brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 14 insertions, 3 deletions

diff --git a/target/linux/brcm2708/image/Makefile b/target/linux/brcm2708/image/Makefile
index b9dfa8f21f..f2d8cec326 100644
--- a/target/linux/brcm2708/image/Makefile
+++ b/target/linux/brcm2708/image/Makefile
@@ -59,7 +59,11 @@ endef
 define Device/rpi
   DEVICE_TITLE := Raspberry Pi B/B+/CM/Zero/ZeroW
   DEVICE_DTS := bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm bcm2708-rpi-0-w
-  SUPPORTED_DEVICES := rpi-b rpi-b-plus rpi-cm rpi-zero rpi-zero-w raspberrypi,model-b raspberrypi,model-b-plus raspberrypi,compute-module-1 raspberrypi,model-b-rev2 raspberrypi,model-zero raspberrypi,model-zero-w
+  SUPPORTED_DEVICES := \
+	rpi-b rpi-b-plus rpi-cm rpi-zero rpi-zero-w \
+	raspberrypi,model-b raspberrypi,model-b-plus raspberrypi,model-b-rev2 \
+	raspberrypi,compute-module raspberrypi,compute-module-1 \
+	raspberrypi,model-zero raspberrypi,model-zero-w
   DEVICE_PACKAGES := brcmfmac-firmware-43430-sdio brcmfmac-board-rpi2 kmod-brcmfmac wpad-basic
 endef
 ifeq ($(SUBTARGET),bcm2708)
@@ -69,7 +73,11 @@ endif
 define Device/rpi-2
   DEVICE_TITLE := Raspberry Pi 2B/3B/3B+/3CM
   DEVICE_DTS := bcm2709-rpi-2-b bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3
-  SUPPORTED_DEVICES := rpi-2-b rpi-3-b rpi-3-b-plus rpi-cm raspberrypi,2-model-b raspberrypi,3-model-b raspberrypi,3-model-b-plus raspberrypi,compute-module-3
+  SUPPORTED_DEVICES := \
+	rpi-2-b rpi-3-b rpi-3-b-plus rpi-cm \
+	raspberrypi,2-model-b \
+	raspberrypi,3-model-b raspberrypi,3-model-b-plus \
+	raspberrypi,3-compute-module raspberrypi,compute-module-3
   DEVICE_PACKAGES := brcmfmac-firmware-43430-sdio brcmfmac-firmware-43455-sdio brcmfmac-board-rpi2 brcmfmac-board-rpi3 kmod-brcmfmac wpad-basic
 endef
 ifeq ($(SUBTARGET),bcm2709)
@@ -80,7 +88,10 @@ define Device/rpi-3
   KERNEL_IMG := kernel8.img
   DEVICE_TITLE := Raspberry Pi 3B/3B+
   DEVICE_DTS := broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus
-  SUPPORTED_DEVICES := rpi-3-b rpi-3-b-plus raspberrypi,3-model-b raspberrypi,3-model-b-plus
+  SUPPORTED_DEVICES := \
+	rpi-3-b rpi-3-b-plus \
+	raspberrypi,3-model-b raspberrypi,3-model-b-plus \
+	raspberrypi,3-compute-module raspberrypi,compute-module-3
   DEVICE_PACKAGES := brcmfmac-firmware-43430-sdio brcmfmac-board-rpi2 brcmfmac-firmware-43455-sdio brcmfmac-board-rpi3 kmod-brcmfmac wpad-basic
 endef
 ifeq ($(SUBTARGET),bcm2710)