct inode *inode, struct file *file) -+{ -+ (void) inode; -+ (void) file; -+ -+ LOG_DBG("%s: called file = 0x%p", __func__, file); -+ -+ return 0; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_release -+* -+***************************************************************************/ -+ -+static int -+vc_mem_release(struct inode *inode, struct file *file) -+{ -+ (void) inode; -+ (void) file; -+ -+ LOG_DBG("%s: called file = 0x%p", __func__, file); -+ -+ return 0; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_get_size -+* -+***************************************************************************/ -+ -+static void -+vc_mem_get_size(void) -+{ -+} -+ -+/**************************************************************************** -+* -+* vc_mem_get_base -+* -+***************************************************************************/ -+ -+static void -+vc_mem_get_base(void) -+{ -+} -+ -+/**************************************************************************** -+* -+* vc_mem_get_current_size -+* -+***************************************************************************/ -+ -+int -+vc_mem_get_current_size(void) -+{ -+ return mm_vc_mem_size; -+} -+ -+EXPORT_SYMBOL_GPL(vc_mem_get_current_size); -+ -+/**************************************************************************** -+* -+* vc_mem_ioctl -+* -+***************************************************************************/ -+ -+static long -+vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ int rc = 0; -+ -+ (void) cmd; -+ (void) arg; -+ -+ LOG_DBG("%s: called file = 0x%p", __func__, file); -+ -+ switch (cmd) { -+ case VC_MEM_IOC_MEM_PHYS_ADDR: -+ { -+ LOG_DBG("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p", -+ __func__, (void *) mm_vc_mem_phys_addr); -+ -+ if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr, -+ sizeof (mm_vc_mem_phys_addr)) != 0) { -+ rc = -EFAULT; -+ } -+ break; -+ } -+ case VC_MEM_IOC_MEM_SIZE: -+ { -+ // Get the videocore memory size first -+ vc_mem_get_size(); -+ -+ LOG_DBG("%s: VC_MEM_IOC_MEM_SIZE=%u", __func__, -+ mm_vc_mem_size); -+ -+ if (copy_to_user((void *) arg, &mm_vc_mem_size, -+ sizeof (mm_vc_mem_size)) != 0) { -+ rc = -EFAULT; -+ } -+ break; -+ } -+ case VC_MEM_IOC_MEM_BASE: -+ { -+ // Get the videocore memory base -+ vc_mem_get_base(); -+ -+ LOG_DBG("%s: VC_MEM_IOC_MEM_BASE=%u", __func__, -+ mm_vc_mem_base); -+ -+ if (copy_to_user((void *) arg, &mm_vc_mem_base, -+ sizeof (mm_vc_mem_base)) != 0) { -+ rc = -EFAULT; -+ } -+ break; -+ } -+ case VC_MEM_IOC_MEM_LOAD: -+ { -+ // Get the videocore memory base -+ vc_mem_get_base(); -+ -+ LOG_DBG("%s: VC_MEM_IOC_MEM_LOAD=%u", __func__, -+ mm_vc_mem_base); -+ -+ if (copy_to_user((void *) arg, &mm_vc_mem_base, -+ sizeof (mm_vc_mem_base)) != 0) { -+ rc = -EFAULT; -+ } -+ break; -+ } -+ default: -+ { -+ return -ENOTTY; -+ } -+ } -+ LOG_DBG("%s: file = 0x%p returning %d", __func__, file, rc); -+ -+ return rc; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_mmap -+* -+***************************************************************************/ -+ -+static int -+vc_mem_mmap(struct file *filp, struct vm_area_struct *vma) -+{ -+ int rc = 0; -+ unsigned long length = vma->vm_end - vma->vm_start; -+ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; -+ -+ LOG_DBG("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx", -+ __func__, (long) vma->vm_start, (long) vma->vm_end, -+ (long) vma->vm_pgoff); -+ -+ if (offset + length > mm_vc_mem_size) { -+ LOG_ERR("%s: length %ld is too big", __func__, length); -+ return -EINVAL; -+ } -+ // Do not cache the memory map -+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); -+ -+ rc = remap_pfn_range(vma, vma->vm_start, -+ (mm_vc_mem_phys_addr >> PAGE_SHIFT) + -+ vma->vm_pgoff, length, vma->vm_page_prot); -+ if (rc != 0) { -+ LOG_ERR("%s: remap_pfn_range failed (rc=%d)", __func__, rc); -+ } -+ -+ return rc; -+} -+ -+/**************************************************************************** -+* -+* File Operations for the driver. -+* -+***************************************************************************/ -+ -+static const struct file_operations vc_mem_fops = { -+ .owner = THIS_MODULE, -+ .open = vc_mem_open, -+ .release = vc_mem_release, -+ .unlocked_ioctl = vc_mem_ioctl, -+ .mmap = vc_mem_mmap, -+}; -+ -+/**************************************************************************** -+* -+* vc_mem_proc_read -+* -+***************************************************************************/ -+ -+static int -+vc_mem_proc_read(char *buf, char **start, off_t offset, int count, int *eof, -+ void *data) -+{ -+ char *p = buf; -+ -+ (void) start; -+ (void) count; -+ (void) data; -+ -+ if (offset > 0) { -+ *eof = 1; -+ return 0; -+ } -+ // Get the videocore memory size first -+ vc_mem_get_size(); -+ -+ p += sprintf(p, "Videocore memory:\n"); -+ if (mm_vc_mem_phys_addr != 0) -+ p += sprintf(p, " Physical address: 0x%p\n", -+ (void *) mm_vc_mem_phys_addr); -+ else -+ p += sprintf(p, " Physical address: 0x00000000\n"); -+ p += sprintf(p, " Length (bytes): %u\n", mm_vc_mem_size); -+ -+ *eof = 1; -+ return p - buf; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_proc_write -+* -+***************************************************************************/ -+ -+static int -+vc_mem_proc_write(struct file *file, const char __user * buffer, -+ unsigned long count, void *data) -+{ -+ int rc = -EFAULT; -+ char input_str[10]; -+ -+ memset(input_str, 0, sizeof (input_str)); -+ -+ if (count > sizeof (input_str)) { -+ LOG_ERR("%s: input string length too long", __func__); -+ goto out; -+ } -+ -+ if (copy_from_user(input_str, buffer, count - 1)) { -+ LOG_ERR("%s: failed to get input string", __func__); -+ goto out; -+ } -+ -+ if (strncmp(input_str, "connect", strlen("connect")) == 0) { -+ // Get the videocore memory size from the videocore -+ vc_mem_get_size(); -+ } -+ -+ out: -+ return rc; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_init -+* -+***************************************************************************/ -+ -+static int __init -+vc_mem_init(void) -+{ -+ int rc = -EFAULT; -+ struct device *dev; -+ -+ LOG_DBG("%s: called", __func__); -+ -+ mm_vc_mem_phys_addr = phys_addr; -+ mm_vc_mem_size = mem_size; -+ mm_vc_mem_base = mem_base; -+ -+ vc_mem_get_size(); -+ -+ printk("vc-mem: phys_addr:0x%08lx mem_base=0x%08x mem_size:0x%08x(%u MiB)\n", -+ mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024)); -+ -+ if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) { -+ LOG_ERR("%s: alloc_chrdev_region failed (rc=%d)", __func__, rc); -+ goto out_err; -+ } -+ -+ cdev_init(&vc_mem_cdev, &vc_mem_fops); -+ if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) { -+ LOG_ERR("%s: cdev_add failed (rc=%d)", __func__, rc); -+ goto out_unregister; -+ } -+ -+ vc_mem_class = class_create(THIS_MODULE, DRIVER_NAME); -+ if (IS_ERR(vc_mem_class)) { -+ rc = PTR_ERR(vc_mem_class); -+ LOG_ERR("%s: class_create failed (rc=%d)", __func__, rc); -+ goto out_cdev_del; -+ } -+ -+ dev = device_create(vc_mem_class, NULL, vc_mem_devnum, NULL, -+ DRIVER_NAME); -+ if (IS_ERR(dev)) { -+ rc = PTR_ERR(dev); -+ LOG_ERR("%s: device_create failed (rc=%d)", __func__, rc); -+ goto out_class_destroy; -+ } -+ -+#if 0 -+ vc_mem_proc_entry = create_proc_entry(DRIVER_NAME, 0444, NULL); -+ if (vc_mem_proc_entry == NULL) { -+ rc = -EFAULT; -+ LOG_ERR("%s: create_proc_entry failed", __func__); -+ goto out_device_destroy; -+ } -+ vc_mem_proc_entry->read_proc = vc_mem_proc_read; -+ vc_mem_proc_entry->write_proc = vc_mem_proc_write; -+#endif -+ -+ vc_mem_inited = 1; -+ return 0; -+ -+ out_device_destroy: -+ device_destroy(vc_mem_class, vc_mem_devnum); -+ -+ out_class_destroy: -+ class_destroy(vc_mem_class); -+ vc_mem_class = NULL; -+ -+ out_cdev_del: -+ cdev_del(&vc_mem_cdev); -+ -+ out_unregister: -+ unregister_chrdev_region(vc_mem_devnum, 1); -+ -+ out_err: -+ return -1; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_exit -+* -+***************************************************************************/ -+ -+static void __exit -+vc_mem_exit(void) -+{ -+ LOG_DBG("%s: called", __func__); -+ -+ if (vc_mem_inited) { -+#if 0 -+ remove_proc_entry(vc_mem_proc_entry->name, NULL); -+#endif -+ device_destroy(vc_mem_class, vc_mem_devnum); -+ class_destroy(vc_mem_class); -+ cdev_del(&vc_mem_cdev); -+ unregister_chrdev_region(vc_mem_devnum, 1); -+ } -+} -+ -+module_init(vc_mem_init); -+module_exit(vc_mem_exit); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Broadcom Corporation"); -+ -+module_param(phys_addr, uint, 0644); -+module_param(mem_size, uint, 0644); -+module_param(mem_base, uint, 0644); -+ ---- /dev/null -+++ b/arch/arm/mach-bcm2708/vc_support.c -@@ -0,0 +1,319 @@ -+/* -+ * vc_support.c -+ * -+ * Created on: 25 Nov 2012 -+ * Author: Simon -+ */ -+ -+#include <linux/module.h> -+#include <mach/vcio.h> -+ -+#ifdef ECLIPSE_IGNORE -+ -+#define __user -+#define __init -+#define __exit -+#define __iomem -+#define KERN_DEBUG -+#define KERN_ERR -+#define KERN_WARNING -+#define KERN_INFO -+#define _IOWR(a, b, c) b -+#define _IOW(a, b, c) b -+#define _IO(a, b) b -+ -+#endif -+ -+/****** VC MAILBOX FUNCTIONALITY ******/ -+unsigned int AllocateVcMemory(unsigned int *pHandle, unsigned int size, unsigned int alignment, unsigned int flags) -+{ -+ struct vc_msg -+ { -+ unsigned int m_msgSize; -+ unsigned int m_response; -+ -+ struct vc_tag -+ { -+ unsigned int m_tagId; -+ unsigned int m_sendBufferSize; -+ union { -+ unsigned int m_sendDataSize; -+ unsigned int m_recvDataSize; -+ }; -+ -+ struct args -+ { -+ union { -+ unsigned int m_size; -+ unsigned int m_handle; -+ }; -+ unsigned int m_alignment; -+ unsigned int m_flags; -+ } m_args; -+ } m_tag; -+ -+ unsigned int m_endTag; -+ } msg; -+ int s; -+ -+ msg.m_msgSize = sizeof(msg); -+ msg.m_response = 0; -+ msg.m_endTag = 0; -+ -+ //fill in the tag for the allocation command -+ msg.m_tag.m_tagId = 0x3000c; -+ msg.m_tag.m_sendBufferSize = 12; -+ msg.m_tag.m_sendDataSize = 12; -+ -+ //fill in our args -+ msg.m_tag.m_args.m_size = size; -+ msg.m_tag.m_args.m_alignment = alignment; -+ msg.m_tag.m_args.m_flags = flags; -+ -+ //run the command -+ s = bcm_mailbox_property(&msg, sizeof(msg)); -+ -+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004) -+ { -+ *pHandle = msg.m_tag.m_args.m_handle; -+ return 0; -+ } -+ else -+ { -+ printk(KERN_ERR "failed to allocate vc memory: s=%d response=%08x recv data size=%08x\n", -+ s, msg.m_response, msg.m_tag.m_recvDataSize); -+ return 1; -+ } -+} -+ -+unsigned int ReleaseVcMemory(unsigned int handle) -+{ -+ struct vc_msg -+ { -+ unsigned int m_msgSize; -+ unsigned int m_response; -+ -+ struct vc_tag -+ { -+ unsigned int m_tagId; -+ unsigned int m_sendBufferSize; -+ union { -+ unsigned int m_sendDataSize; -+ unsigned int m_recvDataSize; -+ }; -+ -+ struct args -+ { -+ union { -+ unsigned int m_handle; -+ unsigned int m_error; -+ }; -+ } m_args; -+ } m_tag; -+ -+ unsigned int m_endTag; -+ } msg; -+ int s; -+ -+ msg.m_msgSize = sizeof(msg); -+ msg.m_response = 0; -+ msg.m_endTag = 0; -+ -+ //fill in the tag for the release command -+ msg.m_tag.m_tagId = 0x3000f; -+ msg.m_tag.m_sendBufferSize = 4; -+ msg.m_tag.m_sendDataSize = 4; -+ -+ //pass across the handle -+ msg.m_tag.m_args.m_handle = handle; -+ -+ s = bcm_mailbox_property(&msg, sizeof(msg)); -+ -+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004 && msg.m_tag.m_args.m_error == 0) -+ return 0; -+ else -+ { -+ printk(KERN_ERR "failed to release vc memory: s=%d response=%08x recv data size=%08x error=%08x\n", -+ s, msg.m_response, msg.m_tag.m_recvDataSize, msg.m_tag.m_args.m_error); -+ return 1; -+ } -+} -+ -+unsigned int LockVcMemory(unsigned int *pBusAddress, unsigned int handle) -+{ -+ struct vc_msg -+ { -+ unsigned int m_msgSize; -+ unsigned int m_response; -+ -+ struct vc_tag -+ { -+ unsigned int m_tagId; -+ unsigned int m_sendBufferSize; -+ union { -+ unsigned int m_sendDataSize; -+ unsigned int m_recvDataSize; -+ }; -+ -+ struct args -+ { -+ union { -+ unsigned int m_handle; -+ unsigned int m_busAddress; -+ }; -+ } m_args; -+ } m_tag; -+ -+ unsigned int m_endTag; -+ } msg; -+ int s; -+ -+ msg.m_msgSize = sizeof(msg); -+ msg.m_response = 0; -+ msg.m_endTag = 0; -+ -+ //fill in the tag for the lock command -+ msg.m_tag.m_tagId = 0x3000d; -+ msg.m_tag.m_sendBufferSize = 4; -+ msg.m_tag.m_sendDataSize = 4; -+ -+ //pass across the handle -+ msg.m_tag.m_args.m_handle = handle; -+ -+ s = bcm_mailbox_property(&msg, sizeof(msg)); -+ -+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004) -+ { -+ //pick out the bus address -+ *pBusAddress = msg.m_tag.m_args.m_busAddress; -+ return 0; -+ } -+ else -+ { -+ printk(KERN_ERR "failed to lock vc memory: s=%d response=%08x recv data size=%08x\n", -+ s, msg.m_response, msg.m_tag.m_recvDataSize); -+ return 1; -+ } -+} -+ -+unsigned int UnlockVcMemory(unsigned int handle) -+{ -+ struct vc_msg -+ { -+ unsigned int m_msgSize; -+ unsigned int m_response; -+ -+ struct vc_tag -+ { -+ unsigned int m_tagId; -+ unsigned int m_sendBufferSize; -+ union { -+ unsigned int m_sendDataSize; -+ unsigned int m_recvDataSize; -+ }; -+ -+ struct args -+ { -+ union { -+ unsigned int m_handle; -+ unsigned int m_error; -+ }; -+ } m_args; -+ } m_tag; -+ -+ unsigned int m_endTag; -+ } msg; -+ int s; -+ -+ msg.m_msgSize = sizeof(msg); -+ msg.m_response = 0; -+ msg.m_endTag = 0; -+ -+ //fill in the tag for the unlock command -+ msg.m_tag.m_tagId = 0x3000e; -+ msg.m_tag.m_sendBufferSize = 4; -+ msg.m_tag.m_sendDataSize = 4; -+ -+ //pass across the handle -+ msg.m_tag.m_args.m_handle = handle; -+ -+ s = bcm_mailbox_property(&msg, sizeof(msg)); -+ -+ //check the error code too -+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004 && msg.m_tag.m_args.m_error == 0) -+ return 0; -+ else -+ { -+ printk(KERN_ERR "failed to unlock vc memory: s=%d response=%08x recv data size=%08x error%08x\n", -+ s, msg.m_response, msg.m_tag.m_recvDataSize, msg.m_tag.m_args.m_error); -+ return 1; -+ } -+} -+ -+unsigned int ExecuteVcCode(unsigned int code, -+ unsigned int r0, unsigned int r1, unsigned int r2, unsigned int r3, unsigned int r4, unsigned int r5) -+{ -+ struct vc_msg -+ { -+ unsigned int m_msgSize; -+ unsigned int m_response; -+ -+ struct vc_tag -+ { -+ unsigned int m_tagId; -+ unsigned int m_sendBufferSize; -+ union { -+ unsigned int m_sendDataSize; -+ unsigned int m_recvDataSize; -+ }; -+ -+ struct args -+ { -+ union { -+ unsigned int m_pCode; -+ unsigned int m_return; -+ }; -+ unsigned int m_r0; -+ unsigned int m_r1; -+ unsigned int m_r2; -+ unsigned int m_r3; -+ unsigned int m_r4; -+ unsigned int m_r5; -+ } m_args; -+ } m_tag; -+ -+ unsigned int m_endTag; -+ } msg; -+ int s; -+ -+ msg.m_msgSize = sizeof(msg); -+ msg.m_response = 0; -+ msg.m_endTag = 0; -+ -+ //fill in the tag for the unlock command -+ msg.m_tag.m_tagId = 0x30010; -+ msg.m_tag.m_sendBufferSize = 28; -+ msg.m_tag.m_sendDataSize = 28; -+ -+ //pass across the handle -+ msg.m_tag.m_args.m_pCode = code; -+ msg.m_tag.m_args.m_r0 = r0; -+ msg.m_tag.m_args.m_r1 = r1; -+ msg.m_tag.m_args.m_r2 = r2; -+ msg.m_tag.m_args.m_r3 = r3; -+ msg.m_tag.m_args.m_r4 = r4; -+ msg.m_tag.m_args.m_r5 = r5; -+ -+ s = bcm_mailbox_property(&msg, sizeof(msg)); -+ -+ //check the error code too -+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004) -+ return msg.m_tag.m_args.m_return; -+ else -+ { -+ printk(KERN_ERR "failed to execute: s=%d response=%08x recv data size=%08x\n", -+ s, msg.m_response, msg.m_tag.m_recvDataSize); -+ return 1; -+ } -+} -+ ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -144,6 +144,7 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x0020 - # by CONFIG_* macro name. - machine-$(CONFIG_ARCH_AT91) += at91 - machine-$(CONFIG_ARCH_BCM) += bcm -+machine-$(CONFIG_ARCH_BCM2708) += bcm2708 - machine-$(CONFIG_ARCH_BCM2835) += bcm2835 - machine-$(CONFIG_ARCH_CLPS711X) += clps711x - machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx ---- a/arch/arm/mm/Kconfig -+++ b/arch/arm/mm/Kconfig -@@ -358,7 +358,7 @@ config CPU_PJ4B - - # ARMv6 - config CPU_V6 -- bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX -+ bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || MACH_BCM2708 - select CPU_32v6 - select CPU_ABRT_EV6 - select CPU_CACHE_V6 ---- a/arch/arm/mm/proc-v6.S -+++ b/arch/arm/mm/proc-v6.S -@@ -73,10 +73,19 @@ ENDPROC(cpu_v6_reset) - * - * IRQs are already disabled. - */ -+ -+/* See jira SW-5991 for details of this workaround */ - ENTRY(cpu_v6_do_idle) -- mov r1, #0 -- mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode -- mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt -+ .align 5 -+ mov r1, #2 -+1: subs r1, #1 -+ nop -+ mcreq p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode -+ mcreq p15, 0, r1, c7, c0, 4 @ wait for interrupt -+ nop -+ nop -+ nop -+ bne 1b - mov pc, lr - - ENTRY(cpu_v6_dcache_clean_area) ---- a/arch/arm/tools/mach-types -+++ b/arch/arm/tools/mach-types -@@ -522,6 +522,7 @@ torbreck MACH_TORBRECK TORBRECK 3090 - prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103 - paz00 MACH_PAZ00 PAZ00 3128 - acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129 -+bcm2708 MACH_BCM2708 BCM2708 3138 - ag5evm MACH_AG5EVM AG5EVM 3189 - ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 - wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 |