aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm-2.4/patches/001-bcm47xx.patch
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2006-10-13 22:51:49 +0200
committerFelix Fietkau <nbd@openwrt.org>2016-03-20 17:29:15 +0100
commit60c1f0f64d23003a19a07d6b9638542130f6641d (patch)
tree8fb2787f4c49baded97cd55e0c371fe1cffce2b6 /target/linux/brcm-2.4/patches/001-bcm47xx.patch
parentd58a09110ccfa95f06c983fe796806f2e035c9d2 (diff)
parentb3ce218b51746d3a576221ea542facf3a1703ab2 (diff)
downloadupstream-60c1f0f64d23003a19a07d6b9638542130f6641d.tar.gz
upstream-60c1f0f64d23003a19a07d6b9638542130f6641d.tar.bz2
upstream-60c1f0f64d23003a19a07d6b9638542130f6641d.zip
finally move buildroot-ng to trunk
Diffstat (limited to 'target/linux/brcm-2.4/patches/001-bcm47xx.patch')
-rw-r--r--target/linux/brcm-2.4/patches/001-bcm47xx.patch16794
1 files changed, 16794 insertions, 0 deletions
diff --git a/target/linux/brcm-2.4/patches/001-bcm47xx.patch b/target/linux/brcm-2.4/patches/001-bcm47xx.patch
new file mode 100644
index 0000000000..726eba8061
--- /dev/null
+++ b/target/linux/brcm-2.4/patches/001-bcm47xx.patch
@@ -0,0 +1,16794 @@
+diff -urN linux.old/arch/mips/bcm947xx/bcmsrom.c linux.dev/arch/mips/bcm947xx/bcmsrom.c
+--- linux.old/arch/mips/bcm947xx/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/bcmsrom.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,1212 @@
++/*
++ * Misc useful routines to access NIC SROM/OTP .
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id: bcmsrom.c,v 1.1.1.14 2006/04/15 01:28:25 michael Exp $
++ */
++
++#include <typedefs.h>
++#include <bcmdefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <bcmsrom.h>
++#include <bcmdevs.h>
++#include <bcmendian.h>
++#include <sbpcmcia.h>
++#include <pcicfg.h>
++#include <sbutils.h>
++#include <bcmnvram.h>
++
++/* debug/trace */
++#if defined(WLTEST)
++#define BS_ERROR(args) printf args
++#else
++#define BS_ERROR(args)
++#endif /* BCMDBG_ERR || WLTEST */
++
++#define VARS_MAX 4096 /* should be reduced */
++
++#define WRITE_ENABLE_DELAY 500 /* 500 ms after write enable/disable toggle */
++#define WRITE_WORD_DELAY 20 /* 20 ms between each word write */
++
++static int initvars_srom_pci(void *sbh, void *curmap, char **vars, uint *count);
++static int initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, uint *count);
++static int initvars_flash_sb(void *sbh, char **vars, uint *count);
++static int srom_parsecis(osl_t *osh, uint8 **pcis, uint ciscnt, char **vars, uint *count);
++static int sprom_cmd_pcmcia(osl_t *osh, uint8 cmd);
++static int sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data);
++static int sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data);
++static int sprom_read_pci(osl_t *osh, uint16 *sprom, uint wordoff, uint16 *buf, uint nwords,
++ bool check_crc);
++
++static int initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count);
++static int initvars_flash(osl_t *osh, char **vp, uint len, char *devpath);
++
++/*
++ * Initialize local vars from the right source for this platform.
++ * Return 0 on success, nonzero on error.
++ */
++int
++srom_var_init(void *sbh, uint bustype, void *curmap, osl_t *osh, char **vars, uint *count)
++{
++ ASSERT(bustype == BUSTYPE(bustype));
++ if (vars == NULL || count == NULL)
++ return (0);
++
++ switch (BUSTYPE(bustype)) {
++ case SB_BUS:
++ case JTAG_BUS:
++ return initvars_flash_sb(sbh, vars, count);
++
++ case PCI_BUS:
++ ASSERT(curmap); /* can not be NULL */
++ return initvars_srom_pci(sbh, curmap, vars, count);
++
++ case PCMCIA_BUS:
++ return initvars_cis_pcmcia(sbh, osh, vars, count);
++
++
++ default:
++ ASSERT(0);
++ }
++ return (-1);
++}
++
++/* support only 16-bit word read from srom */
++int
++srom_read(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf)
++{
++ void *srom;
++ uint i, off, nw;
++
++ ASSERT(bustype == BUSTYPE(bustype));
++
++ /* check input - 16-bit access only */
++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
++ return 1;
++
++ off = byteoff / 2;
++ nw = nbytes / 2;
++
++ if (BUSTYPE(bustype) == PCI_BUS) {
++ if (!curmap)
++ return 1;
++ srom = (uchar*)curmap + PCI_BAR0_SPROM_OFFSET;
++ if (sprom_read_pci(osh, srom, off, buf, nw, FALSE))
++ return 1;
++ } else if (BUSTYPE(bustype) == PCMCIA_BUS) {
++ for (i = 0; i < nw; i++) {
++ if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i)))
++ return 1;
++ }
++ } else {
++ return 1;
++ }
++
++ return 0;
++}
++
++/* support only 16-bit word write into srom */
++int
++srom_write(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf)
++{
++ uint16 *srom;
++ uint i, nw, crc_range;
++ uint16 image[SPROM_SIZE];
++ uint8 crc;
++ volatile uint32 val32;
++
++ ASSERT(bustype == BUSTYPE(bustype));
++
++ /* check input - 16-bit access only */
++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
++ return 1;
++
++ /* Are we writing the whole thing at once? */
++ if ((byteoff == 0) &&
++ ((nbytes == SPROM_SIZE) ||
++ (nbytes == (SPROM_CRC_RANGE * 2)) ||
++ (nbytes == (SROM4_WORDS * 2)))) {
++ crc_range = nbytes;
++ bcopy((void*)buf, (void*)image, nbytes);
++ nw = nbytes / 2;
++ } else {
++ if ((BUSTYPE(bustype) == PCMCIA_BUS) || (BUSTYPE(bustype) == SDIO_BUS))
++ crc_range = SPROM_SIZE;
++ else
++ crc_range = SPROM_CRC_RANGE * 2; /* Tentative */
++
++ nw = crc_range / 2;
++ /* read first 64 words from srom */
++ if (srom_read(bustype, curmap, osh, 0, nw * 2, image))
++ return 1;
++ if (image[SROM4_SIGN] == SROM4_SIGNATURE) {
++ crc_range = SROM4_WORDS;
++ nw = crc_range / 2;
++ if (srom_read(bustype, curmap, osh, 0, nw * 2, image))
++ return 1;
++ }
++ /* make changes */
++ bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes);
++ }
++
++ /* calculate crc */
++ htol16_buf(image, crc_range);
++ crc = ~hndcrc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE);
++ ltoh16_buf(image, crc_range);
++ image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff);
++
++ if (BUSTYPE(bustype) == PCI_BUS) {
++ srom = (uint16*)((uchar*)curmap + PCI_BAR0_SPROM_OFFSET);
++ /* enable writes to the SPROM */
++ val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32));
++ val32 |= SPROM_WRITEEN;
++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32);
++ bcm_mdelay(WRITE_ENABLE_DELAY);
++ /* write srom */
++ for (i = 0; i < nw; i++) {
++ W_REG(osh, &srom[i], image[i]);
++ bcm_mdelay(WRITE_WORD_DELAY);
++ }
++ /* disable writes to the SPROM */
++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 &
++ ~SPROM_WRITEEN);
++ } else if (BUSTYPE(bustype) == PCMCIA_BUS) {
++ /* enable writes to the SPROM */
++ if (sprom_cmd_pcmcia(osh, SROM_WEN))
++ return 1;
++ bcm_mdelay(WRITE_ENABLE_DELAY);
++ /* write srom */
++ for (i = 0; i < nw; i++) {
++ sprom_write_pcmcia(osh, (uint16)(i), image[i]);
++ bcm_mdelay(WRITE_WORD_DELAY);
++ }
++ /* disable writes to the SPROM */
++ if (sprom_cmd_pcmcia(osh, SROM_WDS))
++ return 1;
++ } else {
++ return 1;
++ }
++
++ bcm_mdelay(WRITE_ENABLE_DELAY);
++ return 0;
++}
++
++
++static int
++srom_parsecis(osl_t *osh, uint8 **pcis, uint ciscnt, char **vars, uint *count)
++{
++ char eabuf[32];
++ char *vp, *base;
++ uint8 *cis, tup, tlen, sromrev = 1;
++ int i, j;
++ uint varsize;
++ bool ag_init = FALSE;
++ uint32 w32;
++
++ ASSERT(vars);
++ ASSERT(count);
++
++ base = vp = MALLOC(osh, VARS_MAX);
++ ASSERT(vp);
++ if (!vp)
++ return -2;
++
++ while (ciscnt--) {
++ cis = *pcis++;
++ i = 0;
++ do {
++ tup = cis[i++];
++ tlen = cis[i++];
++ if ((i + tlen) >= CIS_SIZE)
++ break;
++
++ switch (tup) {
++ case CISTPL_MANFID:
++ vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]);
++ vp++;
++ vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]);
++ vp++;
++ break;
++
++ case CISTPL_FUNCE:
++ switch (cis[i]) {
++ case LAN_NID:
++ ASSERT(cis[i + 1] == 6);
++ bcm_ether_ntoa((struct ether_addr *)&cis[i + 2], eabuf);
++ vp += sprintf(vp, "il0macaddr=%s", eabuf);
++ vp++;
++ break;
++ case 1: /* SDIO Extended Data */
++ vp += sprintf(vp, "sdmaxblk=%d",
++ (cis[i + 13] << 8) | cis[i + 12]);
++ vp++;
++ break;
++ }
++ break;
++
++ case CISTPL_CFTABLE:
++ vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]);
++ vp++;
++ break;
++
++ case CISTPL_BRCM_HNBU:
++ switch (cis[i]) {
++ case HNBU_SROMREV:
++ sromrev = cis[i + 1];
++ break;
++
++ case HNBU_CHIPID:
++ vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) +
++ cis[i + 1]);
++ vp++;
++ vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) +
++ cis[i + 3]);
++ vp++;
++ if (tlen == 7) {
++ vp += sprintf(vp, "chiprev=%d",
++ (cis[i + 6] << 8) + cis[i + 5]);
++ vp++;
++ }
++ break;
++
++ case HNBU_BOARDREV:
++ vp += sprintf(vp, "boardrev=%d", cis[i + 1]);
++ vp++;
++ break;
++
++ case HNBU_AA:
++ vp += sprintf(vp, "aa2g=%d", cis[i + 1]);
++ vp++;
++ break;
++
++ case HNBU_AG:
++ vp += sprintf(vp, "ag0=%d", cis[i + 1]);
++ vp++;
++ ag_init = TRUE;
++ break;
++
++ case HNBU_CC:
++ ASSERT(sromrev == 1);
++ vp += sprintf(vp, "cc=%d", cis[i + 1]);
++ vp++;
++ break;
++
++ case HNBU_PAPARMS:
++ if (tlen == 2) {
++ ASSERT(sromrev == 1);
++ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 1]);
++ vp++;
++ } else if (tlen >= 9) {
++ if (tlen == 10) {
++ ASSERT(sromrev == 2);
++ vp += sprintf(vp, "opo=%d", cis[i + 9]);
++ vp++;
++ } else
++ ASSERT(tlen == 9);
++
++ for (j = 0; j < 3; j++) {
++ vp += sprintf(vp, "pa0b%d=%d", j,
++ (cis[i + (j * 2) + 2] << 8) +
++ cis[i + (j * 2) + 1]);
++ vp++;
++ }
++ vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]);
++ vp++;
++ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 8]);
++ vp++;
++ } else
++ ASSERT(tlen >= 9);
++ break;
++
++ case HNBU_OEM:
++ ASSERT(sromrev == 1);
++ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
++ cis[i + 1], cis[i + 2],
++ cis[i + 3], cis[i + 4],
++ cis[i + 5], cis[i + 6],
++ cis[i + 7], cis[i + 8]);
++ vp++;
++ break;
++
++ case HNBU_BOARDFLAGS:
++ w32 = (cis[i + 2] << 8) + cis[i + 1];
++ if (tlen == 5)
++ w32 |= (cis[i + 4] << 24) + (cis[i + 3] << 16);
++ vp += sprintf(vp, "boardflags=0x%x", w32);
++ vp++;
++ break;
++
++ case HNBU_LEDS:
++ if (cis[i + 1] != 0xff) {
++ vp += sprintf(vp, "ledbh0=%d", cis[i + 1]);
++ vp++;
++ }
++ if (cis[i + 2] != 0xff) {
++ vp += sprintf(vp, "ledbh1=%d", cis[i + 2]);
++ vp++;
++ }
++ if (cis[i + 3] != 0xff) {
++ vp += sprintf(vp, "ledbh2=%d", cis[i + 3]);
++ vp++;
++ }
++ if (cis[i + 4] != 0xff) {
++ vp += sprintf(vp, "ledbh3=%d", cis[i + 4]);
++ vp++;
++ }
++ break;
++
++ case HNBU_CCODE:
++ {
++ char str[3];
++ ASSERT(sromrev > 1);
++ str[0] = cis[i + 1];
++ str[1] = cis[i + 2];
++ str[2] = 0;
++ vp += sprintf(vp, "ccode=%s", str);
++ vp++;
++ vp += sprintf(vp, "cctl=0x%x", cis[i + 3]);
++ vp++;
++ break;
++ }
++
++ case HNBU_CCKPO:
++ ASSERT(sromrev > 2);
++ vp += sprintf(vp, "cckpo=0x%x",
++ (cis[i + 2] << 8) | cis[i + 1]);
++ vp++;
++ break;
++
++ case HNBU_OFDMPO:
++ ASSERT(sromrev > 2);
++ vp += sprintf(vp, "ofdmpo=0x%x",
++ (cis[i + 4] << 24) |
++ (cis[i + 3] << 16) |
++ (cis[i + 2] << 8) |
++ cis[i + 1]);
++ vp++;
++ break;
++ }
++ break;
++
++ }
++ i += tlen;
++ } while (tup != 0xff);
++ }
++
++ /* Set the srom version */
++ vp += sprintf(vp, "sromrev=%d", sromrev);
++ vp++;
++
++ /* if there is no antenna gain field, set default */
++ if (ag_init == FALSE) {
++ ASSERT(sromrev == 1);
++ vp += sprintf(vp, "ag0=%d", 0xff);
++ vp++;
++ }
++
++ /* final nullbyte terminator */
++ *vp++ = '\0';
++ varsize = (uint)(vp - base);
++
++ ASSERT((vp - base) < VARS_MAX);
++
++ if (varsize == VARS_MAX) {
++ *vars = base;
++ } else {
++ vp = MALLOC(osh, varsize);
++ ASSERT(vp);
++ if (vp)
++ bcopy(base, vp, varsize);
++ MFREE(osh, base, VARS_MAX);
++ *vars = vp;
++ if (!vp) {
++ *count = 0;
++ return -2;
++ }
++ }
++ *count = varsize;
++
++ return (0);
++}
++
++
++/* set PCMCIA sprom command register */
++static int
++sprom_cmd_pcmcia(osl_t *osh, uint8 cmd)
++{
++ uint8 status = 0;
++ uint wait_cnt = 1000;
++
++ /* write sprom command register */
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1);
++
++ /* wait status */
++ while (wait_cnt--) {
++ OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1);
++ if (status & SROM_DONE)
++ return 0;
++ }
++
++ return 1;
++}
++
++/* read a word from the PCMCIA srom */
++static int
++sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data)
++{
++ uint8 addr_l, addr_h, data_l, data_h;
++
++ addr_l = (uint8)((addr * 2) & 0xff);
++ addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
++
++ /* set address */
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
++
++ /* do read */
++ if (sprom_cmd_pcmcia(osh, SROM_READ))
++ return 1;
++
++ /* read data */
++ data_h = data_l = 0;
++ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1);
++ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1);
++
++ *data = (data_h << 8) | data_l;
++ return 0;
++}
++
++/* write a word to the PCMCIA srom */
++static int
++sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data)
++{
++ uint8 addr_l, addr_h, data_l, data_h;
++
++ addr_l = (uint8)((addr * 2) & 0xff);
++ addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
++ data_l = (uint8)(data & 0xff);
++ data_h = (uint8)((data >> 8) & 0xff);
++
++ /* set address */
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
++
++ /* write data */
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1);
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1);
++
++ /* do write */
++ return sprom_cmd_pcmcia(osh, SROM_WRITE);
++}
++
++/*
++ * Read in and validate sprom.
++ * Return 0 on success, nonzero on error.
++ */
++static int
++sprom_read_pci(osl_t *osh, uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc)
++{
++ int err = 0;
++ uint i;
++
++ /* read the sprom */
++ for (i = 0; i < nwords; i++)
++ buf[i] = R_REG(osh, &sprom[wordoff + i]);
++
++ if (check_crc) {
++ /* fixup the endianness so crc8 will pass */
++ htol16_buf(buf, nwords * 2);
++ if (hndcrc8((uint8*)buf, nwords * 2, CRC8_INIT_VALUE) != CRC8_GOOD_VALUE)
++ err = 1;
++ /* now correct the endianness of the byte array */
++ ltoh16_buf(buf, nwords * 2);
++ }
++
++ return err;
++}
++
++/*
++* Create variable table from memory.
++* Return 0 on success, nonzero on error.
++*/
++static int
++initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count)
++{
++ int c = (int)(end - start);
++
++ /* do it only when there is more than just the null string */
++ if (c > 1) {
++ char *vp = MALLOC(osh, c);
++ ASSERT(vp);
++ if (!vp)
++ return BCME_NOMEM;
++ bcopy(start, vp, c);
++ *vars = vp;
++ *count = c;
++ }
++ else {
++ *vars = NULL;
++ *count = 0;
++ }
++
++ return 0;
++}
++
++/*
++ * Find variables with <devpath> from flash. 'base' points to the beginning
++ * of the table upon enter and to the end of the table upon exit when success.
++ * Return 0 on success, nonzero on error.
++ */
++static int
++initvars_flash(osl_t *osh, char **base, uint len, char *devpath)
++{
++ char *vp = *base;
++ char *flash;
++ int err;
++ char *s;
++ uint l, dl, copy_len;
++
++ /* allocate memory and read in flash */
++ if (!(flash = MALLOC(osh, NVRAM_SPACE)))
++ return BCME_NOMEM;
++ if ((err = nvram_getall(flash, NVRAM_SPACE)))
++ goto exit;
++
++ /* grab vars with the <devpath> prefix in name */
++ dl = strlen(devpath);
++ for (s = flash; s && *s; s += l + 1) {
++ l = strlen(s);
++
++ /* skip non-matching variable */
++ if (strncmp(s, devpath, dl))
++ continue;
++
++ /* is there enough room to copy? */
++ copy_len = l - dl + 1;
++ if (len < copy_len) {
++ err = BCME_BUFTOOSHORT;
++ goto exit;
++ }
++
++ /* no prefix, just the name=value */
++ strcpy(vp, &s[dl]);
++ vp += copy_len;
++ len -= copy_len;
++ }
++
++ /* add null string as terminator */
++ if (len < 1) {
++ err = BCME_BUFTOOSHORT;
++ goto exit;
++ }
++ *vp++ = '\0';
++
++ *base = vp;
++
++exit: MFREE(osh, flash, NVRAM_SPACE);
++ return err;
++}
++
++/*
++ * Initialize nonvolatile variable table from flash.
++ * Return 0 on success, nonzero on error.
++ */
++static int
++initvars_flash_sb(void *sbh, char **vars, uint *count)
++{
++ osl_t *osh = sb_osh(sbh);
++ char devpath[SB_DEVPATH_BUFSZ];
++ char *vp, *base;
++ int err;
++
++ ASSERT(vars);
++ ASSERT(count);
++
++ if ((err = sb_devpath(sbh, devpath, sizeof(devpath))))
++ return err;
++
++ base = vp = MALLOC(osh, VARS_MAX);
++ ASSERT(vp);
++ if (!vp)
++ return BCME_NOMEM;
++
++ if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath)))
++ goto err;
++
++ err = initvars_table(osh, base, vp, vars, count);
++
++err: MFREE(osh, base, VARS_MAX);
++ return err;
++}
++
++#ifdef WLTEST
++char mfgsromvars[256];
++char *defaultsromvars = "il0macaddr=00:11:22:33:44:51\0"
++ "et0macaddr=00:11:22:33:44:52\0"
++ "et1macaddr=00:11:22:33:44:53\0"
++ "boardtype=0xffff\0"
++ "boardrev=0x10\0"
++ "boardflags=8\0"
++ "sromrev=2\0"
++ "aa2g=3";
++#define MFGSROM_DEFVARSLEN 147 /* default srom len */
++#endif /* WL_TEST */
++
++/*
++ * Initialize nonvolatile variable table from sprom.
++ * Return 0 on success, nonzero on error.
++ */
++static int
++initvars_srom_pci(void *sbh, void *curmap, char **vars, uint *count)
++{
++ uint16 w, *b;
++ uint8 sromrev = 0;
++ struct ether_addr ea;
++ char eabuf[32];
++ uint32 w32;
++ int woff, i;
++ char *vp, *base;
++ osl_t *osh = sb_osh(sbh);
++ bool flash = FALSE;
++ char name[SB_DEVPATH_BUFSZ+16], *value;
++ char devpath[SB_DEVPATH_BUFSZ];
++ int err;
++
++ /*
++ * Apply CRC over SROM content regardless SROM is present or not,
++ * and use variable <devpath>sromrev's existance in flash to decide
++ * if we should return an error when CRC fails or read SROM variables
++ * from flash.
++ */
++ b = MALLOC(osh, SROM_MAX);
++ ASSERT(b);
++ if (!b)
++ return -2;
++
++ err = sprom_read_pci(osh, (void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b,
++ 64, TRUE);
++ if (err == 0) {
++ /* srom is good and is rev < 4 */
++ /* top word of sprom contains version and crc8 */
++ sromrev = b[63] & 0xff;
++ /* bcm4401 sroms misprogrammed */
++ if (sromrev == 0x10)
++ sromrev = 1;
++ } else if (b[SROM4_SIGN] == SROM4_SIGNATURE) {
++ /* If sromrev >= 4, read more */
++ err = sprom_read_pci(osh, (void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b,
++ SROM4_WORDS, TRUE);
++ sromrev = b[SROM4_WORDS - 1] & 0xff;
++ }
++
++ if (err) {
++#ifdef WLTEST
++ BS_ERROR(("SROM Crc Error, so see if we could use a default\n"));
++ w32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32));
++ if (w32 & SPROM_OTPIN_USE) {
++ BS_ERROR(("srom crc failed with OTP, use default vars....\n"));
++ vp = base = mfgsromvars;
++ if (sb_chip(sbh) == BCM4311_CHIP_ID) {
++ BS_ERROR(("setting the devid to be 4311\n"));
++ vp += sprintf(vp, "devid=0x4311");
++ vp++;
++ }
++ bcopy(defaultsromvars, vp, MFGSROM_DEFVARSLEN);
++ vp += MFGSROM_DEFVARSLEN;
++ goto varsdone;
++ } else {
++ BS_ERROR(("srom crc failed with SPROM....\n"));
++#endif /* WLTEST */
++ if ((err = sb_devpath(sbh, devpath, sizeof(devpath))))
++ return err;
++ sprintf(name, "%ssromrev", devpath);
++ if (!(value = getvar(NULL, name)))
++ return (-1);
++ sromrev = (uint8)bcm_strtoul(value, NULL, 0);
++ flash = TRUE;
++#ifdef WLTEST
++ }
++#endif /* WLTEST */
++ }
++
++ /* srom version check */
++ if (sromrev > 4)
++ return (-2);
++
++ ASSERT(vars);
++ ASSERT(count);
++
++ base = vp = MALLOC(osh, VARS_MAX);
++ ASSERT(vp);
++ if (!vp)
++ return -2;
++
++ /* read variables from flash */
++ if (flash) {
++ if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath)))
++ goto err;
++ goto varsdone;
++ }
++
++ vp += sprintf(vp, "sromrev=%d", sromrev);
++ vp++;
++
++ if (sromrev >= 4) {
++ uint path, pathbase;
++ const uint pathbases[MAX_PATH] = {SROM4_PATH0, SROM4_PATH1,
++ SROM4_PATH2, SROM4_PATH3};
++
++ vp += sprintf(vp, "boardrev=%d", b[SROM4_BREV]);
++ vp++;
++
++ vp += sprintf(vp, "boardflags=%d", (b[SROM4_BFL1] << 16) | b[SROM4_BFL0]);
++ vp++;
++
++ vp += sprintf(vp, "boardflags2=%d", (b[SROM4_BFL3] << 16) | b[SROM4_BFL2]);
++ vp++;
++
++ /* The macaddr */
++ ea.octet[0] = (b[SROM4_MACHI] >> 8) & 0xff;
++ ea.octet[1] = b[SROM4_MACHI] & 0xff;
++ ea.octet[2] = (b[SROM4_MACMID] >> 8) & 0xff;
++ ea.octet[3] = b[SROM4_MACMID] & 0xff;
++ ea.octet[4] = (b[SROM4_MACLO] >> 8) & 0xff;
++ ea.octet[5] = b[SROM4_MACLO] & 0xff;
++ bcm_ether_ntoa(&ea, eabuf);
++ vp += sprintf(vp, "macaddr=%s", eabuf);
++ vp++;
++
++ w = b[SROM4_CCODE];
++ if (w == 0)
++ vp += sprintf(vp, "ccode=");
++ else
++ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff));
++ vp++;
++ vp += sprintf(vp, "regrev=%d", b[SROM4_REGREV]);
++ vp++;
++
++ w = b[SROM4_LEDBH10];
++ if ((w != 0) && (w != 0xffff)) {
++ /* ledbh0 */
++ vp += sprintf(vp, "ledbh0=%d", (w & 0xff));
++ vp++;
++
++ /* ledbh1 */
++ vp += sprintf(vp, "ledbh1=%d", (w >> 8) & 0xff);
++ vp++;
++ }
++ w = b[SROM4_LEDBH32];
++ if ((w != 0) && (w != 0xffff)) {
++ /* ledbh2 */
++ vp += sprintf(vp, "ledbh2=%d", w & 0xff);
++ vp++;
++
++ /* ledbh3 */
++ vp += sprintf(vp, "ledbh3=%d", (w >> 8) & 0xff);
++ vp++;
++ }
++ /* LED Powersave duty cycle (oncount >> 24) (offcount >> 8) */
++ w = b[SROM4_LEDDC];
++ w32 = ((uint32)((unsigned char)(w >> 8) & 0xff) << 24) | /* oncount */
++ ((uint32)((unsigned char)(w & 0xff)) << 8); /* offcount */
++ vp += sprintf(vp, "leddc=%d", w32);
++ vp++;
++
++ w = b[SROM4_AA];
++ vp += sprintf(vp, "aa2g=%d", w & SROM4_AA2G_MASK);
++ vp++;
++ vp += sprintf(vp, "aa5g=%d", w >> SROM4_AA5G_SHIFT);
++ vp++;
++
++ w = b[SROM4_AG10];
++ vp += sprintf(vp, "ag0=%d", w & 0xff);
++ vp++;
++ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff);
++ vp++;
++ w = b[SROM4_AG32];
++ vp += sprintf(vp, "ag2=%d", w & 0xff);
++ vp++;
++ vp += sprintf(vp, "ag3=%d", (w >> 8) & 0xff);
++ vp++;
++
++ /* Fixed power indices when power control is disabled */
++ for (i = 0; i < 2; i++) {
++ w = b[SROM4_TXPID2G + i];
++ vp += sprintf(vp, "txpid2ga%d=%d", 2 * i, w & 0xff);
++ vp++;
++ vp += sprintf(vp, "txpid2ga%d=%d", (2 * i) + 1, (w >> 8) & 0xff);
++ vp++;
++ w = b[SROM4_TXPID5G + i];
++ vp += sprintf(vp, "txpid5ga%d=%d", 2 * i, w & 0xff);
++ vp++;
++ vp += sprintf(vp, "txpid5ga%d=%d", (2 * i) + 1, (w >> 8) & 0xff);
++ vp++;
++ w = b[SROM4_TXPID5GL + i];
++ vp += sprintf(vp, "txpid5gla%d=%d", 2 * i, w & 0xff);
++ vp++;
++ vp += sprintf(vp, "txpid5gla%d=%d", (2 * i) + 1, (w >> 8) & 0xff);
++ vp++;
++ w = b[SROM4_TXPID5GH + i];
++ vp += sprintf(vp, "txpid5gha%d=%d", 2 * i, w & 0xff);
++ vp++;
++ vp += sprintf(vp, "txpid5gha%d=%d", (2 * i) + 1, (w >> 8) & 0xff);
++ vp++;
++ }
++
++ /* Per path variables */
++ for (path = 0; path < MAX_PATH; path++) {
++ pathbase = pathbases[path];
++ w = b[pathbase + SROM4_2G_ITT_MAXP];
++ vp += sprintf(vp, "itt2ga%d=%d", path, w >> B2G_ITT_SHIFT);
++ vp++;
++ vp += sprintf(vp, "maxp2ga%d=%d", path, w & B2G_MAXP_MASK);
++ vp++;
++
++ for (i = 0; i < 4; i++) {
++ vp += sprintf(vp, "pa2gw%da%d=%d", i, path,
++ b[pathbase + SROM4_2G_PA + i]);
++ vp++;
++ }
++
++ w = b[pathbase + SROM4_5G_ITT_MAXP];
++ vp += sprintf(vp, "itt5ga%d=%d", path, w >> B5G_ITT_SHIFT);
++ vp++;
++ vp += sprintf(vp, "maxp5ga%d=%d", path, w & B5G_MAXP_MASK);
++ vp++;
++
++ w = b[pathbase + SROM4_5GLH_MAXP];
++ vp += sprintf(vp, "maxp5lga%d=%d", path, w >> B5GL_MAXP_SHIFT);
++ vp++;
++ vp += sprintf(vp, "maxp5gha%d=%d", path, w & B5GH_MAXP_MASK);
++ vp++;
++
++ for (i = 0; i < 4; i++) {
++ vp += sprintf(vp, "pa5gw%da%d=%d", i, path,
++ b[pathbase + SROM4_5G_PA + i]);
++ vp++;
++ vp += sprintf(vp, "pa5glw%da%d=%d", i, path,
++ b[pathbase + SROM4_5GL_PA + i]);
++ vp++;
++ vp += sprintf(vp, "pa5hgw%da%d=%d", i, path,
++ b[pathbase + SROM4_5GH_PA + i]);
++ vp++;
++ }
++ }
++
++ vp += sprintf(vp, "cck2gpo=%d", b[SROM4_2G_CCKPO]);
++ vp++;
++
++ w32 = ((uint32)b[SROM4_2G_OFDMPO + 1] << 16) | b[SROM4_2G_OFDMPO];
++ vp += sprintf(vp, "ofdm2gpo=%d", w32);
++ vp++;
++
++ w32 = ((uint32)b[SROM4_5G_OFDMPO + 1] << 16) | b[SROM4_5G_OFDMPO];
++ vp += sprintf(vp, "ofdm5gpo=%d", w32);
++ vp++;
++
++ w32 = ((uint32)b[SROM4_5GL_OFDMPO + 1] << 16) | b[SROM4_5GL_OFDMPO];
++ vp += sprintf(vp, "ofdm5glpo=%d", w32);
++ vp++;
++
++ w32 = ((uint32)b[SROM4_5GH_OFDMPO + 1] << 16) | b[SROM4_5GH_OFDMPO];
++ vp += sprintf(vp, "ofdm5ghpo=%d", w32);
++ vp++;
++
++ for (i = 0; i < 8; i++) {
++ vp += sprintf(vp, "mcs2gpo%d=%d", i, b[SROM4_2G_MCSPO]);
++ vp++;
++ vp += sprintf(vp, "mcs5gpo%d=%d", i, b[SROM4_5G_MCSPO]);
++ vp++;
++ vp += sprintf(vp, "mcs5glpo%d=%d", i, b[SROM4_5GL_MCSPO]);
++ vp++;
++ vp += sprintf(vp, "mcs5ghpo%d=%d", i, b[SROM4_5GH_MCSPO]);
++ vp++;
++ }
++
++ vp += sprintf(vp, "ccdpo%d=%d", i, b[SROM4_CCDPO]);
++ vp++;
++ vp += sprintf(vp, "stbcpo%d=%d", i, b[SROM4_STBCPO]);
++ vp++;
++ vp += sprintf(vp, "bw40po%d=%d", i, b[SROM4_BW40PO]);
++ vp++;
++ vp += sprintf(vp, "bwduppo%d=%d", i, b[SROM4_BWDUPPO]);
++ vp++;
++
++ goto done;
++ }
++ if (sromrev >= 3) {
++ /* New section takes over the 3th hardware function space */
++
++ /* Words 22+23 are 11a (mid) ofdm power offsets */
++ w32 = ((uint32)b[23] << 16) | b[22];
++ vp += sprintf(vp, "ofdmapo=%d", w32);
++ vp++;
++
++ /* Words 24+25 are 11a (low) ofdm power offsets */
++ w32 = ((uint32)b[25] << 16) | b[24];
++ vp += sprintf(vp, "ofdmalpo=%d", w32);
++ vp++;
++
++ /* Words 26+27 are 11a (high) ofdm power offsets */
++ w32 = ((uint32)b[27] << 16) | b[26];
++ vp += sprintf(vp, "ofdmahpo=%d", w32);
++ vp++;
++
++ /* LED Powersave duty cycle (oncount >> 24) (offcount >> 8) */
++ w32 = ((uint32)((unsigned char)(b[21] >> 8) & 0xff) << 24) | /* oncount */
++ ((uint32)((unsigned char)(b[21] & 0xff)) << 8); /* offcount */
++ vp += sprintf(vp, "leddc=%d", w32);
++
++ vp++;
++ }
++
++ if (sromrev >= 2) {
++ /* New section takes over the 4th hardware function space */
++
++ /* Word 29 is max power 11a high/low */
++ w = b[29];
++ vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff);
++ vp++;
++ vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff);
++ vp++;
++
++ /* Words 30-32 set the 11alow pa settings,
++ * 33-35 are the 11ahigh ones.
++ */
++ for (i = 0; i < 3; i++) {
++ vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]);
++ vp++;
++ vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]);
++ vp++;
++ }
++ w = b[59];
++ if (w == 0)
++ vp += sprintf(vp, "ccode=");
++ else
++ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff));
++ vp++;
++
++ }
++
++ /* parameter section of sprom starts at byte offset 72 */
++ woff = 72/2;
++
++ /* first 6 bytes are il0macaddr */
++ ea.octet[0] = (b[woff] >> 8) & 0xff;
++ ea.octet[1] = b[woff] & 0xff;
++ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
++ ea.octet[3] = b[woff+1] & 0xff;
++ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
++ ea.octet[5] = b[woff+2] & 0xff;
++ woff += 3;
++ bcm_ether_ntoa(&ea, eabuf);
++ vp += sprintf(vp, "il0macaddr=%s", eabuf);
++ vp++;
++
++ /* next 6 bytes are et0macaddr */
++ ea.octet[0] = (b[woff] >> 8) & 0xff;
++ ea.octet[1] = b[woff] & 0xff;
++ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
++ ea.octet[3] = b[woff+1] & 0xff;
++ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
++ ea.octet[5] = b[woff+2] & 0xff;
++ woff += 3;
++ bcm_ether_ntoa(&ea, eabuf);
++ vp += sprintf(vp, "et0macaddr=%s", eabuf);
++ vp++;
++
++ /* next 6 bytes are et1macaddr */
++ ea.octet[0] = (b[woff] >> 8) & 0xff;
++ ea.octet[1] = b[woff] & 0xff;
++ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
++ ea.octet[3] = b[woff+1] & 0xff;
++ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
++ ea.octet[5] = b[woff+2] & 0xff;
++ woff += 3;
++ bcm_ether_ntoa(&ea, eabuf);
++ vp += sprintf(vp, "et1macaddr=%s", eabuf);
++ vp++;
++
++ /*
++ * Enet phy settings one or two singles or a dual
++ * Bits 4-0 : MII address for enet0 (0x1f for not there)
++ * Bits 9-5 : MII address for enet1 (0x1f for not there)
++ * Bit 14 : Mdio for enet0
++ * Bit 15 : Mdio for enet1
++ */
++ w = b[woff];
++ vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f));
++ vp++;
++ vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f));
++ vp++;
++ vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1));
++ vp++;
++ vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1));
++ vp++;
++
++ /* Word 46 has board rev, antennas 0/1 & Country code/control */
++ w = b[46];
++ vp += sprintf(vp, "boardrev=%d", w & 0xff);
++ vp++;
++
++ if (sromrev > 1)
++ vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf);
++ else
++ vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf);
++ vp++;
++
++ vp += sprintf(vp, "aa2g=%d", (w >> 12) & 0x3);
++ vp++;
++
++ vp += sprintf(vp, "aa5g=%d", (w >> 14) & 0x3);
++ vp++;
++
++ /* Words 47-49 set the (wl) pa settings */
++ woff = 47;
++
++ for (i = 0; i < 3; i++) {
++ vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]);
++ vp++;
++ vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]);
++ vp++;
++ }
++
++ /*
++ * Words 50-51 set the customer-configured wl led behavior.
++ * 8 bits/gpio pin. High bit: activehi=0, activelo=1;
++ * LED behavior values defined in wlioctl.h .
++ */
++ w = b[50];
++ if ((w != 0) && (w != 0xffff)) {
++ /* ledbh0 */
++ vp += sprintf(vp, "ledbh0=%d", (w & 0xff));
++ vp++;
++
++ /* ledbh1 */
++ vp += sprintf(vp, "ledbh1=%d", (w >> 8) & 0xff);
++ vp++;
++ }
++ w = b[51];
++ if ((w != 0) && (w != 0xffff)) {
++ /* ledbh2 */
++ vp += sprintf(vp, "ledbh2=%d", w & 0xff);
++ vp++;
++
++ /* ledbh */
++ vp += sprintf(vp, "ledbh3=%d", (w >> 8) & 0xff);
++ vp++;
++ }
++
++ /* Word 52 is max power 0/1 */
++ w = b[52];
++ vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff);
++ vp++;
++ vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff);
++ vp++;
++
++ /* Word 56 is idle tssi target 0/1 */
++ w = b[56];
++ vp += sprintf(vp, "pa0itssit=%d", w & 0xff);
++ vp++;
++ vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff);
++ vp++;
++
++ /* Word 57 is boardflags, if not programmed make it zero */
++ w32 = (uint32)b[57];
++ if (w32 == 0xffff) w32 = 0;
++ if (sromrev > 1) {
++ /* Word 28 is the high bits of boardflags */
++ w32 |= (uint32)b[28] << 16;
++ }
++ vp += sprintf(vp, "boardflags=%d", w32);
++ vp++;
++
++ /* Word 58 is antenna gain 0/1 */
++ w = b[58];
++ vp += sprintf(vp, "ag0=%d", w & 0xff);
++ vp++;
++
++ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff);
++ vp++;
++
++ if (sromrev == 1) {
++ /* set the oem string */
++ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
++ ((b[59] >> 8) & 0xff), (b[59] & 0xff),
++ ((b[60] >> 8) & 0xff), (b[60] & 0xff),
++ ((b[61] >> 8) & 0xff), (b[61] & 0xff),
++ ((b[62] >> 8) & 0xff), (b[62] & 0xff));
++ vp++;
++ } else if (sromrev == 2) {
++ /* Word 60 OFDM tx power offset from CCK level */
++ /* OFDM Power Offset - opo */
++ vp += sprintf(vp, "opo=%d", b[60] & 0xff);
++ vp++;
++ } else {
++ /* Word 60: cck power offsets */
++ vp += sprintf(vp, "cckpo=%d", b[60]);
++ vp++;
++
++ /* Words 61+62: 11g ofdm power offsets */
++ w32 = ((uint32)b[62] << 16) | b[61];
++ vp += sprintf(vp, "ofdmgpo=%d", w32);
++ vp++;
++ }
++
++ /* final nullbyte terminator */
++done: *vp++ = '\0';
++
++ ASSERT((vp - base) <= VARS_MAX);
++
++varsdone:
++ err = initvars_table(osh, base, vp, vars, count);
++
++err:
++#ifdef WLTEST
++ if (base != mfgsromvars)
++#endif
++ MFREE(osh, base, VARS_MAX);
++ MFREE(osh, b, SROM_MAX);
++ return err;
++}
++
++/*
++ * Read the cis and call parsecis to initialize the vars.
++ * Return 0 on success, nonzero on error.
++ */
++static int
++initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, uint *count)
++{
++ uint8 *cis = NULL;
++ int rc;
++ uint data_sz;
++
++ data_sz = (sb_pcmciarev(sbh) == 1) ? (SPROM_SIZE * 2) : CIS_SIZE;
++
++ if ((cis = MALLOC(osh, data_sz)) == NULL)
++ return (-2);
++
++ if (sb_pcmciarev(sbh) == 1) {
++ if (srom_read(PCMCIA_BUS, (void *)NULL, osh, 0, data_sz, (uint16 *)cis)) {
++ MFREE(osh, cis, data_sz);
++ return (-1);
++ }
++ /* fix up endianess for 16-bit data vs 8-bit parsing */
++ ltoh16_buf((uint16 *)cis, data_sz);
++ } else
++ OSL_PCMCIA_READ_ATTR(osh, 0, cis, data_sz);
++
++ rc = srom_parsecis(osh, &cis, 1, vars, count);
++
++ MFREE(osh, cis, data_sz);
++
++ return (rc);
++}
++
+diff -urN linux.old/arch/mips/bcm947xx/bcmutils.c linux.dev/arch/mips/bcm947xx/bcmutils.c
+--- linux.old/arch/mips/bcm947xx/bcmutils.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/bcmutils.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,247 @@
++/*
++ * Misc useful OS-independent routines.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id: bcmutils.c,v 1.1.1.12 2006/02/27 03:43:16 honor Exp $
++ */
++
++#include <typedefs.h>
++#include <bcmdefs.h>
++#include <stdarg.h>
++#include <bcmutils.h>
++#include <osl.h>
++#include <sbutils.h>
++#include <bcmnvram.h>
++#include <bcmendian.h>
++#include <bcmdevs.h>
++
++unsigned char bcm_ctype[] = {
++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */
++ _BCM_C, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C,
++ _BCM_C, /* 8-15 */
++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */
++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */
++ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */
++ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */
++ _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */
++ _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */
++ _BCM_P, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X,
++ _BCM_U|_BCM_X, _BCM_U, /* 64-71 */
++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */
++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */
++ _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */
++ _BCM_P, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X,
++ _BCM_L|_BCM_X, _BCM_L, /* 96-103 */
++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */
++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */
++ _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */
++ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 128-143 */
++ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 144-159 */
++ _BCM_S|_BCM_SP, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P,
++ _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, /* 160-175 */
++ _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P,
++ _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, /* 176-191 */
++ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U,
++ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, /* 192-207 */
++ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_P, _BCM_U, _BCM_U, _BCM_U,
++ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_L, /* 208-223 */
++ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L,
++ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, /* 224-239 */
++ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_P, _BCM_L, _BCM_L, _BCM_L,
++ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L /* 240-255 */
++};
++
++
++ulong
++bcm_strtoul(char *cp, char **endp, uint base)
++{
++ ulong result, value;
++ bool minus;
++
++ minus = FALSE;
++
++ while (bcm_isspace(*cp))
++ cp++;
++
++ if (cp[0] == '+')
++ cp++;
++ else if (cp[0] == '-') {
++ minus = TRUE;
++ cp++;
++ }
++
++ if (base == 0) {
++ if (cp[0] == '0') {
++ if ((cp[1] == 'x') || (cp[1] == 'X')) {
++ base = 16;
++ cp = &cp[2];
++ } else {
++ base = 8;
++ cp = &cp[1];
++ }
++ } else
++ base = 10;
++ } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) {
++ cp = &cp[2];
++ }
++
++ result = 0;
++
++ while (bcm_isxdigit(*cp) &&
++ (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) {
++ result = result*base + value;
++ cp++;
++ }
++
++ if (minus)
++ result = (ulong)(result * -1);
++
++ if (endp)
++ *endp = (char *)cp;
++
++ return (result);
++}
++
++uchar
++bcm_toupper(uchar c)
++{
++ if (bcm_islower(c))
++ c -= 'a'-'A';
++ return (c);
++}
++
++char*
++bcm_ether_ntoa(struct ether_addr *ea, char *buf)
++{
++ sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x",
++ ea->octet[0]&0xff, ea->octet[1]&0xff, ea->octet[2]&0xff,
++ ea->octet[3]&0xff, ea->octet[4]&0xff, ea->octet[5]&0xff);
++ return (buf);
++}
++
++
++/*
++ * Search the name=value vars for a specific one and return its value.
++ * Returns NULL if not found.
++ */
++char*
++getvar(char *vars, char *name)
++{
++ char *s;
++ int len;
++
++ len = strlen(name);
++
++ /* first look in vars[] */
++ for (s = vars; s && *s;) {
++ /* CSTYLED */
++ if ((memcmp(s, name, len) == 0) && (s[len] == '='))
++ return (&s[len+1]);
++
++ while (*s++)
++ ;
++ }
++
++ /* then query nvram */
++ return (nvram_get(name));
++}
++
++/*
++ * Search the vars for a specific one and return its value as
++ * an integer. Returns 0 if not found.
++ */
++int
++getintvar(char *vars, char *name)
++{
++ char *val;
++
++ if ((val = getvar(vars, name)) == NULL)
++ return (0);
++
++ return (bcm_strtoul(val, NULL, 0));
++}
++
++
++/*******************************************************************************
++ * crc8
++ *
++ * Computes a crc8 over the input data using the polynomial:
++ *
++ * x^8 + x^7 +x^6 + x^4 + x^2 + 1
++ *
++ * The caller provides the initial value (either CRC8_INIT_VALUE
++ * or the previous returned value) to allow for processing of
++ * discontiguous blocks of data. When generating the CRC the
++ * caller is responsible for complementing the final return value
++ * and inserting it into the byte stream. When checking, a final
++ * return value of CRC8_GOOD_VALUE indicates a valid CRC.
++ *
++ * Reference: Dallas Semiconductor Application Note 27
++ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
++ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
++ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
++ *
++ * ****************************************************************************
++ */
++
++static uint8 crc8_table[256] = {
++ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
++ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
++ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
++ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
++ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
++ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
++ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
++ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
++ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
++ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
++ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
++ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
++ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
++ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
++ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
++ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
++ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
++ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
++ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
++ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
++ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
++ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
++ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
++ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
++ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
++ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
++ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
++ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
++ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
++ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
++ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
++ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
++};
++
++#define CRC_INNER_LOOP(n, c, x) \
++ (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
++
++uint8
++hndcrc8(
++ uint8 *pdata, /* pointer to array of data to process */
++ uint nbytes, /* number of input data bytes to process */
++ uint8 crc /* either CRC8_INIT_VALUE or previous return value */
++)
++{
++ /* hard code the crc loop instead of using CRC_INNER_LOOP macro
++ * to avoid the undefined and unnecessary (uint8 >> 8) operation.
++ */
++ while (nbytes-- > 0)
++ crc = crc8_table[(crc ^ *pdata++) & 0xff];
++
++ return crc;
++}
++
++
+diff -urN linux.old/arch/mips/bcm947xx/cfe_env.c linux.dev/arch/mips/bcm947xx/cfe_env.c
+--- linux.old/arch/mips/bcm947xx/cfe_env.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/cfe_env.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,234 @@
++/*
++ * NVRAM variable manipulation (Linux kernel half)
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmendian.h>
++#include <bcmutils.h>
++
++#define NVRAM_SIZE (0x1ff0)
++static char _nvdata[NVRAM_SIZE] __initdata;
++static char _valuestr[256] __initdata;
++
++/*
++ * TLV types. These codes are used in the "type-length-value"
++ * encoding of the items stored in the NVRAM device (flash or EEPROM)
++ *
++ * The layout of the flash/nvram is as follows:
++ *
++ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
++ *
++ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
++ * The "length" field marks the length of the data section, not
++ * including the type and length fields.
++ *
++ * Environment variables are stored as follows:
++ *
++ * <type_env> <length> <flags> <name> = <value>
++ *
++ * If bit 0 (low bit) is set, the length is an 8-bit value.
++ * If bit 0 (low bit) is clear, the length is a 16-bit value
++ *
++ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
++ * indicates the size of the length field.
++ *
++ * Flags are from the constants below:
++ *
++ */
++#define ENV_LENGTH_16BITS 0x00 /* for low bit */
++#define ENV_LENGTH_8BITS 0x01
++
++#define ENV_TYPE_USER 0x80
++
++#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
++#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
++
++/*
++ * The actual TLV types we support
++ */
++
++#define ENV_TLV_TYPE_END 0x00
++#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
++
++/*
++ * Environment variable flags
++ */
++
++#define ENV_FLG_NORMAL 0x00 /* normal read/write */
++#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
++#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
++
++#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
++#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
++
++
++/* *********************************************************************
++ * _nvram_read(buffer,offset,length)
++ *
++ * Read data from the NVRAM device
++ *
++ * Input parameters:
++ * buffer - destination buffer
++ * offset - offset of data to read
++ * length - number of bytes to read
++ *
++ * Return value:
++ * number of bytes read, or <0 if error occured
++ ********************************************************************* */
++static int
++_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
++{
++ int i;
++ if (offset > NVRAM_SIZE)
++ return -1;
++
++ for ( i = 0; i < length; i++) {
++ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
++ }
++ return length;
++}
++
++
++static char*
++_strnchr(const char *dest,int c,size_t cnt)
++{
++ while (*dest && (cnt > 0)) {
++ if (*dest == c) return (char *) dest;
++ dest++;
++ cnt--;
++ }
++ return NULL;
++}
++
++
++
++/*
++ * Core support API: Externally visible.
++ */
++
++/*
++ * Get the value of an NVRAM variable
++ * @param name name of variable to get
++ * @return value of variable or NULL if undefined
++ */
++
++char*
++cfe_env_get(unsigned char *nv_buf, char* name)
++{
++ int size;
++ unsigned char *buffer;
++ unsigned char *ptr;
++ unsigned char *envval;
++ unsigned int reclen;
++ unsigned int rectype;
++ int offset;
++ int flg;
++
++ size = NVRAM_SIZE;
++ buffer = &_nvdata[0];
++
++ ptr = buffer;
++ offset = 0;
++
++ /* Read the record type and length */
++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
++ goto error;
++ }
++
++ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
++
++ /* Adjust pointer for TLV type */
++ rectype = *(ptr);
++ offset++;
++ size--;
++
++ /*
++ * Read the length. It can be either 1 or 2 bytes
++ * depending on the code
++ */
++ if (rectype & ENV_LENGTH_8BITS) {
++ /* Read the record type and length - 8 bits */
++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
++ goto error;
++ }
++ reclen = *(ptr);
++ size--;
++ offset++;
++ }
++ else {
++ /* Read the record type and length - 16 bits, MSB first */
++ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
++ goto error;
++ }
++ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
++ size -= 2;
++ offset += 2;
++ }
++
++ if (reclen > size)
++ break; /* should not happen, bad NVRAM */
++
++ switch (rectype) {
++ case ENV_TLV_TYPE_ENV:
++ /* Read the TLV data */
++ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
++ goto error;
++ flg = *ptr++;
++ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
++ if (envval) {
++ *envval++ = '\0';
++ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
++ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
++#if 0
++ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
++#endif
++ if(!strcmp(ptr, name)){
++ return _valuestr;
++ }
++ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
++ return _valuestr;
++ }
++ break;
++
++ default:
++ /* Unknown TLV type, skip it. */
++ break;
++ }
++
++ /*
++ * Advance to next TLV
++ */
++
++ size -= (int)reclen;
++ offset += reclen;
++
++ /* Read the next record type */
++ ptr = buffer;
++ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
++ goto error;
++ }
++
++error:
++ return NULL;
++
++}
++
+diff -urN linux.old/arch/mips/bcm947xx/compressed/Makefile linux.dev/arch/mips/bcm947xx/compressed/Makefile
+--- linux.old/arch/mips/bcm947xx/compressed/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/compressed/Makefile 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,33 @@
++#
++# Makefile for Broadcom BCM947XX boards
++#
++# Copyright 2001-2003, Broadcom Corporation
++# All Rights Reserved.
++#
++# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++#
++# $Id: Makefile,v 1.2 2005/04/02 12:12:57 wbx Exp $
++#
++
++OBJCOPY_ARGS = -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
++SYSTEM ?= $(TOPDIR)/vmlinux
++
++all: vmlinuz
++
++# Don't build dependencies, this may die if $(CC) isn't gcc
++dep:
++
++# Create a gzipped version named vmlinuz for compatibility
++vmlinuz: piggy
++ gzip -c9 $< > $@
++
++piggy: $(SYSTEM)
++ $(OBJCOPY) $(OBJCOPY_ARGS) $< $@
++
++mrproper: clean
++
++clean:
++ rm -f vmlinuz piggy
+diff -urN linux.old/arch/mips/bcm947xx/export.c linux.dev/arch/mips/bcm947xx/export.c
+--- linux.old/arch/mips/bcm947xx/export.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/export.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,65 @@
++#include <linux/module.h>
++
++#define _export(n) \
++ void n(void); \
++ EXPORT_SYMBOL(n);
++
++_export(bcm947xx_sbh)
++
++_export(sb_attach)
++_export(sb_kattach)
++_export(sb_boardtype)
++_export(sb_boardvendor)
++_export(sb_btcgpiowar)
++_export(sb_bus)
++_export(sb_chip)
++_export(sb_chiprev)
++_export(sb_chipcrev)
++_export(sb_chippkg)
++_export(sb_clkctl_clk)
++_export(sb_clkctl_fast_pwrup_delay)
++_export(sb_clkctl_init)
++_export(sb_clkctl_xtal)
++_export(sb_core_disable)
++_export(sb_core_reset)
++_export(sb_core_tofixup)
++_export(sb_coreflags)
++_export(sb_coreflagshi)
++_export(sb_coreidx)
++_export(sb_corerev)
++_export(sb_coreunit)
++_export(sb_detach)
++_export(sb_deviceremoved)
++_export(sb_gpiosetcore)
++_export(sb_gpiocontrol)
++_export(sb_gpioled)
++_export(sb_gpioin)
++_export(sb_gpioout)
++_export(sb_gpioouten)
++_export(sb_gpiotimerval)
++_export(sb_iscoreup)
++_export(sb_pci_setup)
++_export(sb_pcirev)
++_export(sb_pcmcia_init)
++_export(sb_pcmciarev)
++_export(sb_register_intr_callback)
++_export(sb_setcore)
++_export(sb_war16165)
++_export(sb_osh)
++
++_export(getvar)
++_export(getintvar)
++_export(bcm_strtoul)
++_export(bcm_ctype)
++_export(bcm_toupper)
++_export(bcm_ether_ntoa)
++
++_export(nvram_get)
++_export(nvram_getall)
++_export(nvram_set)
++_export(nvram_unset)
++_export(nvram_commit)
++
++_export(srom_read)
++_export(srom_write)
++
+diff -urN linux.old/arch/mips/bcm947xx/generic/int-handler.S linux.dev/arch/mips/bcm947xx/generic/int-handler.S
+--- linux.old/arch/mips/bcm947xx/generic/int-handler.S 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/generic/int-handler.S 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,51 @@
++/*
++ * Generic interrupt handler for Broadcom MIPS boards
++ *
++ * Copyright 2004, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: int-handler.S,v 1.1 2005/03/16 13:50:00 wbx Exp $
++ */
++
++#include <linux/config.h>
++
++#include <asm/asm.h>
++#include <asm/mipsregs.h>
++#include <asm/regdef.h>
++#include <asm/stackframe.h>
++
++/*
++ * MIPS IRQ Source
++ * -------- ------
++ * 0 Software (ignored)
++ * 1 Software (ignored)
++ * 2 Combined hardware interrupt (hw0)
++ * 3 Hardware
++ * 4 Hardware
++ * 5 Hardware
++ * 6 Hardware
++ * 7 R4k timer
++ */
++
++ .text
++ .set noreorder
++ .set noat
++ .align 5
++ NESTED(brcmIRQ, PT_SIZE, sp)
++ SAVE_ALL
++ CLI
++ .set at
++ .set noreorder
++
++ jal brcm_irq_dispatch
++ move a0, sp
++
++ j ret_from_irq
++ nop
++
++ END(brcmIRQ)
+diff -urN linux.old/arch/mips/bcm947xx/generic/irq.c linux.dev/arch/mips/bcm947xx/generic/irq.c
+--- linux.old/arch/mips/bcm947xx/generic/irq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/generic/irq.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,130 @@
++/*
++ * Generic interrupt control functions for Broadcom MIPS boards
++ *
++ * Copyright 2004, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: irq.c,v 1.1 2005/03/16 13:50:00 wbx Exp $
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++
++#include <asm/irq.h>
++#include <asm/mipsregs.h>
++#include <asm/gdb-stub.h>
++
++#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
++
++extern asmlinkage void brcmIRQ(void);
++extern asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs);
++
++void
++brcm_irq_dispatch(struct pt_regs *regs)
++{
++ u32 cause;
++
++ cause = read_c0_cause() &
++ read_c0_status() &
++ CAUSEF_IP;
++
++#ifdef CONFIG_KERNPROF
++ change_c0_status(cause | 1, 1);
++#else
++ clear_c0_status(cause);
++#endif
++
++ if (cause & CAUSEF_IP7)
++ do_IRQ(7, regs);
++ if (cause & CAUSEF_IP2)
++ do_IRQ(2, regs);
++ if (cause & CAUSEF_IP3)
++ do_IRQ(3, regs);
++ if (cause & CAUSEF_IP4)
++ do_IRQ(4, regs);
++ if (cause & CAUSEF_IP5)
++ do_IRQ(5, regs);
++ if (cause & CAUSEF_IP6)
++ do_IRQ(6, regs);
++}
++
++static void
++enable_brcm_irq(unsigned int irq)
++{
++ if (irq < 8)
++ set_c0_status(1 << (irq + 8));
++ else
++ set_c0_status(IE_IRQ0);
++}
++
++static void
++disable_brcm_irq(unsigned int irq)
++{
++ if (irq < 8)
++ clear_c0_status(1 << (irq + 8));
++ else
++ clear_c0_status(IE_IRQ0);
++}
++
++static void
++ack_brcm_irq(unsigned int irq)
++{
++ /* Already done in brcm_irq_dispatch */
++}
++
++static unsigned int
++startup_brcm_irq(unsigned int irq)
++{
++ enable_brcm_irq(irq);
++
++ return 0; /* never anything pending */
++}
++
++static void
++end_brcm_irq(unsigned int irq)
++{
++ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
++ enable_brcm_irq(irq);
++}
++
++static struct hw_interrupt_type brcm_irq_type = {
++ typename: "MIPS",
++ startup: startup_brcm_irq,
++ shutdown: disable_brcm_irq,
++ enable: enable_brcm_irq,
++ disable: disable_brcm_irq,
++ ack: ack_brcm_irq,
++ end: end_brcm_irq,
++ NULL
++};
++
++void __init
++init_IRQ(void)
++{
++ int i;
++
++ for (i = 0; i < NR_IRQS; i++) {
++ irq_desc[i].status = IRQ_DISABLED;
++ irq_desc[i].action = 0;
++ irq_desc[i].depth = 1;
++ irq_desc[i].handler = &brcm_irq_type;
++ }
++
++ set_except_vector(0, brcmIRQ);
++ change_c0_status(ST0_IM, ALLINTS);
++
++#ifdef CONFIG_REMOTE_DEBUG
++ printk("Breaking into debugger...\n");
++ set_debug_traps();
++ breakpoint();
++#endif
++}
+diff -urN linux.old/arch/mips/bcm947xx/generic/Makefile linux.dev/arch/mips/bcm947xx/generic/Makefile
+--- linux.old/arch/mips/bcm947xx/generic/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/generic/Makefile 2006-10-02 21:26:29.000000000 +0200
+@@ -0,0 +1,16 @@
++#
++# Makefile for the BCM947xx specific kernel interface routines
++# under Linux.
++#
++EXTRA_CFLAGS += -fno-delayed-branch
++
++.S.s:
++ $(CPP) $(AFLAGS) $< -o $*.s
++.S.o:
++ $(CC) $(AFLAGS) -c $< -o $*.o
++
++O_TARGET := brcm.o
++
++obj-y := int-handler.o irq.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/arch/mips/bcm947xx/gpio.c linux.dev/arch/mips/bcm947xx/gpio.c
+--- linux.old/arch/mips/bcm947xx/gpio.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/gpio.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,159 @@
++/*
++ * GPIO char driver
++ *
++ * Copyright 2005, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/fs.h>
++#include <linux/miscdevice.h>
++#include <asm/uaccess.h>
++
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <sbutils.h>
++#include <bcmdevs.h>
++
++static sb_t *gpio_sbh;
++static int gpio_major;
++static devfs_handle_t gpio_dir;
++static struct {
++ char *name;
++ devfs_handle_t handle;
++} gpio_file[] = {
++ { "in", NULL },
++ { "out", NULL },
++ { "outen", NULL },
++ { "control", NULL }
++};
++
++static int
++gpio_open(struct inode *inode, struct file * file)
++{
++ if (MINOR(inode->i_rdev) > ARRAYSIZE(gpio_file))
++ return -ENODEV;
++
++ MOD_INC_USE_COUNT;
++ return 0;
++}
++
++static int
++gpio_release(struct inode *inode, struct file * file)
++{
++ MOD_DEC_USE_COUNT;
++ return 0;
++}
++
++static ssize_t
++gpio_read(struct file *file, char *buf, size_t count, loff_t *ppos)
++{
++ u32 val;
++
++ switch (MINOR(file->f_dentry->d_inode->i_rdev)) {
++ case 0:
++ val = sb_gpioin(gpio_sbh);
++ break;
++ case 1:
++ val = sb_gpioout(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
++ break;
++ case 2:
++ val = sb_gpioouten(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
++ break;
++ case 3:
++ val = sb_gpiocontrol(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
++ break;
++ default:
++ return -ENODEV;
++ }
++
++ if (put_user(val, (u32 *) buf))
++ return -EFAULT;
++
++ return sizeof(val);
++}
++
++static ssize_t
++gpio_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
++{
++ u32 val;
++
++ if (get_user(val, (u32 *) buf))
++ return -EFAULT;
++
++ switch (MINOR(file->f_dentry->d_inode->i_rdev)) {
++ case 0:
++ return -EACCES;
++ case 1:
++ sb_gpioout(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
++ break;
++ case 2:
++ sb_gpioouten(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
++ break;
++ case 3:
++ sb_gpiocontrol(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
++ break;
++ default:
++ return -ENODEV;
++ }
++
++ return sizeof(val);
++}
++
++static struct file_operations gpio_fops = {
++ owner: THIS_MODULE,
++ open: gpio_open,
++ release: gpio_release,
++ read: gpio_read,
++ write: gpio_write,
++};
++
++static int __init
++gpio_init(void)
++{
++ int i;
++
++ if (!(gpio_sbh = sb_kattach()))
++ return -ENODEV;
++
++ sb_gpiosetcore(gpio_sbh);
++
++ if ((gpio_major = devfs_register_chrdev(0, "gpio", &gpio_fops)) < 0)
++ return gpio_major;
++
++ gpio_dir = devfs_mk_dir(NULL, "gpio", NULL);
++
++ for (i = 0; i < ARRAYSIZE(gpio_file); i++) {
++ gpio_file[i].handle = devfs_register(gpio_dir,
++ gpio_file[i].name,
++ DEVFS_FL_DEFAULT, gpio_major, i,
++ S_IFCHR | S_IRUGO | S_IWUGO,
++ &gpio_fops, NULL);
++ }
++
++ return 0;
++}
++
++static void __exit
++gpio_exit(void)
++{
++ int i;
++
++ for (i = 0; i < ARRAYSIZE(gpio_file); i++)
++ devfs_unregister(gpio_file[i].handle);
++ devfs_unregister(gpio_dir);
++ devfs_unregister_chrdev(gpio_major, "gpio");
++ sb_detach(gpio_sbh);
++}
++
++module_init(gpio_init);
++module_exit(gpio_exit);
+diff -urN linux.old/arch/mips/bcm947xx/hndchipc.c linux.dev/arch/mips/bcm947xx/hndchipc.c
+--- linux.old/arch/mips/bcm947xx/hndchipc.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/hndchipc.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,158 @@
++/*
++ * BCM47XX support code for some chipcommon (old extif) facilities (uart)
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: hndchipc.c,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $
++ */
++
++#include <typedefs.h>
++#include <bcmdefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <sbutils.h>
++#include <bcmdevs.h>
++#include <bcmnvram.h>
++#include <sbconfig.h>
++#include <sbextif.h>
++#include <sbchipc.h>
++#include <hndcpu.h>
++
++/*
++ * Returns TRUE if an external UART exists at the given base
++ * register.
++ */
++static bool
++BCMINITFN(serial_exists)(osl_t *osh, uint8 *regs)
++{
++ uint8 save_mcr, status1;
++
++ save_mcr = R_REG(osh, &regs[UART_MCR]);
++ W_REG(osh, &regs[UART_MCR], UART_MCR_LOOP | 0x0a);
++ status1 = R_REG(osh, &regs[UART_MSR]) & 0xf0;
++ W_REG(osh, &regs[UART_MCR], save_mcr);
++
++ return (status1 == 0x90);
++}
++
++/*
++ * Initializes UART access. The callback function will be called once
++ * per found UART.
++ */
++void
++BCMINITFN(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base,
++ uint reg_shift))
++{
++ osl_t *osh;
++ void *regs;
++ ulong base;
++ uint irq;
++ int i, n;
++
++ osh = sb_osh(sbh);
++
++ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) {
++ extifregs_t *eir = (extifregs_t *) regs;
++ sbconfig_t *sb;
++
++ /* Determine external UART register base */
++ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
++ base = EXTIF_CFGIF_BASE(sb_base(R_REG(osh, &sb->sbadmatch1)));
++
++ /* Determine IRQ */
++ irq = sb_irq(sbh);
++
++ /* Disable GPIO interrupt initially */
++ W_REG(osh, &eir->gpiointpolarity, 0);
++ W_REG(osh, &eir->gpiointmask, 0);
++
++ /* Search for external UARTs */
++ n = 2;
++ for (i = 0; i < 2; i++) {
++ regs = (void *) REG_MAP(base + (i * 8), 8);
++ if (serial_exists(osh, regs)) {
++ /* Set GPIO 1 to be the external UART IRQ */
++ W_REG(osh, &eir->gpiointmask, 2);
++ /* XXXDetermine external UART clock */
++ if (add)
++ add(regs, irq, 13500000, 0);
++ }
++ }
++
++ /* Add internal UART if enabled */
++ if (R_REG(osh, &eir->corecontrol) & CC_UE)
++ if (add)
++ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
++ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) {
++ chipcregs_t *cc = (chipcregs_t *) regs;
++ uint32 rev, cap, pll, baud_base, div;
++
++ /* Determine core revision and capabilities */
++ rev = sb_corerev(sbh);
++ cap = R_REG(osh, &cc->capabilities);
++ pll = cap & CAP_PLL_MASK;
++
++ /* Determine IRQ */
++ irq = sb_irq(sbh);
++
++ if (pll == PLL_TYPE1) {
++ /* PLL clock */
++ baud_base = sb_clock_rate(pll,
++ R_REG(osh, &cc->clockcontrol_n),
++ R_REG(osh, &cc->clockcontrol_m2));
++ div = 1;
++ } else {
++ /* Fixed ALP clock */
++ if (rev >= 11 && rev != 15) {
++ baud_base = 20000000;
++ div = 1;
++ /* Set the override bit so we don't divide it */
++ W_REG(osh, &cc->corecontrol, CC_UARTCLKO);
++ }
++ /* Internal backplane clock */
++ else if (rev >= 3) {
++ baud_base = sb_clock(sbh);
++ div = 2; /* Minimum divisor */
++ W_REG(osh, &cc->clkdiv,
++ ((R_REG(osh, &cc->clkdiv) & ~CLKD_UART) | div));
++ }
++ /* Fixed internal backplane clock */
++ else {
++ baud_base = 88000000;
++ div = 48;
++ }
++
++ /* Clock source depends on strapping if UartClkOverride is unset */
++ if ((rev > 0) &&
++ ((R_REG(osh, &cc->corecontrol) & CC_UARTCLKO) == 0)) {
++ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) {
++ /* Internal divided backplane clock */
++ baud_base /= div;
++ } else {
++ /* Assume external clock of 1.8432 MHz */
++ baud_base = 1843200;
++ }
++ }
++ }
++
++ /* Add internal UARTs */
++ n = cap & CAP_UARTS_MASK;
++ for (i = 0; i < n; i++) {
++ /* Register offset changed after revision 0 */
++ if (rev)
++ regs = (void *)((ulong) &cc->uart0data + (i * 256));
++ else
++ regs = (void *)((ulong) &cc->uart0data + (i * 8));
++
++ if (add)
++ add(regs, irq, baud_base, 0);
++ }
++ }
++}
++
+diff -urN linux.old/arch/mips/bcm947xx/include/bcm4710.h linux.dev/arch/mips/bcm947xx/include/bcm4710.h
+--- linux.old/arch/mips/bcm947xx/include/bcm4710.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcm4710.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,91 @@
++/*
++ * BCM4710 address space map and definitions
++ * Think twice before adding to this file, this is not the kitchen sink
++ * These definitions are not guaranteed for all 47xx chips, only the 4710
++ *
++ * Copyright 2004, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: bcm4710.h,v 1.3 2004/09/27 07:23:30 tallest Exp $
++ */
++
++#ifndef _bcm4710_h_
++#define _bcm4710_h_
++
++/* Address map */
++#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */
++#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */
++#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */
++#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */
++#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */
++#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */
++
++/* Core register space */
++#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */
++#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */
++#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */
++#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */
++#define BCM4710_REG_USB 0x18004000 /* USB core registers */
++#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */
++#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */
++#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */
++#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */
++
++#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */
++#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */
++#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */
++#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */
++#define BCM4710_PROG 0x1f800000 /* Programable interface */
++#define BCM4710_FLASH 0x1fc00000 /* Flash */
++
++#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */
++
++#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300)
++
++#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000)
++#define BCM4710_LED (BCM4710_EXTIF + 0x00900000)
++
++#define SBFLAG_PCI 0
++#define SBFLAG_ENET0 1
++#define SBFLAG_ILINE20 2
++#define SBFLAG_CODEC 3
++#define SBFLAG_USB 4
++#define SBFLAG_EXTIF 5
++#define SBFLAG_ENET1 6
++
++#ifdef CONFIG_HWSIM
++#define BCM4710_TRACE(trval) do { *((int *)0xa0000f18) = (trval); } while (0)
++#else
++#define BCM4710_TRACE(trval)
++#endif
++
++
++/* BCM94702 CPCI -ExtIF used for LocalBus devs */
++
++#define BCM94702_CPCI_RESET_ADDR BCM4710_EXTIF
++#define BCM94702_CPCI_BOARDID_ADDR (BCM4710_EXTIF | 0x4000)
++#define BCM94702_CPCI_DOC_ADDR (BCM4710_EXTIF | 0x6000)
++#define BCM94702_DOC_ADDR BCM94702_CPCI_DOC_ADDR
++#define BCM94702_CPCI_LED_ADDR (BCM4710_EXTIF | 0xc000)
++#define BCM94702_CPCI_NVRAM_ADDR (BCM4710_EXTIF | 0xe000)
++#define BCM94702_CPCI_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/
++#define BCM94702_CPCI_TOD_REG_BASE (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0)
++
++#define LED_REG(x) \
++ (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x)))
++
++/*
++ * Reset function implemented in PLD. Read or write should trigger hard reset
++ */
++#define SYS_HARD_RESET() \
++ { for (;;) \
++ *( (volatile unsigned char *)\
++ KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \
++ }
++
++#endif /* _bcm4710_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmdefs.h linux.dev/arch/mips/bcm947xx/include/bcmdefs.h
+--- linux.old/arch/mips/bcm947xx/include/bcmdefs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmdefs.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,106 @@
++/*
++ * Misc system wide definitions
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id: bcmdefs.h,v 1.1.1.3 2006/04/08 06:13:39 honor Exp $
++ */
++
++#ifndef _bcmdefs_h_
++#define _bcmdefs_h_
++
++/*
++ * One doesn't need to include this file explicitly, gets included automatically if
++ * typedefs.h is included.
++ */
++
++/* Reclaiming text and data :
++ * The following macros specify special linker sections that can be reclaimed
++ * after a system is considered 'up'.
++ */
++#if defined(__GNUC__) && defined(BCMRECLAIM)
++extern bool bcmreclaimed;
++#define BCMINITDATA(_data) __attribute__ ((__section__ (".dataini." #_data))) _data
++#define BCMINITFN(_fn) __attribute__ ((__section__ (".textini." #_fn))) _fn
++#else /* #if defined(__GNUC__) && defined(BCMRECLAIM) */
++#define BCMINITDATA(_data) _data
++#define BCMINITFN(_fn) _fn
++#define bcmreclaimed 0
++#endif /* #if defined(__GNUC__) && defined(BCMRECLAIM) */
++
++/* Reclaim uninit functions if BCMNODOWN is defined */
++/* and if they are not already removed by -gc-sections */
++#ifdef BCMNODOWN
++#define BCMUNINITFN(_fn) BCMINITFN(_fn)
++#else
++#define BCMUNINITFN(_fn) _fn
++#endif
++
++#ifdef BCMRECLAIM
++#define CONST
++#else
++#define CONST const
++#endif /* BCMRECLAIM */
++
++/* Compatibility with old-style BCMRECLAIM */
++#define BCMINIT(_id) _id
++
++
++/* Put some library data/code into ROM to reduce RAM requirements */
++#if defined(__GNUC__) && defined(BCMROMOFFLOAD)
++#define BCMROMDATA(_data) __attribute__ ((__section__ (".datarom." #_data))) _data
++#define BCMROMFN(_fn) __attribute__ ((__section__ (".textrom." #_fn))) _fn
++#else
++#define BCMROMDATA(_data) _data
++#define BCMROMFN(_fn) _fn
++#endif
++
++/* Bus types */
++#define SB_BUS 0 /* Silicon Backplane */
++#define PCI_BUS 1 /* PCI target */
++#define PCMCIA_BUS 2 /* PCMCIA target */
++#define SDIO_BUS 3 /* SDIO target */
++#define JTAG_BUS 4 /* JTAG */
++#define NO_BUS 0xFF /* Bus that does not support R/W REG */
++
++/* Allows optimization for single-bus support */
++#ifdef BCMBUSTYPE
++#define BUSTYPE(bus) (BCMBUSTYPE)
++#else
++#define BUSTYPE(bus) (bus)
++#endif
++
++/* Defines for DMA Address Width - Shared between OSL and HNDDMA */
++#define DMADDR_MASK_32 0x0 /* Address mask for 32-bits */
++#define DMADDR_MASK_30 0xc0000000 /* Address mask for 30-bits */
++#define DMADDR_MASK_0 0xffffffff /* Address mask for 0-bits (hi-part) */
++
++#define DMADDRWIDTH_30 30 /* 30-bit addressing capability */
++#define DMADDRWIDTH_32 32 /* 32-bit addressing capability */
++#define DMADDRWIDTH_63 63 /* 64-bit addressing capability */
++#define DMADDRWIDTH_64 64 /* 64-bit addressing capability */
++
++/* packet headroom necessary to accomodate the largest header in the system, (i.e TXOFF).
++ * By doing, we avoid the need to allocate an extra buffer for the header when bridging to WL.
++ * There is a compile time check in wlc.c which ensure that this value is at least as big
++ * as TXOFF. This value is used in dma_rxfill (hnddma.c).
++ */
++#define BCMEXTRAHDROOM 160
++
++/* Headroom required for dongle-to-host communication. Packets allocated
++ * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should
++ * leave this much room in front for low-level message headers which may
++ * be needed to get across the dongle bus to the host. (These messages
++ * don't go over the network, so room for the full WL header above would
++ * be a waste.)
++ */
++#define BCMDONGLEHDRSZ 8
++
++
++
++#endif /* _bcmdefs_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs1.h linux.dev/arch/mips/bcm947xx/include/bcmdevs1.h
+--- linux.old/arch/mips/bcm947xx/include/bcmdevs1.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmdevs1.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,391 @@
++/*
++ * Broadcom device-specific manifest constants.
++ *
++ * Copyright 2005, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id$
++ */
++
++#ifndef _BCMDEVS_H
++#define _BCMDEVS_H
++
++
++/* Known PCI vendor Id's */
++#define VENDOR_EPIGRAM 0xfeda
++#define VENDOR_BROADCOM 0x14e4
++#define VENDOR_3COM 0x10b7
++#define VENDOR_NETGEAR 0x1385
++#define VENDOR_DIAMOND 0x1092
++#define VENDOR_DELL 0x1028
++#define VENDOR_HP 0x0e11
++#define VENDOR_APPLE 0x106b
++
++/* PCI Device Id's */
++#define BCM4210_DEVICE_ID 0x1072 /* never used */
++#define BCM4211_DEVICE_ID 0x4211
++#define BCM4230_DEVICE_ID 0x1086 /* never used */
++#define BCM4231_DEVICE_ID 0x4231
++
++#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */
++#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */
++#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */
++#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */
++
++#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */
++#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */
++
++#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */
++#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */
++
++#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */
++#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */
++#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */
++#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */
++#define BCM47XX_USB_ID 0x4715 /* 47xx usb */
++#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */
++#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */
++#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */
++#define BCM47XX_ROBO_ID 0x4719 /* 47xx/53xx roboswitch core */
++#define BCM47XX_USB20H_ID 0x471a /* 47xx usb 2.0 host */
++#define BCM47XX_USB20D_ID 0x471b /* 47xx usb 2.0 device */
++
++#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */
++
++#define BCM4610_DEVICE_ID 0x4610 /* 4610 primary function 0 */
++#define BCM4610_ILINE_ID 0x4611 /* 4610 iline100 */
++#define BCM4610_V90_ID 0x4612 /* 4610 v90 codec */
++#define BCM4610_ENET_ID 0x4613 /* 4610 enet */
++#define BCM4610_EXT_ID 0x4614 /* 4610 external i/f */
++#define BCM4610_USB_ID 0x4615 /* 4610 usb */
++
++#define BCM4402_DEVICE_ID 0x4402 /* 4402 primary function 0 */
++#define BCM4402_ENET_ID 0x4402 /* 4402 enet */
++#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */
++#define BCM4401_ENET_ID 0x170c /* 4401b0 production enet cards */
++
++#define BCM4301_DEVICE_ID 0x4301 /* 4301 primary function 0 */
++#define BCM4301_D11B_ID 0x4301 /* 4301 802.11b */
++
++#define BCM4307_DEVICE_ID 0x4307 /* 4307 primary function 0 */
++#define BCM4307_V90_ID 0x4305 /* 4307 v90 codec */
++#define BCM4307_ENET_ID 0x4306 /* 4307 enet */
++#define BCM4307_D11B_ID 0x4307 /* 4307 802.11b */
++
++#define BCM4306_DEVICE_ID 0x4306 /* 4306 chipcommon chipid */
++#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */
++#define BCM4306_D11G_ID2 0x4325
++#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */
++#define BCM4306_UART_ID 0x4322 /* 4306 uart */
++#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */
++#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */
++
++#define BCM4309_PKG_ID 1 /* 4309 package id */
++
++#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */
++#define BCM4303_PKG_ID 2 /* 4303 package id */
++
++#define BCM4310_DEVICE_ID 0x4310 /* 4310 chipcommon chipid */
++#define BCM4310_D11B_ID 0x4311 /* 4310 802.11b */
++#define BCM4310_UART_ID 0x4312 /* 4310 uart */
++#define BCM4310_ENET_ID 0x4313 /* 4310 enet */
++#define BCM4310_USB_ID 0x4315 /* 4310 usb */
++
++#define BCMGPRS_UART_ID 0x4333 /* Uart id used by 4306/gprs card */
++#define BCMGPRS2_UART_ID 0x4344 /* Uart id used by 4306/gprs card */
++
++
++#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */
++#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */
++
++#define BCM4317_DEVICE_ID 0x4317 /* 4317 chip common chipid */
++
++#define BCM4318_DEVICE_ID 0x4318 /* 4318 chip common chipid */
++#define BCM4318_D11G_ID 0x4318 /* 4318 801.11b/g id */
++#define BCM4318_D11DUAL_ID 0x4319 /* 4318 801.11a/b/g id */
++#define BCM4318_JTAGM_ID 0x4331 /* 4318 jtagm device id */
++
++#define FPGA_JTAGM_ID 0x4330 /* ??? */
++
++/* Address map */
++#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */
++#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */
++#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */
++#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */
++#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */
++#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */
++
++/* Core register space */
++#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */
++#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */
++#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */
++#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */
++#define BCM4710_REG_USB 0x18004000 /* USB core registers */
++#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */
++#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */
++#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */
++#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */
++
++#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */
++#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */
++#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */
++#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */
++#define BCM4710_PROG 0x1f800000 /* Programable interface */
++#define BCM4710_FLASH 0x1fc00000 /* Flash */
++
++#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */
++
++#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300)
++
++#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000)
++#define BCM4710_LED (BCM4710_EXTIF + 0x00900000)
++
++#define BCM4712_DEVICE_ID 0x4712 /* 4712 chipcommon chipid */
++#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */
++#define BCM4712LARGE_PKG_ID 0 /* 340pin 4712 package id */
++#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */
++#define BCM4712MID_PKG_ID 2 /* 225pin 4712 package id */
++
++#define SDIOH_FPGA_ID 0x4380 /* sdio host fpga */
++
++#define BCM5365_DEVICE_ID 0x5365 /* 5365 chipcommon chipid */
++#define BCM5350_DEVICE_ID 0x5350 /* bcm5350 chipcommon chipid */
++#define BCM5352_DEVICE_ID 0x5352 /* bcm5352 chipcommon chipid */
++
++#define BCM4320_DEVICE_ID 0x4320 /* bcm4320 chipcommon chipid */
++
++/* PCMCIA vendor Id's */
++
++#define VENDOR_BROADCOM_PCMCIA 0x02d0
++
++/* SDIO vendor Id's */
++#define VENDOR_BROADCOM_SDIO 0x00BF
++
++
++/* boardflags */
++#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */
++#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */
++#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */
++#define BFL_ENETROBO 0x0010 /* This board has robo switch or core */
++#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */
++#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */
++#define BFL_ENETVLAN 0x0100 /* This board has vlan capability */
++#define BFL_AFTERBURNER 0x0200 /* This board supports Afterburner mode */
++#define BFL_NOPCI 0x0400 /* This board leaves PCI floating */
++#define BFL_FEM 0x0800 /* This board supports the Front End Module */
++#define BFL_EXTLNA 0x1000 /* This board has an external LNA */
++#define BFL_HGPA 0x2000 /* This board has a high gain PA */
++#define BFL_BTCMOD 0x4000 /* This board' BTCOEXIST is in the alternate gpios */
++#define BFL_ALTIQ 0x8000 /* Alternate I/Q settings */
++
++/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
++#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */
++#define BOARD_GPIO_BTCMOD_IN 0x010 /* bit 4 is the alternate BT Coexistance Input */
++#define BOARD_GPIO_BTCMOD_OUT 0x020 /* bit 5 is the alternate BT Coexistance Out */
++#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */
++#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */
++#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */
++#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
++#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
++#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
++#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
++
++/* Bus types */
++#define SB_BUS 0 /* Silicon Backplane */
++#define PCI_BUS 1 /* PCI target */
++#define PCMCIA_BUS 2 /* PCMCIA target */
++#define SDIO_BUS 3 /* SDIO target */
++#define JTAG_BUS 4 /* JTAG */
++
++/* Allows optimization for single-bus support */
++#ifdef BCMBUSTYPE
++#define BUSTYPE(bus) (BCMBUSTYPE)
++#else
++#define BUSTYPE(bus) (bus)
++#endif
++
++/* power control defines */
++#define PLL_DELAY 150 /* us pll on delay */
++#define FREF_DELAY 200 /* us fref change delay */
++#define MIN_SLOW_CLK 32 /* us Slow clock period */
++#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */
++
++/* Reference Board Types */
++
++#define BU4710_BOARD 0x0400
++#define VSIM4710_BOARD 0x0401
++#define QT4710_BOARD 0x0402
++
++#define BU4610_BOARD 0x0403
++#define VSIM4610_BOARD 0x0404
++
++#define BU4307_BOARD 0x0405
++#define BCM94301CB_BOARD 0x0406
++#define BCM94301PC_BOARD 0x0406 /* Pcmcia 5v card */
++#define BCM94301MP_BOARD 0x0407
++#define BCM94307MP_BOARD 0x0408
++#define BCMAP4307_BOARD 0x0409
++
++#define BU4309_BOARD 0x040a
++#define BCM94309CB_BOARD 0x040b
++#define BCM94309MP_BOARD 0x040c
++#define BCM4309AP_BOARD 0x040d
++
++#define BCM94302MP_BOARD 0x040e
++
++#define VSIM4310_BOARD 0x040f
++#define BU4711_BOARD 0x0410
++#define BCM94310U_BOARD 0x0411
++#define BCM94310AP_BOARD 0x0412
++#define BCM94310MP_BOARD 0x0414
++
++#define BU4306_BOARD 0x0416
++#define BCM94306CB_BOARD 0x0417
++#define BCM94306MP_BOARD 0x0418
++
++#define BCM94710D_BOARD 0x041a
++#define BCM94710R1_BOARD 0x041b
++#define BCM94710R4_BOARD 0x041c
++#define BCM94710AP_BOARD 0x041d
++
++
++#define BU2050_BOARD 0x041f
++
++
++#define BCM94309G_BOARD 0x0421
++
++#define BCM94301PC3_BOARD 0x0422 /* Pcmcia 3.3v card */
++
++#define BU4704_BOARD 0x0423
++#define BU4702_BOARD 0x0424
++
++#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */
++
++#define BU4317_BOARD 0x0426
++
++
++#define BCM94702MN_BOARD 0x0428
++
++/* BCM4702 1U CompactPCI Board */
++#define BCM94702CPCI_BOARD 0x0429
++
++/* BCM4702 with BCM95380 VLAN Router */
++#define BCM95380RR_BOARD 0x042a
++
++/* cb4306 with SiGe PA */
++#define BCM94306CBSG_BOARD 0x042b
++
++/* mp4301 with 2050 radio */
++#define BCM94301MPL_BOARD 0x042c
++
++/* cb4306 with SiGe PA */
++#define PCSG94306_BOARD 0x042d
++
++/* bu4704 with sdram */
++#define BU4704SD_BOARD 0x042e
++
++/* Dual 11a/11g Router */
++#define BCM94704AGR_BOARD 0x042f
++
++/* 11a-only minipci */
++#define BCM94308MP_BOARD 0x0430
++
++
++
++/* BCM94317 boards */
++#define BCM94317CB_BOARD 0x0440
++#define BCM94317MP_BOARD 0x0441
++#define BCM94317PCMCIA_BOARD 0x0442
++#define BCM94317SDIO_BOARD 0x0443
++
++#define BU4712_BOARD 0x0444
++#define BU4712SD_BOARD 0x045d
++#define BU4712L_BOARD 0x045f
++
++/* BCM4712 boards */
++#define BCM94712AP_BOARD 0x0445
++#define BCM94712P_BOARD 0x0446
++
++/* BCM4318 boards */
++#define BU4318_BOARD 0x0447
++#define CB4318_BOARD 0x0448
++#define MPG4318_BOARD 0x0449
++#define MP4318_BOARD 0x044a
++#define SD4318_BOARD 0x044b
++
++/* BCM63XX boards */
++#define BCM96338_BOARD 0x6338
++#define BCM96345_BOARD 0x6345
++#define BCM96348_BOARD 0x6348
++
++/* Another mp4306 with SiGe */
++#define BCM94306P_BOARD 0x044c
++
++/* CF-like 4317 modules */
++#define BCM94317CF_BOARD 0x044d
++
++/* mp4303 */
++#define BCM94303MP_BOARD 0x044e
++
++/* mpsgh4306 */
++#define BCM94306MPSGH_BOARD 0x044f
++
++/* BRCM 4306 w/ Front End Modules */
++#define BCM94306MPM 0x0450
++#define BCM94306MPL 0x0453
++
++/* 4712agr */
++#define BCM94712AGR_BOARD 0x0451
++
++/* The real CF 4317 board */
++#define CFI4317_BOARD 0x0452
++
++/* pcmcia 4303 */
++#define PC4303_BOARD 0x0454
++
++/* 5350K */
++#define BCM95350K_BOARD 0x0455
++
++/* 5350R */
++#define BCM95350R_BOARD 0x0456
++
++/* 4306mplna */
++#define BCM94306MPLNA_BOARD 0x0457
++
++/* 4320 boards */
++#define BU4320_BOARD 0x0458
++#define BU4320S_BOARD 0x0459
++#define BCM94320PH_BOARD 0x045a
++
++/* 4306mph */
++#define BCM94306MPH_BOARD 0x045b
++
++/* 4306pciv */
++#define BCM94306PCIV_BOARD 0x045c
++
++#define BU4712SD_BOARD 0x045d
++
++#define BCM94320PFLSH_BOARD 0x045e
++
++#define BU4712L_BOARD 0x045f
++#define BCM94712LGR_BOARD 0x0460
++#define BCM94320R_BOARD 0x0461
++
++#define BU5352_BOARD 0x0462
++
++#define BCM94318MPGH_BOARD 0x0463
++
++
++#define BCM95352GR_BOARD 0x0467
++
++/* bcm95351agr */
++#define BCM95351AGR_BOARD 0x0470
++
++/* # of GPIO pins */
++#define GPIO_NUMPINS 16
++
++#endif /* _BCMDEVS_H */
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs.h linux.dev/arch/mips/bcm947xx/include/bcmdevs.h
+--- linux.old/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmdevs.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,369 @@
++/*
++ * Broadcom device-specific manifest constants.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id: bcmdevs.h,v 1.1.1.17 2006/04/15 01:29:08 michael Exp $
++ */
++
++#ifndef _BCMDEVS_H
++#define _BCMDEVS_H
++
++#include "bcm4710.h"
++
++/* Known PCI vendor Id's */
++#define VENDOR_EPIGRAM 0xfeda
++#define VENDOR_BROADCOM 0x14e4
++#define VENDOR_3COM 0x10b7
++#define VENDOR_NETGEAR 0x1385
++#define VENDOR_DIAMOND 0x1092
++#define VENDOR_DELL 0x1028
++#define VENDOR_HP 0x0e11
++#define VENDOR_APPLE 0x106b
++
++/* PCI Device Id's */
++#define BCM4210_DEVICE_ID 0x1072 /* never used */
++#define BCM4211_DEVICE_ID 0x4211
++#define BCM4230_DEVICE_ID 0x1086 /* never used */
++#define BCM4231_DEVICE_ID 0x4231
++
++#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */
++#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */
++#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */
++#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */
++
++#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */
++#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */
++
++#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */
++#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */
++
++#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */
++#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */
++#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */
++#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */
++#define BCM47XX_USB_ID 0x4715 /* 47xx usb */
++#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */
++#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */
++#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */
++#define BCM47XX_ROBO_ID 0x4719 /* 47xx/53xx roboswitch core */
++#define BCM47XX_USB20H_ID 0x471a /* 47xx usb 2.0 host */
++#define BCM47XX_USB20D_ID 0x471b /* 47xx usb 2.0 device */
++#define BCM47XX_ATA100_ID 0x471d /* 47xx parallel ATA */
++#define BCM47XX_SATAXOR_ID 0x471e /* 47xx serial ATA & XOR DMA */
++#define BCM47XX_GIGETH_ID 0x471f /* 47xx GbE (5700) */
++
++#define BCM47XX_SMBUS_EMU_ID 0x47fe /* 47xx emulated SMBus device */
++#define BCM47XX_XOR_EMU_ID 0x47ff /* 47xx emulated XOR engine */
++
++#define BCM4710_CHIP_ID 0x4710 /* 4710 chipid returned by sb_chip() */
++#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */
++
++#define BCM4402_CHIP_ID 0x4402 /* 4402 chipid */
++#define BCM4402_ENET_ID 0x4402 /* 4402 enet */
++#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */
++#define BCM4401_ENET_ID 0x170c /* 4401b0 production enet cards */
++
++#define BCM4306_CHIP_ID 0x4306 /* 4306 chipcommon chipid */
++#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */
++#define BCM4306_D11G_ID2 0x4325
++#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */
++#define BCM4306_UART_ID 0x4322 /* 4306 uart */
++#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */
++#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */
++
++#define BCM4309_PKG_ID 1 /* 4309 package id */
++
++#define BCM4311_CHIP_ID 0x4311 /* 4311 PCIe 802.11a/b/g */
++#define BCM4311_D11G_ID 0x4311 /* 4311 802.11b/g id */
++#define BCM4311_D11DUAL_ID 0x4312 /* 4311 802.11a/b/g id */
++#define BCM4311_D11A_ID 0x4313 /* 4311 802.11a id */
++
++#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */
++#define BCM4303_PKG_ID 2 /* 4303 package id */
++
++#define BCMGPRS_UART_ID 0x4333 /* Uart id used by 4306/gprs card */
++#define BCMGPRS2_UART_ID 0x4344 /* Uart id used by 4306/gprs card */
++
++#define BCM4704_CHIP_ID 0x4704 /* 4704 chipcommon chipid */
++#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */
++
++#define BCM4318_CHIP_ID 0x4318 /* 4318 chip common chipid */
++#define BCM4318_D11G_ID 0x4318 /* 4318 802.11b/g id */
++#define BCM4318_D11DUAL_ID 0x4319 /* 4318 802.11a/b/g id */
++#define BCM4318_D11A_ID 0x431a /* 4318 802.11a id */
++
++#define BCM4321_CHIP_ID 0x4321 /* 4321 chip common chipid */
++#define BCM4321_D11N_ID 0x4328 /* 4321 802.11n dualband id */
++#define BCM4321_D11N2G_ID 0x4329 /* 4321 802.11n 2.4Hgz band id */
++#define BCM4321_D11N5G_ID 0x432a /* 4321 802.11n 5Ghz band id */
++
++#define BCM4331_CHIP_ID 0x4331 /* 4331 chip common chipid */
++#define BCM4331_D11N2G_ID 0x4330 /* 4331 802.11n 2.4Ghz band id */
++#define BCM4331_D11N_ID 0x4331 /* 4331 802.11n dualband id */
++#define BCM4331_D11N5G_ID 0x4332 /* 4331 802.11n 5Ghz band id */
++
++#define HDLSIM5350_PKG_ID 1 /* HDL simulator package id for a 5350 */
++#define HDLSIM_PKG_ID 14 /* HDL simulator package id */
++#define HWSIM_PKG_ID 15 /* Hardware simulator package id */
++
++#define BCM4712_CHIP_ID 0x4712 /* 4712 chipcommon chipid */
++#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */
++#define BCM4712LARGE_PKG_ID 0 /* 340pin 4712 package id */
++#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */
++#define BCM4712MID_PKG_ID 2 /* 225pin 4712 package id */
++
++#define BCM5365_CHIP_ID 0x5365 /* 5365 chipcommon chipid */
++#define BCM5350_CHIP_ID 0x5350 /* bcm5350 chipcommon chipid */
++#define BCM5352_CHIP_ID 0x5352 /* bcm5352 chipcommon chipid */
++
++#define BCM4320_CHIP_ID 0x4320 /* bcm4320 chipcommon chipid */
++
++#define BCM4328_CHIP_ID 0x4328 /* bcm4328 chipcommon chipid */
++
++#define FPGA_JTAGM_ID 0x43f0 /* FPGA jtagm device id */
++#define BCM43XX_JTAGM_ID 0x43f1 /* 43xx jtagm device id */
++#define BCM43XXOLD_JTAGM_ID 0x4331 /* 43xx old jtagm device id */
++
++#define SDIOH_FPGA_ID 0x43f2 /* sdio host fpga */
++#define SDIOD_FPGA_ID 0x43f4 /* sdio device fpga */
++
++#define MIMO_FPGA_ID 0x43f8 /* FPGA mimo minimacphy device id */
++
++#define BCM4785_CHIP_ID 0x4785 /* 4785 chipcommon chipid */
++
++/* PCMCIA vendor Id's */
++
++#define VENDOR_BROADCOM_PCMCIA 0x02d0
++
++/* SDIO vendor Id's */
++#define VENDOR_BROADCOM_SDIO 0x00BF
++
++
++/* boardflags */
++#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */
++#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */
++#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */
++#define BFL_ENETROBO 0x0010 /* This board has robo switch or core */
++#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */
++#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */
++#define BFL_ENETVLAN 0x0100 /* This board has vlan capability */
++#define BFL_AFTERBURNER 0x0200 /* This board supports Afterburner mode */
++#define BFL_NOPCI 0x0400 /* This board leaves PCI floating */
++#define BFL_FEM 0x0800 /* This board supports the Front End Module */
++#define BFL_EXTLNA 0x1000 /* This board has an external LNA */
++#define BFL_HGPA 0x2000 /* This board has a high gain PA */
++#define BFL_BTCMOD 0x4000 /* This board' BTCOEXIST is in the alternate gpios */
++#define BFL_ALTIQ 0x8000 /* Alternate I/Q settings */
++
++/* boardflags2 */
++#define BFL2_RXBB_INT_REG_DIS 0x00000001 /* This board has an external rxbb regulator */
++#define BFL2_SSWITCH_AVAIL 0x00000002 /* This board has a superswitch for > 2 antennas */
++#define BFL2_TXPWRCTRL_EN 0x00000004 /* This board permits TX Power Control to be enabled */
++
++/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
++#define BOARD_GPIO_BTCMOD_IN 0x010 /* bit 4 is the alternate BT Coexistance Input */
++#define BOARD_GPIO_BTCMOD_OUT 0x020 /* bit 5 is the alternate BT Coexistance Out */
++#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */
++#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */
++#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */
++#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
++#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
++#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
++#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
++
++/* power control defines */
++#define PLL_DELAY 150 /* us pll on delay */
++#define FREF_DELAY 200 /* us fref change delay */
++#define MIN_SLOW_CLK 32 /* us Slow clock period */
++#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */
++
++/* Reference Board Types */
++
++#define BU4710_BOARD 0x0400
++#define VSIM4710_BOARD 0x0401
++#define QT4710_BOARD 0x0402
++
++#define BU4309_BOARD 0x040a
++#define BCM94309CB_BOARD 0x040b
++#define BCM94309MP_BOARD 0x040c
++#define BCM4309AP_BOARD 0x040d
++
++#define BCM94302MP_BOARD 0x040e
++
++#define BU4306_BOARD 0x0416
++#define BCM94306CB_BOARD 0x0417
++#define BCM94306MP_BOARD 0x0418
++
++#define BCM94710D_BOARD 0x041a
++#define BCM94710R1_BOARD 0x041b
++#define BCM94710R4_BOARD 0x041c
++#define BCM94710AP_BOARD 0x041d
++
++#define BU2050_BOARD 0x041f
++
++
++#define BCM94309G_BOARD 0x0421
++
++#define BU4704_BOARD 0x0423
++#define BU4702_BOARD 0x0424
++
++#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */
++
++
++#define BCM94702MN_BOARD 0x0428
++
++/* BCM4702 1U CompactPCI Board */
++#define BCM94702CPCI_BOARD 0x0429
++
++/* BCM4702 with BCM95380 VLAN Router */
++#define BCM95380RR_BOARD 0x042a
++
++/* cb4306 with SiGe PA */
++#define BCM94306CBSG_BOARD 0x042b
++
++/* cb4306 with SiGe PA */
++#define PCSG94306_BOARD 0x042d
++
++/* bu4704 with sdram */
++#define BU4704SD_BOARD 0x042e
++
++/* Dual 11a/11g Router */
++#define BCM94704AGR_BOARD 0x042f
++
++/* 11a-only minipci */
++#define BCM94308MP_BOARD 0x0430
++
++
++
++#define BU4712_BOARD 0x0444
++#define BU4712SD_BOARD 0x045d
++#define BU4712L_BOARD 0x045f
++
++/* BCM4712 boards */
++#define BCM94712AP_BOARD 0x0445
++#define BCM94712P_BOARD 0x0446
++
++/* BCM4318 boards */
++#define BU4318_BOARD 0x0447
++#define CB4318_BOARD 0x0448
++#define MPG4318_BOARD 0x0449
++#define MP4318_BOARD 0x044a
++#define SD4318_BOARD 0x044b
++
++/* BCM63XX boards */
++#define BCM96338_BOARD 0x6338
++#define BCM96348_BOARD 0x6348
++
++/* Another mp4306 with SiGe */
++#define BCM94306P_BOARD 0x044c
++
++/* mp4303 */
++#define BCM94303MP_BOARD 0x044e
++
++/* mpsgh4306 */
++#define BCM94306MPSGH_BOARD 0x044f
++
++/* BRCM 4306 w/ Front End Modules */
++#define BCM94306MPM 0x0450
++#define BCM94306MPL 0x0453
++
++/* 4712agr */
++#define BCM94712AGR_BOARD 0x0451
++
++/* pcmcia 4303 */
++#define PC4303_BOARD 0x0454
++
++/* 5350K */
++#define BCM95350K_BOARD 0x0455
++
++/* 5350R */
++#define BCM95350R_BOARD 0x0456
++
++/* 4306mplna */
++#define BCM94306MPLNA_BOARD 0x0457
++
++/* 4320 boards */
++#define BU4320_BOARD 0x0458
++#define BU4320S_BOARD 0x0459
++#define BCM94320PH_BOARD 0x045a
++
++/* 4306mph */
++#define BCM94306MPH_BOARD 0x045b
++
++/* 4306pciv */
++#define BCM94306PCIV_BOARD 0x045c
++
++#define BU4712SD_BOARD 0x045d
++
++#define BCM94320PFLSH_BOARD 0x045e
++
++#define BU4712L_BOARD 0x045f
++#define BCM94712LGR_BOARD 0x0460
++#define BCM94320R_BOARD 0x0461
++
++#define BU5352_BOARD 0x0462
++
++#define BCM94318MPGH_BOARD 0x0463
++
++#define BU4311_BOARD 0x0464
++#define BCM94311MC_BOARD 0x0465
++#define BCM94311MCAG_BOARD 0x0466
++
++#define BCM95352GR_BOARD 0x0467
++
++/* bcm95351agr */
++#define BCM95351AGR_BOARD 0x0470
++
++/* bcm94704mpcb */
++#define BCM94704MPCB_BOARD 0x0472
++
++/* 4785 boards */
++#define BU4785_BOARD 0x0478
++
++/* 4321 boards */
++#define BU4321_BOARD 0x046b
++#define BU4321E_BOARD 0x047c
++#define MP4321_BOARD 0x046c
++#define CB2_4321_BOARD 0x046d
++#define MC4321_BOARD 0x046e
++
++/* # of GPIO pins */
++#define GPIO_NUMPINS 16
++
++/* radio ID codes */
++#define NORADIO_ID 0xe4f5
++#define NORADIO_IDCODE 0x4e4f5246
++
++#define BCM2050_ID 0x2050
++#define BCM2050_IDCODE 0x02050000
++#define BCM2050A0_IDCODE 0x1205017f
++#define BCM2050A1_IDCODE 0x2205017f
++#define BCM2050R8_IDCODE 0x8205017f
++
++#define BCM2055_ID 0x2055
++#define BCM2055_IDCODE 0x02055000
++#define BCM2055A0_IDCODE 0x1205517f
++
++#define BCM2060_ID 0x2060
++#define BCM2060_IDCODE 0x02060000
++#define BCM2060WW_IDCODE 0x1206017f
++
++#define BCM2062_ID 0x2062
++#define BCM2062_IDCODE 0x02062000
++#define BCM2062A0_IDCODE 0x0206217f
++
++/* parts of an idcode: */
++#define IDCODE_MFG_MASK 0x00000fff
++#define IDCODE_MFG_SHIFT 0
++#define IDCODE_ID_MASK 0x0ffff000
++#define IDCODE_ID_SHIFT 12
++#define IDCODE_REV_MASK 0xf0000000
++#define IDCODE_REV_SHIFT 28
++
++#endif /* _BCMDEVS_H */
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmendian.h linux.dev/arch/mips/bcm947xx/include/bcmendian.h
+--- linux.old/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmendian.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,198 @@
++/*
++ * local version of endian.h - byte order defines
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: bcmendian.h,v 1.1.1.10 2006/02/27 03:43:16 honor Exp $
++*/
++
++#ifndef _BCMENDIAN_H_
++#define _BCMENDIAN_H_
++
++#include <typedefs.h>
++
++/* Byte swap a 16 bit value */
++#define BCMSWAP16(val) \
++ ((uint16)(\
++ (((uint16)(val) & (uint16)0x00ffU) << 8) | \
++ (((uint16)(val) & (uint16)0xff00U) >> 8)))
++
++/* Byte swap a 32 bit value */
++#define BCMSWAP32(val) \
++ ((uint32)(\
++ (((uint32)(val) & (uint32)0x000000ffUL) << 24) | \
++ (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \
++ (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \
++ (((uint32)(val) & (uint32)0xff000000UL) >> 24)))
++
++/* 2 Byte swap a 32 bit value */
++#define BCMSWAP32BY16(val) \
++ ((uint32)(\
++ (((uint32)(val) & (uint32)0x0000ffffUL) << 16) | \
++ (((uint32)(val) & (uint32)0xffff0000UL) >> 16)))
++
++
++static INLINE uint16
++bcmswap16(uint16 val)
++{
++ return BCMSWAP16(val);
++}
++
++static INLINE uint32
++bcmswap32(uint32 val)
++{
++ return BCMSWAP32(val);
++}
++
++static INLINE uint32
++bcmswap32by16(uint32 val)
++{
++ return BCMSWAP32BY16(val);
++}
++
++/* buf - start of buffer of shorts to swap */
++/* len - byte length of buffer */
++static INLINE void
++bcmswap16_buf(uint16 *buf, uint len)
++{
++ len = len/2;
++
++ while (len--) {
++ *buf = bcmswap16(*buf);
++ buf++;
++ }
++}
++
++#ifndef hton16
++#ifndef IL_BIGENDIAN
++#define HTON16(i) BCMSWAP16(i)
++#define hton16(i) bcmswap16(i)
++#define hton32(i) bcmswap32(i)
++#define ntoh16(i) bcmswap16(i)
++#define ntoh32(i) bcmswap32(i)
++#define ltoh16(i) (i)
++#define ltoh32(i) (i)
++#define htol16(i) (i)
++#define htol32(i) (i)
++#else
++#define HTON16(i) (i)
++#define hton16(i) (i)
++#define hton32(i) (i)
++#define ntoh16(i) (i)
++#define ntoh32(i) (i)
++#define ltoh16(i) bcmswap16(i)
++#define ltoh32(i) bcmswap32(i)
++#define htol16(i) bcmswap16(i)
++#define htol32(i) bcmswap32(i)
++#endif /* IL_BIGENDIAN */
++#endif /* hton16 */
++
++#ifndef IL_BIGENDIAN
++#define ltoh16_buf(buf, i)
++#define htol16_buf(buf, i)
++#else
++#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
++#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
++#endif /* IL_BIGENDIAN */
++
++/*
++* store 16-bit value to unaligned little endian byte array.
++*/
++static INLINE void
++htol16_ua_store(uint16 val, uint8 *bytes)
++{
++ bytes[0] = val&0xff;
++ bytes[1] = val>>8;
++}
++
++/*
++* store 32-bit value to unaligned little endian byte array.
++*/
++static INLINE void
++htol32_ua_store(uint32 val, uint8 *bytes)
++{
++ bytes[0] = val&0xff;
++ bytes[1] = (val>>8)&0xff;
++ bytes[2] = (val>>16)&0xff;
++ bytes[3] = val>>24;
++}
++
++/*
++* store 16-bit value to unaligned network(big) endian byte array.
++*/
++static INLINE void
++hton16_ua_store(uint16 val, uint8 *bytes)
++{
++ bytes[1] = val&0xff;
++ bytes[0] = val>>8;
++}
++
++/*
++* store 32-bit value to unaligned network(big) endian byte array.
++*/
++static INLINE void
++hton32_ua_store(uint32 val, uint8 *bytes)
++{
++ bytes[3] = val&0xff;
++ bytes[2] = (val>>8)&0xff;
++ bytes[1] = (val>>16)&0xff;
++ bytes[0] = val>>24;
++}
++
++/*
++* load 16-bit value from unaligned little endian byte array.
++*/
++static INLINE uint16
++ltoh16_ua(void *bytes)
++{
++ return (((uint8*)bytes)[1]<<8)+((uint8 *)bytes)[0];
++}
++
++/*
++* load 32-bit value from unaligned little endian byte array.
++*/
++static INLINE uint32
++ltoh32_ua(void *bytes)
++{
++ return (((uint8*)bytes)[3]<<24)+(((uint8*)bytes)[2]<<16)+
++ (((uint8*)bytes)[1]<<8)+((uint8*)bytes)[0];
++}
++
++/*
++* load 16-bit value from unaligned big(network) endian byte array.
++*/
++static INLINE uint16
++ntoh16_ua(void *bytes)
++{
++ return (((uint8*)bytes)[0]<<8)+((uint8*)bytes)[1];
++}
++
++/*
++* load 32-bit value from unaligned big(network) endian byte array.
++*/
++static INLINE uint32
++ntoh32_ua(void *bytes)
++{
++ return (((uint8*)bytes)[0]<<24)+(((uint8*)bytes)[1]<<16)+
++ (((uint8*)bytes)[2]<<8)+((uint8*)bytes)[3];
++}
++
++#define ltoh_ua(ptr) (\
++ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \
++ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] : \
++ (((uint8 *)ptr)[3]<<24)+(((uint8 *)ptr)[2]<<16)+(((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] \
++)
++
++#define ntoh_ua(ptr) (\
++ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \
++ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[0]<<8)+((uint8 *)ptr)[1] : \
++ (((uint8 *)ptr)[0]<<24)+(((uint8 *)ptr)[1]<<16)+(((uint8 *)ptr)[2]<<8)+((uint8 *)ptr)[3] \
++)
++
++#endif /* _BCMENDIAN_H_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmnvram.h linux.dev/arch/mips/bcm947xx/include/bcmnvram.h
+--- linux.old/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmnvram.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,159 @@
++/*
++ * NVRAM variable manipulation
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: bcmnvram.h,v 1.17 2006/03/02 12:33:44 honor Exp $
++ */
++
++#ifndef _bcmnvram_h_
++#define _bcmnvram_h_
++
++#ifndef _LANGUAGE_ASSEMBLY
++
++#include <typedefs.h>
++#include <bcmdefs.h>
++
++struct nvram_header {
++ uint32 magic;
++ uint32 len;
++ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */
++ uint32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */
++ uint32 config_ncdl; /* ncdl values for memc */
++};
++
++struct nvram_tuple {
++ char *name;
++ char *value;
++ struct nvram_tuple *next;
++};
++
++/*
++ * Initialize NVRAM access. May be unnecessary or undefined on certain
++ * platforms.
++ */
++extern int nvram_init(void *sbh);
++
++/*
++ * Disable NVRAM access. May be unnecessary or undefined on certain
++ * platforms.
++ */
++extern void nvram_exit(void *sbh);
++
++/*
++ * Get the value of an NVRAM variable. The pointer returned may be
++ * invalid after a set.
++ * @param name name of variable to get
++ * @return value of variable or NULL if undefined
++ */
++extern char * nvram_get(const char *name);
++
++/*
++ * Read the reset GPIO value from the nvram and set the GPIO
++ * as input
++ */
++extern int BCMINITFN(nvram_resetgpio_init)(void *sbh);
++extern int BCMINITFN(nvram_gpio_init)(const char *name, void *sbh);
++extern int BCMINITFN(nvram_gpio_set)(const char *name, void *sbh, int type);
++
++/*
++ * Get the value of an NVRAM variable.
++ * @param name name of variable to get
++ * @return value of variable or NUL if undefined
++ */
++#define nvram_safe_get(name) (nvram_get(name) ? : "")
++
++#define nvram_safe_unset(name) ({ \
++ if(nvram_get(name)) \
++ nvram_unset(name); \
++})
++
++#define nvram_safe_set(name, value) ({ \
++ if(!nvram_get(name) || strcmp(nvram_get(name), value)) \
++ nvram_set(name, value); \
++})
++
++/*
++ * Match an NVRAM variable.
++ * @param name name of variable to match
++ * @param match value to compare against value of variable
++ * @return TRUE if variable is defined and its value is string equal
++ * to match or FALSE otherwise
++ */
++static INLINE int
++nvram_match(char *name, char *match) {
++ const char *value = nvram_get(name);
++ return (value && !strcmp(value, match));
++}
++
++/*
++ * Inversely match an NVRAM variable.
++ * @param name name of variable to match
++ * @param match value to compare against value of variable
++ * @return TRUE if variable is defined and its value is not string
++ * equal to invmatch or FALSE otherwise
++ */
++static INLINE int
++nvram_invmatch(char *name, char *invmatch) {
++ const char *value = nvram_get(name);
++ return (value && strcmp(value, invmatch));
++}
++
++/*
++ * Set the value of an NVRAM variable. The name and value strings are
++ * copied into private storage. Pointers to previously set values
++ * may become invalid. The new value may be immediately
++ * retrieved but will not be permanently stored until a commit.
++ * @param name name of variable to set
++ * @param value value of variable
++ * @return 0 on success and errno on failure
++ */
++extern int nvram_set(const char *name, const char *value);
++
++/*
++ * Unset an NVRAM variable. Pointers to previously set values
++ * remain valid until a set.
++ * @param name name of variable to unset
++ * @return 0 on success and errno on failure
++ * NOTE: use nvram_commit to commit this change to flash.
++ */
++extern int nvram_unset(const char *name);
++
++/*
++ * Commit NVRAM variables to permanent storage. All pointers to values
++ * may be invalid after a commit.
++ * NVRAM values are undefined after a commit.
++ * @return 0 on success and errno on failure
++ */
++extern int nvram_commit(void);
++
++/*
++ * Get all NVRAM variables (format name=value\0 ... \0\0).
++ * @param buf buffer to store variables
++ * @param count size of buffer in bytes
++ * @return 0 on success and errno on failure
++ */
++extern int nvram_getall(char *buf, int count);
++
++extern int file2nvram(char *filename, char *varname);
++extern int nvram2file(char *varname, char *filename);
++
++#endif /* _LANGUAGE_ASSEMBLY */
++
++#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */
++#define NVRAM_CLEAR_MAGIC 0x0
++#define NVRAM_INVALID_MAGIC 0xFFFFFFFF
++#define NVRAM_VERSION 1
++#define NVRAM_HEADER_SIZE 20
++#define NVRAM_SPACE 0x8000
++
++#define NVRAM_MAX_VALUE_LEN 255
++#define NVRAM_MAX_PARAM_LEN 64
++
++#endif /* _bcmnvram_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmsrom.h linux.dev/arch/mips/bcm947xx/include/bcmsrom.h
+--- linux.old/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmsrom.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,108 @@
++/*
++ * Misc useful routines to access NIC local SROM/OTP .
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: bcmsrom.h,v 1.1.1.13 2006/04/15 01:29:08 michael Exp $
++ */
++
++#ifndef _bcmsrom_h_
++#define _bcmsrom_h_
++
++/* Maximum srom: 4 Kilobits == 512 bytes */
++#define SROM_MAX 512
++
++/* SROM Rev 4: Reallocate the software part of the srom to accomodate
++ * MIMO features. It assumes up to two PCIE functions and 440 bytes
++ * of useable srom i.e. the useable storage in chips with OTP that
++ * implements hardware redundancy.
++ */
++
++#define SROM4_WORDS 220
++
++#define SROM4_SIGN 32
++#define SROM4_SIGNATURE 0x5372
++
++#define SROM4_BREV 33
++
++#define SROM4_BFL0 34
++#define SROM4_BFL1 35
++#define SROM4_BFL2 36
++#define SROM4_BFL3 37
++
++#define SROM4_MACHI 38
++#define SROM4_MACMID 39
++#define SROM4_MACLO 40
++
++#define SROM4_CCODE 41
++#define SROM4_REGREV 42
++
++#define SROM4_LEDBH10 43
++#define SROM4_LEDBH32 44
++
++#define SROM4_LEDDC 45
++
++#define SROM4_AA 46
++#define SROM4_AA2G_MASK 0x00ff
++#define SROM4_AA2G_SHIFT 0
++#define SROM4_AA5G_MASK 0xff00
++#define SROM4_AA5G_SHIFT 8
++
++#define SROM4_AG10 47
++#define SROM4_AG32 48
++
++#define SROM4_TXPID2G 49
++#define SROM4_TXPID5G 51
++#define SROM4_TXPID5GL 53
++#define SROM4_TXPID5GH 55
++
++/* Per-path fields */
++#define MAX_PATH 4
++#define SROM4_PATH0 64
++#define SROM4_PATH1 87
++#define SROM4_PATH2 110
++#define SROM4_PATH3 133
++
++#define SROM4_2G_ITT_MAXP 0
++#define SROM4_2G_PA 1
++#define SROM4_5G_ITT_MAXP 5
++#define SROM4_5GLH_MAXP 6
++#define SROM4_5G_PA 7
++#define SROM4_5GL_PA 11
++#define SROM4_5GH_PA 15
++
++/* Fields in the ITT_MAXP and 5GLH_MAXP words */
++#define B2G_MAXP_MASK 0xff
++#define B2G_ITT_SHIFT 8
++#define B5G_MAXP_MASK 0xff
++#define B5G_ITT_SHIFT 8
++#define B5GH_MAXP_MASK 0xff
++#define B5GL_MAXP_SHIFT 8
++
++/* All the miriad power offsets */
++#define SROM4_2G_CCKPO 156
++#define SROM4_2G_OFDMPO 157
++#define SROM4_5G_OFDMPO 159
++#define SROM4_5GL_OFDMPO 161
++#define SROM4_5GH_OFDMPO 163
++#define SROM4_2G_MCSPO 165
++#define SROM4_5G_MCSPO 173
++#define SROM4_5GL_MCSPO 181
++#define SROM4_5GH_MCSPO 189
++#define SROM4_CCDPO 197
++#define SROM4_STBCPO 198
++#define SROM4_BW40PO 199
++#define SROM4_BWDUPPO 200
++
++extern int srom_var_init(void *sbh, uint bus, void *curmap, osl_t *osh, char **vars, uint *count);
++
++extern int srom_read(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf);
++extern int srom_write(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf);
++
++#endif /* _bcmsrom_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmutils.h linux.dev/arch/mips/bcm947xx/include/bcmutils.h
+--- linux.old/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmutils.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,433 @@
++/*
++ * Misc useful os-independent macros and functions.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id: bcmutils.h,v 1.1.1.16 2006/04/08 06:13:39 honor Exp $
++ */
++
++#ifndef _bcmutils_h_
++#define _bcmutils_h_
++
++/* ** driver-only section ** */
++#ifdef BCMDRIVER
++
++#define _BCM_U 0x01 /* upper */
++#define _BCM_L 0x02 /* lower */
++#define _BCM_D 0x04 /* digit */
++#define _BCM_C 0x08 /* cntrl */
++#define _BCM_P 0x10 /* punct */
++#define _BCM_S 0x20 /* white space (space/lf/tab) */
++#define _BCM_X 0x40 /* hex digit */
++#define _BCM_SP 0x80 /* hard space (0x20) */
++
++#define GPIO_PIN_NOTDEFINED 0x20 /* Pin not defined */
++
++extern unsigned char bcm_ctype[];
++#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
++
++#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
++#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
++#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0)
++#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0)
++#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
++#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0)
++#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
++#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0)
++#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0)
++#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0)
++#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
++
++/*
++ * Spin at most 'us' microseconds while 'exp' is true.
++ * Caller should explicitly test 'exp' when this completes
++ * and take appropriate error action if 'exp' is still true.
++ */
++#define SPINWAIT(exp, us) { \
++ uint countdown = (us) + 9; \
++ while ((exp) && (countdown >= 10)) {\
++ OSL_DELAY(10); \
++ countdown -= 10; \
++ } \
++}
++
++struct ether_addr {
++ uint8 octet[6];
++} __attribute__((packed));
++
++/* string */
++extern uchar bcm_toupper(uchar c);
++extern ulong bcm_strtoul(char *cp, char **endp, uint base);
++extern char *bcmstrstr(char *haystack, char *needle);
++extern char *bcmstrcat(char *dest, const char *src);
++extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen);
++/* ethernet address */
++extern char *bcm_ether_ntoa(struct ether_addr *ea, char *buf);
++/* variable access */
++extern char *getvar(char *vars, char *name);
++extern int getintvar(char *vars, char *name);
++extern uint getgpiopin(char *vars, char *pin_name, uint def_pin);
++#ifdef BCMPERFSTATS
++extern void bcm_perf_enable(void);
++extern void bcmstats(char *fmt);
++extern void bcmlog(char *fmt, uint a1, uint a2);
++extern void bcmdumplog(char *buf, int size);
++extern int bcmdumplogent(char *buf, uint idx);
++#else
++#define bcm_perf_enable()
++#define bcmstats(fmt)
++#define bcmlog(fmt, a1, a2)
++#define bcmdumplog(buf, size) *buf = '\0'
++#define bcmdumplogent(buf, idx) -1
++#endif /* BCMPERFSTATS */
++extern char *bcm_nvram_vars(uint *length);
++extern int bcm_nvram_cache(void *sbh);
++
++/* Support for sharing code across in-driver iovar implementations.
++ * The intent is that a driver use this structure to map iovar names
++ * to its (private) iovar identifiers, and the lookup function to
++ * find the entry. Macros are provided to map ids and get/set actions
++ * into a single number space for a switch statement.
++ */
++
++/* iovar structure */
++typedef struct bcm_iovar {
++ const char *name; /* name for lookup and display */
++ uint16 varid; /* id for switch */
++ uint16 flags; /* driver-specific flag bits */
++ uint16 type; /* base type of argument */
++ uint16 minlen; /* min length for buffer vars */
++} bcm_iovar_t;
++
++/* varid definitions are per-driver, may use these get/set bits */
++
++/* IOVar action bits for id mapping */
++#define IOV_GET 0 /* Get an iovar */
++#define IOV_SET 1 /* Set an iovar */
++
++/* Varid to actionid mapping */
++#define IOV_GVAL(id) ((id)*2)
++#define IOV_SVAL(id) (((id)*2)+IOV_SET)
++#define IOV_ISSET(actionid) ((actionid & IOV_SET) == IOV_SET)
++
++/* flags are per-driver based on driver attributes */
++
++/* Base type definitions */
++#define IOVT_VOID 0 /* no value (implictly set only) */
++#define IOVT_BOOL 1 /* any value ok (zero/nonzero) */
++#define IOVT_INT8 2 /* integer values are range-checked */
++#define IOVT_UINT8 3 /* unsigned int 8 bits */
++#define IOVT_INT16 4 /* int 16 bits */
++#define IOVT_UINT16 5 /* unsigned int 16 bits */
++#define IOVT_INT32 6 /* int 32 bits */
++#define IOVT_UINT32 7 /* unsigned int 32 bits */
++#define IOVT_BUFFER 8 /* buffer is size-checked as per minlen */
++
++extern const bcm_iovar_t *bcm_iovar_lookup(const bcm_iovar_t *table, const char *name);
++extern int bcm_iovar_lencheck(const bcm_iovar_t *table, void *arg, int len, bool set);
++
++#endif /* #ifdef BCMDRIVER */
++
++/* ** driver/apps-shared section ** */
++
++#define BCME_STRLEN 64 /* Max string length for BCM errors */
++#define VALID_BCMERROR(e) ((e <= 0) && (e >= BCME_LAST))
++
++
++/*
++ * error codes could be added but the defined ones shouldn't be changed/deleted
++ * these error codes are exposed to the user code
++ * when ever a new error code is added to this list
++ * please update errorstring table with the related error string and
++ * update osl files with os specific errorcode map
++*/
++
++#define BCME_OK 0 /* Success */
++#define BCME_ERROR -1 /* Error generic */
++#define BCME_BADARG -2 /* Bad Argument */
++#define BCME_BADOPTION -3 /* Bad option */
++#define BCME_NOTUP -4 /* Not up */
++#define BCME_NOTDOWN -5 /* Not down */
++#define BCME_NOTAP -6 /* Not AP */
++#define BCME_NOTSTA -7 /* Not STA */
++#define BCME_BADKEYIDX -8 /* BAD Key Index */
++#define BCME_RADIOOFF -9 /* Radio Off */
++#define BCME_NOTBANDLOCKED -10 /* Not band locked */
++#define BCME_NOCLK -11 /* No Clock */
++#define BCME_BADRATESET -12 /* BAD Rate valueset */
++#define BCME_BADBAND -13 /* BAD Band */
++#define BCME_BUFTOOSHORT -14 /* Buffer too short */
++#define BCME_BUFTOOLONG -15 /* Buffer too long */
++#define BCME_BUSY -16 /* Busy */
++#define BCME_NOTASSOCIATED -17 /* Not Associated */
++#define BCME_BADSSIDLEN -18 /* Bad SSID len */
++#define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel */
++#define BCME_BADCHAN -20 /* Bad Channel */
++#define BCME_BADADDR -21 /* Bad Address */
++#define BCME_NORESOURCE -22 /* Not Enough Resources */
++#define BCME_UNSUPPORTED -23 /* Unsupported */
++#define BCME_BADLEN -24 /* Bad length */
++#define BCME_NOTREADY -25 /* Not Ready */
++#define BCME_EPERM -26 /* Not Permitted */
++#define BCME_NOMEM -27 /* No Memory */
++#define BCME_ASSOCIATED -28 /* Associated */
++#define BCME_RANGE -29 /* Not In Range */
++#define BCME_NOTFOUND -30 /* Not Found */
++#define BCME_WME_NOT_ENABLED -31 /* WME Not Enabled */
++#define BCME_TSPEC_NOTFOUND -32 /* TSPEC Not Found */
++#define BCME_ACM_NOTSUPPORTED -33 /* ACM Not Supported */
++#define BCME_NOT_WME_ASSOCIATION -34 /* Not WME Association */
++#define BCME_SDIO_ERROR -35 /* SDIO Bus Error */
++#define BCME_DONGLE_DOWN -36 /* Dongle Not Accessible */
++#define BCME_LAST BCME_DONGLE_DOWN
++
++/* These are collection of BCME Error strings */
++#define BCMERRSTRINGTABLE { \
++ "OK", \
++ "Undefined error", \
++ "Bad Argument", \
++ "Bad Option", \
++ "Not up", \
++ "Not down", \
++ "Not AP", \
++ "Not STA", \
++ "Bad Key Index", \
++ "Radio Off", \
++ "Not band locked", \
++ "No clock", \
++ "Bad Rate valueset", \
++ "Bad Band", \
++ "Buffer too short", \
++ "Buffer too long", \
++ "Busy", \
++ "Not Associated", \
++ "Bad SSID len", \
++ "Out of Range Channel", \
++ "Bad Channel", \
++ "Bad Address", \
++ "Not Enough Resources", \
++ "Unsupported", \
++ "Bad length", \
++ "Not Ready", \
++ "Not Permitted", \
++ "No Memory", \
++ "Associated", \
++ "Not In Range", \
++ "Not Found", \
++ "WME Not Enabled", \
++ "TSPEC Not Found", \
++ "ACM Not Supported", \
++ "Not WME Association", \
++ "SDIO Bus Error", \
++ "Dongle Not Accessible" \
++}
++
++#ifndef ABS
++#define ABS(a) (((a) < 0)?-(a):(a))
++#endif /* ABS */
++
++#ifndef MIN
++#define MIN(a, b) (((a) < (b))?(a):(b))
++#endif /* MIN */
++
++#ifndef MAX
++#define MAX(a, b) (((a) > (b))?(a):(b))
++#endif /* MAX */
++
++#define CEIL(x, y) (((x) + ((y)-1)) / (y))
++#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
++#define ISALIGNED(a, x) (((a) & ((x)-1)) == 0)
++#define ISPOWEROF2(x) ((((x)-1)&(x)) == 0)
++#define VALID_MASK(mask) !((mask) & ((mask) + 1))
++#define OFFSETOF(type, member) ((uint)(uintptr)&((type *)0)->member)
++#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0]))
++
++/* bit map related macros */
++#ifndef setbit
++#ifndef NBBY /* the BSD family defines NBBY */
++#define NBBY 8 /* 8 bits per byte */
++#endif /* #ifndef NBBY */
++#define setbit(a, i) (((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY))
++#define clrbit(a, i) (((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
++#define isset(a, i) (((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY)))
++#define isclr(a, i) ((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
++#endif /* setbit */
++
++#define NBITS(type) (sizeof(type) * 8)
++#define NBITVAL(nbits) (1 << (nbits))
++#define MAXBITVAL(nbits) ((1 << (nbits)) - 1)
++#define NBITMASK(nbits) MAXBITVAL(nbits)
++#define MAXNBVAL(nbyte) MAXBITVAL((nbyte) * 8)
++
++/* basic mux operation - can be optimized on several architectures */
++#define MUX(pred, true, false) ((pred) ? (true) : (false))
++
++/* modulo inc/dec - assumes x E [0, bound - 1] */
++#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1)
++#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1)
++
++/* modulo inc/dec, bound = 2^k */
++#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1))
++#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1))
++
++/* modulo add/sub - assumes x, y E [0, bound - 1] */
++#define MODADD(x, y, bound) \
++ MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y))
++#define MODSUB(x, y, bound) \
++ MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y))
++
++/* module add/sub, bound = 2^k */
++#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1))
++#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1))
++
++/* crc defines */
++#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */
++#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */
++#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */
++#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */
++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
++#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */
++
++/* bcm_format_flags() bit description structure */
++typedef struct bcm_bit_desc {
++ uint32 bit;
++ char* name;
++} bcm_bit_desc_t;
++
++/* tag_ID/length/value_buffer tuple */
++typedef struct bcm_tlv {
++ uint8 id;
++ uint8 len;
++ uint8 data[1];
++} bcm_tlv_t;
++
++/* Check that bcm_tlv_t fits into the given buflen */
++#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len))
++
++/* buffer length for ethernet address from bcm_ether_ntoa() */
++#define ETHER_ADDR_STR_LEN 18 /* 18-bytes of Ethernet address buffer length */
++
++/* unaligned load and store macros */
++#ifdef IL_BIGENDIAN
++static INLINE uint32
++load32_ua(uint8 *a)
++{
++ return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]);
++}
++
++static INLINE void
++store32_ua(uint8 *a, uint32 v)
++{
++ a[0] = (v >> 24) & 0xff;
++ a[1] = (v >> 16) & 0xff;
++ a[2] = (v >> 8) & 0xff;
++ a[3] = v & 0xff;
++}
++
++static INLINE uint16
++load16_ua(uint8 *a)
++{
++ return ((a[0] << 8) | a[1]);
++}
++
++static INLINE void
++store16_ua(uint8 *a, uint16 v)
++{
++ a[0] = (v >> 8) & 0xff;
++ a[1] = v & 0xff;
++}
++
++#else
++
++static INLINE uint32
++load32_ua(uint8 *a)
++{
++ return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]);
++}
++
++static INLINE void
++store32_ua(uint8 *a, uint32 v)
++{
++ a[3] = (v >> 24) & 0xff;
++ a[2] = (v >> 16) & 0xff;
++ a[1] = (v >> 8) & 0xff;
++ a[0] = v & 0xff;
++}
++
++static INLINE uint16
++load16_ua(uint8 *a)
++{
++ return ((a[1] << 8) | a[0]);
++}
++
++static INLINE void
++store16_ua(uint8 *a, uint16 v)
++{
++ a[1] = (v >> 8) & 0xff;
++ a[0] = v & 0xff;
++}
++
++#endif /* IL_BIGENDIAN */
++
++/* externs */
++/* crc */
++extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc);
++extern uint16 hndcrc16(uint8 *p, uint nbytes, uint16 crc);
++extern uint32 hndcrc32(uint8 *p, uint nbytes, uint32 crc);
++/* format/print */
++extern void printfbig(char *buf);
++
++/* IE parsing */
++extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen);
++extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
++extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);
++
++/* bcmerror */
++extern const char *bcmerrorstr(int bcmerror);
++
++/* multi-bool data type: set of bools, mbool is true if any is set */
++typedef uint32 mbool;
++#define mboolset(mb, bit) (mb |= bit) /* set one bool */
++#define mboolclr(mb, bit) (mb &= ~bit) /* clear one bool */
++#define mboolisset(mb, bit) ((mb & bit) != 0) /* TRUE if one bool is set */
++#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val)))
++
++/* power conversion */
++extern uint16 bcm_qdbm_to_mw(uint8 qdbm);
++extern uint8 bcm_mw_to_qdbm(uint16 mw);
++
++/* generic datastruct to help dump routines */
++struct fielddesc {
++ char *nameandfmt;
++ uint32 offset;
++ uint32 len;
++};
++
++/* Buffer structure for collecting string-formatted data
++* using bcm_bprintf() API.
++* Use bcm_binit() to initialize before use
++*/
++struct bcmstrbuf
++{
++ char *buf; /* pointer to current position in origbuf */
++ uint size; /* current (residual) size in bytes */
++ char *origbuf; /* unmodified pointer to orignal buffer */
++ uint origsize; /* unmodified orignal buffer size in bytes */
++};
++
++extern void bcm_binit(struct bcmstrbuf *b, char *buf, uint size);
++extern int bcm_bprintf(struct bcmstrbuf *b, const char *fmt, ...);
++
++typedef uint32 (*readreg_rtn)(void *arg0, void *arg1, uint32 offset);
++extern uint bcmdumpfields(readreg_rtn func_ptr, void *arg0, void *arg1, struct fielddesc *str,
++ char *buf, uint32 bufsize);
++
++extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len);
++extern uint bcm_bitcount(uint8 *bitmap, uint bytelength);
++
++#endif /* _bcmutils_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/hndcpu.h linux.dev/arch/mips/bcm947xx/include/hndcpu.h
+--- linux.old/arch/mips/bcm947xx/include/hndcpu.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/hndcpu.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,28 @@
++/*
++ * HND SiliconBackplane MIPS/ARM cores software interface.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: hndcpu.h,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $
++ */
++
++#ifndef _hndcpu_h_
++#define _hndcpu_h_
++
++#if defined(mips)
++#include <hndmips.h>
++#elif defined(__ARM_ARCH_4T__)
++#include <hndarm.h>
++#endif
++
++extern uint sb_irq(sb_t *sbh);
++extern uint32 sb_cpu_clock(sb_t *sbh);
++extern void sb_cpu_wait(void);
++
++#endif /* _hndcpu_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/hndmips.h linux.dev/arch/mips/bcm947xx/include/hndmips.h
+--- linux.old/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/hndmips.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,45 @@
++/*
++ * HND SiliconBackplane MIPS core software interface.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: hndmips.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $
++ */
++
++#ifndef _hndmips_h_
++#define _hndmips_h_
++
++extern void sb_mips_init(sb_t *sbh, uint shirq_map_base);
++extern bool sb_mips_setclock(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock);
++extern void enable_pfc(uint32 mode);
++extern uint32 sb_memc_get_ncdl(sb_t *sbh);
++
++#if defined(BCMPERFSTATS)
++/* enable counting - exclusive version. Only one set of counters allowed at a time */
++extern void hndmips_perf_instrcount_enable(void);
++extern void hndmips_perf_icachecount_enable(void);
++extern void hndmips_perf_dcachecount_enable(void);
++/* start and stop counting */
++#define hndmips_perf_start01() \
++ MTC0(C0_PERFORMANCE, 4, MFC0(C0_PERFORMANCE, 4) | 0x80008000)
++#define hndmips_perf_stop01() \
++ MTC0(C0_PERFORMANCE, 4, MFC0(C0_PERFORMANCE, 4) & ~0x80008000)
++/* retrieve coutners - counters *decrement* */
++#define hndmips_perf_read0() -(long)(MFC0(C0_PERFORMANCE, 0))
++#define hndmips_perf_read1() -(long)(MFC0(C0_PERFORMANCE, 1))
++#define hndmips_perf_read2() -(long)(MFC0(C0_PERFORMANCE, 2))
++/* enable counting - modular version. Each counters can be enabled separately. */
++extern void hndmips_perf_icache_hit_enable(void);
++extern void hndmips_perf_icache_miss_enable(void);
++extern uint32 hndmips_perf_read_instrcount(void);
++extern uint32 hndmips_perf_read_cache_miss(void);
++extern uint32 hndmips_perf_read_cache_hit(void);
++#endif /* defined(BCMINTERNAL) || defined (BCMPERFSTATS) */
++
++#endif /* _hndmips_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/hndpci.h linux.dev/arch/mips/bcm947xx/include/hndpci.h
+--- linux.old/arch/mips/bcm947xx/include/hndpci.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/hndpci.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,30 @@
++/*
++ * HND SiliconBackplane PCI core software interface.
++ *
++ * $Id: hndpci.h,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ */
++
++#ifndef _hndpci_h_
++#define _hndpci_h_
++
++extern int sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf,
++ int len);
++extern int extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf,
++ int len);
++extern int sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf,
++ int len);
++extern int extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf,
++ int len);
++extern void sbpci_ban(uint16 core);
++extern int sbpci_init(sb_t *sbh);
++extern int sbpci_init_pci(sb_t *sbh);
++extern void sbpci_check(sb_t *sbh);
++
++#endif /* _hndpci_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/linuxver.h linux.dev/arch/mips/bcm947xx/include/linuxver.h
+--- linux.old/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/linuxver.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,417 @@
++/*
++ * Linux-specific abstractions to gain some independence from linux kernel versions.
++ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: linuxver.h,v 1.1.1.10 2006/02/27 03:43:16 honor Exp $
++ */
++
++#ifndef _linuxver_h_
++#define _linuxver_h_
++
++#include <linux/config.h>
++#include <linux/version.h>
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 0))
++/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */
++#ifdef __UNDEF_NO_VERSION__
++#undef __NO_VERSION__
++#else
++#define __NO_VERSION__
++#endif
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 0) */
++
++#if defined(MODULE) && defined(MODVERSIONS)
++#include <linux/modversions.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 5, 0)
++#include <linux/moduleparam.h>
++#endif
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0)
++#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i")
++#define module_param_string(_name_, _string_, _size_, _perm_) \
++ MODULE_PARM(_string_, "c" __MODULE_STRING(_size_))
++#endif
++
++/* linux/malloc.h is deprecated, use linux/slab.h instead. */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 9))
++#include <linux/malloc.h>
++#else
++#include <linux/slab.h>
++#endif
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/pci.h>
++#include <linux/interrupt.h>
++#include <linux/netdevice.h>
++#include <asm/io.h>
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 41))
++#include <linux/workqueue.h>
++#else
++#include <linux/tqueue.h>
++#ifndef work_struct
++#define work_struct tq_struct
++#endif
++#ifndef INIT_WORK
++#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data))
++#endif
++#ifndef schedule_work
++#define schedule_work(_work) schedule_task((_work))
++#endif
++#ifndef flush_scheduled_work
++#define flush_scheduled_work() flush_scheduled_tasks()
++#endif
++#endif /* LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 41) */
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
++/* Some distributions have their own 2.6.x compatibility layers */
++#ifndef IRQ_NONE
++typedef void irqreturn_t;
++#define IRQ_NONE
++#define IRQ_HANDLED
++#define IRQ_RETVAL(x)
++#endif
++#else
++typedef irqreturn_t(*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs);
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0) */
++
++#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
++
++#include <pcmcia/version.h>
++#include <pcmcia/cs_types.h>
++#include <pcmcia/cs.h>
++#include <pcmcia/cistpl.h>
++#include <pcmcia/cisreg.h>
++#include <pcmcia/ds.h>
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 69))
++/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which
++ * does this, but it's not in 2.4 so we do our own for now.
++ */
++static inline void
++cs_error(client_handle_t handle, int func, int ret)
++{
++ error_info_t err = { func, ret };
++ CardServices(ReportError, handle, &err);
++}
++#endif
++
++#endif /* CONFIG_PCMCIA */
++
++#ifndef __exit
++#define __exit
++#endif
++#ifndef __devexit
++#define __devexit
++#endif
++#ifndef __devinit
++#define __devinit __init
++#endif
++#ifndef __devinitdata
++#define __devinitdata
++#endif
++#ifndef __devexit_p
++#define __devexit_p(x) x
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 0))
++
++#define pci_get_drvdata(dev) (dev)->sysdata
++#define pci_set_drvdata(dev, value) (dev)->sysdata = (value)
++
++/*
++ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration
++ */
++
++struct pci_device_id {
++ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
++ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
++ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */
++ unsigned long driver_data; /* Data private to the driver */
++};
++
++struct pci_driver {
++ struct list_head node;
++ char *name;
++ const struct pci_device_id *id_table; /* NULL if wants all devices */
++ int (*probe)(struct pci_dev *dev,
++ const struct pci_device_id *id); /* New device inserted */
++ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug
++ * capable driver)
++ */
++ void (*suspend)(struct pci_dev *dev); /* Device suspended */
++ void (*resume)(struct pci_dev *dev); /* Device woken up */
++};
++
++#define MODULE_DEVICE_TABLE(type, name)
++#define PCI_ANY_ID (~0)
++
++/* compatpci.c */
++#define pci_module_init pci_register_driver
++extern int pci_register_driver(struct pci_driver *drv);
++extern void pci_unregister_driver(struct pci_driver *drv);
++
++#endif /* PCI registration */
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 2, 18))
++#ifdef MODULE
++#define module_init(x) int init_module(void) { return x(); }
++#define module_exit(x) void cleanup_module(void) { x(); }
++#else
++#define module_init(x) __initcall(x);
++#define module_exit(x) __exitcall(x);
++#endif
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 2, 18) */
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 48))
++#define list_for_each(pos, head) \
++ for (pos = (head)->next; pos != (head); pos = pos->next)
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 13))
++#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)])
++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 44))
++#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start)
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 23))
++#define pci_enable_device(dev) do { } while (0)
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 14))
++#define net_device device
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 42))
++
++/*
++ * DMA mapping
++ *
++ * See linux/Documentation/DMA-mapping.txt
++ */
++
++#ifndef PCI_DMA_TODEVICE
++#define PCI_DMA_TODEVICE 1
++#define PCI_DMA_FROMDEVICE 2
++#endif
++
++typedef u32 dma_addr_t;
++
++/* Pure 2^n version of get_order */
++static inline int get_order(unsigned long size)
++{
++ int order;
++
++ size = (size-1) >> (PAGE_SHIFT-1);
++ order = -1;
++ do {
++ size >>= 1;
++ order++;
++ } while (size);
++ return order;
++}
++
++static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
++ dma_addr_t *dma_handle)
++{
++ void *ret;
++ int gfp = GFP_ATOMIC | GFP_DMA;
++
++ ret = (void *)__get_free_pages(gfp, get_order(size));
++
++ if (ret != NULL) {
++ memset(ret, 0, size);
++ *dma_handle = virt_to_bus(ret);
++ }
++ return ret;
++}
++static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
++ void *vaddr, dma_addr_t dma_handle)
++{
++ free_pages((unsigned long)vaddr, get_order(size));
++}
++#ifdef ILSIM
++extern uint pci_map_single(void *dev, void *va, uint size, int direction);
++extern void pci_unmap_single(void *dev, uint pa, uint size, int direction);
++#else
++#define pci_map_single(cookie, address, size, dir) virt_to_bus(address)
++#define pci_unmap_single(cookie, address, size, dir)
++#endif
++
++#endif /* DMA mapping */
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 43))
++
++#define dev_kfree_skb_any(a) dev_kfree_skb(a)
++#define netif_down(dev) do { (dev)->start = 0; } while (0)
++
++/* pcmcia-cs provides its own netdevice compatibility layer */
++#ifndef _COMPAT_NETDEVICE_H
++
++/*
++ * SoftNet
++ *
++ * For pre-softnet kernels we need to tell the upper layer not to
++ * re-enter start_xmit() while we are in there. However softnet
++ * guarantees not to enter while we are in there so there is no need
++ * to do the netif_stop_queue() dance unless the transmit queue really
++ * gets stuck. This should also improve performance according to tests
++ * done by Aman Singla.
++ */
++
++#define dev_kfree_skb_irq(a) dev_kfree_skb(a)
++#define netif_wake_queue(dev) \
++ do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while (0)
++#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy)
++
++static inline void netif_start_queue(struct net_device *dev)
++{
++ dev->tbusy = 0;
++ dev->interrupt = 0;
++ dev->start = 1;
++}
++
++#define netif_queue_stopped(dev) (dev)->tbusy
++#define netif_running(dev) (dev)->start
++
++#endif /* _COMPAT_NETDEVICE_H */
++
++#define netif_device_attach(dev) netif_start_queue(dev)
++#define netif_device_detach(dev) netif_stop_queue(dev)
++
++/* 2.4.x renamed bottom halves to tasklets */
++#define tasklet_struct tq_struct
++static inline void tasklet_schedule(struct tasklet_struct *tasklet)
++{
++ queue_task(tasklet, &tq_immediate);
++ mark_bh(IMMEDIATE_BH);
++}
++
++static inline void tasklet_init(struct tasklet_struct *tasklet,
++ void (*func)(unsigned long),
++ unsigned long data)
++{
++ tasklet->next = NULL;
++ tasklet->sync = 0;
++ tasklet->routine = (void (*)(void *))func;
++ tasklet->data = (void *)data;
++}
++#define tasklet_kill(tasklet) { do{} while (0); }
++
++/* 2.4.x introduced del_timer_sync() */
++#define del_timer_sync(timer) del_timer(timer)
++
++#else
++
++#define netif_down(dev)
++
++#endif /* SoftNet */
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 3))
++
++/*
++ * Emit code to initialise a tq_struct's routine and data pointers
++ */
++#define PREPARE_TQUEUE(_tq, _routine, _data) \
++ do { \
++ (_tq)->routine = _routine; \
++ (_tq)->data = _data; \
++ } while (0)
++
++/*
++ * Emit code to initialise all of a tq_struct
++ */
++#define INIT_TQUEUE(_tq, _routine, _data) \
++ do { \
++ INIT_LIST_HEAD(&(_tq)->list); \
++ (_tq)->sync = 0; \
++ PREPARE_TQUEUE((_tq), (_routine), (_data)); \
++ } while (0)
++
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 3) */
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 6))
++
++/* Power management related routines */
++
++static inline int
++pci_save_state(struct pci_dev *dev, u32 *buffer)
++{
++ int i;
++ if (buffer) {
++ for (i = 0; i < 16; i++)
++ pci_read_config_dword(dev, i * 4, &buffer[i]);
++ }
++ return 0;
++}
++
++static inline int
++pci_restore_state(struct pci_dev *dev, u32 *buffer)
++{
++ int i;
++
++ if (buffer) {
++ for (i = 0; i < 16; i++)
++ pci_write_config_dword(dev, i * 4, buffer[i]);
++ }
++ /*
++ * otherwise, write the context information we know from bootup.
++ * This works around a problem where warm-booting from Windows
++ * combined with a D3(hot)->D0 transition causes PCI config
++ * header data to be forgotten.
++ */
++ else {
++ for (i = 0; i < 6; i ++)
++ pci_write_config_dword(dev,
++ PCI_BASE_ADDRESS_0 + (i * 4),
++ pci_resource_start(dev, i));
++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
++ }
++ return 0;
++}
++
++#endif /* PCI power management */
++
++/* Old cp0 access macros deprecated in 2.4.19 */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 19))
++#define read_c0_count() read_32bit_cp0_register(CP0_COUNT)
++#endif
++
++/* Module refcount handled internally in 2.6.x */
++#ifndef SET_MODULE_OWNER
++#define SET_MODULE_OWNER(dev) do {} while (0)
++#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT
++#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT
++#else
++#define OLD_MOD_INC_USE_COUNT do {} while (0)
++#define OLD_MOD_DEC_USE_COUNT do {} while (0)
++#endif
++
++#ifndef SET_NETDEV_DEV
++#define SET_NETDEV_DEV(net, pdev) do {} while (0)
++#endif
++
++#ifndef HAVE_FREE_NETDEV
++#define free_netdev(dev) kfree(dev)
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
++/* struct packet_type redefined in 2.6.x */
++#define af_packet_priv data
++#endif
++
++#endif /* _linuxver_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/mipsinc.h linux.dev/arch/mips/bcm947xx/include/mipsinc.h
+--- linux.old/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/mipsinc.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,541 @@
++/*
++ * HND Run Time Environment for standalone MIPS programs.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: mipsinc.h,v 1.1.1.5 2006/02/27 03:43:16 honor Exp $
++ */
++
++#ifndef _MISPINC_H
++#define _MISPINC_H
++
++
++/* MIPS defines */
++
++#ifdef _LANGUAGE_ASSEMBLY
++
++/*
++ * Symbolic register names for 32 bit ABI
++ */
++#define zero $0 /* wired zero */
++#define AT $1 /* assembler temp - uppercase because of ".set at" */
++#define v0 $2 /* return value */
++#define v1 $3
++#define a0 $4 /* argument registers */
++#define a1 $5
++#define a2 $6
++#define a3 $7
++#define t0 $8 /* caller saved */
++#define t1 $9
++#define t2 $10
++#define t3 $11
++#define t4 $12
++#define t5 $13
++#define t6 $14
++#define t7 $15
++#define s0 $16 /* callee saved */
++#define s1 $17
++#define s2 $18
++#define s3 $19
++#define s4 $20
++#define s5 $21
++#define s6 $22
++#define s7 $23
++#define t8 $24 /* caller saved */
++#define t9 $25
++#define jp $25 /* PIC jump register */
++#define k0 $26 /* kernel scratch */
++#define k1 $27
++#define gp $28 /* global pointer */
++#define sp $29 /* stack pointer */
++#define fp $30 /* frame pointer */
++#define s8 $30 /* same like fp! */
++#define ra $31 /* return address */
++
++
++/* CP0 Registers */
++
++#define C0_INX $0
++#define C0_RAND $1
++#define C0_TLBLO0 $2
++#define C0_TLBLO C0_TLBLO0
++#define C0_TLBLO1 $3
++#define C0_CTEXT $4
++#define C0_PGMASK $5
++#define C0_WIRED $6
++#define C0_BADVADDR $8
++#define C0_COUNT $9
++#define C0_TLBHI $10
++#define C0_COMPARE $11
++#define C0_SR $12
++#define C0_STATUS C0_SR
++#define C0_CAUSE $13
++#define C0_EPC $14
++#define C0_PRID $15
++#define C0_CONFIG $16
++#define C0_LLADDR $17
++#define C0_WATCHLO $18
++#define C0_WATCHHI $19
++#define C0_XCTEXT $20
++#define C0_DIAGNOSTIC $22
++#define C0_BROADCOM C0_DIAGNOSTIC
++#define C0_PERFORMANCE $25
++#define C0_ECC $26
++#define C0_CACHEERR $27
++#define C0_TAGLO $28
++#define C0_TAGHI $29
++#define C0_ERREPC $30
++#define C0_DESAVE $31
++
++/*
++ * LEAF - declare leaf routine
++ */
++#define LEAF(symbol) \
++ .globl symbol; \
++ .align 2; \
++ .type symbol, @function; \
++ .ent symbol, 0; \
++symbol: .frame sp, 0, ra
++
++/*
++ * END - mark end of function
++ */
++#define END(function) \
++ .end function; \
++ .size function, . - function
++
++#define _ULCAST_
++
++#define MFC0_SEL(dst, src, sel) \
++ .word\t(0x40000000 | ((dst) << 16) | ((src) << 11) | (sel))
++
++
++#define MTC0_SEL(dst, src, sel) \
++ .word\t(0x40800000 | ((dst) << 16) | ((src) << 11) | (sel))
++
++#else
++
++/*
++ * The following macros are especially useful for __asm__
++ * inline assembler.
++ */
++#ifndef __STR
++#define __STR(x) #x
++#endif
++#ifndef STR
++#define STR(x) __STR(x)
++#endif
++
++#define _ULCAST_ (unsigned long)
++
++
++/* CP0 Registers */
++
++#define C0_INX 0 /* CP0: TLB Index */
++#define C0_RAND 1 /* CP0: TLB Random */
++#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */
++#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */
++#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */
++#define C0_CTEXT 4 /* CP0: Context */
++#define C0_PGMASK 5 /* CP0: TLB PageMask */
++#define C0_WIRED 6 /* CP0: TLB Wired */
++#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */
++#define C0_COUNT 9 /* CP0: Count */
++#define C0_TLBHI 10 /* CP0: TLB EntryHi */
++#define C0_COMPARE 11 /* CP0: Compare */
++#define C0_SR 12 /* CP0: Processor Status */
++#define C0_STATUS C0_SR /* CP0: Processor Status */
++#define C0_CAUSE 13 /* CP0: Exception Cause */
++#define C0_EPC 14 /* CP0: Exception PC */
++#define C0_PRID 15 /* CP0: Processor Revision Indentifier */
++#define C0_CONFIG 16 /* CP0: Config */
++#define C0_LLADDR 17 /* CP0: LLAddr */
++#define C0_WATCHLO 18 /* CP0: WatchpointLo */
++#define C0_WATCHHI 19 /* CP0: WatchpointHi */
++#define C0_XCTEXT 20 /* CP0: XContext */
++#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */
++#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */
++#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */
++#define C0_ECC 26 /* CP0: ECC */
++#define C0_CACHEERR 27 /* CP0: CacheErr */
++#define C0_TAGLO 28 /* CP0: TagLo */
++#define C0_TAGHI 29 /* CP0: TagHi */
++#define C0_ERREPC 30 /* CP0: ErrorEPC */
++#define C0_DESAVE 31 /* CP0: DebugSave */
++
++#endif /* _LANGUAGE_ASSEMBLY */
++
++/*
++ * Memory segments (32bit kernel mode addresses)
++ */
++#undef KUSEG
++#undef KSEG0
++#undef KSEG1
++#undef KSEG2
++#undef KSEG3
++#define KUSEG 0x00000000
++#define KSEG0 0x80000000
++#define KSEG1 0xa0000000
++#define KSEG2 0xc0000000
++#define KSEG3 0xe0000000
++#define PHYSADDR_MASK 0x1fffffff
++
++/*
++ * Map an address to a certain kernel segment
++ */
++#undef PHYSADDR
++#undef KSEG0ADDR
++#undef KSEG1ADDR
++#undef KSEG2ADDR
++#undef KSEG3ADDR
++
++#define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK)
++#define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0)
++#define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1)
++#define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2)
++#define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3)
++
++
++#ifndef Index_Invalidate_I
++/*
++ * Cache Operations
++ */
++#define Index_Invalidate_I 0x00
++#define Index_Writeback_Inv_D 0x01
++#define Index_Invalidate_SI 0x02
++#define Index_Writeback_Inv_SD 0x03
++#define Index_Load_Tag_I 0x04
++#define Index_Load_Tag_D 0x05
++#define Index_Load_Tag_SI 0x06
++#define Index_Load_Tag_SD 0x07
++#define Index_Store_Tag_I 0x08
++#define Index_Store_Tag_D 0x09
++#define Index_Store_Tag_SI 0x0A
++#define Index_Store_Tag_SD 0x0B
++#define Create_Dirty_Excl_D 0x0d
++#define Create_Dirty_Excl_SD 0x0f
++#define Hit_Invalidate_I 0x10
++#define Hit_Invalidate_D 0x11
++#define Hit_Invalidate_SI 0x12
++#define Hit_Invalidate_SD 0x13
++#define Fill_I 0x14
++#define Hit_Writeback_Inv_D 0x15
++ /* 0x16 is unused */
++#define Hit_Writeback_Inv_SD 0x17
++#define R5K_Page_Invalidate_S 0x17
++#define Hit_Writeback_I 0x18
++#define Hit_Writeback_D 0x19
++ /* 0x1a is unused */
++#define Hit_Writeback_SD 0x1b
++ /* 0x1c is unused */
++ /* 0x1e is unused */
++#define Hit_Set_Virtual_SI 0x1e
++#define Hit_Set_Virtual_SD 0x1f
++#endif /* !Index_Invalidate_I */
++
++
++/*
++ * R4x00 interrupt enable / cause bits
++ */
++#define IE_SW0 (_ULCAST_(1) << 8)
++#define IE_SW1 (_ULCAST_(1) << 9)
++#define IE_IRQ0 (_ULCAST_(1) << 10)
++#define IE_IRQ1 (_ULCAST_(1) << 11)
++#define IE_IRQ2 (_ULCAST_(1) << 12)
++#define IE_IRQ3 (_ULCAST_(1) << 13)
++#define IE_IRQ4 (_ULCAST_(1) << 14)
++#define IE_IRQ5 (_ULCAST_(1) << 15)
++
++#ifndef ST0_UM
++/*
++ * Bitfields in the mips32 cp0 status register
++ */
++#define ST0_IE 0x00000001
++#define ST0_EXL 0x00000002
++#define ST0_ERL 0x00000004
++#define ST0_UM 0x00000010
++#define ST0_SWINT0 0x00000100
++#define ST0_SWINT1 0x00000200
++#define ST0_HWINT0 0x00000400
++#define ST0_HWINT1 0x00000800
++#define ST0_HWINT2 0x00001000
++#define ST0_HWINT3 0x00002000
++#define ST0_HWINT4 0x00004000
++#define ST0_HWINT5 0x00008000
++#define ST0_IM 0x0000ff00
++#define ST0_NMI 0x00080000
++#define ST0_SR 0x00100000
++#define ST0_TS 0x00200000
++#define ST0_BEV 0x00400000
++#define ST0_RE 0x02000000
++#define ST0_RP 0x08000000
++#define ST0_CU 0xf0000000
++#define ST0_CU0 0x10000000
++#define ST0_CU1 0x20000000
++#define ST0_CU2 0x40000000
++#define ST0_CU3 0x80000000
++#endif /* !ST0_UM */
++
++
++/*
++ * Bitfields in the mips32 cp0 cause register
++ */
++#define C_EXC 0x0000007c
++#define C_EXC_SHIFT 2
++#define C_INT 0x0000ff00
++#define C_INT_SHIFT 8
++#define C_SW0 (_ULCAST_(1) << 8)
++#define C_SW1 (_ULCAST_(1) << 9)
++#define C_IRQ0 (_ULCAST_(1) << 10)
++#define C_IRQ1 (_ULCAST_(1) << 11)
++#define C_IRQ2 (_ULCAST_(1) << 12)
++#define C_IRQ3 (_ULCAST_(1) << 13)
++#define C_IRQ4 (_ULCAST_(1) << 14)
++#define C_IRQ5 (_ULCAST_(1) << 15)
++#define C_WP 0x00400000
++#define C_IV 0x00800000
++#define C_CE 0x30000000
++#define C_CE_SHIFT 28
++#define C_BD 0x80000000
++
++/* Values in C_EXC */
++#define EXC_INT 0
++#define EXC_TLBM 1
++#define EXC_TLBL 2
++#define EXC_TLBS 3
++#define EXC_AEL 4
++#define EXC_AES 5
++#define EXC_IBE 6
++#define EXC_DBE 7
++#define EXC_SYS 8
++#define EXC_BPT 9
++#define EXC_RI 10
++#define EXC_CU 11
++#define EXC_OV 12
++#define EXC_TR 13
++#define EXC_WATCH 23
++#define EXC_MCHK 24
++
++
++/*
++ * Bits in the cp0 config register.
++ */
++#define CONF_CM_CACHABLE_NO_WA 0
++#define CONF_CM_CACHABLE_WA 1
++#define CONF_CM_UNCACHED 2
++#define CONF_CM_CACHABLE_NONCOHERENT 3
++#define CONF_CM_CACHABLE_CE 4
++#define CONF_CM_CACHABLE_COW 5
++#define CONF_CM_CACHABLE_CUW 6
++#define CONF_CM_CACHABLE_ACCELERATED 7
++#define CONF_CM_CMASK 7
++#define CONF_CU (_ULCAST_(1) << 3)
++#define CONF_DB (_ULCAST_(1) << 4)
++#define CONF_IB (_ULCAST_(1) << 5)
++#define CONF_SE (_ULCAST_(1) << 12)
++#ifndef CONF_BE /* duplicate in mipsregs.h */
++#define CONF_BE (_ULCAST_(1) << 15)
++#endif
++#define CONF_SC (_ULCAST_(1) << 17)
++#define CONF_AC (_ULCAST_(1) << 23)
++#define CONF_HALT (_ULCAST_(1) << 25)
++#ifndef CONF_M /* duplicate in mipsregs.h */
++#define CONF_M (_ULCAST_(1) << 31)
++#endif
++
++
++/*
++ * Bits in the cp0 config register select 1.
++ */
++#define CONF1_FP 0x00000001 /* FPU present */
++#define CONF1_EP 0x00000002 /* EJTAG present */
++#define CONF1_CA 0x00000004 /* mips16 implemented */
++#define CONF1_WR 0x00000008 /* Watch registers present */
++#define CONF1_PC 0x00000010 /* Performance counters present */
++#define CONF1_DA_SHIFT 7 /* D$ associativity */
++#define CONF1_DA_MASK 0x00000380
++#define CONF1_DA_BASE 1
++#define CONF1_DL_SHIFT 10 /* D$ line size */
++#define CONF1_DL_MASK 0x00001c00
++#define CONF1_DL_BASE 2
++#define CONF1_DS_SHIFT 13 /* D$ sets/way */
++#define CONF1_DS_MASK 0x0000e000
++#define CONF1_DS_BASE 64
++#define CONF1_IA_SHIFT 16 /* I$ associativity */
++#define CONF1_IA_MASK 0x00070000
++#define CONF1_IA_BASE 1
++#define CONF1_IL_SHIFT 19 /* I$ line size */
++#define CONF1_IL_MASK 0x00380000
++#define CONF1_IL_BASE 2
++#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
++#define CONF1_IS_MASK 0x01c00000
++#define CONF1_IS_BASE 64
++#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */
++#define CONF1_MS_SHIFT 25
++
++/* PRID register */
++#define PRID_COPT_MASK 0xff000000
++#define PRID_COMP_MASK 0x00ff0000
++#define PRID_IMP_MASK 0x0000ff00
++#define PRID_REV_MASK 0x000000ff
++
++#define PRID_COMP_LEGACY 0x000000
++#define PRID_COMP_MIPS 0x010000
++#define PRID_COMP_BROADCOM 0x020000
++#define PRID_COMP_ALCHEMY 0x030000
++#define PRID_COMP_SIBYTE 0x040000
++#define PRID_IMP_BCM4710 0x4000
++#define PRID_IMP_BCM3302 0x9000
++#define PRID_IMP_BCM3303 0x9100
++
++#define PRID_IMP_UNKNOWN 0xff00
++
++#define BCM330X(id) \
++ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == \
++ (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) || \
++ ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == \
++ (PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
++
++/* Bits in C0_BROADCOM */
++#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */
++#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */
++#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */
++#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */
++#define BRCM_CLF_ENABLE 0x00100000 /* Enable cache line first feature */
++
++/* PreFetch Cache aka Read Ahead Cache */
++
++#define PFC_CR0 0xff400000 /* control reg 0 */
++#define PFC_CR1 0xff400004 /* control reg 1 */
++
++/* PFC operations */
++#define PFC_I 0x00000001 /* Enable PFC use for instructions */
++#define PFC_D 0x00000002 /* Enable PFC use for data */
++#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */
++#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */
++#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */
++#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */
++#define PFC_DPF 0x00000040 /* Enable directional prefetching */
++#define PFC_FLUSH 0x00000100 /* Flush the PFC */
++#define PFC_BRR 0x40000000 /* Bus error indication */
++#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */
++
++/* Handy defaults */
++#define PFC_DISABLED 0
++#define PFC_AUTO 0xffffffff /* auto select the default mode */
++#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV)
++#define PFC_INST_NOPF (PFC_I | PFC_CINV)
++#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV)
++#define PFC_DATA_NOPF (PFC_D | PFC_CINV)
++#define PFC_I_AND_D (PFC_INST | PFC_DATA)
++#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF)
++
++#ifndef _LANGUAGE_ASSEMBLY
++
++/*
++ * Macros to access the system control coprocessor
++ */
++
++#define MFC0(source, sel) \
++({ \
++ int __res; \
++ __asm__ __volatile__(" \
++ .set\tnoreorder; \
++ .set\tnoat; \
++ .word\t"STR(0x40010000 | ((source) << 11) | (sel))"; \
++ move\t%0, $1; \
++ .set\tat; \
++ .set\treorder" \
++ :"=r" (__res) \
++ : \
++ :"$1"); \
++ __res; \
++})
++
++#define MTC0(source, sel, value) \
++do { \
++ __asm__ __volatile__(" \
++ .set\tnoreorder; \
++ .set\tnoat; \
++ move\t$1, %z0; \
++ .word\t"STR(0x40810000 | ((source) << 11) | (sel))"; \
++ .set\tat; \
++ .set\treorder" \
++ : \
++ :"jr" (value) \
++ :"$1"); \
++} while (0)
++
++#define get_c0_count() \
++({ \
++ int __res; \
++ __asm__ __volatile__(" \
++ .set\tnoreorder; \
++ .set\tnoat; \
++ mfc0\t%0, $9; \
++ .set\tat; \
++ .set\treorder" \
++ :"=r" (__res)); \
++ __res; \
++})
++
++static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize)
++{
++ uint lsz, sets, ways;
++
++ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
++ if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT)))
++ lsz = CONF1_IL_BASE << lsz;
++ sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT);
++ ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT);
++ *size = lsz * sets * ways;
++ *lsize = lsz;
++}
++
++static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize)
++{
++ uint lsz, sets, ways;
++
++ /* Data Cache Size = Associativity * Line Size * Sets Per Way */
++ if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT)))
++ lsz = CONF1_DL_BASE << lsz;
++ sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT);
++ ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT);
++ *size = lsz * sets * ways;
++ *lsize = lsz;
++}
++
++#define cache_op(base, op) \
++ __asm__ __volatile__(" \
++ .set noreorder; \
++ .set mips3; \
++ cache %1, (%0); \
++ .set mips0; \
++ .set reorder" \
++ : \
++ : "r" (base), \
++ "i" (op));
++
++#define cache_unroll4(base, delta, op) \
++ __asm__ __volatile__(" \
++ .set noreorder; \
++ .set mips3; \
++ cache %1, 0(%0); \
++ cache %1, delta(%0); \
++ cache %1, (2 * delta)(%0); \
++ cache %1, (3 * delta)(%0); \
++ .set mips0; \
++ .set reorder" \
++ : \
++ : "r" (base), \
++ "i" (op));
++
++#endif /* !_LANGUAGE_ASSEMBLY */
++
++#endif /* _MISPINC_H */
+diff -urN linux.old/arch/mips/bcm947xx/include/osl.h linux.dev/arch/mips/bcm947xx/include/osl.h
+--- linux.old/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/osl.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,179 @@
++#ifndef __osl_h
++#define __osl_h
++
++#include <linux/delay.h>
++#include <typedefs.h>
++#include <linuxver.h>
++#include <bcmutils.h>
++#include <pcicfg.h>
++
++#define ASSERT(n)
++
++/* Pkttag flag should be part of public information */
++struct osl_pubinfo {
++ bool pkttag;
++ uint pktalloced; /* Number of allocated packet buffers */
++};
++
++struct osl_info {
++ struct osl_pubinfo pub;
++ uint magic;
++ void *pdev;
++ uint malloced;
++ uint failed;
++ void *dbgmem_list;
++};
++
++typedef struct osl_info osl_t;
++
++#define PCI_CFG_RETRY 10
++
++/* map/unmap direction */
++#define DMA_TX 1 /* TX direction for DMA */
++#define DMA_RX 2 /* RX direction for DMA */
++
++#define AND_REG(osh, r, v) W_REG(osh, (r), R_REG(osh, r) & (v))
++#define OR_REG(osh, r, v) W_REG(osh, (r), R_REG(osh, r) | (v))
++#define SET_REG(osh, r, mask, val) W_REG((osh), (r), ((R_REG((osh), r) & ~(mask)) | (val)))
++
++/* bcopy, bcmp, and bzero */
++#define bcopy(src, dst, len) memcpy((dst), (src), (len))
++#define bcmp(b1, b2, len) memcmp((b1), (b2), (len))
++#define bzero(b, len) memset((b), '\0', (len))
++
++/* uncached virtual address */
++#ifdef mips
++#define OSL_UNCACHED(va) KSEG1ADDR((va))
++#include <asm/addrspace.h>
++#else
++#define OSL_UNCACHED(va) (va)
++#endif /* mips */
++
++
++#ifndef IL_BIGENDIAN
++#define R_REG(osh, r) (\
++ sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \
++ sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \
++ readl((volatile uint32*)(r)) \
++)
++#define W_REG(osh, r, v) do { \
++ switch (sizeof(*(r))) { \
++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \
++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \
++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \
++ } \
++} while (0)
++#else /* IL_BIGENDIAN */
++#define R_REG(osh, r) ({ \
++ __typeof(*(r)) __osl_v; \
++ switch (sizeof(*(r))) { \
++ case sizeof(uint8): __osl_v = readb((volatile uint8*)((uint32)r^3)); break; \
++ case sizeof(uint16): __osl_v = readw((volatile uint16*)((uint32)r^2)); break; \
++ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \
++ } \
++ __osl_v; \
++})
++#define W_REG(osh, r, v) do { \
++ switch (sizeof(*(r))) { \
++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \
++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \
++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \
++ } \
++} while (0)
++#endif /* IL_BIGENDIAN */
++
++/* dereference an address that may cause a bus exception */
++#define BUSPROBE(val, addr) get_dbe((val), (addr))
++#include <asm/paccess.h>
++
++/* map/unmap physical to virtual I/O */
++#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size))
++#define REG_UNMAP(va) iounmap((void *)(va))
++
++/* shared (dma-able) memory access macros */
++#define R_SM(r) *(r)
++#define W_SM(r, v) (*(r) = (v))
++#define BZERO_SM(r, len) memset((r), '\0', (len))
++
++#define MALLOC(osh, size) kmalloc((size), GFP_ATOMIC)
++#define MFREE(osh, addr, size) kfree((addr))
++#define MALLOCED(osh) (0)
++
++#define osl_delay OSL_DELAY
++static inline void OSL_DELAY(uint usec)
++{
++ uint d;
++
++ while (usec > 0) {
++ d = MIN(usec, 1000);
++ udelay(d);
++ usec -= d;
++ }
++}
++
++static inline void
++bcm_mdelay(uint ms)
++{
++ uint i;
++
++ for (i = 0; i < ms; i++) {
++ OSL_DELAY(1000);
++ }
++}
++
++
++#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size)
++#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size)
++
++#define OSL_PCI_READ_CONFIG(osh, offset, size) \
++ osl_pci_read_config((osh), (offset), (size))
++
++static inline uint32
++osl_pci_read_config(osl_t *osh, uint offset, uint size)
++{
++ uint val;
++ uint retry = PCI_CFG_RETRY;
++
++ do {
++ pci_read_config_dword(osh->pdev, offset, &val);
++ if (val != 0xffffffff)
++ break;
++ } while (retry--);
++
++ return (val);
++}
++
++#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \
++ osl_pci_write_config((osh), (offset), (size), (val))
++static inline void
++osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val)
++{
++ uint retry = PCI_CFG_RETRY;
++
++ do {
++ pci_write_config_dword(osh->pdev, offset, val);
++ if (offset != PCI_BAR0_WIN)
++ break;
++ if (osl_pci_read_config(osh, offset, size) == val)
++ break;
++ } while (retry--);
++}
++
++
++/* return bus # for the pci device pointed by osh->pdev */
++#define OSL_PCI_BUS(osh) osl_pci_bus(osh)
++static inline uint
++osl_pci_bus(osl_t *osh)
++{
++ return ((struct pci_dev *)osh->pdev)->bus->number;
++}
++
++/* return slot # for the pci device pointed by osh->pdev */
++#define OSL_PCI_SLOT(osh) osl_pci_slot(osh)
++static inline uint
++osl_pci_slot(osl_t *osh)
++{
++ return PCI_SLOT(((struct pci_dev *)osh->pdev)->devfn);
++}
++
++#endif
+diff -urN linux.old/arch/mips/bcm947xx/include/pcicfg.h linux.dev/arch/mips/bcm947xx/include/pcicfg.h
+--- linux.old/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/pcicfg.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,495 @@
++/*
++ * pcicfg.h: PCI configuration constants and structures.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: pcicfg.h,v 1.1.1.11 2006/04/08 06:13:40 honor Exp $
++ */
++
++#ifndef _h_pcicfg_
++#define _h_pcicfg_
++
++/* The following inside ifndef's so we don't collide with NTDDK.H */
++#ifndef PCI_MAX_BUS
++#define PCI_MAX_BUS 0x100
++#endif
++#ifndef PCI_MAX_DEVICES
++#define PCI_MAX_DEVICES 0x20
++#endif
++#ifndef PCI_MAX_FUNCTION
++#define PCI_MAX_FUNCTION 0x8
++#endif
++
++#ifndef PCI_INVALID_VENDORID
++#define PCI_INVALID_VENDORID 0xffff
++#endif
++#ifndef PCI_INVALID_DEVICEID
++#define PCI_INVALID_DEVICEID 0xffff
++#endif
++
++
++/* Convert between bus-slot-function-register and config addresses */
++
++#define PCICFG_BUS_SHIFT 16 /* Bus shift */
++#define PCICFG_SLOT_SHIFT 11 /* Slot shift */
++#define PCICFG_FUN_SHIFT 8 /* Function shift */
++#define PCICFG_OFF_SHIFT 0 /* Register shift */
++
++#define PCICFG_BUS_MASK 0xff /* Bus mask */
++#define PCICFG_SLOT_MASK 0x1f /* Slot mask */
++#define PCICFG_FUN_MASK 7 /* Function mask */
++#define PCICFG_OFF_MASK 0xff /* Bus mask */
++
++#define PCI_CONFIG_ADDR(b, s, f, o) \
++ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \
++ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \
++ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \
++ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT))
++
++#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK)
++#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK)
++#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK)
++#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK)
++
++/* PCIE Config space accessing MACROS */
++
++#define PCIECFG_BUS_SHIFT 24 /* Bus shift */
++#define PCIECFG_SLOT_SHIFT 19 /* Slot/Device shift */
++#define PCIECFG_FUN_SHIFT 16 /* Function shift */
++#define PCIECFG_OFF_SHIFT 0 /* Register shift */
++
++#define PCIECFG_BUS_MASK 0xff /* Bus mask */
++#define PCIECFG_SLOT_MASK 0x1f /* Slot/Device mask */
++#define PCIECFG_FUN_MASK 7 /* Function mask */
++#define PCIECFG_OFF_MASK 0x3ff /* Register mask */
++
++#define PCIE_CONFIG_ADDR(b, s, f, o) \
++ ((((b) & PCIECFG_BUS_MASK) << PCIECFG_BUS_SHIFT) \
++ | (((s) & PCIECFG_SLOT_MASK) << PCIECFG_SLOT_SHIFT) \
++ | (((f) & PCIECFG_FUN_MASK) << PCIECFG_FUN_SHIFT) \
++ | (((o) & PCIECFG_OFF_MASK) << PCIECFG_OFF_SHIFT))
++
++#define PCIE_CONFIG_BUS(a) (((a) >> PCIECFG_BUS_SHIFT) & PCIECFG_BUS_MASK)
++#define PCIE_CONFIG_SLOT(a) (((a) >> PCIECFG_SLOT_SHIFT) & PCIECFG_SLOT_MASK)
++#define PCIE_CONFIG_FUN(a) (((a) >> PCIECFG_FUN_SHIFT) & PCIECFG_FUN_MASK)
++#define PCIE_CONFIG_OFF(a) (((a) >> PCIECFG_OFF_SHIFT) & PCIECFG_OFF_MASK)
++
++/* The actual config space */
++
++#define PCI_BAR_MAX 6
++
++#define PCI_ROM_BAR 8
++
++#define PCR_RSVDA_MAX 2
++
++/* Bits in PCI bars' flags */
++
++#define PCIBAR_FLAGS 0xf
++#define PCIBAR_IO 0x1
++#define PCIBAR_MEM1M 0x2
++#define PCIBAR_MEM64 0x4
++#define PCIBAR_PREFETCH 0x8
++#define PCIBAR_MEM32_MASK 0xFFFFFF80
++
++/* pci config status reg has a bit to indicate that capability ptr is present */
++
++#define PCI_CAPPTR_PRESENT 0x0010
++
++typedef struct _pci_config_regs {
++ unsigned short vendor;
++ unsigned short device;
++ unsigned short command;
++ unsigned short status;
++ unsigned char rev_id;
++ unsigned char prog_if;
++ unsigned char sub_class;
++ unsigned char base_class;
++ unsigned char cache_line_size;
++ unsigned char latency_timer;
++ unsigned char header_type;
++ unsigned char bist;
++ unsigned long base[PCI_BAR_MAX];
++ unsigned long cardbus_cis;
++ unsigned short subsys_vendor;
++ unsigned short subsys_id;
++ unsigned long baserom;
++ unsigned long rsvd_a[PCR_RSVDA_MAX];
++ unsigned char int_line;
++ unsigned char int_pin;
++ unsigned char min_gnt;
++ unsigned char max_lat;
++ unsigned char dev_dep[192];
++} pci_config_regs;
++
++#define SZPCR (sizeof (pci_config_regs))
++#define MINSZPCR 64 /* offsetof (dev_dep[0] */
++
++/* A structure for the config registers is nice, but in most
++ * systems the config space is not memory mapped, so we need
++ * filed offsetts. :-(
++ */
++#define PCI_CFG_VID 0
++#define PCI_CFG_DID 2
++#define PCI_CFG_CMD 4
++#define PCI_CFG_STAT 6
++#define PCI_CFG_REV 8
++#define PCI_CFG_PROGIF 9
++#define PCI_CFG_SUBCL 0xa
++#define PCI_CFG_BASECL 0xb
++#define PCI_CFG_CLSZ 0xc
++#define PCI_CFG_LATTIM 0xd
++#define PCI_CFG_HDR 0xe
++#define PCI_CFG_BIST 0xf
++#define PCI_CFG_BAR0 0x10
++#define PCI_CFG_BAR1 0x14
++#define PCI_CFG_BAR2 0x18
++#define PCI_CFG_BAR3 0x1c
++#define PCI_CFG_BAR4 0x20
++#define PCI_CFG_BAR5 0x24
++#define PCI_CFG_CIS 0x28
++#define PCI_CFG_SVID 0x2c
++#define PCI_CFG_SSID 0x2e
++#define PCI_CFG_ROMBAR 0x30
++#define PCI_CFG_CAPPTR 0x34
++#define PCI_CFG_INT 0x3c
++#define PCI_CFG_PIN 0x3d
++#define PCI_CFG_MINGNT 0x3e
++#define PCI_CFG_MAXLAT 0x3f
++
++#ifdef __NetBSD__
++#undef PCI_CLASS_DISPLAY
++#undef PCI_CLASS_MEMORY
++#undef PCI_CLASS_BRIDGE
++#undef PCI_CLASS_INPUT
++#undef PCI_CLASS_DOCK
++#endif /* __NetBSD__ */
++
++/* Classes and subclasses */
++
++typedef enum {
++ PCI_CLASS_OLD = 0,
++ PCI_CLASS_DASDI,
++ PCI_CLASS_NET,
++ PCI_CLASS_DISPLAY,
++ PCI_CLASS_MMEDIA,
++ PCI_CLASS_MEMORY,
++ PCI_CLASS_BRIDGE,
++ PCI_CLASS_COMM,
++ PCI_CLASS_BASE,
++ PCI_CLASS_INPUT,
++ PCI_CLASS_DOCK,
++ PCI_CLASS_CPU,
++ PCI_CLASS_SERIAL,
++ PCI_CLASS_INTELLIGENT = 0xe,
++ PCI_CLASS_SATELLITE,
++ PCI_CLASS_CRYPT,
++ PCI_CLASS_DSP,
++ PCI_CLASS_XOR = 0xfe
++} pci_classes;
++
++typedef enum {
++ PCI_DASDI_SCSI,
++ PCI_DASDI_IDE,
++ PCI_DASDI_FLOPPY,
++ PCI_DASDI_IPI,
++ PCI_DASDI_RAID,
++ PCI_DASDI_OTHER = 0x80
++} pci_dasdi_subclasses;
++
++typedef enum {
++ PCI_NET_ETHER,
++ PCI_NET_TOKEN,
++ PCI_NET_FDDI,
++ PCI_NET_ATM,
++ PCI_NET_OTHER = 0x80
++} pci_net_subclasses;
++
++typedef enum {
++ PCI_DISPLAY_VGA,
++ PCI_DISPLAY_XGA,
++ PCI_DISPLAY_3D,
++ PCI_DISPLAY_OTHER = 0x80
++} pci_display_subclasses;
++
++typedef enum {
++ PCI_MMEDIA_VIDEO,
++ PCI_MMEDIA_AUDIO,
++ PCI_MMEDIA_PHONE,
++ PCI_MEDIA_OTHER = 0x80
++} pci_mmedia_subclasses;
++
++typedef enum {
++ PCI_MEMORY_RAM,
++ PCI_MEMORY_FLASH,
++ PCI_MEMORY_OTHER = 0x80
++} pci_memory_subclasses;
++
++typedef enum {
++ PCI_BRIDGE_HOST,
++ PCI_BRIDGE_ISA,
++ PCI_BRIDGE_EISA,
++ PCI_BRIDGE_MC,
++ PCI_BRIDGE_PCI,
++ PCI_BRIDGE_PCMCIA,
++ PCI_BRIDGE_NUBUS,
++ PCI_BRIDGE_CARDBUS,
++ PCI_BRIDGE_RACEWAY,
++ PCI_BRIDGE_OTHER = 0x80
++} pci_bridge_subclasses;
++
++typedef enum {
++ PCI_COMM_UART,
++ PCI_COMM_PARALLEL,
++ PCI_COMM_MULTIUART,
++ PCI_COMM_MODEM,
++ PCI_COMM_OTHER = 0x80
++} pci_comm_subclasses;
++
++typedef enum {
++ PCI_BASE_PIC,
++ PCI_BASE_DMA,
++ PCI_BASE_TIMER,
++ PCI_BASE_RTC,
++ PCI_BASE_PCI_HOTPLUG,
++ PCI_BASE_OTHER = 0x80
++} pci_base_subclasses;
++
++typedef enum {
++ PCI_INPUT_KBD,
++ PCI_INPUT_PEN,
++ PCI_INPUT_MOUSE,
++ PCI_INPUT_SCANNER,
++ PCI_INPUT_GAMEPORT,
++ PCI_INPUT_OTHER = 0x80
++} pci_input_subclasses;
++
++typedef enum {
++ PCI_DOCK_GENERIC,
++ PCI_DOCK_OTHER = 0x80
++} pci_dock_subclasses;
++
++typedef enum {
++ PCI_CPU_386,
++ PCI_CPU_486,
++ PCI_CPU_PENTIUM,
++ PCI_CPU_ALPHA = 0x10,
++ PCI_CPU_POWERPC = 0x20,
++ PCI_CPU_MIPS = 0x30,
++ PCI_CPU_COPROC = 0x40,
++ PCI_CPU_OTHER = 0x80
++} pci_cpu_subclasses;
++
++typedef enum {
++ PCI_SERIAL_IEEE1394,
++ PCI_SERIAL_ACCESS,
++ PCI_SERIAL_SSA,
++ PCI_SERIAL_USB,
++ PCI_SERIAL_FIBER,
++ PCI_SERIAL_SMBUS,
++ PCI_SERIAL_OTHER = 0x80
++} pci_serial_subclasses;
++
++typedef enum {
++ PCI_INTELLIGENT_I2O
++} pci_intelligent_subclasses;
++
++typedef enum {
++ PCI_SATELLITE_TV,
++ PCI_SATELLITE_AUDIO,
++ PCI_SATELLITE_VOICE,
++ PCI_SATELLITE_DATA,
++ PCI_SATELLITE_OTHER = 0x80
++} pci_satellite_subclasses;
++
++typedef enum {
++ PCI_CRYPT_NETWORK,
++ PCI_CRYPT_ENTERTAINMENT,
++ PCI_CRYPT_OTHER = 0x80
++} pci_crypt_subclasses;
++
++typedef enum {
++ PCI_DSP_DPIO,
++ PCI_DSP_OTHER = 0x80
++} pci_dsp_subclasses;
++
++typedef enum {
++ PCI_XOR_QDMA,
++ PCI_XOR_OTHER = 0x80
++} pci_xor_subclasses;
++
++/* Header types */
++typedef enum {
++ PCI_HEADER_NORMAL,
++ PCI_HEADER_BRIDGE,
++ PCI_HEADER_CARDBUS
++} pci_header_types;
++
++
++/* Overlay for a PCI-to-PCI bridge */
++
++#define PPB_RSVDA_MAX 2
++#define PPB_RSVDD_MAX 8
++
++typedef struct _ppb_config_regs {
++ unsigned short vendor;
++ unsigned short device;
++ unsigned short command;
++ unsigned short status;
++ unsigned char rev_id;
++ unsigned char prog_if;
++ unsigned char sub_class;
++ unsigned char base_class;
++ unsigned char cache_line_size;
++ unsigned char latency_timer;
++ unsigned char header_type;
++ unsigned char bist;
++ unsigned long rsvd_a[PPB_RSVDA_MAX];
++ unsigned char prim_bus;
++ unsigned char sec_bus;
++ unsigned char sub_bus;
++ unsigned char sec_lat;
++ unsigned char io_base;
++ unsigned char io_lim;
++ unsigned short sec_status;
++ unsigned short mem_base;
++ unsigned short mem_lim;
++ unsigned short pf_mem_base;
++ unsigned short pf_mem_lim;
++ unsigned long pf_mem_base_hi;
++ unsigned long pf_mem_lim_hi;
++ unsigned short io_base_hi;
++ unsigned short io_lim_hi;
++ unsigned short subsys_vendor;
++ unsigned short subsys_id;
++ unsigned long rsvd_b;
++ unsigned char rsvd_c;
++ unsigned char int_pin;
++ unsigned short bridge_ctrl;
++ unsigned char chip_ctrl;
++ unsigned char diag_ctrl;
++ unsigned short arb_ctrl;
++ unsigned long rsvd_d[PPB_RSVDD_MAX];
++ unsigned char dev_dep[192];
++} ppb_config_regs;
++
++
++/* PCI CAPABILITY DEFINES */
++#define PCI_CAP_POWERMGMTCAP_ID 0x01
++#define PCI_CAP_MSICAP_ID 0x05
++#define PCI_CAP_PCIECAP_ID 0x10
++
++/* Data structure to define the Message Signalled Interrupt facility
++ * Valid for PCI and PCIE configurations
++ */
++typedef struct _pciconfig_cap_msi {
++ unsigned char capID;
++ unsigned char nextptr;
++ unsigned short msgctrl;
++ unsigned int msgaddr;
++} pciconfig_cap_msi;
++
++/* Data structure to define the Power managment facility
++ * Valid for PCI and PCIE configurations
++ */
++typedef struct _pciconfig_cap_pwrmgmt {
++ unsigned char capID;
++ unsigned char nextptr;
++ unsigned short pme_cap;
++ unsigned short pme_sts_ctrl;
++ unsigned char pme_bridge_ext;
++ unsigned char data;
++} pciconfig_cap_pwrmgmt;
++
++/* Data structure to define the PCIE capability */
++typedef struct _pciconfig_cap_pcie {
++ unsigned char capID;
++ unsigned char nextptr;
++ unsigned short pcie_cap;
++ unsigned int dev_cap;
++ unsigned short dev_ctrl;
++ unsigned short dev_status;
++ unsigned int link_cap;
++ unsigned short link_ctrl;
++ unsigned short link_status;
++} pciconfig_cap_pcie;
++
++/* PCIE Enhanced CAPABILITY DEFINES */
++#define PCIE_EXTCFG_OFFSET 0x100
++#define PCIE_ADVERRREP_CAPID 0x0001
++#define PCIE_VC_CAPID 0x0002
++#define PCIE_DEVSNUM_CAPID 0x0003
++#define PCIE_PWRBUDGET_CAPID 0x0004
++
++/* Header to define the PCIE specific capabilities in the extended config space */
++typedef struct _pcie_enhanced_caphdr {
++ unsigned short capID;
++ unsigned short cap_ver : 4;
++ unsigned short next_ptr : 12;
++} pcie_enhanced_caphdr;
++
++
++/* Everything below is BRCM HND proprietary */
++
++
++/* Brcm PCI configuration registers */
++#define cap_list rsvd_a[0]
++#define bar0_window dev_dep[0x80 - 0x40]
++#define bar1_window dev_dep[0x84 - 0x40]
++#define sprom_control dev_dep[0x88 - 0x40]
++
++#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */
++#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */
++#define PCI_SPROM_CONTROL 0x88 /* sprom property control */
++#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */
++#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */
++#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */
++#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */
++#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */
++#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address */
++#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */
++#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */
++#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */
++
++#define PCI_BAR0_SHADOW_OFFSET (2 * 1024) /* bar0 + 2K accesses sprom shadow (in pci core) */
++#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */
++#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */
++#define PCI_BAR0_PCISBR_OFFSET (4 * 1024) /* pci core SB registers are at the end of the
++ * 8KB window, so their address is the "regular"
++ * address plus 4K
++ */
++#define PCI_BAR0_WINSZ 8192 /* bar0 window size */
++
++/* On pci corerev >= 13 and all pcie, the bar0 is now 16KB and it maps: */
++#define PCI_16KB0_PCIREGS_OFFSET (8 * 1024) /* bar0 + 8K accesses pci/pcie core registers */
++#define PCI_16KB0_CCREGS_OFFSET (12 * 1024) /* bar0 + 12K accesses chipc core registers */
++#define PCI_16KBB0_WINSZ (16 * 1024) /* bar0 window size */
++
++/* PCI_INT_STATUS */
++#define PCI_SBIM_STATUS_SERR 0x4 /* backplane SBErr interrupt status */
++
++/* PCI_INT_MASK */
++#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */
++#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */
++#define PCI_SBIM_MASK_SERR 0x4 /* backplane SBErr interrupt mask */
++
++/* PCI_SPROM_CONTROL */
++#define SPROM_SZ_MSK 0x02 /* SPROM Size Mask */
++#define SPROM_LOCKED 0x08 /* SPROM Locked */
++#define SPROM_BLANK 0x04 /* indicating a blank SPROM */
++#define SPROM_WRITEEN 0x10 /* SPROM write enable */
++#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */
++#define SPROM_OTPIN_USE 0x80 /* device OTP In use */
++
++#define SPROM_SIZE 256 /* sprom size in 16-bit */
++#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */
++
++/* PCI_CFG_CMD_STAT */
++#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */
++
++#endif /* _h_pcicfg_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/sbchipc.h linux.dev/arch/mips/bcm947xx/include/sbchipc.h
+--- linux.old/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbchipc.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,516 @@
++/*
++ * SiliconBackplane Chipcommon core hardware definitions.
++ *
++ * The chipcommon core provides chip identification, SB control,
++ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
++ * gpio interface, extbus, and support for serial and parallel flashes.
++ *
++ * $Id: sbchipc.h,v 1.1.1.14 2006/04/15 01:29:08 michael Exp $
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ */
++
++#ifndef _SBCHIPC_H
++#define _SBCHIPC_H
++
++
++#ifndef _LANGUAGE_ASSEMBLY
++
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define _PADLINE(line) pad ## line
++#define _XSTR(line) _PADLINE(line)
++#define PAD _XSTR(__LINE__)
++#endif /* PAD */
++
++typedef volatile struct {
++ uint32 chipid; /* 0x0 */
++ uint32 capabilities;
++ uint32 corecontrol; /* corerev >= 1 */
++ uint32 bist;
++
++ /* OTP */
++ uint32 otpstatus; /* 0x10, corerev >= 10 */
++ uint32 otpcontrol;
++ uint32 otpprog;
++ uint32 PAD;
++
++ /* Interrupt control */
++ uint32 intstatus; /* 0x20 */
++ uint32 intmask;
++ uint32 chipcontrol; /* 0x28, rev >= 11 */
++ uint32 chipstatus; /* 0x2c, rev >= 11 */
++
++ /* Jtag Master */
++ uint32 jtagcmd; /* 0x30, rev >= 10 */
++ uint32 jtagir;
++ uint32 jtagdr;
++ uint32 jtagctrl;
++
++ /* serial flash interface registers */
++ uint32 flashcontrol; /* 0x40 */
++ uint32 flashaddress;
++ uint32 flashdata;
++ uint32 PAD[1];
++
++ /* Silicon backplane configuration broadcast control */
++ uint32 broadcastaddress; /* 0x50 */
++ uint32 broadcastdata;
++ uint32 PAD[2];
++
++ /* gpio - cleared only by power-on-reset */
++ uint32 gpioin; /* 0x60 */
++ uint32 gpioout;
++ uint32 gpioouten;
++ uint32 gpiocontrol;
++ uint32 gpiointpolarity;
++ uint32 gpiointmask;
++ uint32 PAD[2];
++
++ /* Watchdog timer */
++ uint32 watchdog; /* 0x80 */
++ uint32 PAD[1];
++
++ /* GPIO based LED powersave registers corerev >= 16 */
++ uint32 gpiotimerval; /* 0x88 */
++ uint32 gpiotimeroutmask;
++
++ /* clock control */
++ uint32 clockcontrol_n; /* 0x90 */
++ uint32 clockcontrol_sb; /* aka m0 */
++ uint32 clockcontrol_pci; /* aka m1 */
++ uint32 clockcontrol_m2; /* mii/uart/mipsref */
++ uint32 clockcontrol_m3; /* cpu */
++ uint32 clkdiv; /* corerev >= 3 */
++ uint32 PAD[2];
++
++ /* pll delay registers (corerev >= 4) */
++ uint32 pll_on_delay; /* 0xb0 */
++ uint32 fref_sel_delay;
++ uint32 slow_clk_ctl; /* 5 < corerev < 10 */
++ uint32 PAD[1];
++
++ /* Instaclock registers (corerev >= 10) */
++ uint32 system_clk_ctl; /* 0xc0 */
++ uint32 clkstatestretch;
++ uint32 PAD[14];
++
++ /* ExtBus control registers (corerev >= 3) */
++ uint32 pcmcia_config; /* 0x100 */
++ uint32 pcmcia_memwait;
++ uint32 pcmcia_attrwait;
++ uint32 pcmcia_iowait;
++ uint32 ide_config;
++ uint32 ide_memwait;
++ uint32 ide_attrwait;
++ uint32 ide_iowait;
++ uint32 prog_config;
++ uint32 prog_waitcount;
++ uint32 flash_config;
++ uint32 flash_waitcount;
++ uint32 PAD[44];
++
++ /* Clock control and hardware workarounds */
++ uint32 clk_ctl_st;
++ uint32 hw_war;
++ uint32 PAD[70];
++
++ /* uarts */
++ uint8 uart0data; /* 0x300 */
++ uint8 uart0imr;
++ uint8 uart0fcr;
++ uint8 uart0lcr;
++ uint8 uart0mcr;
++ uint8 uart0lsr;
++ uint8 uart0msr;
++ uint8 uart0scratch;
++ uint8 PAD[248]; /* corerev >= 1 */
++
++ uint8 uart1data; /* 0x400 */
++ uint8 uart1imr;
++ uint8 uart1fcr;
++ uint8 uart1lcr;
++ uint8 uart1mcr;
++ uint8 uart1lsr;
++ uint8 uart1msr;
++ uint8 uart1scratch;
++} chipcregs_t;
++
++#endif /* _LANGUAGE_ASSEMBLY */
++
++#define CC_CHIPID 0
++#define CC_CAPABILITIES 4
++#define CC_JTAGCMD 0x30
++#define CC_JTAGIR 0x34
++#define CC_JTAGDR 0x38
++#define CC_JTAGCTRL 0x3c
++#define CC_WATCHDOG 0x80
++#define CC_CLKC_N 0x90
++#define CC_CLKC_M0 0x94
++#define CC_CLKC_M1 0x98
++#define CC_CLKC_M2 0x9c
++#define CC_CLKC_M3 0xa0
++#define CC_CLKDIV 0xa4
++#define CC_SYS_CLK_CTL 0xc0
++#define CC_OTP 0x800
++
++/* chipid */
++#define CID_ID_MASK 0x0000ffff /* Chip Id mask */
++#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */
++#define CID_REV_SHIFT 16 /* Chip Revision shift */
++#define CID_PKG_MASK 0x00f00000 /* Package Option mask */
++#define CID_PKG_SHIFT 20 /* Package Option shift */
++#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */
++#define CID_CC_SHIFT 24
++
++/* capabilities */
++#define CAP_UARTS_MASK 0x00000003 /* Number of uarts */
++#define CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */
++#define CAP_UCLKSEL 0x00000018 /* UARTs clock select */
++#define CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */
++#define CAP_UARTGPIO 0x00000020 /* UARTs own Gpio's 15:12 */
++#define CAP_EXTBUS_MASK 0x000000c0 /* External bus mask */
++#define CAP_EXTBUS_NONE 0x00000000 /* No ExtBus present */
++#define CAP_EXTBUS_FULL 0x00000040 /* ExtBus: PCMCIA, IDE & Prog */
++#define CAP_EXTBUS_PROG 0x00000080 /* ExtBus: ProgIf only */
++#define CAP_FLASH_MASK 0x00000700 /* Type of flash */
++#define CAP_PLL_MASK 0x00038000 /* Type of PLL */
++#define CAP_PWR_CTL 0x00040000 /* Power control */
++#define CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */
++#define CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */
++#define CAP_OTPSIZE_BASE 5 /* OTP Size base */
++#define CAP_JTAGP 0x00400000 /* JTAG Master Present */
++#define CAP_ROM 0x00800000 /* Internal boot rom active */
++#define CAP_BKPLN64 0x08000000 /* 64-bit backplane */
++
++/* PLL type */
++#define PLL_NONE 0x00000000
++#define PLL_TYPE1 0x00010000 /* 48Mhz base, 3 dividers */
++#define PLL_TYPE2 0x00020000 /* 48Mhz, 4 dividers */
++#define PLL_TYPE3 0x00030000 /* 25Mhz, 2 dividers */
++#define PLL_TYPE4 0x00008000 /* 48Mhz, 4 dividers */
++#define PLL_TYPE5 0x00018000 /* 25Mhz, 4 dividers */
++#define PLL_TYPE6 0x00028000 /* 100/200 or 120/240 only */
++#define PLL_TYPE7 0x00038000 /* 25Mhz, 4 dividers */
++
++/* corecontrol */
++#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */
++#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
++
++/* chipcontrol */
++#define CHIPCTRL_4321A0_DEFAULT 0x3a4
++#define CHIPCTRL_4321A1_DEFAULT 0x0a4
++
++/* Fields in the otpstatus register */
++#define OTPS_PROGFAIL 0x80000000
++#define OTPS_PROTECT 0x00000007
++#define OTPS_HW_PROTECT 0x00000001
++#define OTPS_SW_PROTECT 0x00000002
++#define OTPS_CID_PROTECT 0x00000004
++
++/* Fields in the otpcontrol register */
++#define OTPC_RECWAIT 0xff000000
++#define OTPC_PROGWAIT 0x00ffff00
++#define OTPC_PRW_SHIFT 8
++#define OTPC_MAXFAIL 0x00000038
++#define OTPC_VSEL 0x00000006
++#define OTPC_SELVL 0x00000001
++
++/* Fields in otpprog */
++#define OTPP_COL_MASK 0x000000ff
++#define OTPP_ROW_MASK 0x0000ff00
++#define OTPP_ROW_SHIFT 8
++#define OTPP_READERR 0x10000000
++#define OTPP_VALUE 0x20000000
++#define OTPP_VALUE_SHIFT 29
++#define OTPP_READ 0x40000000
++#define OTPP_START 0x80000000
++#define OTPP_BUSY 0x80000000
++
++/* jtagcmd */
++#define JCMD_START 0x80000000
++#define JCMD_BUSY 0x80000000
++#define JCMD_PAUSE 0x40000000
++#define JCMD0_ACC_MASK 0x0000f000
++#define JCMD0_ACC_IRDR 0x00000000
++#define JCMD0_ACC_DR 0x00001000
++#define JCMD0_ACC_IR 0x00002000
++#define JCMD0_ACC_RESET 0x00003000
++#define JCMD0_ACC_IRPDR 0x00004000
++#define JCMD0_ACC_PDR 0x00005000
++#define JCMD0_IRW_MASK 0x00000f00
++#define JCMD_ACC_MASK 0x000f0000 /* Changes for corerev 11 */
++#define JCMD_ACC_IRDR 0x00000000
++#define JCMD_ACC_DR 0x00010000
++#define JCMD_ACC_IR 0x00020000
++#define JCMD_ACC_RESET 0x00030000
++#define JCMD_ACC_IRPDR 0x00040000
++#define JCMD_ACC_PDR 0x00050000
++#define JCMD_IRW_MASK 0x00001f00
++#define JCMD_IRW_SHIFT 8
++#define JCMD_DRW_MASK 0x0000003f
++
++/* jtagctrl */
++#define JCTRL_FORCE_CLK 4 /* Force clock */
++#define JCTRL_EXT_EN 2 /* Enable external targets */
++#define JCTRL_EN 1 /* Enable Jtag master */
++
++/* Fields in clkdiv */
++#define CLKD_SFLASH 0x0f000000
++#define CLKD_SFLASH_SHIFT 24
++#define CLKD_OTP 0x000f0000
++#define CLKD_OTP_SHIFT 16
++#define CLKD_JTAG 0x00000f00
++#define CLKD_JTAG_SHIFT 8
++#define CLKD_UART 0x000000ff
++
++/* intstatus/intmask */
++#define CI_GPIO 0x00000001 /* gpio intr */
++#define CI_EI 0x00000002 /* ro: ext intr pin (corerev >= 3) */
++#define CI_WDRESET 0x80000000 /* watchdog reset occurred */
++
++/* slow_clk_ctl */
++#define SCC_SS_MASK 0x00000007 /* slow clock source mask */
++#define SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */
++#define SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */
++#define SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */
++#define SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
++#define SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled,
++ * 0: LPO is enabled
++ */
++#define SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock,
++ * 0: power logic control
++ */
++#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors
++ * PLL clock disable requests from core
++ */
++#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't
++ * disable crystal when appropriate
++ */
++#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
++#define SCC_CD_MASK 0xffff0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
++#define SCC_CD_SHIFT 16
++
++/* system_clk_ctl */
++#define SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */
++#define SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */
++#define SYCC_FP 0x00000004 /* ForcePLLOn */
++#define SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */
++#define SYCC_HR 0x00000010 /* Force HT */
++#define SYCC_CD_MASK 0xffff0000 /* ClkDiv (ILP = 1/(4 * (divisor + 1)) */
++#define SYCC_CD_SHIFT 16
++
++/* gpiotimerval */
++#define GPIO_ONTIME_SHIFT 16
++
++/* clockcontrol_n */
++#define CN_N1_MASK 0x3f /* n1 control */
++#define CN_N2_MASK 0x3f00 /* n2 control */
++#define CN_N2_SHIFT 8
++#define CN_PLLC_MASK 0xf0000 /* pll control */
++#define CN_PLLC_SHIFT 16
++
++/* clockcontrol_sb/pci/uart */
++#define CC_M1_MASK 0x3f /* m1 control */
++#define CC_M2_MASK 0x3f00 /* m2 control */
++#define CC_M2_SHIFT 8
++#define CC_M3_MASK 0x3f0000 /* m3 control */
++#define CC_M3_SHIFT 16
++#define CC_MC_MASK 0x1f000000 /* mux control */
++#define CC_MC_SHIFT 24
++
++/* N3M Clock control magic field values */
++#define CC_F6_2 0x02 /* A factor of 2 in */
++#define CC_F6_3 0x03 /* 6-bit fields like */
++#define CC_F6_4 0x05 /* N1, M1 or M3 */
++#define CC_F6_5 0x09
++#define CC_F6_6 0x11
++#define CC_F6_7 0x21
++
++#define CC_F5_BIAS 5 /* 5-bit fields get this added */
++
++#define CC_MC_BYPASS 0x08
++#define CC_MC_M1 0x04
++#define CC_MC_M1M2 0x02
++#define CC_MC_M1M2M3 0x01
++#define CC_MC_M1M3 0x11
++
++/* Type 2 Clock control magic field values */
++#define CC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */
++#define CC_T2M2_BIAS 3 /* m2 bias */
++
++#define CC_T2MC_M1BYP 1
++#define CC_T2MC_M2BYP 2
++#define CC_T2MC_M3BYP 4
++
++/* Type 6 Clock control magic field values */
++#define CC_T6_MMASK 1 /* bits of interest in m */
++#define CC_T6_M0 120000000 /* sb clock for m = 0 */
++#define CC_T6_M1 100000000 /* sb clock for m = 1 */
++#define SB2MIPS_T6(sb) (2 * (sb))
++
++/* Common clock base */
++#define CC_CLOCK_BASE1 24000000 /* Half the clock freq */
++#define CC_CLOCK_BASE2 12500000 /* Alternate crystal on some PLL's */
++
++/* Clock control values for 200Mhz in 5350 */
++#define CLKC_5350_N 0x0311
++#define CLKC_5350_M 0x04020009
++
++/* Flash types in the chipcommon capabilities register */
++#define FLASH_NONE 0x000 /* No flash */
++#define SFLASH_ST 0x100 /* ST serial flash */
++#define SFLASH_AT 0x200 /* Atmel serial flash */
++#define PFLASH 0x700 /* Parallel flash */
++
++/* Bits in the ExtBus config registers */
++#define CC_CFG_EN 0x0001 /* Enable */
++#define CC_CFG_EM_MASK 0x000e /* Extif Mode */
++#define CC_CFG_EM_ASYNC 0x0000 /* Async/Parallel flash */
++#define CC_CFG_EM_SYNC 0x0002 /* Synchronous */
++#define CC_CFG_EM_PCMCIA 0x0004 /* PCMCIA */
++#define CC_CFG_EM_IDE 0x0006 /* IDE */
++#define CC_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */
++#define CC_CFG_CD_MASK 0x0060 /* Sync: Clock divisor */
++#define CC_CFG_CE 0x0080 /* Sync: Clock enable */
++#define CC_CFG_SB 0x0100 /* Sync: Size/Bytestrobe */
++
++/* ExtBus address space */
++#define CC_EB_BASE 0x1a000000 /* Chipc ExtBus base address */
++#define CC_EB_PCMCIA_MEM 0x1a000000 /* PCMCIA 0 memory base address */
++#define CC_EB_PCMCIA_IO 0x1a200000 /* PCMCIA 0 I/O base address */
++#define CC_EB_PCMCIA_CFG 0x1a400000 /* PCMCIA 0 config base address */
++#define CC_EB_IDE 0x1a800000 /* IDE memory base */
++#define CC_EB_PCMCIA1_MEM 0x1a800000 /* PCMCIA 1 memory base address */
++#define CC_EB_PCMCIA1_IO 0x1aa00000 /* PCMCIA 1 I/O base address */
++#define CC_EB_PCMCIA1_CFG 0x1ac00000 /* PCMCIA 1 config base address */
++#define CC_EB_PROGIF 0x1b000000 /* ProgIF Async/Sync base address */
++
++
++/* Start/busy bit in flashcontrol */
++#define SFLASH_OPCODE 0x000000ff
++#define SFLASH_ACTION 0x00000700
++#define SFLASH_START 0x80000000
++#define SFLASH_BUSY SFLASH_START
++
++/* flashcontrol action codes */
++#define SFLASH_ACT_OPONLY 0x0000 /* Issue opcode only */
++#define SFLASH_ACT_OP1D 0x0100 /* opcode + 1 data byte */
++#define SFLASH_ACT_OP3A 0x0200 /* opcode + 3 address bytes */
++#define SFLASH_ACT_OP3A1D 0x0300 /* opcode + 3 addres & 1 data bytes */
++#define SFLASH_ACT_OP3A4D 0x0400 /* opcode + 3 addres & 4 data bytes */
++#define SFLASH_ACT_OP3A4X4D 0x0500 /* opcode + 3 addres, 4 don't care & 4 data bytes */
++#define SFLASH_ACT_OP3A1X4D 0x0700 /* opcode + 3 addres, 1 don't care & 4 data bytes */
++
++/* flashcontrol action+opcodes for ST flashes */
++#define SFLASH_ST_WREN 0x0006 /* Write Enable */
++#define SFLASH_ST_WRDIS 0x0004 /* Write Disable */
++#define SFLASH_ST_RDSR 0x0105 /* Read Status Register */
++#define SFLASH_ST_WRSR 0x0101 /* Write Status Register */
++#define SFLASH_ST_READ 0x0303 /* Read Data Bytes */
++#define SFLASH_ST_PP 0x0302 /* Page Program */
++#define SFLASH_ST_SE 0x02d8 /* Sector Erase */
++#define SFLASH_ST_BE 0x00c7 /* Bulk Erase */
++#define SFLASH_ST_DP 0x00b9 /* Deep Power-down */
++#define SFLASH_ST_RES 0x03ab /* Read Electronic Signature */
++
++/* Status register bits for ST flashes */
++#define SFLASH_ST_WIP 0x01 /* Write In Progress */
++#define SFLASH_ST_WEL 0x02 /* Write Enable Latch */
++#define SFLASH_ST_BP_MASK 0x1c /* Block Protect */
++#define SFLASH_ST_BP_SHIFT 2
++#define SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */
++
++/* flashcontrol action+opcodes for Atmel flashes */
++#define SFLASH_AT_READ 0x07e8
++#define SFLASH_AT_PAGE_READ 0x07d2
++#define SFLASH_AT_BUF1_READ
++#define SFLASH_AT_BUF2_READ
++#define SFLASH_AT_STATUS 0x01d7
++#define SFLASH_AT_BUF1_WRITE 0x0384
++#define SFLASH_AT_BUF2_WRITE 0x0387
++#define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283
++#define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286
++#define SFLASH_AT_BUF1_PROGRAM 0x0288
++#define SFLASH_AT_BUF2_PROGRAM 0x0289
++#define SFLASH_AT_PAGE_ERASE 0x0281
++#define SFLASH_AT_BLOCK_ERASE 0x0250
++#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
++#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
++#define SFLASH_AT_BUF1_LOAD 0x0253
++#define SFLASH_AT_BUF2_LOAD 0x0255
++#define SFLASH_AT_BUF1_COMPARE 0x0260
++#define SFLASH_AT_BUF2_COMPARE 0x0261
++#define SFLASH_AT_BUF1_REPROGRAM 0x0258
++#define SFLASH_AT_BUF2_REPROGRAM 0x0259
++
++/* Status register bits for Atmel flashes */
++#define SFLASH_AT_READY 0x80
++#define SFLASH_AT_MISMATCH 0x40
++#define SFLASH_AT_ID_MASK 0x38
++#define SFLASH_AT_ID_SHIFT 3
++
++/* OTP regions */
++#define OTP_HW_REGION OTPS_HW_PROTECT
++#define OTP_SW_REGION OTPS_SW_PROTECT
++#define OTP_CID_REGION OTPS_CID_PROTECT
++
++/* OTP regions (Byte offsets from otp size) */
++#define OTP_SWLIM_OFF (-8)
++#define OTP_CIDBASE_OFF 0
++#define OTP_CIDLIM_OFF 8
++
++/* Predefined OTP words (Word offset from otp size) */
++#define OTP_BOUNDARY_OFF (-4)
++#define OTP_HWSIGN_OFF (-3)
++#define OTP_SWSIGN_OFF (-2)
++#define OTP_CIDSIGN_OFF (-1)
++
++#define OTP_CID_OFF 0
++#define OTP_PKG_OFF 1
++#define OTP_FID_OFF 2
++#define OTP_RSV_OFF 3
++#define OTP_LIM_OFF 4
++
++#define OTP_SIGNATURE 0x578a
++#define OTP_MAGIC 0x4e56
++
++/*
++ * These are the UART port assignments, expressed as offsets from the base
++ * register. These assignments should hold for any serial port based on
++ * a 8250, 16450, or 16550(A).
++ */
++
++#define UART_RX 0 /* In: Receive buffer (DLAB=0) */
++#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */
++#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
++#define UART_IER 1 /* In/Out: Interrupt Enable Register (DLAB=0) */
++#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */
++#define UART_IIR 2 /* In: Interrupt Identity Register */
++#define UART_FCR 2 /* Out: FIFO Control Register */
++#define UART_LCR 3 /* Out: Line Control Register */
++#define UART_MCR 4 /* Out: Modem Control Register */
++#define UART_LSR 5 /* In: Line Status Register */
++#define UART_MSR 6 /* In: Modem Status Register */
++#define UART_SCR 7 /* I/O: Scratch Register */
++#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
++#define UART_MCR_OUT2 0x08 /* MCR GPIO out 2 */
++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
++#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
++#define UART_LSR_RXRDY 0x01 /* Receiver ready */
++#define UART_FCR_FIFO_ENABLE 1 /* FIFO control register bit controlling FIFO enable/disable */
++
++/* Interrupt Enable Register (IER) bits */
++#define UART_IER_EDSSI 8 /* enable modem status interrupt */
++#define UART_IER_ELSI 4 /* enable receiver line status interrupt */
++#define UART_IER_ETBEI 2 /* enable transmitter holding register empty interrupt */
++#define UART_IER_ERBFI 1 /* enable data available interrupt */
++
++#endif /* _SBCHIPC_H */
+diff -urN linux.old/arch/mips/bcm947xx/include/sbconfig.h linux.dev/arch/mips/bcm947xx/include/sbconfig.h
+--- linux.old/arch/mips/bcm947xx/include/sbconfig.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbconfig.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,369 @@
++/*
++ * Broadcom SiliconBackplane hardware register definitions.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbconfig.h,v 1.1.1.11 2006/02/27 03:43:16 honor Exp $
++ */
++
++#ifndef _SBCONFIG_H
++#define _SBCONFIG_H
++
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define _PADLINE(line) pad ## line
++#define _XSTR(line) _PADLINE(line)
++#define PAD _XSTR(__LINE__)
++#endif
++
++/*
++ * SiliconBackplane Address Map.
++ * All regions may not exist on all chips.
++ */
++#define SB_SDRAM_BASE 0x00000000 /* Physical SDRAM */
++#define SB_PCI_MEM 0x08000000 /* Host Mode sb2pcitranslation0 (64 MB) */
++#define SB_PCI_MEM_SZ (64 * 1024 * 1024)
++#define SB_PCI_CFG 0x0c000000 /* Host Mode sb2pcitranslation1 (64 MB) */
++#define SB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */
++#define SB_ENUM_BASE 0x18000000 /* Enumeration space base */
++#define SB_ENUM_LIM 0x18010000 /* Enumeration space limit */
++
++#define SB_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */
++#define SB_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */
++
++#define SB_EXTIF_BASE 0x1f000000 /* External Interface region base address */
++#define SB_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */
++#define SB_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */
++
++#define SB_ROM 0x20000000 /* ARM ROM */
++#define SB_SRAM2 0x80000000 /* ARM SRAM Region 2 */
++#define SB_ARM_FLASH1 0xffff0000 /* ARM Flash Region 1 */
++#define SB_ARM_FLASH1_SZ 0x00010000 /* ARM Size of Flash Region 1 */
++
++#define SB_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */
++#define SB_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */
++#define SB_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2
++ * (2 ZettaBytes), low 32 bits
++ */
++#define SB_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2
++ * (2 ZettaBytes), high 32 bits
++ */
++#define SB_EUART (SB_EXTIF_BASE + 0x00800000)
++#define SB_LED (SB_EXTIF_BASE + 0x00900000)
++
++
++/* enumeration space related defs */
++#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */
++#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE)
++#define SB_MAXFUNCS 4 /* max. # functions per core */
++#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */
++#define SBCONFIGSIZE 256 /* sizeof (sbconfig_t) */
++
++/* mips address */
++#define SB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */
++
++/*
++ * Sonics Configuration Space Registers.
++ */
++#define SBIPSFLAG 0x08
++#define SBTPSFLAG 0x18
++#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */
++#define SBTMERRLOG 0x50 /* sonics >= 2.3 */
++#define SBADMATCH3 0x60
++#define SBADMATCH2 0x68
++#define SBADMATCH1 0x70
++#define SBIMSTATE 0x90
++#define SBINTVEC 0x94
++#define SBTMSTATELOW 0x98
++#define SBTMSTATEHIGH 0x9c
++#define SBBWA0 0xa0
++#define SBIMCONFIGLOW 0xa8
++#define SBIMCONFIGHIGH 0xac
++#define SBADMATCH0 0xb0
++#define SBTMCONFIGLOW 0xb8
++#define SBTMCONFIGHIGH 0xbc
++#define SBBCONFIG 0xc0
++#define SBBSTATE 0xc8
++#define SBACTCNFG 0xd8
++#define SBFLAGST 0xe8
++#define SBIDLOW 0xf8
++#define SBIDHIGH 0xfc
++
++/* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have
++ * a few registers *below* that line. I think it would be very confusing to try
++ * and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here,
++ */
++
++#define SBIMERRLOGA 0xea8
++#define SBIMERRLOG 0xeb0
++#define SBTMPORTCONNID0 0xed8
++#define SBTMPORTLOCK0 0xef8
++
++#ifndef _LANGUAGE_ASSEMBLY
++
++typedef volatile struct _sbconfig {
++ uint32 PAD[2];
++ uint32 sbipsflag; /* initiator port ocp slave flag */
++ uint32 PAD[3];
++ uint32 sbtpsflag; /* target port ocp slave flag */
++ uint32 PAD[11];
++ uint32 sbtmerrloga; /* (sonics >= 2.3) */
++ uint32 PAD;
++ uint32 sbtmerrlog; /* (sonics >= 2.3) */
++ uint32 PAD[3];
++ uint32 sbadmatch3; /* address match3 */
++ uint32 PAD;
++ uint32 sbadmatch2; /* address match2 */
++ uint32 PAD;
++ uint32 sbadmatch1; /* address match1 */
++ uint32 PAD[7];
++ uint32 sbimstate; /* initiator agent state */
++ uint32 sbintvec; /* interrupt mask */
++ uint32 sbtmstatelow; /* target state */
++ uint32 sbtmstatehigh; /* target state */
++ uint32 sbbwa0; /* bandwidth allocation table0 */
++ uint32 PAD;
++ uint32 sbimconfiglow; /* initiator configuration */
++ uint32 sbimconfighigh; /* initiator configuration */
++ uint32 sbadmatch0; /* address match0 */
++ uint32 PAD;
++ uint32 sbtmconfiglow; /* target configuration */
++ uint32 sbtmconfighigh; /* target configuration */
++ uint32 sbbconfig; /* broadcast configuration */
++ uint32 PAD;
++ uint32 sbbstate; /* broadcast state */
++ uint32 PAD[3];
++ uint32 sbactcnfg; /* activate configuration */
++ uint32 PAD[3];
++ uint32 sbflagst; /* current sbflags */
++ uint32 PAD[3];
++ uint32 sbidlow; /* identification */
++ uint32 sbidhigh; /* identification */
++} sbconfig_t;
++
++#endif /* _LANGUAGE_ASSEMBLY */
++
++/* sbipsflag */
++#define SBIPS_INT1_MASK 0x3f /* which sbflags get routed to mips interrupt 1 */
++#define SBIPS_INT1_SHIFT 0
++#define SBIPS_INT2_MASK 0x3f00 /* which sbflags get routed to mips interrupt 2 */
++#define SBIPS_INT2_SHIFT 8
++#define SBIPS_INT3_MASK 0x3f0000 /* which sbflags get routed to mips interrupt 3 */
++#define SBIPS_INT3_SHIFT 16
++#define SBIPS_INT4_MASK 0x3f000000 /* which sbflags get routed to mips interrupt 4 */
++#define SBIPS_INT4_SHIFT 24
++
++/* sbtpsflag */
++#define SBTPS_NUM0_MASK 0x3f /* interrupt sbFlag # generated by this core */
++#define SBTPS_F0EN0 0x40 /* interrupt is always sent on the backplane */
++
++/* sbtmerrlog */
++#define SBTMEL_CM 0x00000007 /* command */
++#define SBTMEL_CI 0x0000ff00 /* connection id */
++#define SBTMEL_EC 0x0f000000 /* error code */
++#define SBTMEL_ME 0x80000000 /* multiple error */
++
++/* sbimstate */
++#define SBIM_PC 0xf /* pipecount */
++#define SBIM_AP_MASK 0x30 /* arbitration policy */
++#define SBIM_AP_BOTH 0x00 /* use both timeslaces and token */
++#define SBIM_AP_TS 0x10 /* use timesliaces only */
++#define SBIM_AP_TK 0x20 /* use token only */
++#define SBIM_AP_RSV 0x30 /* reserved */
++#define SBIM_IBE 0x20000 /* inbanderror */
++#define SBIM_TO 0x40000 /* timeout */
++#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */
++#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */
++
++/* sbtmstatelow */
++#define SBTML_RESET 0x1 /* reset */
++#define SBTML_REJ_MASK 0x6 /* reject */
++#define SBTML_REJ_SHIFT 1
++#define SBTML_CLK 0x10000 /* clock enable */
++#define SBTML_FGC 0x20000 /* force gated clocks on */
++#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */
++#define SBTML_PE 0x40000000 /* pme enable */
++#define SBTML_BE 0x80000000 /* bist enable */
++
++/* sbtmstatehigh */
++#define SBTMH_SERR 0x1 /* serror */
++#define SBTMH_INT 0x2 /* interrupt */
++#define SBTMH_BUSY 0x4 /* busy */
++#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */
++#define SBTMH_FL_MASK 0x1fff0000 /* core-specific flags */
++#define SBTMH_DMA64 0x10000000 /* supports DMA with 64-bit addresses */
++#define SBTMH_GCR 0x20000000 /* gated clock request */
++#define SBTMH_BISTF 0x40000000 /* bist failed */
++#define SBTMH_BISTD 0x80000000 /* bist done */
++
++
++/* sbbwa0 */
++#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */
++#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */
++#define SBBWA_TAB1_SHIFT 16
++
++/* sbimconfiglow */
++#define SBIMCL_STO_MASK 0x7 /* service timeout */
++#define SBIMCL_RTO_MASK 0x70 /* request timeout */
++#define SBIMCL_RTO_SHIFT 4
++#define SBIMCL_CID_MASK 0xff0000 /* connection id */
++#define SBIMCL_CID_SHIFT 16
++
++/* sbimconfighigh */
++#define SBIMCH_IEM_MASK 0xc /* inband error mode */
++#define SBIMCH_TEM_MASK 0x30 /* timeout error mode */
++#define SBIMCH_TEM_SHIFT 4
++#define SBIMCH_BEM_MASK 0xc0 /* bus error mode */
++#define SBIMCH_BEM_SHIFT 6
++
++/* sbadmatch0 */
++#define SBAM_TYPE_MASK 0x3 /* address type */
++#define SBAM_AD64 0x4 /* reserved */
++#define SBAM_ADINT0_MASK 0xf8 /* type0 size */
++#define SBAM_ADINT0_SHIFT 3
++#define SBAM_ADINT1_MASK 0x1f8 /* type1 size */
++#define SBAM_ADINT1_SHIFT 3
++#define SBAM_ADINT2_MASK 0x1f8 /* type2 size */
++#define SBAM_ADINT2_SHIFT 3
++#define SBAM_ADEN 0x400 /* enable */
++#define SBAM_ADNEG 0x800 /* negative decode */
++#define SBAM_BASE0_MASK 0xffffff00 /* type0 base address */
++#define SBAM_BASE0_SHIFT 8
++#define SBAM_BASE1_MASK 0xfffff000 /* type1 base address for the core */
++#define SBAM_BASE1_SHIFT 12
++#define SBAM_BASE2_MASK 0xffff0000 /* type2 base address for the core */
++#define SBAM_BASE2_SHIFT 16
++
++/* sbtmconfiglow */
++#define SBTMCL_CD_MASK 0xff /* clock divide */
++#define SBTMCL_CO_MASK 0xf800 /* clock offset */
++#define SBTMCL_CO_SHIFT 11
++#define SBTMCL_IF_MASK 0xfc0000 /* interrupt flags */
++#define SBTMCL_IF_SHIFT 18
++#define SBTMCL_IM_MASK 0x3000000 /* interrupt mode */
++#define SBTMCL_IM_SHIFT 24
++
++/* sbtmconfighigh */
++#define SBTMCH_BM_MASK 0x3 /* busy mode */
++#define SBTMCH_RM_MASK 0x3 /* retry mode */
++#define SBTMCH_RM_SHIFT 2
++#define SBTMCH_SM_MASK 0x30 /* stop mode */
++#define SBTMCH_SM_SHIFT 4
++#define SBTMCH_EM_MASK 0x300 /* sb error mode */
++#define SBTMCH_EM_SHIFT 8
++#define SBTMCH_IM_MASK 0xc00 /* int mode */
++#define SBTMCH_IM_SHIFT 10
++
++/* sbbconfig */
++#define SBBC_LAT_MASK 0x3 /* sb latency */
++#define SBBC_MAX0_MASK 0xf0000 /* maxccntr0 */
++#define SBBC_MAX0_SHIFT 16
++#define SBBC_MAX1_MASK 0xf00000 /* maxccntr1 */
++#define SBBC_MAX1_SHIFT 20
++
++/* sbbstate */
++#define SBBS_SRD 0x1 /* st reg disable */
++#define SBBS_HRD 0x2 /* hold reg disable */
++
++/* sbidlow */
++#define SBIDL_CS_MASK 0x3 /* config space */
++#define SBIDL_AR_MASK 0x38 /* # address ranges supported */
++#define SBIDL_AR_SHIFT 3
++#define SBIDL_SYNCH 0x40 /* sync */
++#define SBIDL_INIT 0x80 /* initiator */
++#define SBIDL_MINLAT_MASK 0xf00 /* minimum backplane latency */
++#define SBIDL_MINLAT_SHIFT 8
++#define SBIDL_MAXLAT 0xf000 /* maximum backplane latency */
++#define SBIDL_MAXLAT_SHIFT 12
++#define SBIDL_FIRST 0x10000 /* this initiator is first */
++#define SBIDL_CW_MASK 0xc0000 /* cycle counter width */
++#define SBIDL_CW_SHIFT 18
++#define SBIDL_TP_MASK 0xf00000 /* target ports */
++#define SBIDL_TP_SHIFT 20
++#define SBIDL_IP_MASK 0xf000000 /* initiator ports */
++#define SBIDL_IP_SHIFT 24
++#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */
++#define SBIDL_RV_SHIFT 28
++#define SBIDL_RV_2_2 0x00000000 /* version 2.2 or earlier */
++#define SBIDL_RV_2_3 0x10000000 /* version 2.3 */
++
++/* sbidhigh */
++#define SBIDH_RC_MASK 0x000f /* revision code */
++#define SBIDH_RCE_MASK 0x7000 /* revision code extension field */
++#define SBIDH_RCE_SHIFT 8
++#define SBCOREREV(sbidh) \
++ ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK))
++#define SBIDH_CC_MASK 0x8ff0 /* core code */
++#define SBIDH_CC_SHIFT 4
++#define SBIDH_VC_MASK 0xffff0000 /* vendor code */
++#define SBIDH_VC_SHIFT 16
++
++#define SB_COMMIT 0xfd8 /* update buffered registers value */
++
++/* vendor codes */
++#define SB_VEND_BCM 0x4243 /* Broadcom's SB vendor code */
++
++/* core codes */
++#define SB_NODEV 0x700 /* Invalid coreid */
++#define SB_CC 0x800 /* chipcommon core */
++#define SB_ILINE20 0x801 /* iline20 core */
++#define SB_SDRAM 0x803 /* sdram core */
++#define SB_PCI 0x804 /* pci core */
++#define SB_MIPS 0x805 /* mips core */
++#define SB_ENET 0x806 /* enet mac core */
++#define SB_CODEC 0x807 /* v90 codec core */
++#define SB_USB 0x808 /* usb 1.1 host/device core */
++#define SB_ADSL 0x809 /* ADSL core */
++#define SB_ILINE100 0x80a /* iline100 core */
++#define SB_IPSEC 0x80b /* ipsec core */
++#define SB_PCMCIA 0x80d /* pcmcia core */
++#define SB_SDIOD SB_PCMCIA /* pcmcia core has sdio device */
++#define SB_SOCRAM 0x80e /* internal memory core */
++#define SB_MEMC 0x80f /* memc sdram core */
++#define SB_EXTIF 0x811 /* external interface core */
++#define SB_D11 0x812 /* 802.11 MAC core */
++#define SB_MIPS33 0x816 /* mips3302 core */
++#define SB_USB11H 0x817 /* usb 1.1 host core */
++#define SB_USB11D 0x818 /* usb 1.1 device core */
++#define SB_USB20H 0x819 /* usb 2.0 host core */
++#define SB_USB20D 0x81a /* usb 2.0 device core */
++#define SB_SDIOH 0x81b /* sdio host core */
++#define SB_ROBO 0x81c /* roboswitch core */
++#define SB_ATA100 0x81d /* parallel ATA core */
++#define SB_SATAXOR 0x81e /* serial ATA & XOR DMA core */
++#define SB_GIGETH 0x81f /* gigabit ethernet core */
++#define SB_PCIE 0x820 /* pci express core */
++#define SB_MIMO 0x821 /* MIMO phy core */
++#define SB_SRAMC 0x822 /* SRAM controller core */
++#define SB_MINIMAC 0x823 /* MINI MAC/phy core */
++#define SB_ARM11 0x824 /* ARM 1176 core */
++#define SB_ARM7 0x825 /* ARM 7tdmi core */
++
++#define SB_CC_IDX 0 /* chipc, when present, is always core 0 */
++
++/* Not really related to Silicon Backplane, but a couple of software
++ * conventions for the use the flash space:
++ */
++
++/* Minumum amount of flash we support */
++#define FLASH_MIN 0x00020000 /* Minimum flash size */
++
++/* A boot/binary may have an embedded block that describes its size */
++#define BISZ_OFFSET 0x3e0 /* At this offset into the binary */
++#define BISZ_MAGIC 0x4249535a /* Marked with this value: 'BISZ' */
++#define BISZ_MAGIC_IDX 0 /* Word 0: magic */
++#define BISZ_TXTST_IDX 1 /* 1: text start */
++#define BISZ_TXTEND_IDX 2 /* 2: text start */
++#define BISZ_DATAST_IDX 3 /* 3: text start */
++#define BISZ_DATAEND_IDX 4 /* 4: text start */
++#define BISZ_BSSST_IDX 5 /* 5: text start */
++#define BISZ_BSSEND_IDX 6 /* 6: text start */
++#define BISZ_SIZE 7 /* descriptor size in 32-bit intergers */
++
++#endif /* _SBCONFIG_H */
+diff -urN linux.old/arch/mips/bcm947xx/include/sbextif.h linux.dev/arch/mips/bcm947xx/include/sbextif.h
+--- linux.old/arch/mips/bcm947xx/include/sbextif.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbextif.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,243 @@
++/*
++ * Hardware-specific External Interface I/O core definitions
++ * for the BCM47xx family of SiliconBackplane-based chips.
++ *
++ * The External Interface core supports a total of three external chip selects
++ * supporting external interfaces. One of the external chip selects is
++ * used for Flash, one is used for PCMCIA, and the other may be
++ * programmed to support either a synchronous interface or an
++ * asynchronous interface. The asynchronous interface can be used to
++ * support external devices such as UARTs and the BCM2019 Bluetooth
++ * baseband processor.
++ * The external interface core also contains 2 on-chip 16550 UARTs, clock
++ * frequency control, a watchdog interrupt timer, and a GPIO interface.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbextif.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $
++ */
++
++#ifndef _SBEXTIF_H
++#define _SBEXTIF_H
++
++/* external interface address space */
++#define EXTIF_PCMCIA_MEMBASE(x) (x)
++#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000)
++#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000)
++#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000)
++#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000)
++
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define _PADLINE(line) pad ## line
++#define _XSTR(line) _PADLINE(line)
++#define PAD _XSTR(__LINE__)
++#endif /* PAD */
++
++/*
++ * The multiple instances of output and output enable registers
++ * are present to allow driver software for multiple cores to control
++ * gpio outputs without needing to share a single register pair.
++ */
++struct gpiouser {
++ uint32 out;
++ uint32 outen;
++};
++#define NGPIOUSER 5
++
++typedef volatile struct {
++ uint32 corecontrol;
++ uint32 extstatus;
++ uint32 PAD[2];
++
++ /* pcmcia control registers */
++ uint32 pcmcia_config;
++ uint32 pcmcia_memwait;
++ uint32 pcmcia_attrwait;
++ uint32 pcmcia_iowait;
++
++ /* programmable interface control registers */
++ uint32 prog_config;
++ uint32 prog_waitcount;
++
++ /* flash control registers */
++ uint32 flash_config;
++ uint32 flash_waitcount;
++ uint32 PAD[4];
++
++ uint32 watchdog;
++
++ /* clock control */
++ uint32 clockcontrol_n;
++ uint32 clockcontrol_sb;
++ uint32 clockcontrol_pci;
++ uint32 clockcontrol_mii;
++ uint32 PAD[3];
++
++ /* gpio */
++ uint32 gpioin;
++ struct gpiouser gpio[NGPIOUSER];
++ uint32 PAD;
++ uint32 ejtagouten;
++ uint32 gpiointpolarity;
++ uint32 gpiointmask;
++ uint32 PAD[153];
++
++ uint8 uartdata;
++ uint8 PAD[3];
++ uint8 uartimer;
++ uint8 PAD[3];
++ uint8 uartfcr;
++ uint8 PAD[3];
++ uint8 uartlcr;
++ uint8 PAD[3];
++ uint8 uartmcr;
++ uint8 PAD[3];
++ uint8 uartlsr;
++ uint8 PAD[3];
++ uint8 uartmsr;
++ uint8 PAD[3];
++ uint8 uartscratch;
++ uint8 PAD[3];
++} extifregs_t;
++
++/* corecontrol */
++#define CC_UE (1 << 0) /* uart enable */
++
++/* extstatus */
++#define ES_EM (1 << 0) /* endian mode (ro) */
++#define ES_EI (1 << 1) /* external interrupt pin (ro) */
++#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */
++
++/* gpio bit mask */
++#define GPIO_BIT0 (1 << 0)
++#define GPIO_BIT1 (1 << 1)
++#define GPIO_BIT2 (1 << 2)
++#define GPIO_BIT3 (1 << 3)
++#define GPIO_BIT4 (1 << 4)
++#define GPIO_BIT5 (1 << 5)
++#define GPIO_BIT6 (1 << 6)
++#define GPIO_BIT7 (1 << 7)
++
++
++/* pcmcia/prog/flash_config */
++#define CF_EN (1 << 0) /* enable */
++#define CF_EM_MASK 0xe /* mode */
++#define CF_EM_SHIFT 1
++#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */
++#define CF_EM_SYNC 0x2 /* synchronous mode */
++#define CF_EM_PCMCIA 0x4 /* pcmcia mode */
++#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */
++#define CF_BS (1 << 5) /* byteswap */
++#define CF_CD_MASK 0xc0 /* clock divider */
++#define CF_CD_SHIFT 6
++#define CF_CD_DIV2 0x0 /* backplane/2 */
++#define CF_CD_DIV3 0x40 /* backplane/3 */
++#define CF_CD_DIV4 0x80 /* backplane/4 */
++#define CF_CE (1 << 8) /* clock enable */
++#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */
++
++/* pcmcia_memwait */
++#define PM_W0_MASK 0x3f /* waitcount0 */
++#define PM_W1_MASK 0x1f00 /* waitcount1 */
++#define PM_W1_SHIFT 8
++#define PM_W2_MASK 0x1f0000 /* waitcount2 */
++#define PM_W2_SHIFT 16
++#define PM_W3_MASK 0x1f000000 /* waitcount3 */
++#define PM_W3_SHIFT 24
++
++/* pcmcia_attrwait */
++#define PA_W0_MASK 0x3f /* waitcount0 */
++#define PA_W1_MASK 0x1f00 /* waitcount1 */
++#define PA_W1_SHIFT 8
++#define PA_W2_MASK 0x1f0000 /* waitcount2 */
++#define PA_W2_SHIFT 16
++#define PA_W3_MASK 0x1f000000 /* waitcount3 */
++#define PA_W3_SHIFT 24
++
++/* pcmcia_iowait */
++#define PI_W0_MASK 0x3f /* waitcount0 */
++#define PI_W1_MASK 0x1f00 /* waitcount1 */
++#define PI_W1_SHIFT 8
++#define PI_W2_MASK 0x1f0000 /* waitcount2 */
++#define PI_W2_SHIFT 16
++#define PI_W3_MASK 0x1f000000 /* waitcount3 */
++#define PI_W3_SHIFT 24
++
++/* prog_waitcount */
++#define PW_W0_MASK 0x0000001f /* waitcount0 */
++#define PW_W1_MASK 0x00001f00 /* waitcount1 */
++#define PW_W1_SHIFT 8
++#define PW_W2_MASK 0x001f0000 /* waitcount2 */
++#define PW_W2_SHIFT 16
++#define PW_W3_MASK 0x1f000000 /* waitcount3 */
++#define PW_W3_SHIFT 24
++
++#define PW_W0 0x0000000c
++#define PW_W1 0x00000a00
++#define PW_W2 0x00020000
++#define PW_W3 0x01000000
++
++/* flash_waitcount */
++#define FW_W0_MASK 0x1f /* waitcount0 */
++#define FW_W1_MASK 0x1f00 /* waitcount1 */
++#define FW_W1_SHIFT 8
++#define FW_W2_MASK 0x1f0000 /* waitcount2 */
++#define FW_W2_SHIFT 16
++#define FW_W3_MASK 0x1f000000 /* waitcount3 */
++#define FW_W3_SHIFT 24
++
++/* watchdog */
++#define WATCHDOG_CLOCK 48000000 /* Hz */
++
++/* clockcontrol_n */
++#define CN_N1_MASK 0x3f /* n1 control */
++#define CN_N2_MASK 0x3f00 /* n2 control */
++#define CN_N2_SHIFT 8
++
++/* clockcontrol_sb/pci/mii */
++#define CC_M1_MASK 0x3f /* m1 control */
++#define CC_M2_MASK 0x3f00 /* m2 control */
++#define CC_M2_SHIFT 8
++#define CC_M3_MASK 0x3f0000 /* m3 control */
++#define CC_M3_SHIFT 16
++#define CC_MC_MASK 0x1f000000 /* mux control */
++#define CC_MC_SHIFT 24
++
++/* Clock control default values */
++#define CC_DEF_N 0x0009 /* Default values for bcm4710 */
++#define CC_DEF_100 0x04020011
++#define CC_DEF_33 0x11030011
++#define CC_DEF_25 0x11050011
++
++/* Clock control values for 125Mhz */
++#define CC_125_N 0x0802
++#define CC_125_M 0x04020009
++#define CC_125_M25 0x11090009
++#define CC_125_M33 0x11090005
++
++/* Clock control magic field values */
++#define CC_F6_2 0x02 /* A factor of 2 in */
++#define CC_F6_3 0x03 /* 6-bit fields like */
++#define CC_F6_4 0x05 /* N1, M1 or M3 */
++#define CC_F6_5 0x09
++#define CC_F6_6 0x11
++#define CC_F6_7 0x21
++
++#define CC_F5_BIAS 5 /* 5-bit fields get this added */
++
++#define CC_MC_BYPASS 0x08
++#define CC_MC_M1 0x04
++#define CC_MC_M1M2 0x02
++#define CC_MC_M1M2M3 0x01
++#define CC_MC_M1M3 0x11
++
++#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */
++
++#endif /* _SBEXTIF_H */
+diff -urN linux.old/arch/mips/bcm947xx/include/sbhndmips.h linux.dev/arch/mips/bcm947xx/include/sbhndmips.h
+--- linux.old/arch/mips/bcm947xx/include/sbhndmips.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbhndmips.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,47 @@
++/*
++ * Broadcom SiliconBackplane MIPS definitions
++ *
++ * SB MIPS cores are custom MIPS32 processors with SiliconBackplane
++ * OCP interfaces. The CP0 processor ID is 0x00024000, where bits
++ * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP
++ * interface. The core revision is stored in the SB ID register in SB
++ * configuration space.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbhndmips.h,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $
++ */
++
++#ifndef _sbhndmips_h_
++#define _sbhndmips_h_
++
++#include <mipsinc.h>
++
++#ifndef _LANGUAGE_ASSEMBLY
++
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define _PADLINE(line) pad ## line
++#define _XSTR(line) _PADLINE(line)
++#define PAD _XSTR(__LINE__)
++#endif /* PAD */
++
++typedef volatile struct {
++ uint32 corecontrol;
++ uint32 PAD[2];
++ uint32 biststatus;
++ uint32 PAD[4];
++ uint32 intstatus;
++ uint32 intmask;
++ uint32 timer;
++} mipsregs_t;
++
++#endif /* _LANGUAGE_ASSEMBLY */
++
++#endif /* _sbhndmips_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/sbmemc.h linux.dev/arch/mips/bcm947xx/include/sbmemc.h
+--- linux.old/arch/mips/bcm947xx/include/sbmemc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbmemc.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,147 @@
++/*
++ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbmemc.h,v 1.6 2006/03/02 12:33:44 honor Exp $
++ */
++
++#ifndef _SBMEMC_H
++#define _SBMEMC_H
++
++#ifdef _LANGUAGE_ASSEMBLY
++
++#define MEMC_CONTROL 0x00
++#define MEMC_CONFIG 0x04
++#define MEMC_REFRESH 0x08
++#define MEMC_BISTSTAT 0x0c
++#define MEMC_MODEBUF 0x10
++#define MEMC_BKCLS 0x14
++#define MEMC_PRIORINV 0x18
++#define MEMC_DRAMTIM 0x1c
++#define MEMC_INTSTAT 0x20
++#define MEMC_INTMASK 0x24
++#define MEMC_INTINFO 0x28
++#define MEMC_NCDLCTL 0x30
++#define MEMC_RDNCDLCOR 0x34
++#define MEMC_WRNCDLCOR 0x38
++#define MEMC_MISCDLYCTL 0x3c
++#define MEMC_DQSGATENCDL 0x40
++#define MEMC_SPARE 0x44
++#define MEMC_TPADDR 0x48
++#define MEMC_TPDATA 0x4c
++#define MEMC_BARRIER 0x50
++#define MEMC_CORE 0x54
++
++#else /* !_LANGUAGE_ASSEMBLY */
++
++/* Sonics side: MEMC core registers */
++typedef volatile struct sbmemcregs {
++ uint32 control;
++ uint32 config;
++ uint32 refresh;
++ uint32 biststat;
++ uint32 modebuf;
++ uint32 bkcls;
++ uint32 priorinv;
++ uint32 dramtim;
++ uint32 intstat;
++ uint32 intmask;
++ uint32 intinfo;
++ uint32 reserved1;
++ uint32 ncdlctl;
++ uint32 rdncdlcor;
++ uint32 wrncdlcor;
++ uint32 miscdlyctl;
++ uint32 dqsgatencdl;
++ uint32 spare;
++ uint32 tpaddr;
++ uint32 tpdata;
++ uint32 barrier;
++ uint32 core;
++} sbmemcregs_t;
++
++#endif /* _LANGUAGE_ASSEMBLY */
++
++/* MEMC Core Init values (OCP ID 0x80f) */
++
++/* For sdr: */
++#define MEMC_SD_CONFIG_INIT 0x00048000
++#define MEMC_SD_DRAMTIM2_INIT 0x000754d8
++#define MEMC_SD_DRAMTIM3_INIT 0x000754da
++#define MEMC_SD_RDNCDLCOR_INIT 0x00000000
++#define MEMC_SD_WRNCDLCOR_INIT 0x49351200
++#define MEMC_SD1_WRNCDLCOR_INIT 0x14500200 /* For corerev 1 (4712) */
++#define MEMC_SD_MISCDLYCTL_INIT 0x00061c1b
++#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416 /* For corerev 1 (4712) */
++#define MEMC_SD_CONTROL_INIT0 0x00000002
++#define MEMC_SD_CONTROL_INIT1 0x00000008
++#define MEMC_SD_CONTROL_INIT2 0x00000004
++#define MEMC_SD_CONTROL_INIT3 0x00000010
++#define MEMC_SD_CONTROL_INIT4 0x00000001
++#define MEMC_SD_MODEBUF_INIT 0x00000000
++#define MEMC_SD_REFRESH_INIT 0x0000840f
++
++
++/* This is for SDRM8X8X4 */
++#define MEMC_SDR_INIT 0x0008
++#define MEMC_SDR_MODE 0x32
++#define MEMC_SDR_NCDL 0x00020032
++#define MEMC_SDR1_NCDL 0x0002020f /* For corerev 1 (4712) */
++
++/* For ddr: */
++#define MEMC_CONFIG_INIT 0x00048000
++#define MEMC_DRAMTIM2_INIT 0x000754d8
++#define MEMC_DRAMTIM25_INIT 0x000754d9
++#define MEMC_RDNCDLCOR_INIT 0x00000000
++#define MEMC_RDNCDLCOR_SIMINIT 0xf6f6f6f6 /* For hdl sim */
++#define MEMC_WRNCDLCOR_INIT 0x49351200
++#define MEMC_1_WRNCDLCOR_INIT 0x14500200
++#define MEMC_DQSGATENCDL_INIT 0x00030000
++#define MEMC_MISCDLYCTL_INIT 0x21061c1b
++#define MEMC_1_MISCDLYCTL_INIT 0x21021400
++#define MEMC_NCDLCTL_INIT 0x00002001
++#define MEMC_CONTROL_INIT0 0x00000002
++#define MEMC_CONTROL_INIT1 0x00000008
++#define MEMC_MODEBUF_INIT0 0x00004000
++#define MEMC_CONTROL_INIT2 0x00000010
++#define MEMC_MODEBUF_INIT1 0x00000100
++#define MEMC_CONTROL_INIT3 0x00000010
++#define MEMC_CONTROL_INIT4 0x00000008
++#define MEMC_REFRESH_INIT 0x0000840f
++#define MEMC_CONTROL_INIT5 0x00000004
++#define MEMC_MODEBUF_INIT2 0x00000000
++#define MEMC_CONTROL_INIT6 0x00000010
++#define MEMC_CONTROL_INIT7 0x00000001
++
++
++/* This is for DDRM16X16X2 */
++#define MEMC_DDR_INIT 0x0009
++#define MEMC_DDR_MODE 0x62
++#define MEMC_DDR_NCDL 0x0005050a
++#define MEMC_DDR1_NCDL 0x00000a0a /* For corerev 1 (4712) */
++
++/* mask for sdr/ddr calibration registers */
++#define MEMC_RDNCDLCOR_RD_MASK 0x000000ff
++#define MEMC_WRNCDLCOR_WR_MASK 0x000000ff
++#define MEMC_DQSGATENCDL_G_MASK 0x000000ff
++
++/* masks for miscdlyctl registers */
++#define MEMC_MISC_SM_MASK 0x30000000
++#define MEMC_MISC_SM_SHIFT 28
++#define MEMC_MISC_SD_MASK 0x0f000000
++#define MEMC_MISC_SD_SHIFT 24
++
++/* hw threshhold for calculating wr/rd for sdr memc */
++#define MEMC_CD_THRESHOLD 128
++
++/* Low bit of init register says if memc is ddr or sdr */
++#define MEMC_CONFIG_DDR 0x00000001
++
++#endif /* _SBMEMC_H */
+diff -urN linux.old/arch/mips/bcm947xx/include/sbpcie.h linux.dev/arch/mips/bcm947xx/include/sbpcie.h
+--- linux.old/arch/mips/bcm947xx/include/sbpcie.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbpcie.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,200 @@
++/*
++ * BCM43XX SiliconBackplane PCIE core hardware definitions.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbpcie.h,v 1.1.1.2 2006/02/27 03:43:16 honor Exp $
++ */
++
++#ifndef _SBPCIE_H
++#define _SBPCIE_H
++
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define _PADLINE(line) pad ## line
++#define _XSTR(line) _PADLINE(line)
++#define PAD _XSTR(__LINE__)
++#endif
++
++/* PCIE Enumeration space offsets */
++#define PCIE_CORE_CONFIG_OFFSET 0x0
++#define PCIE_FUNC0_CONFIG_OFFSET 0x400
++#define PCIE_FUNC1_CONFIG_OFFSET 0x500
++#define PCIE_FUNC2_CONFIG_OFFSET 0x600
++#define PCIE_FUNC3_CONFIG_OFFSET 0x700
++#define PCIE_SPROM_SHADOW_OFFSET 0x800
++#define PCIE_SBCONFIG_OFFSET 0xE00
++
++/* PCIE Bar0 Address Mapping. Each function maps 16KB config space */
++#define PCIE_DEV_BAR0_SIZE 0x4000
++#define PCIE_BAR0_WINMAPCORE_OFFSET 0x0
++#define PCIE_BAR0_EXTSPROM_OFFSET 0x1000
++#define PCIE_BAR0_PCIECORE_OFFSET 0x2000
++#define PCIE_BAR0_CCCOREREG_OFFSET 0x3000
++
++/* SB side: PCIE core and host control registers */
++typedef struct sbpcieregs {
++ uint32 PAD[3];
++ uint32 biststatus; /* bist Status: 0x00C */
++ uint32 PAD[6];
++ uint32 sbtopcimailbox; /* sb to pcie mailbox: 0x028 */
++ uint32 PAD[54];
++ uint32 sbtopcie0; /* sb to pcie translation 0: 0x100 */
++ uint32 sbtopcie1; /* sb to pcie translation 1: 0x104 */
++ uint32 sbtopcie2; /* sb to pcie translation 2: 0x108 */
++ uint32 PAD[4];
++
++ /* pcie core supports in direct access to config space */
++ uint32 configaddr; /* pcie config space access: Address field: 0x120 */
++ uint32 configdata; /* pcie config space access: Data field: 0x124 */
++
++ /* mdio access to serdes */
++ uint32 mdiocontrol; /* controls the mdio access: 0x128 */
++ uint32 mdiodata; /* Data to the mdio access: 0x12c */
++
++ /* pcie protocol phy/dllp/tlp register access mechanism */
++ uint32 pcieaddr; /* address of the internal registeru: 0x130 */
++ uint32 pciedata; /* Data to/from the internal regsiter: 0x134 */
++
++ uint32 PAD[434];
++ uint16 sprom[36]; /* SPROM shadow Area */
++} sbpcieregs_t;
++
++/* SB to PCIE translation masks */
++#define SBTOPCIE0_MASK 0xfc000000
++#define SBTOPCIE1_MASK 0xfc000000
++#define SBTOPCIE2_MASK 0xc0000000
++
++/* Access type bits (0:1) */
++#define SBTOPCIE_MEM 0
++#define SBTOPCIE_IO 1
++#define SBTOPCIE_CFG0 2
++#define SBTOPCIE_CFG1 3
++
++/* Prefetch enable bit 2 */
++#define SBTOPCIE_PF 4
++
++/* Write Burst enable for memory write bit 3 */
++#define SBTOPCIE_WR_BURST 8
++
++/* config access */
++#define CONFIGADDR_FUNC_MASK 0x7000
++#define CONFIGADDR_FUNC_SHF 12
++#define CONFIGADDR_REG_MASK 0x0FFF
++#define CONFIGADDR_REG_SHF 0
++
++/* PCIE protocol regs Indirect Address */
++#define PCIEADDR_PROT_MASK 0x300
++#define PCIEADDR_PROT_SHF 8
++#define PCIEADDR_PL_TLP 0
++#define PCIEADDR_PL_DLLP 1
++#define PCIEADDR_PL_PLP 2
++
++/* PCIE protocol PHY diagnostic registers */
++#define PCIE_PLP_MODEREG 0x200 /* Mode */
++#define PCIE_PLP_STATUSREG 0x204 /* Status */
++#define PCIE_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */
++#define PCIE_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */
++#define PCIE_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */
++#define PCIE_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */
++#define PCIE_PLP_ATTNREG 0x218 /* Attention */
++#define PCIE_PLP_ATTNMASKREG 0x21C /* Attention Mask */
++#define PCIE_PLP_RXERRCTR 0x220 /* Rx Error */
++#define PCIE_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */
++#define PCIE_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */
++#define PCIE_PLP_TESTCTRLREG 0x22C /* Test Control reg */
++#define PCIE_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */
++#define PCIE_PLP_TIMINGOVRDREG 0x234 /* Timing param override */
++#define PCIE_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */
++#define PCIE_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */
++
++/* PCIE protocol DLLP diagnostic registers */
++#define PCIE_DLLP_LCREG 0x100 /* Link Control */
++#define PCIE_DLLP_LSREG 0x104 /* Link Status */
++#define PCIE_DLLP_LAREG 0x108 /* Link Attention */
++#define PCIE_DLLP_LAMASKREG 0x10C /* Link Attention Mask */
++#define PCIE_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */
++#define PCIE_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */
++#define PCIE_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */
++#define PCIE_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */
++#define PCIE_DLLP_LRREG 0x120 /* Link Replay */
++#define PCIE_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */
++#define PCIE_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */
++#define PCIE_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */
++#define PCIE_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */
++#define PCIE_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */
++#define PCIE_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */
++#define PCIE_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */
++#define PCIE_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */
++#define PCIE_DLLP_ERRCTRREG 0x144 /* Error Counter */
++#define PCIE_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */
++#define PCIE_DLLP_TESTREG 0x14C /* Test */
++#define PCIE_DLLP_PKTBIST 0x150 /* Packet BIST */
++
++/* PCIE protocol TLP diagnostic registers */
++#define PCIE_TLP_CONFIGREG 0x000 /* Configuration */
++#define PCIE_TLP_WORKAROUNDSREG 0x004 /* TLP Workarounds */
++#define PCIE_TLP_WRDMAUPPER 0x010 /* Write DMA Upper Address */
++#define PCIE_TLP_WRDMALOWER 0x014 /* Write DMA Lower Address */
++#define PCIE_TLP_WRDMAREQ_LBEREG 0x018 /* Write DMA Len/ByteEn Req */
++#define PCIE_TLP_RDDMAUPPER 0x01C /* Read DMA Upper Address */
++#define PCIE_TLP_RDDMALOWER 0x020 /* Read DMA Lower Address */
++#define PCIE_TLP_RDDMALENREG 0x024 /* Read DMA Len Req */
++#define PCIE_TLP_MSIDMAUPPER 0x028 /* MSI DMA Upper Address */
++#define PCIE_TLP_MSIDMALOWER 0x02C /* MSI DMA Lower Address */
++#define PCIE_TLP_MSIDMALENREG 0x030 /* MSI DMA Len Req */
++#define PCIE_TLP_SLVREQLENREG 0x034 /* Slave Request Len */
++#define PCIE_TLP_FCINPUTSREQ 0x038 /* Flow Control Inputs */
++#define PCIE_TLP_TXSMGRSREQ 0x03C /* Tx StateMachine and Gated Req */
++#define PCIE_TLP_ADRACKCNTARBLEN 0x040 /* Address Ack XferCnt and ARB Len */
++#define PCIE_TLP_DMACPLHDR0 0x044 /* DMA Completion Hdr 0 */
++#define PCIE_TLP_DMACPLHDR1 0x048 /* DMA Completion Hdr 1 */
++#define PCIE_TLP_DMACPLHDR2 0x04C /* DMA Completion Hdr 2 */
++#define PCIE_TLP_DMACPLMISC0 0x050 /* DMA Completion Misc0 */
++#define PCIE_TLP_DMACPLMISC1 0x054 /* DMA Completion Misc1 */
++#define PCIE_TLP_DMACPLMISC2 0x058 /* DMA Completion Misc2 */
++#define PCIE_TLP_SPTCTRLLEN 0x05C /* Split Controller Req len */
++#define PCIE_TLP_SPTCTRLMSIC0 0x060 /* Split Controller Misc 0 */
++#define PCIE_TLP_SPTCTRLMSIC1 0x064 /* Split Controller Misc 1 */
++#define PCIE_TLP_BUSDEVFUNC 0x068 /* Bus/Device/Func */
++#define PCIE_TLP_RESETCTR 0x06C /* Reset Counter */
++#define PCIE_TLP_RTRYBUF 0x070 /* Retry Buffer value */
++#define PCIE_TLP_TGTDEBUG1 0x074 /* Target Debug Reg1 */
++#define PCIE_TLP_TGTDEBUG2 0x078 /* Target Debug Reg2 */
++#define PCIE_TLP_TGTDEBUG3 0x07C /* Target Debug Reg3 */
++#define PCIE_TLP_TGTDEBUG4 0x080 /* Target Debug Reg4 */
++
++/* MDIO control */
++#define MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */
++#define MDIOCTL_DIVISOR_VAL 0x2
++#define MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */
++#define MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */
++
++/* MDIO Data */
++#define MDIODATA_MASK 0x0000ffff /* data 2 bytes */
++#define MDIODATA_TA 0x00020000 /* Turnaround */
++#define MDIODATA_REGADDR_SHF 18 /* Regaddr shift */
++#define MDIODATA_REGADDR_MASK 0x003c0000 /* Regaddr Mask */
++#define MDIODATA_DEVADDR_SHF 22 /* Physmedia devaddr shift */
++#define MDIODATA_DEVADDR_MASK 0x0fc00000 /* Physmedia devaddr Mask */
++#define MDIODATA_WRITE 0x10000000 /* write Transaction */
++#define MDIODATA_READ 0x20000000 /* Read Transaction */
++#define MDIODATA_START 0x40000000 /* start of Transaction */
++
++/* MDIO devices (SERDES modules) */
++#define MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */
++#define MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */
++#define MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */
++
++/* SERDES registers */
++#define SERDES_RX_TIMER1 2 /* Rx Timer1 */
++#define SERDES_RX_CDR 6 /* CDR */
++#define SERDES_RX_CDRBW 7 /* CDR BW */
++
++#endif /* _SBPCIE_H */
+diff -urN linux.old/arch/mips/bcm947xx/include/sbpci.h linux.dev/arch/mips/bcm947xx/include/sbpci.h
+--- linux.old/arch/mips/bcm947xx/include/sbpci.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbpci.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,114 @@
++/*
++ * HND SiliconBackplane PCI core hardware definitions.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbpci.h,v 1.1.1.11 2006/02/27 03:43:16 honor Exp $
++ */
++
++#ifndef _sbpci_h_
++#define _sbpci_h_
++
++#ifndef _LANGUAGE_ASSEMBLY
++
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define _PADLINE(line) pad ## line
++#define _XSTR(line) _PADLINE(line)
++#define PAD _XSTR(__LINE__)
++#endif
++
++/* Sonics side: PCI core and host control registers */
++typedef struct sbpciregs {
++ uint32 control; /* PCI control */
++ uint32 PAD[3];
++ uint32 arbcontrol; /* PCI arbiter control */
++ uint32 PAD[3];
++ uint32 intstatus; /* Interrupt status */
++ uint32 intmask; /* Interrupt mask */
++ uint32 sbtopcimailbox; /* Sonics to PCI mailbox */
++ uint32 PAD[9];
++ uint32 bcastaddr; /* Sonics broadcast address */
++ uint32 bcastdata; /* Sonics broadcast data */
++ uint32 PAD[2];
++ uint32 gpioin; /* ro: gpio input (>=rev2) */
++ uint32 gpioout; /* rw: gpio output (>=rev2) */
++ uint32 gpioouten; /* rw: gpio output enable (>= rev2) */
++ uint32 gpiocontrol; /* rw: gpio control (>= rev2) */
++ uint32 PAD[36];
++ uint32 sbtopci0; /* Sonics to PCI translation 0 */
++ uint32 sbtopci1; /* Sonics to PCI translation 1 */
++ uint32 sbtopci2; /* Sonics to PCI translation 2 */
++ uint32 PAD[189];
++ uint32 pcicfg[4][64]; /* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */
++ uint16 sprom[36]; /* SPROM shadow Area */
++ uint32 PAD[46];
++} sbpciregs_t;
++
++#endif /* _LANGUAGE_ASSEMBLY */
++
++/* PCI control */
++#define PCI_RST_OE 0x01 /* When set, drives PCI_RESET out to pin */
++#define PCI_RST 0x02 /* Value driven out to pin */
++#define PCI_CLK_OE 0x04 /* When set, drives clock as gated by PCI_CLK out to pin */
++#define PCI_CLK 0x08 /* Gate for clock driven out to pin */
++
++/* PCI arbiter control */
++#define PCI_INT_ARB 0x01 /* When set, use an internal arbiter */
++#define PCI_EXT_ARB 0x02 /* When set, use an external arbiter */
++/* ParkID - for PCI corerev >= 8 */
++#define PCI_PARKID_MASK 0x1c /* Selects which agent is parked on an idle bus */
++#define PCI_PARKID_SHIFT 2
++#define PCI_PARKID_EXT0 0 /* External master 0 */
++#define PCI_PARKID_EXT1 1 /* External master 1 */
++#define PCI_PARKID_EXT2 2 /* External master 2 */
++#define PCI_PARKID_INT 3 /* Internal master */
++#define PCI_PARKID_LAST 4 /* Last active master */
++
++/* Interrupt status/mask */
++#define PCI_INTA 0x01 /* PCI INTA# is asserted */
++#define PCI_INTB 0x02 /* PCI INTB# is asserted */
++#define PCI_SERR 0x04 /* PCI SERR# has been asserted (write one to clear) */
++#define PCI_PERR 0x08 /* PCI PERR# has been asserted (write one to clear) */
++#define PCI_PME 0x10 /* PCI PME# is asserted */
++
++/* (General) PCI/SB mailbox interrupts, two bits per pci function */
++#define MAILBOX_F0_0 0x100 /* function 0, int 0 */
++#define MAILBOX_F0_1 0x200 /* function 0, int 1 */
++#define MAILBOX_F1_0 0x400 /* function 1, int 0 */
++#define MAILBOX_F1_1 0x800 /* function 1, int 1 */
++#define MAILBOX_F2_0 0x1000 /* function 2, int 0 */
++#define MAILBOX_F2_1 0x2000 /* function 2, int 1 */
++#define MAILBOX_F3_0 0x4000 /* function 3, int 0 */
++#define MAILBOX_F3_1 0x8000 /* function 3, int 1 */
++
++/* Sonics broadcast address */
++#define BCAST_ADDR_MASK 0xff /* Broadcast register address */
++
++/* Sonics to PCI translation types */
++#define SBTOPCI0_MASK 0xfc000000
++#define SBTOPCI1_MASK 0xfc000000
++#define SBTOPCI2_MASK 0xc0000000
++#define SBTOPCI_MEM 0
++#define SBTOPCI_IO 1
++#define SBTOPCI_CFG0 2
++#define SBTOPCI_CFG1 3
++#define SBTOPCI_PREF 0x4 /* prefetch enable */
++#define SBTOPCI_BURST 0x8 /* burst enable */
++#define SBTOPCI_RC_MASK 0x30 /* read command (>= rev11) */
++#define SBTOPCI_RC_READ 0x00 /* memory read */
++#define SBTOPCI_RC_READLINE 0x10 /* memory read line */
++#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */
++
++/* PCI core index in SROM shadow area */
++#define SRSH_PI_OFFSET 0 /* first word */
++#define SRSH_PI_MASK 0xf000 /* bit 15:12 */
++#define SRSH_PI_SHIFT 12 /* bit 15:12 */
++
++#endif /* _sbpci_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/sbpcmcia.h linux.dev/arch/mips/bcm947xx/include/sbpcmcia.h
+--- linux.old/arch/mips/bcm947xx/include/sbpcmcia.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbpcmcia.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,147 @@
++/*
++ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbpcmcia.h,v 1.1.1.9 2006/02/27 03:43:16 honor Exp $
++ */
++
++#ifndef _SBPCMCIA_H
++#define _SBPCMCIA_H
++
++
++/* All the addresses that are offsets in attribute space are divided
++ * by two to account for the fact that odd bytes are invalid in
++ * attribute space and our read/write routines make the space appear
++ * as if they didn't exist. Still we want to show the original numbers
++ * as documented in the hnd_pcmcia core manual.
++ */
++
++/* PCMCIA Function Configuration Registers */
++#define PCMCIA_FCR (0x700 / 2)
++
++#define FCR0_OFF 0
++#define FCR1_OFF (0x40 / 2)
++#define FCR2_OFF (0x80 / 2)
++#define FCR3_OFF (0xc0 / 2)
++
++#define PCMCIA_FCR0 (0x700 / 2)
++#define PCMCIA_FCR1 (0x740 / 2)
++#define PCMCIA_FCR2 (0x780 / 2)
++#define PCMCIA_FCR3 (0x7c0 / 2)
++
++/* Standard PCMCIA FCR registers */
++
++#define PCMCIA_COR 0
++
++#define COR_RST 0x80
++#define COR_LEV 0x40
++#define COR_IRQEN 0x04
++#define COR_BLREN 0x01
++#define COR_FUNEN 0x01
++
++
++#define PCICIA_FCSR (2 / 2)
++#define PCICIA_PRR (4 / 2)
++#define PCICIA_SCR (6 / 2)
++#define PCICIA_ESR (8 / 2)
++
++
++#define PCM_MEMOFF 0x0000
++#define F0_MEMOFF 0x1000
++#define F1_MEMOFF 0x2000
++#define F2_MEMOFF 0x3000
++#define F3_MEMOFF 0x4000
++
++/* Memory base in the function fcr's */
++#define MEM_ADDR0 (0x728 / 2)
++#define MEM_ADDR1 (0x72a / 2)
++#define MEM_ADDR2 (0x72c / 2)
++
++/* PCMCIA base plus Srom access in fcr0: */
++#define PCMCIA_ADDR0 (0x072e / 2)
++#define PCMCIA_ADDR1 (0x0730 / 2)
++#define PCMCIA_ADDR2 (0x0732 / 2)
++
++#define MEM_SEG (0x0734 / 2)
++#define SROM_CS (0x0736 / 2)
++#define SROM_DATAL (0x0738 / 2)
++#define SROM_DATAH (0x073a / 2)
++#define SROM_ADDRL (0x073c / 2)
++#define SROM_ADDRH (0x073e / 2)
++
++/* Values for srom_cs: */
++#define SROM_IDLE 0
++#define SROM_WRITE 1
++#define SROM_READ 2
++#define SROM_WEN 4
++#define SROM_WDS 7
++#define SROM_DONE 8
++
++/* CIS stuff */
++
++/* The CIS stops where the FCRs start */
++#define CIS_SIZE PCMCIA_FCR
++
++/* Standard tuples we know about */
++
++#define CISTPL_MANFID 0x20 /* Manufacturer and device id */
++#define CISTPL_FUNCE 0x22 /* Function extensions */
++#define CISTPL_CFTABLE 0x1b /* Config table entry */
++
++/* Function extensions for LANs */
++
++#define LAN_TECH 1 /* Technology type */
++#define LAN_SPEED 2 /* Raw bit rate */
++#define LAN_MEDIA 3 /* Transmission media */
++#define LAN_NID 4 /* Node identification (aka MAC addr) */
++#define LAN_CONN 5 /* Connector standard */
++
++
++/* CFTable */
++#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */
++#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */
++#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */
++
++/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll
++ * take one for HNBU, and use "extensions" (a la FUNCE) within it.
++ */
++
++#define CISTPL_BRCM_HNBU 0x80
++
++/* Subtypes of BRCM_HNBU: */
++
++#define HNBU_SROMREV 0x00 /* A byte with sromrev, 1 if not present */
++#define HNBU_CHIPID 0x01 /* Two 16bit values: PCI vendor & device id */
++#define HNBU_BOARDREV 0x02 /* One byte board revision */
++#define HNBU_PAPARMS 0x03 /* PA parameters: 8 (sromrev == 1)
++ * or 9 (sromrev > 1) bytes
++ */
++#define HNBU_OEM 0x04 /* Eight bytes OEM data (sromrev == 1) */
++#define HNBU_CC 0x05 /* Default country code (sromrev == 1) */
++#define HNBU_AA 0x06 /* Antennas available */
++#define HNBU_AG 0x07 /* Antenna gain */
++#define HNBU_BOARDFLAGS 0x08 /* board flags (2 or 4 bytes) */
++#define HNBU_LEDS 0x09 /* LED set */
++#define HNBU_CCODE 0x0a /* Country code (2 bytes ascii + 1 byte cctl)
++ * in rev 2
++ */
++#define HNBU_CCKPO 0x0b /* 2 byte cck power offsets in rev 3 */
++#define HNBU_OFDMPO 0x0c /* 4 byte 11g ofdm power offsets in rev 3 */
++#define HNBU_GPIOTIMER 0x0d /* 2 bytes with on/off values in rev 3 */
++
++
++/* sbtmstatelow */
++#define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */
++#define SBTML_INT_EN 0x20000 /* enable sb interrupt */
++
++/* sbtmstatehigh */
++#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */
++
++#endif /* _SBPCMCIA_H */
+diff -urN linux.old/arch/mips/bcm947xx/include/sbsdram.h linux.dev/arch/mips/bcm947xx/include/sbsdram.h
+--- linux.old/arch/mips/bcm947xx/include/sbsdram.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbsdram.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,85 @@
++/*
++ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbsdram.h,v 1.1.1.9 2006/03/02 13:03:52 honor Exp $
++ */
++
++#ifndef _SBSDRAM_H
++#define _SBSDRAM_H
++
++#ifndef _LANGUAGE_ASSEMBLY
++
++/* Sonics side: SDRAM core registers */
++typedef volatile struct sbsdramregs {
++ uint32 initcontrol; /* Generates external SDRAM initialization sequence */
++ uint32 config; /* Initializes external SDRAM mode register */
++ uint32 refresh; /* Controls external SDRAM refresh rate */
++ uint32 pad1;
++ uint32 pad2;
++} sbsdramregs_t;
++
++/* SDRAM simulation */
++#ifdef RAMSZ
++#define SDRAMSZ RAMSZ
++#else
++#define SDRAMSZ (4 * 1024 * 1024)
++#endif
++
++extern uchar sdrambuf[SDRAMSZ];
++
++#endif /* _LANGUAGE_ASSEMBLY */
++
++/* SDRAM initialization control (initcontrol) register bits */
++#define SDRAM_CBR 0x0001 /* Writing 1 generates refresh cycle and toggles bit */
++#define SDRAM_PRE 0x0002 /* Writing 1 generates precharge cycle and toggles bit */
++#define SDRAM_MRS 0x0004 /* Writing 1 generates mode register select cycle and toggles bit */
++#define SDRAM_EN 0x0008 /* When set, enables access to SDRAM */
++#define SDRAM_16Mb 0x0000 /* Use 16 Megabit SDRAM */
++#define SDRAM_64Mb 0x0010 /* Use 64 Megabit SDRAM */
++#define SDRAM_128Mb 0x0020 /* Use 128 Megabit SDRAM */
++#define SDRAM_RSVMb 0x0030 /* Use special SDRAM */
++#define SDRAM_RST 0x0080 /* Writing 1 causes soft reset of controller */
++#define SDRAM_SELFREF 0x0100 /* Writing 1 enables self refresh mode */
++#define SDRAM_PWRDOWN 0x0200 /* Writing 1 causes controller to power down */
++#define SDRAM_32BIT 0x0400 /* When set, indicates 32 bit SDRAM interface */
++#define SDRAM_9BITCOL 0x0800 /* When set, indicates 9 bit column */
++
++/* SDRAM configuration (config) register bits */
++#define SDRAM_BURSTFULL 0x0000 /* Use full page bursts */
++#define SDRAM_BURST8 0x0001 /* Use burst of 8 */
++#define SDRAM_BURST4 0x0002 /* Use burst of 4 */
++#define SDRAM_BURST2 0x0003 /* Use burst of 2 */
++#define SDRAM_CAS3 0x0000 /* Use CAS latency of 3 */
++#define SDRAM_CAS2 0x0004 /* Use CAS latency of 2 */
++
++/* SDRAM refresh control (refresh) register bits */
++#define SDRAM_REF(p) (((p)&0xff) | SDRAM_REF_EN) /* Refresh period */
++#define SDRAM_REF_EN 0x8000 /* Writing 1 enables periodic refresh */
++
++/* SDRAM Core default Init values (OCP ID 0x803) */
++#define SDRAM_INIT MEM4MX16X2
++#define SDRAM_CONFIG SDRAM_BURSTFULL
++#define SDRAM_REFRESH SDRAM_REF(0x40)
++
++#define MEM1MX16 0x009 /* 2 MB */
++#define MEM1MX16X2 0x409 /* 4 MB */
++#define MEM2MX8X2 0x809 /* 4 MB */
++#define MEM2MX8X4 0xc09 /* 8 MB */
++#define MEM2MX32 0x439 /* 8 MB */
++#define MEM4MX16 0x019 /* 8 MB */
++#define MEM4MX16X2 0x419 /* 16 MB */
++#define MEM8MX8X2 0x819 /* 16 MB */
++#define MEM8MX16 0x829 /* 16 MB */
++#define MEM4MX32 0x429 /* 16 MB */
++#define MEM8MX8X4 0xc19 /* 32 MB */
++#define MEM8MX16X2 0xc29 /* 32 MB */
++
++#endif /* _SBSDRAM_H */
+diff -urN linux.old/arch/mips/bcm947xx/include/sbsocram.h linux.dev/arch/mips/bcm947xx/include/sbsocram.h
+--- linux.old/arch/mips/bcm947xx/include/sbsocram.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbsocram.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,64 @@
++/*
++ * BCM47XX Sonics SiliconBackplane embedded ram core
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbsocram.h,v 1.1.1.3 2006/02/27 03:43:16 honor Exp $
++ */
++
++#ifndef _SBSOCRAM_H
++#define _SBSOCRAM_H
++
++#define SR_COREINFO 0x00
++#define SR_BWALLOC 0x04
++#define SR_BISTSTAT 0x0c
++#define SR_BANKINDEX 0x10
++#define SR_BANKSTBYCTL 0x14
++
++
++#ifndef _LANGUAGE_ASSEMBLY
++
++/* Memcsocram core registers */
++typedef volatile struct sbsocramregs {
++ uint32 coreinfo;
++ uint32 bwalloc;
++ uint32 PAD;
++ uint32 biststat;
++ uint32 bankidx;
++ uint32 standbyctrl;
++} sbsocramregs_t;
++
++#endif
++
++/* Coreinfo register */
++#define SRCI_PT_MASK 0x30000
++#define SRCI_PT_SHIFT 16
++
++/* In corerev 0, the memory size is 2 to the power of the
++ * base plus 16 plus to the contents of the memsize field plus 1.
++ */
++#define SRCI_MS0_MASK 0xf
++#define SR_MS0_BASE 16
++
++/*
++ * In corerev 1 the bank size is 2 ^ the bank size field plus 14,
++ * the memory size is number of banks times bank size.
++ * The same applies to rom size.
++ */
++#define SRCI_ROMNB_MASK 0xf000
++#define SRCI_ROMNB_SHIFT 12
++#define SRCI_ROMBSZ_MASK 0xf00
++#define SRCI_ROMBSZ_SHIFT 8
++#define SRCI_SRNB_MASK 0xf0
++#define SRCI_SRNB_SHIFT 4
++#define SRCI_SRBSZ_MASK 0xf
++#define SRCI_SRBSZ_SHIFT 0
++
++#define SR_BSZ_BASE 14
++#endif /* _SBSOCRAM_H */
+diff -urN linux.old/arch/mips/bcm947xx/include/sbutils.h linux.dev/arch/mips/bcm947xx/include/sbutils.h
+--- linux.old/arch/mips/bcm947xx/include/sbutils.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbutils.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,150 @@
++/*
++ * Misc utility routines for accessing chip-specific features
++ * of Broadcom HNBU SiliconBackplane-based chips.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbutils.h,v 1.4 2006/04/08 07:12:42 honor Exp $
++ */
++
++#ifndef _sbutils_h_
++#define _sbutils_h_
++
++/*
++ * Datastructure to export all chip specific common variables
++ * public (read-only) portion of sbutils handle returned by
++ * sb_attach()/sb_kattach()
++*/
++
++struct sb_pub {
++
++ uint bustype; /* SB_BUS, PCI_BUS */
++ uint buscoretype; /* SB_PCI, SB_PCMCIA, SB_PCIE */
++ uint buscorerev; /* buscore rev */
++ uint buscoreidx; /* buscore index */
++ int ccrev; /* chip common core rev */
++ uint boardtype; /* board type */
++ uint boardvendor; /* board vendor */
++ uint chip; /* chip number */
++ uint chiprev; /* chip revision */
++ uint chippkg; /* chip package option */
++ uint sonicsrev; /* sonics backplane rev */
++};
++
++typedef const struct sb_pub sb_t;
++
++/*
++ * Many of the routines below take an 'sbh' handle as their first arg.
++ * Allocate this by calling sb_attach(). Free it by calling sb_detach().
++ * At any one time, the sbh is logically focused on one particular sb core
++ * (the "current core").
++ * Use sb_setcore() or sb_setcoreidx() to change the association to another core.
++ */
++
++#define SB_OSH NULL /* Use for sb_kattach when no osh is available */
++/* exported externs */
++extern sb_t *sb_attach(uint pcidev, osl_t *osh, void *regs, uint bustype,
++ void *sdh, char **vars, uint *varsz);
++extern sb_t *sb_kattach(void);
++extern void sb_detach(sb_t *sbh);
++extern uint sb_chip(sb_t *sbh);
++extern uint sb_chiprev(sb_t *sbh);
++extern uint sb_chipcrev(sb_t *sbh);
++extern uint sb_chippkg(sb_t *sbh);
++extern uint sb_pcirev(sb_t *sbh);
++extern bool sb_war16165(sb_t *sbh);
++extern uint sb_pcmciarev(sb_t *sbh);
++extern uint sb_boardvendor(sb_t *sbh);
++extern uint sb_boardtype(sb_t *sbh);
++extern uint sb_bus(sb_t *sbh);
++extern uint sb_buscoretype(sb_t *sbh);
++extern uint sb_buscorerev(sb_t *sbh);
++extern uint sb_corelist(sb_t *sbh, uint coreid[]);
++extern uint sb_coreid(sb_t *sbh);
++extern uint sb_coreidx(sb_t *sbh);
++extern uint sb_coreunit(sb_t *sbh);
++extern uint sb_corevendor(sb_t *sbh);
++extern uint sb_corerev(sb_t *sbh);
++extern void *sb_osh(sb_t *sbh);
++extern void sb_setosh(sb_t *sbh, osl_t *osh);
++extern void *sb_coreregs(sb_t *sbh);
++extern uint32 sb_coreflags(sb_t *sbh, uint32 mask, uint32 val);
++extern uint32 sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val);
++extern bool sb_iscoreup(sb_t *sbh);
++extern void *sb_setcoreidx(sb_t *sbh, uint coreidx);
++extern void *sb_setcore(sb_t *sbh, uint coreid, uint coreunit);
++extern int sb_corebist(sb_t *sbh);
++extern void sb_commit(sb_t *sbh);
++extern uint32 sb_base(uint32 admatch);
++extern uint32 sb_size(uint32 admatch);
++extern void sb_core_reset(sb_t *sbh, uint32 bits, uint32 resetbits);
++extern void sb_core_tofixup(sb_t *sbh);
++extern void sb_core_disable(sb_t *sbh, uint32 bits);
++extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m);
++extern uint32 sb_clock(sb_t *sbh);
++extern void sb_pci_setup(sb_t *sbh, uint coremask);
++extern void sb_pcmcia_init(sb_t *sbh);
++extern void sb_watchdog(sb_t *sbh, uint ticks);
++extern void *sb_gpiosetcore(sb_t *sbh);
++extern uint32 sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
++extern uint32 sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
++extern uint32 sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
++extern uint32 sb_gpioin(sb_t *sbh);
++extern uint32 sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
++extern uint32 sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
++extern uint32 sb_gpioled(sb_t *sbh, uint32 mask, uint32 val);
++extern uint32 sb_gpioreserve(sb_t *sbh, uint32 gpio_num, uint8 priority);
++extern uint32 sb_gpiorelease(sb_t *sbh, uint32 gpio_num, uint8 priority);
++
++extern void sb_clkctl_init(sb_t *sbh);
++extern uint16 sb_clkctl_fast_pwrup_delay(sb_t *sbh);
++extern bool sb_clkctl_clk(sb_t *sbh, uint mode);
++extern int sb_clkctl_xtal(sb_t *sbh, uint what, bool on);
++extern void sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn,
++ void *intrsenabled_fn, void *intr_arg);
++extern uint32 sb_set_initiator_to(sb_t *sbh, uint32 to);
++extern int sb_corepciid(sb_t *sbh, uint func, uint16 *pcivendor, uint16 *pcidevice,
++ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif,
++ uint8 *pciheader);
++extern uint sb_pcie_readreg(void *sbh, void* arg1, uint offset);
++extern uint sb_pcie_writereg(sb_t *sbh, void *arg1, uint offset, uint val);
++extern uint32 sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 val);
++extern bool sb_backplane64(sb_t *sbh);
++extern void sb_btcgpiowar(sb_t *sbh);
++
++
++
++
++extern bool sb_deviceremoved(sb_t *sbh);
++extern uint32 sb_socram_size(sb_t *sbh);
++
++/*
++* Build device path. Path size must be >= SB_DEVPATH_BUFSZ.
++* The returned path is NULL terminated and has trailing '/'.
++* Return 0 on success, nonzero otherwise.
++*/
++extern int sb_devpath(sb_t *sbh, char *path, int size);
++
++/* clkctl xtal what flags */
++#define XTAL 0x1 /* primary crystal oscillator (2050) */
++#define PLL 0x2 /* main chip pll */
++
++/* clkctl clk mode */
++#define CLK_FAST 0 /* force fast (pll) clock */
++#define CLK_DYNAMIC 2 /* enable dynamic clock control */
++
++
++/* GPIO usage priorities */
++#define GPIO_DRV_PRIORITY 0 /* Driver */
++#define GPIO_APP_PRIORITY 1 /* Application */
++
++/* device path */
++#define SB_DEVPATH_BUFSZ 16 /* min buffer size in bytes */
++
++#endif /* _sbutils_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/sflash.h linux.dev/arch/mips/bcm947xx/include/sflash.h
+--- linux.old/arch/mips/bcm947xx/include/sflash.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sflash.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,36 @@
++/*
++ * Broadcom SiliconBackplane chipcommon serial flash interface
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sflash.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $
++ */
++
++#ifndef _sflash_h_
++#define _sflash_h_
++
++#include <typedefs.h>
++#include <sbchipc.h>
++
++struct sflash {
++ uint blocksize; /* Block size */
++ uint numblocks; /* Number of blocks */
++ uint32 type; /* Type */
++ uint size; /* Total size in bytes */
++};
++
++/* Utility functions */
++extern int sflash_poll(chipcregs_t *cc, uint offset);
++extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf);
++extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf);
++extern int sflash_erase(chipcregs_t *cc, uint offset);
++extern int sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf);
++extern struct sflash * sflash_init(chipcregs_t *cc);
++
++#endif /* _sflash_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/trxhdr.h linux.dev/arch/mips/bcm947xx/include/trxhdr.h
+--- linux.old/arch/mips/bcm947xx/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/trxhdr.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,33 @@
++/*
++ * TRX image file header format.
++ *
++ * Copyright 2005, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ */
++
++#include <typedefs.h>
++
++#define TRX_MAGIC 0x30524448 /* "HDR0" */
++#define TRX_VERSION 1
++#define TRX_MAX_LEN 0x3A0000
++#define TRX_NO_HEADER 1 /* Do not write TRX header */
++#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */
++#define TRX_MAX_OFFSET 3
++
++struct trx_header {
++ uint32 magic; /* "HDR0" */
++ uint32 len; /* Length of file including header */
++ uint32 crc32; /* 32-bit CRC from flag_version to end of file */
++ uint32 flag_version; /* 0:15 flags, 16:31 version */
++ uint32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */
++};
++
++/* Compatibility */
++typedef struct trx_header TRXHDR, *PTRXHDR;
+diff -urN linux.old/arch/mips/bcm947xx/include/typedefs.h linux.dev/arch/mips/bcm947xx/include/typedefs.h
+--- linux.old/arch/mips/bcm947xx/include/typedefs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/typedefs.h 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,361 @@
++/*
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id: typedefs.h,v 1.1.1.12 2006/04/08 06:13:40 honor Exp $
++ */
++
++#ifndef _TYPEDEFS_H_
++#define _TYPEDEFS_H_
++
++
++/* Define 'SITE_TYPEDEFS' in the compile to include a site specific
++ * typedef file "site_typedefs.h".
++ *
++ * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs"
++ * section of this file makes inferences about the compile environment
++ * based on defined symbols and possibly compiler pragmas.
++ *
++ * Following these two sections is the "Default Typedefs"
++ * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is
++ * defined. This section has a default set of typedefs and a few
++ * proprocessor symbols (TRUE, FALSE, NULL, ...).
++ */
++
++#ifdef SITE_TYPEDEFS
++
++/*
++ * Site Specific Typedefs
++ *
++ */
++
++#include "site_typedefs.h"
++
++#else
++
++/*
++ * Inferred Typedefs
++ *
++ */
++
++/* Infer the compile environment based on preprocessor symbols and pramas.
++ * Override type definitions as needed, and include configuration dependent
++ * header files to define types.
++ */
++
++#ifdef __cplusplus
++
++#define TYPEDEF_BOOL
++#ifndef FALSE
++#define FALSE false
++#endif
++#ifndef TRUE
++#define TRUE true
++#endif
++
++#else /* ! __cplusplus */
++
++#if defined(_WIN32)
++
++#define TYPEDEF_BOOL
++typedef unsigned char bool; /* consistent w/BOOL */
++
++#endif /* _WIN32 */
++
++#endif /* ! __cplusplus */
++
++/* use the Windows ULONG_PTR type when compiling for 64 bit */
++#if defined(_WIN64)
++#include <basetsd.h>
++#define TYPEDEF_UINTPTR
++typedef ULONG_PTR uintptr;
++#endif
++
++
++#if defined(_MINOSL_)
++#define _NEED_SIZE_T_
++#endif
++
++#if defined(_NEED_SIZE_T_)
++typedef long unsigned int size_t;
++#endif
++
++#ifdef __DJGPP__
++typedef long unsigned int size_t;
++#endif /* __DJGPP__ */
++
++#ifdef _MSC_VER /* Microsoft C */
++#define TYPEDEF_INT64
++#define TYPEDEF_UINT64
++typedef signed __int64 int64;
++typedef unsigned __int64 uint64;
++#endif
++
++#if defined(MACOSX)
++#define TYPEDEF_BOOL
++#endif
++
++#if defined(__NetBSD__)
++#define TYPEDEF_ULONG
++#endif
++
++
++#if defined(linux)
++#define TYPEDEF_UINT
++#define TYPEDEF_USHORT
++#define TYPEDEF_ULONG
++#endif
++
++#if !defined(linux) && !defined(_WIN32) && !defined(_CFE_) && \
++ !defined(_HNDRTE_) && !defined(_MINOSL_) && !defined(__DJGPP__)
++#define TYPEDEF_UINT
++#define TYPEDEF_USHORT
++#endif
++
++
++/* Do not support the (u)int64 types with strict ansi for GNU C */
++#if defined(__GNUC__) && defined(__STRICT_ANSI__)
++#define TYPEDEF_INT64
++#define TYPEDEF_UINT64
++#endif
++
++/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode
++ * for singned or unsigned
++ */
++#if defined(__ICL)
++
++#define TYPEDEF_INT64
++
++#if defined(__STDC__)
++#define TYPEDEF_UINT64
++#endif
++
++#endif /* __ICL */
++
++#if !defined(_WIN32) && !defined(_CFE_) && !defined(_MINOSL_) && \
++ !defined(__DJGPP__)
++
++/* pick up ushort & uint from standard types.h */
++#if defined(linux) && defined(__KERNEL__)
++
++#include <linux/types.h> /* sys/types.h and linux/types.h are oil and water */
++
++#else
++
++#include <sys/types.h>
++
++#endif
++
++#endif /* !_WIN32 && !PMON && !_CFE_ && !_HNDRTE_ && !_MINOSL_ && !__DJGPP__ */
++
++#if defined(MACOSX)
++
++#ifdef __BIG_ENDIAN__
++#define IL_BIGENDIAN
++#else
++#ifdef IL_BIGENDIAN
++#error "IL_BIGENDIAN was defined for a little-endian compile"
++#endif
++#endif /* __BIG_ENDIAN__ */
++
++#if !defined(__cplusplus)
++
++#if defined(__i386__)
++typedef unsigned char bool;
++#else
++typedef unsigned int bool;
++#endif
++#define TYPE_BOOL 1
++enum {
++ false = 0,
++ true = 1
++};
++
++#if defined(KERNEL)
++#include <IOKit/IOTypes.h>
++#endif /* KERNEL */
++
++#endif /* __cplusplus */
++
++#endif /* MACOSX */
++
++
++/* use the default typedefs in the next section of this file */
++#define USE_TYPEDEF_DEFAULTS
++
++#endif /* SITE_TYPEDEFS */
++
++
++/*
++ * Default Typedefs
++ *
++ */
++
++#ifdef USE_TYPEDEF_DEFAULTS
++#undef USE_TYPEDEF_DEFAULTS
++
++#ifndef TYPEDEF_BOOL
++typedef /* @abstract@ */ unsigned char bool;
++#endif
++
++/* define uchar, ushort, uint, ulong */
++
++#ifndef TYPEDEF_UCHAR
++typedef unsigned char uchar;
++#endif
++
++#ifndef TYPEDEF_USHORT
++typedef unsigned short ushort;
++#endif
++
++#ifndef TYPEDEF_UINT
++typedef unsigned int uint;
++#endif
++
++#ifndef TYPEDEF_ULONG
++typedef unsigned long ulong;
++#endif
++
++/* define [u]int8/16/32/64, uintptr */
++
++#ifndef TYPEDEF_UINT8
++typedef unsigned char uint8;
++#endif
++
++#ifndef TYPEDEF_UINT16
++typedef unsigned short uint16;
++#endif
++
++#ifndef TYPEDEF_UINT32
++typedef unsigned int uint32;
++#endif
++
++#ifndef TYPEDEF_UINT64
++typedef unsigned long long uint64;
++#endif
++
++#ifndef TYPEDEF_UINTPTR
++typedef unsigned int uintptr;
++#endif
++
++#ifndef TYPEDEF_INT8
++typedef signed char int8;
++#endif
++
++#ifndef TYPEDEF_INT16
++typedef signed short int16;
++#endif
++
++#ifndef TYPEDEF_INT32
++typedef signed int int32;
++#endif
++
++#ifndef TYPEDEF_INT64
++typedef signed long long int64;
++#endif
++
++/* define float32/64, float_t */
++
++#ifndef TYPEDEF_FLOAT32
++typedef float float32;
++#endif
++
++#ifndef TYPEDEF_FLOAT64
++typedef double float64;
++#endif
++
++/*
++ * abstracted floating point type allows for compile time selection of
++ * single or double precision arithmetic. Compiling with -DFLOAT32
++ * selects single precision; the default is double precision.
++ */
++
++#ifndef TYPEDEF_FLOAT_T
++
++#if defined(FLOAT32)
++typedef float32 float_t;
++#else /* default to double precision floating point */
++typedef float64 float_t;
++#endif
++
++#endif /* TYPEDEF_FLOAT_T */
++
++/* define macro values */
++
++#ifndef FALSE
++#define FALSE 0
++#endif
++
++#ifndef TRUE
++#define TRUE 1 /* TRUE */
++#endif
++
++#ifndef NULL
++#define NULL 0
++#endif
++
++#ifndef OFF
++#define OFF 0
++#endif
++
++#ifndef ON
++#define ON 1 /* ON = 1 */
++#endif
++
++#define AUTO (-1) /* Auto = -1 */
++
++/* define PTRSZ, INLINE */
++
++#ifndef PTRSZ
++#define PTRSZ sizeof(char*)
++#endif
++
++#ifndef INLINE
++
++#ifdef _MSC_VER
++
++#define INLINE __inline
++
++#elif __GNUC__
++
++#define INLINE __inline__
++
++#else
++
++#define INLINE
++
++#endif /* _MSC_VER */
++
++#endif /* INLINE */
++
++#undef TYPEDEF_BOOL
++#undef TYPEDEF_UCHAR
++#undef TYPEDEF_USHORT
++#undef TYPEDEF_UINT
++#undef TYPEDEF_ULONG
++#undef TYPEDEF_UINT8
++#undef TYPEDEF_UINT16
++#undef TYPEDEF_UINT32
++#undef TYPEDEF_UINT64
++#undef TYPEDEF_UINTPTR
++#undef TYPEDEF_INT8
++#undef TYPEDEF_INT16
++#undef TYPEDEF_INT32
++#undef TYPEDEF_INT64
++#undef TYPEDEF_FLOAT32
++#undef TYPEDEF_FLOAT64
++#undef TYPEDEF_FLOAT_T
++
++#endif /* USE_TYPEDEF_DEFAULTS */
++
++/*
++ * Including the bcmdefs.h here, to make sure everyone including typedefs.h
++ * gets this automatically
++*/
++#include "bcmdefs.h"
++
++#endif /* _TYPEDEFS_H_ */
+diff -urN linux.old/arch/mips/bcm947xx/Makefile linux.dev/arch/mips/bcm947xx/Makefile
+--- linux.old/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/Makefile 2006-10-02 21:26:08.000000000 +0200
+@@ -0,0 +1,17 @@
++#
++# Makefile for the BCM947xx specific kernel interface routines
++# under Linux.
++#
++
++EXTRA_CFLAGS+=-I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER -fno-delayed-branch
++
++O_TARGET := bcm947xx.o
++
++export-objs := export.o
++obj-y := prom.o setup.o time.o sbmips.o gpio.o
++obj-y += nvram.o nvram_linux.o sflash.o cfe_env.o
++obj-y += sbutils.o bcmutils.o bcmsrom.o hndchipc.o
++obj-$(CONFIG_PCI) += sbpci.o pcibios.o
++obj-y += export.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/arch/mips/bcm947xx/nvram.c linux.dev/arch/mips/bcm947xx/nvram.c
+--- linux.old/arch/mips/bcm947xx/nvram.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/nvram.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,315 @@
++/*
++ * NVRAM variable manipulation (common)
++ *
++ * Copyright 2004, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ */
++
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmendian.h>
++#include <bcmnvram.h>
++#include <bcmutils.h>
++#include <sbsdram.h>
++
++extern struct nvram_tuple * BCMINIT(_nvram_realloc)(struct nvram_tuple *t, const char *name, const char *value);
++extern void BCMINIT(_nvram_free)(struct nvram_tuple *t);
++extern int BCMINIT(_nvram_read)(void *buf);
++
++char * BCMINIT(_nvram_get)(const char *name);
++int BCMINIT(_nvram_set)(const char *name, const char *value);
++int BCMINIT(_nvram_unset)(const char *name);
++int BCMINIT(_nvram_getall)(char *buf, int count);
++int BCMINIT(_nvram_commit)(struct nvram_header *header);
++int BCMINIT(_nvram_init)(void);
++void BCMINIT(_nvram_exit)(void);
++
++static struct nvram_tuple * BCMINITDATA(nvram_hash)[257];
++static struct nvram_tuple * nvram_dead;
++
++/* Free all tuples. Should be locked. */
++static void
++BCMINITFN(nvram_free)(void)
++{
++ uint i;
++ struct nvram_tuple *t, *next;
++
++ /* Free hash table */
++ for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) {
++ for (t = BCMINIT(nvram_hash)[i]; t; t = next) {
++ next = t->next;
++ BCMINIT(_nvram_free)(t);
++ }
++ BCMINIT(nvram_hash)[i] = NULL;
++ }
++
++ /* Free dead table */
++ for (t = nvram_dead; t; t = next) {
++ next = t->next;
++ BCMINIT(_nvram_free)(t);
++ }
++ nvram_dead = NULL;
++
++ /* Indicate to per-port code that all tuples have been freed */
++ BCMINIT(_nvram_free)(NULL);
++}
++
++/* String hash */
++static INLINE uint
++hash(const char *s)
++{
++ uint hash = 0;
++
++ while (*s)
++ hash = 31 * hash + *s++;
++
++ return hash;
++}
++
++/* (Re)initialize the hash table. Should be locked. */
++static int
++BCMINITFN(nvram_rehash)(struct nvram_header *header)
++{
++ char buf[] = "0xXXXXXXXX", *name, *value, *end, *eq;
++
++ /* (Re)initialize hash table */
++ BCMINIT(nvram_free)();
++
++ /* Parse and set "name=value\0 ... \0\0" */
++ name = (char *) &header[1];
++ end = (char *) header + NVRAM_SPACE - 2;
++ end[0] = end[1] = '\0';
++ for (; *name; name = value + strlen(value) + 1) {
++ if (!(eq = strchr(name, '=')))
++ break;
++ *eq = '\0';
++ value = eq + 1;
++ BCMINIT(_nvram_set)(name, value);
++ *eq = '=';
++ }
++
++ /* Set special SDRAM parameters */
++ if (!BCMINIT(_nvram_get)("sdram_init")) {
++ sprintf(buf, "0x%04X", (uint16)(header->crc_ver_init >> 16));
++ BCMINIT(_nvram_set)("sdram_init", buf);
++ }
++ if (!BCMINIT(_nvram_get)("sdram_config")) {
++ sprintf(buf, "0x%04X", (uint16)(header->config_refresh & 0xffff));
++ BCMINIT(_nvram_set)("sdram_config", buf);
++ }
++ if (!BCMINIT(_nvram_get)("sdram_refresh")) {
++ sprintf(buf, "0x%04X", (uint16)((header->config_refresh >> 16) & 0xffff));
++ BCMINIT(_nvram_set)("sdram_refresh", buf);
++ }
++ if (!BCMINIT(_nvram_get)("sdram_ncdl")) {
++ sprintf(buf, "0x%08X", header->config_ncdl);
++ BCMINIT(_nvram_set)("sdram_ncdl", buf);
++ }
++
++ return 0;
++}
++
++/* Get the value of an NVRAM variable. Should be locked. */
++char *
++BCMINITFN(_nvram_get)(const char *name)
++{
++ uint i;
++ struct nvram_tuple *t;
++ char *value;
++
++ if (!name)
++ return NULL;
++
++ /* Hash the name */
++ i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash));
++
++ /* Find the associated tuple in the hash table */
++ for (t = BCMINIT(nvram_hash)[i]; t && strcmp(t->name, name); t = t->next);
++
++ value = t ? t->value : NULL;
++
++ return value;
++}
++
++/* Get the value of an NVRAM variable. Should be locked. */
++int
++BCMINITFN(_nvram_set)(const char *name, const char *value)
++{
++ uint i;
++ struct nvram_tuple *t, *u, **prev;
++
++ /* Hash the name */
++ i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash));
++
++ /* Find the associated tuple in the hash table */
++ for (prev = &BCMINIT(nvram_hash)[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev);
++
++ /* (Re)allocate tuple */
++ if (!(u = BCMINIT(_nvram_realloc)(t, name, value)))
++ return -12; /* -ENOMEM */
++
++ /* Value reallocated */
++ if (t && t == u)
++ return 0;
++
++ /* Move old tuple to the dead table */
++ if (t) {
++ *prev = t->next;
++ t->next = nvram_dead;
++ nvram_dead = t;
++ }
++
++ /* Add new tuple to the hash table */
++ u->next = BCMINIT(nvram_hash)[i];
++ BCMINIT(nvram_hash)[i] = u;
++
++ return 0;
++}
++
++/* Unset the value of an NVRAM variable. Should be locked. */
++int
++BCMINITFN(_nvram_unset)(const char *name)
++{
++ uint i;
++ struct nvram_tuple *t, **prev;
++
++ if (!name)
++ return 0;
++
++ /* Hash the name */
++ i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash));
++
++ /* Find the associated tuple in the hash table */
++ for (prev = &BCMINIT(nvram_hash)[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev);
++
++ /* Move it to the dead table */
++ if (t) {
++ *prev = t->next;
++ t->next = nvram_dead;
++ nvram_dead = t;
++ }
++
++ return 0;
++}
++
++/* Get all NVRAM variables. Should be locked. */
++int
++BCMINITFN(_nvram_getall)(char *buf, int count)
++{
++ uint i;
++ struct nvram_tuple *t;
++ int len = 0;
++
++ bzero(buf, count);
++
++ /* Write name=value\0 ... \0\0 */
++ for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) {
++ for (t = BCMINIT(nvram_hash)[i]; t; t = t->next) {
++ if ((count - len) > (strlen(t->name) + 1 + strlen(t->value) + 1))
++ len += sprintf(buf + len, "%s=%s", t->name, t->value) + 1;
++ else
++ break;
++ }
++ }
++
++ return 0;
++}
++
++/* Regenerate NVRAM. Should be locked. */
++int
++BCMINITFN(_nvram_commit)(struct nvram_header *header)
++{
++ char *init, *config, *refresh, *ncdl;
++ char *ptr, *end;
++ int i;
++ struct nvram_tuple *t;
++ struct nvram_header tmp;
++ uint8 crc;
++
++ /* Regenerate header */
++ header->magic = NVRAM_MAGIC;
++ header->crc_ver_init = (NVRAM_VERSION << 8);
++ if (!(init = BCMINIT(_nvram_get)("sdram_init")) ||
++ !(config = BCMINIT(_nvram_get)("sdram_config")) ||
++ !(refresh = BCMINIT(_nvram_get)("sdram_refresh")) ||
++ !(ncdl = BCMINIT(_nvram_get)("sdram_ncdl"))) {
++ header->crc_ver_init |= SDRAM_INIT << 16;
++ header->config_refresh = SDRAM_CONFIG;
++ header->config_refresh |= SDRAM_REFRESH << 16;
++ header->config_ncdl = 0;
++ } else {
++ header->crc_ver_init |= (bcm_strtoul(init, NULL, 0) & 0xffff) << 16;
++ header->config_refresh = bcm_strtoul(config, NULL, 0) & 0xffff;
++ header->config_refresh |= (bcm_strtoul(refresh, NULL, 0) & 0xffff) << 16;
++ header->config_ncdl = bcm_strtoul(ncdl, NULL, 0);
++ }
++
++ /* Clear data area */
++ ptr = (char *) header + sizeof(struct nvram_header);
++ bzero(ptr, NVRAM_SPACE - sizeof(struct nvram_header));
++
++ /* Leave space for a double NUL at the end */
++ end = (char *) header + NVRAM_SPACE - 2;
++
++ /* Write out all tuples */
++ for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) {
++ for (t = BCMINIT(nvram_hash)[i]; t; t = t->next) {
++ if ((ptr + strlen(t->name) + 1 + strlen(t->value) + 1) > end)
++ break;
++ ptr += sprintf(ptr, "%s=%s", t->name, t->value) + 1;
++ }
++ }
++
++ /* End with a double NUL */
++ ptr += 2;
++
++ /* Set new length */
++ header->len = ROUNDUP(ptr - (char *) header, 4);
++
++ /* Little-endian CRC8 over the last 11 bytes of the header */
++ tmp.crc_ver_init = htol32(header->crc_ver_init);
++ tmp.config_refresh = htol32(header->config_refresh);
++ tmp.config_ncdl = htol32(header->config_ncdl);
++ crc = hndcrc8((char *) &tmp + 9, sizeof(struct nvram_header) - 9, CRC8_INIT_VALUE);
++
++ /* Continue CRC8 over data bytes */
++ crc = hndcrc8((char *) &header[1], header->len - sizeof(struct nvram_header), crc);
++
++ /* Set new CRC8 */
++ header->crc_ver_init |= crc;
++
++ /* Reinitialize hash table */
++ return BCMINIT(nvram_rehash)(header);
++}
++
++/* Initialize hash table. Should be locked. */
++int
++BCMINITFN(_nvram_init)(void)
++{
++ struct nvram_header *header;
++ int ret;
++
++ if (!(header = (struct nvram_header *) kmalloc(NVRAM_SPACE, GFP_ATOMIC))) {
++ return -12; /* -ENOMEM */
++ }
++
++ if ((ret = BCMINIT(_nvram_read)(header)) == 0 &&
++ header->magic == NVRAM_MAGIC)
++ BCMINIT(nvram_rehash)(header);
++
++ kfree(header);
++ return ret;
++}
++
++/* Free hash table. Should be locked. */
++void
++BCMINITFN(_nvram_exit)(void)
++{
++ BCMINIT(nvram_free)();
++}
+diff -urN linux.old/arch/mips/bcm947xx/nvram_linux.c linux.dev/arch/mips/bcm947xx/nvram_linux.c
+--- linux.old/arch/mips/bcm947xx/nvram_linux.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/nvram_linux.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,723 @@
++/*
++ * NVRAM variable manipulation (Linux kernel half)
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: nvram_linux.c,v 1.19 2006/04/08 07:12:42 honor Exp $
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/interrupt.h>
++#include <linux/spinlock.h>
++#include <linux/slab.h>
++#include <linux/bootmem.h>
++#include <linux/wrapper.h>
++#include <linux/fs.h>
++#include <linux/miscdevice.h>
++#include <linux/mtd/mtd.h>
++#include <asm/addrspace.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmendian.h>
++#include <bcmnvram.h>
++#include <bcmutils.h>
++#include <sbconfig.h>
++#include <sbchipc.h>
++#include <sbutils.h>
++#include <hndmips.h>
++#include <sflash.h>
++
++/* In BSS to minimize text size and page aligned so it can be mmap()-ed */
++static char nvram_buf[NVRAM_SPACE] __attribute__((aligned(PAGE_SIZE)));
++
++#ifdef MODULE
++
++#define early_nvram_get(name) nvram_get(name)
++
++#else /* !MODULE */
++
++/* Global SB handle */
++extern void *bcm947xx_sbh;
++extern spinlock_t bcm947xx_sbh_lock;
++
++static int cfe_env;
++extern char *cfe_env_get(char *nv_buf, const char *name);
++
++/* Convenience */
++#define sbh bcm947xx_sbh
++#define sbh_lock bcm947xx_sbh_lock
++#define KB * 1024
++#define MB * 1024 * 1024
++
++/* Probe for NVRAM header */
++static void __init
++early_nvram_init(void)
++{
++ struct nvram_header *header;
++ chipcregs_t *cc;
++ struct sflash *info = NULL;
++ int i;
++ uint32 base, off, lim;
++ u32 *src, *dst;
++
++ if ((cc = sb_setcore(sbh, SB_CC, 0)) != NULL) {
++ base = KSEG1ADDR(SB_FLASH2);
++ switch (readl(&cc->capabilities) & CAP_FLASH_MASK) {
++ case PFLASH:
++ lim = SB_FLASH2_SZ;
++ break;
++
++ case SFLASH_ST:
++ case SFLASH_AT:
++ if ((info = sflash_init(cc)) == NULL)
++ return;
++ lim = info->size;
++ break;
++
++ case FLASH_NONE:
++ default:
++ return;
++ }
++ } else {
++ /* extif assumed, Stop at 4 MB */
++ base = KSEG1ADDR(SB_FLASH1);
++ lim = SB_FLASH1_SZ;
++ }
++
++ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
++ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
++ dst = (u32 *) nvram_buf;
++ if ((lim == 0x02000000) && ((*src & 0xff00ff) == 0x000001)) {
++ printk("early_nvram_init: WGT634U NVRAM found.\n");
++
++ for (i = 0; i < 0x1ff0; i++) {
++ if (*src == 0xFFFFFFFF)
++ break;
++ *dst++ = *src++;
++ }
++ cfe_env = 1;
++ return;
++ }
++
++ off = FLASH_MIN;
++ while (off <= lim) {
++ /* Windowed flash access */
++ header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE);
++ if (header->magic == NVRAM_MAGIC)
++ goto found;
++ off <<= 1;
++ }
++
++ /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
++ header = (struct nvram_header *) KSEG1ADDR(base + 4 KB);
++ if (header->magic == NVRAM_MAGIC)
++ goto found;
++
++ header = (struct nvram_header *) KSEG1ADDR(base + 1 KB);
++ if (header->magic == NVRAM_MAGIC)
++ goto found;
++
++ printk("early_nvram_init: NVRAM not found\n");
++ return;
++
++found:
++ src = (u32 *) header;
++ dst = (u32 *) nvram_buf;
++ for (i = 0; i < sizeof(struct nvram_header); i += 4)
++ *dst++ = *src++;
++ for (; i < header->len && i < NVRAM_SPACE; i += 4)
++ *dst++ = ltoh32(*src++);
++}
++
++/* Early (before mm or mtd) read-only access to NVRAM */
++static char * __init
++early_nvram_get(const char *name)
++{
++ char *var, *value, *end, *eq;
++
++ if (!name)
++ return NULL;
++
++ /* Too early? */
++ if (sbh == NULL)
++ return NULL;
++
++ if (!nvram_buf[0])
++ early_nvram_init();
++
++ if (cfe_env)
++ return cfe_env_get(nvram_buf, name);
++
++ /* Look for name=value and return value */
++ var = &nvram_buf[sizeof(struct nvram_header)];
++ end = nvram_buf + sizeof(nvram_buf) - 2;
++ end[0] = end[1] = '\0';
++ for (; *var; var = value + strlen(value) + 1) {
++ if (!(eq = strchr(var, '=')))
++ break;
++ value = eq + 1;
++ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
++ return value;
++ }
++
++ return NULL;
++}
++
++static int __init
++early_nvram_getall(char *buf, int count)
++{
++ char *var, *end;
++ int len = 0;
++
++ /* Too early? */
++ if (sbh == NULL)
++ return -1;
++
++ if (!nvram_buf[0])
++ early_nvram_init();
++
++ bzero(buf, count);
++
++ /* Write name=value\0 ... \0\0 */
++ var = &nvram_buf[sizeof(struct nvram_header)];
++ end = nvram_buf + sizeof(nvram_buf) - 2;
++ end[0] = end[1] = '\0';
++ for (; *var; var += strlen(var) + 1) {
++ if ((count - len) <= (strlen(var) + 1))
++ break;
++ len += sprintf(buf + len, "%s", var) + 1;
++ }
++
++ return 0;
++}
++#endif /* !MODULE */
++
++extern char * _nvram_get(const char *name);
++extern int _nvram_set(const char *name, const char *value);
++extern int _nvram_unset(const char *name);
++extern int _nvram_getall(char *buf, int count);
++extern int _nvram_commit(struct nvram_header *header);
++extern int _nvram_init(void *sbh);
++extern void _nvram_exit(void);
++
++/* Globals */
++static spinlock_t nvram_lock = SPIN_LOCK_UNLOCKED;
++static struct semaphore nvram_sem;
++static unsigned long nvram_offset = 0;
++static int nvram_major = -1;
++static devfs_handle_t nvram_handle = NULL;
++static struct mtd_info *nvram_mtd = NULL;
++
++int
++_nvram_read(char *buf)
++{
++ struct nvram_header *header = (struct nvram_header *) buf;
++ size_t len;
++
++ if (!nvram_mtd ||
++ MTD_READ(nvram_mtd, nvram_mtd->size - NVRAM_SPACE, NVRAM_SPACE, &len, buf) ||
++ len != NVRAM_SPACE ||
++ header->magic != NVRAM_MAGIC) {
++ /* Maybe we can recover some data from early initialization */
++ memcpy(buf, nvram_buf, NVRAM_SPACE);
++ }
++
++ return 0;
++}
++
++struct nvram_tuple *
++_nvram_realloc(struct nvram_tuple *t, const char *name, const char *value)
++{
++ if ((nvram_offset + strlen(value) + 1) > NVRAM_SPACE)
++ return NULL;
++
++ if (!t) {
++ if (!(t = kmalloc(sizeof(struct nvram_tuple) + strlen(name) + 1, GFP_ATOMIC)))
++ return NULL;
++
++ /* Copy name */
++ t->name = (char *) &t[1];
++ strcpy(t->name, name);
++
++ t->value = NULL;
++ }
++
++ /* Copy value */
++ if (!t->value || strcmp(t->value, value)) {
++ t->value = &nvram_buf[nvram_offset];
++ strcpy(t->value, value);
++ nvram_offset += strlen(value) + 1;
++ }
++
++ return t;
++}
++
++void
++_nvram_free(struct nvram_tuple *t)
++{
++ if (!t)
++ nvram_offset = 0;
++ else
++ kfree(t);
++}
++
++int
++nvram_set(const char *name, const char *value)
++{
++ unsigned long flags;
++ int ret;
++ struct nvram_header *header;
++
++ spin_lock_irqsave(&nvram_lock, flags);
++ if ((ret = _nvram_set(name, value))) {
++ /* Consolidate space and try again */
++ if ((header = kmalloc(NVRAM_SPACE, GFP_ATOMIC))) {
++ if (_nvram_commit(header) == 0)
++ ret = _nvram_set(name, value);
++ kfree(header);
++ }
++ }
++ spin_unlock_irqrestore(&nvram_lock, flags);
++
++ return ret;
++}
++
++char *
++real_nvram_get(const char *name)
++{
++ unsigned long flags;
++ char *value;
++
++ spin_lock_irqsave(&nvram_lock, flags);
++ value = _nvram_get(name);
++ spin_unlock_irqrestore(&nvram_lock, flags);
++
++ return value;
++}
++
++char *
++nvram_get(const char *name)
++{
++ if (nvram_major >= 0)
++ return real_nvram_get(name);
++ else
++ return early_nvram_get(name);
++}
++
++int
++nvram_unset(const char *name)
++{
++ unsigned long flags;
++ int ret;
++
++ spin_lock_irqsave(&nvram_lock, flags);
++ ret = _nvram_unset(name);
++ spin_unlock_irqrestore(&nvram_lock, flags);
++
++ return ret;
++}
++
++static void
++erase_callback(struct erase_info *done)
++{
++ wait_queue_head_t *wait_q = (wait_queue_head_t *) done->priv;
++ wake_up(wait_q);
++}
++
++int
++nvram_commit(void)
++{
++ char *buf;
++ size_t erasesize, len, magic_len;
++ unsigned int i;
++ int ret;
++ struct nvram_header *header;
++ unsigned long flags;
++ u_int32_t offset;
++ DECLARE_WAITQUEUE(wait, current);
++ wait_queue_head_t wait_q;
++ struct erase_info erase;
++ u_int32_t magic_offset = 0; /* Offset for writing MAGIC # */
++
++ if (!nvram_mtd) {
++ printk("nvram_commit: NVRAM not found\n");
++ return -ENODEV;
++ }
++
++ if (in_interrupt()) {
++ printk("nvram_commit: not committing in interrupt\n");
++ return -EINVAL;
++ }
++
++ /* Backup sector blocks to be erased */
++ erasesize = ROUNDUP(NVRAM_SPACE, nvram_mtd->erasesize);
++ if (!(buf = kmalloc(erasesize, GFP_KERNEL))) {
++ printk("nvram_commit: out of memory\n");
++ return -ENOMEM;
++ }
++
++ down(&nvram_sem);
++
++ if ((i = erasesize - NVRAM_SPACE) > 0) {
++ offset = nvram_mtd->size - erasesize;
++ len = 0;
++ ret = MTD_READ(nvram_mtd, offset, i, &len, buf);
++ if (ret || len != i) {
++ printk("nvram_commit: read error ret = %d, len = %d/%d\n", ret, len, i);
++ ret = -EIO;
++ goto done;
++ }
++ header = (struct nvram_header *)(buf + i);
++ magic_offset = i + ((void *)&header->magic - (void *)header);
++ } else {
++ offset = nvram_mtd->size - NVRAM_SPACE;
++ magic_offset = ((void *)&header->magic - (void *)header);
++ header = (struct nvram_header *)buf;
++ }
++
++ /* clear the existing magic # to mark the NVRAM as unusable
++ we can pull MAGIC bits low without erase */
++ header->magic = NVRAM_CLEAR_MAGIC; /* All zeros magic */
++
++ /* Unlock sector blocks (for Intel 28F320C3B flash) , 20060309 */
++ if(nvram_mtd->unlock)
++ nvram_mtd->unlock(nvram_mtd, offset, nvram_mtd->erasesize);
++
++ ret = MTD_WRITE(nvram_mtd, offset + magic_offset, sizeof(header->magic),
++ &magic_len, (char *)&header->magic);
++ if (ret || magic_len != sizeof(header->magic)) {
++ printk("nvram_commit: clear MAGIC error\n");
++ ret = -EIO;
++ goto done;
++ }
++
++ header->magic = NVRAM_MAGIC; /* reset MAGIC before we regenerate the NVRAM,
++ otherwise we'll have an incorrect CRC */
++ /* Regenerate NVRAM */
++ spin_lock_irqsave(&nvram_lock, flags);
++ ret = _nvram_commit(header);
++ spin_unlock_irqrestore(&nvram_lock, flags);
++ if (ret)
++ goto done;
++
++ /* Erase sector blocks */
++ init_waitqueue_head(&wait_q);
++ for (; offset < nvram_mtd->size - NVRAM_SPACE + header->len; offset += nvram_mtd->erasesize) {
++ erase.mtd = nvram_mtd;
++ erase.addr = offset;
++ erase.len = nvram_mtd->erasesize;
++ erase.callback = erase_callback;
++ erase.priv = (u_long) &wait_q;
++
++ set_current_state(TASK_INTERRUPTIBLE);
++ add_wait_queue(&wait_q, &wait);
++
++ /* Unlock sector blocks */
++ if (nvram_mtd->unlock)
++ nvram_mtd->unlock(nvram_mtd, offset, nvram_mtd->erasesize);
++
++ if ((ret = MTD_ERASE(nvram_mtd, &erase))) {
++ set_current_state(TASK_RUNNING);
++ remove_wait_queue(&wait_q, &wait);
++ printk("nvram_commit: erase error\n");
++ goto done;
++ }
++
++ /* Wait for erase to finish */
++ schedule();
++ remove_wait_queue(&wait_q, &wait);
++ }
++
++ /* Write partition up to end of data area */
++ header->magic = NVRAM_INVALID_MAGIC; /* All ones magic */
++ offset = nvram_mtd->size - erasesize;
++ i = erasesize - NVRAM_SPACE + header->len;
++ ret = MTD_WRITE(nvram_mtd, offset, i, &len, buf);
++ if (ret || len != i) {
++ printk("nvram_commit: write error\n");
++ ret = -EIO;
++ goto done;
++ }
++
++ /* Now mark the NVRAM in flash as "valid" by setting the correct
++ MAGIC # */
++ header->magic = NVRAM_MAGIC;
++ ret = MTD_WRITE(nvram_mtd, offset + magic_offset, sizeof(header->magic),
++ &magic_len, (char *)&header->magic);
++ if (ret || magic_len != sizeof(header->magic)) {
++ printk("nvram_commit: write MAGIC error\n");
++ ret = -EIO;
++ goto done;
++ }
++
++ /*
++ * Reading a few bytes back here will put the device
++ * back to the correct mode on certain flashes */
++ offset = nvram_mtd->size - erasesize;
++ ret = MTD_READ(nvram_mtd, offset, 4, &len, buf);
++
++ done:
++ up(&nvram_sem);
++ kfree(buf);
++
++ return ret;
++}
++
++int
++nvram_getall(char *buf, int count)
++{
++ unsigned long flags;
++ int ret;
++
++ spin_lock_irqsave(&nvram_lock, flags);
++ if (nvram_major >= 0)
++ ret = _nvram_getall(buf, count);
++ else
++ ret = early_nvram_getall(buf, count);
++ spin_unlock_irqrestore(&nvram_lock, flags);
++
++ return ret;
++}
++
++
++
++
++
++
++
++/* User mode interface below */
++
++static ssize_t
++dev_nvram_read(struct file *file, char *buf, size_t count, loff_t *ppos)
++{
++ char tmp[100], *name = tmp, *value;
++ ssize_t ret;
++ unsigned long off;
++
++ if (count > sizeof(tmp)) {
++ if (!(name = kmalloc(count, GFP_KERNEL)))
++ return -ENOMEM;
++ }
++
++ if (copy_from_user(name, buf, count)) {
++ ret = -EFAULT;
++ goto done;
++ }
++
++ if (*name == '\0') {
++ /* Get all variables */
++ ret = nvram_getall(name, count);
++ if (ret == 0) {
++ if (copy_to_user(buf, name, count)) {
++ ret = -EFAULT;
++ goto done;
++ }
++ ret = count;
++ }
++ } else {
++ if (!(value = nvram_get(name))) {
++ ret = 0;
++ goto done;
++ }
++
++ /* Provide the offset into mmap() space */
++ off = (unsigned long) value - (unsigned long) nvram_buf;
++
++ if (put_user(off, (unsigned long *) buf)) {
++ ret = -EFAULT;
++ goto done;
++ }
++
++ ret = sizeof(unsigned long);
++ }
++
++ flush_cache_all();
++
++done:
++ if (name != tmp)
++ kfree(name);
++
++ return ret;
++}
++
++static ssize_t
++dev_nvram_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
++{
++ char tmp[100], *name = tmp, *value;
++ ssize_t ret;
++
++ if (count > sizeof(tmp)) {
++ if (!(name = kmalloc(count, GFP_KERNEL)))
++ return -ENOMEM;
++ }
++
++ if (copy_from_user(name, buf, count)) {
++ ret = -EFAULT;
++ goto done;
++ }
++
++ value = name;
++ name = strsep(&value, "=");
++ if (value)
++ ret = nvram_set(name, value) ? : count;
++ else
++ ret = nvram_unset(name) ? : count;
++
++ done:
++ if (name != tmp)
++ kfree(name);
++
++ return ret;
++}
++
++static int
++dev_nvram_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
++{
++ if (cmd != NVRAM_MAGIC)
++ return -EINVAL;
++
++ return nvram_commit();
++}
++
++static int
++dev_nvram_mmap(struct file *file, struct vm_area_struct *vma)
++{
++ unsigned long offset = virt_to_phys(nvram_buf);
++
++ if (remap_page_range(vma->vm_start, offset, vma->vm_end-vma->vm_start,
++ vma->vm_page_prot))
++ return -EAGAIN;
++
++ return 0;
++}
++
++static int
++dev_nvram_open(struct inode *inode, struct file * file)
++{
++ MOD_INC_USE_COUNT;
++ return 0;
++}
++
++static int
++dev_nvram_release(struct inode *inode, struct file * file)
++{
++ MOD_DEC_USE_COUNT;
++ return 0;
++}
++
++static struct file_operations dev_nvram_fops = {
++ owner: THIS_MODULE,
++ open: dev_nvram_open,
++ release: dev_nvram_release,
++ read: dev_nvram_read,
++ write: dev_nvram_write,
++ ioctl: dev_nvram_ioctl,
++ mmap: dev_nvram_mmap,
++};
++
++static void
++dev_nvram_exit(void)
++{
++ int order = 0;
++ struct page *page, *end;
++
++ if (nvram_handle)
++ devfs_unregister(nvram_handle);
++
++ if (nvram_major >= 0)
++ devfs_unregister_chrdev(nvram_major, "nvram");
++
++ if (nvram_mtd)
++ put_mtd_device(nvram_mtd);
++
++ while ((PAGE_SIZE << order) < NVRAM_SPACE)
++ order++;
++ end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1);
++ for (page = virt_to_page(nvram_buf); page <= end; page++)
++ mem_map_unreserve(page);
++
++ _nvram_exit();
++}
++
++static int __init
++dev_nvram_init(void)
++{
++ int order = 0, ret = 0;
++ struct page *page, *end;
++ unsigned int i;
++
++ /* Allocate and reserve memory to mmap() */
++ while ((PAGE_SIZE << order) < NVRAM_SPACE)
++ order++;
++ end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1);
++ for (page = virt_to_page(nvram_buf); page <= end; page++)
++ mem_map_reserve(page);
++
++#ifdef CONFIG_MTD
++ /* Find associated MTD device */
++ for (i = 0; i < MAX_MTD_DEVICES; i++) {
++ nvram_mtd = get_mtd_device(NULL, i);
++ if (nvram_mtd) {
++ if (!strcmp(nvram_mtd->name, "nvram") &&
++ nvram_mtd->size >= NVRAM_SPACE)
++ break;
++ put_mtd_device(nvram_mtd);
++ }
++ }
++ if (i >= MAX_MTD_DEVICES)
++ nvram_mtd = NULL;
++#endif
++
++ /* Initialize hash table lock */
++ spin_lock_init(&nvram_lock);
++
++ /* Initialize commit semaphore */
++ init_MUTEX(&nvram_sem);
++
++ /* Register char device */
++ if ((nvram_major = devfs_register_chrdev(0, "nvram", &dev_nvram_fops)) < 0) {
++ ret = nvram_major;
++ goto err;
++ }
++
++ /* Initialize hash table */
++ _nvram_init(sbh);
++
++ /* Create /dev/nvram handle */
++ nvram_handle = devfs_register(NULL, "nvram", DEVFS_FL_NONE, nvram_major, 0,
++ S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP, &dev_nvram_fops, NULL);
++
++ /* Set the SDRAM NCDL value into NVRAM if not already done */
++ if (getintvar(NULL, "sdram_ncdl") == 0) {
++ unsigned int ncdl;
++ char buf[] = "0x00000000";
++
++ if ((ncdl = sb_memc_get_ncdl(sbh))) {
++ sprintf(buf, "0x%08x", ncdl);
++ nvram_set("sdram_ncdl", buf);
++ nvram_commit();
++ }
++ }
++
++ return 0;
++
++ err:
++ dev_nvram_exit();
++ return ret;
++}
++
++module_init(dev_nvram_init);
++module_exit(dev_nvram_exit);
+diff -urN linux.old/arch/mips/bcm947xx/pcibios.c linux.dev/arch/mips/bcm947xx/pcibios.c
+--- linux.old/arch/mips/bcm947xx/pcibios.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/pcibios.c 2006-10-02 21:22:56.000000000 +0200
+@@ -0,0 +1,380 @@
++/*
++ * Low-Level PCI and SB support for BCM47xx (Linux support code)
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: pcibios.c,v 1.1.1.9 2006/02/27 03:42:55 honor Exp $
++ */
++
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/paccess.h>
++
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <sbconfig.h>
++#include <sbutils.h>
++#include <hndpci.h>
++#include <pcicfg.h>
++#include <bcmdevs.h>
++#include <bcmnvram.h>
++
++/* Global SB handle */
++extern sb_t *bcm947xx_sbh;
++extern spinlock_t bcm947xx_sbh_lock;
++
++/* Convenience */
++#define sbh bcm947xx_sbh
++#define sbh_lock bcm947xx_sbh_lock
++
++static int
++sbpci_read_config_byte(struct pci_dev *dev, int where, u8 *value)
++{
++ unsigned long flags;
++ int ret;
++
++ spin_lock_irqsave(&sbh_lock, flags);
++ ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
++ PCI_FUNC(dev->devfn), where, value, sizeof(*value));
++ spin_unlock_irqrestore(&sbh_lock, flags);
++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
++}
++
++static int
++sbpci_read_config_word(struct pci_dev *dev, int where, u16 *value)
++{
++ unsigned long flags;
++ int ret;
++
++ spin_lock_irqsave(&sbh_lock, flags);
++ ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
++ PCI_FUNC(dev->devfn), where, value, sizeof(*value));
++ spin_unlock_irqrestore(&sbh_lock, flags);
++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
++}
++
++static int
++sbpci_read_config_dword(struct pci_dev *dev, int where, u32 *value)
++{
++ unsigned long flags;
++ int ret;
++
++ spin_lock_irqsave(&sbh_lock, flags);
++ ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
++ PCI_FUNC(dev->devfn), where, value, sizeof(*value));
++ spin_unlock_irqrestore(&sbh_lock, flags);
++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
++}
++
++static int
++sbpci_write_config_byte(struct pci_dev *dev, int where, u8 value)
++{
++ unsigned long flags;
++ int ret;
++
++ spin_lock_irqsave(&sbh_lock, flags);
++ ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
++ PCI_FUNC(dev->devfn), where, &value, sizeof(value));
++ spin_unlock_irqrestore(&sbh_lock, flags);
++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
++}
++
++static int
++sbpci_write_config_word(struct pci_dev *dev, int where, u16 value)
++{
++ unsigned long flags;
++ int ret;
++
++ spin_lock_irqsave(&sbh_lock, flags);
++ ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
++ PCI_FUNC(dev->devfn), where, &value, sizeof(value));
++ spin_unlock_irqrestore(&sbh_lock, flags);
++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
++}
++
++static int
++sbpci_write_config_dword(struct pci_dev *dev, int where, u32 value)
++{
++ unsigned long flags;
++ int ret;
++
++ spin_lock_irqsave(&sbh_lock, flags);
++ ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
++ PCI_FUNC(dev->devfn), where, &value, sizeof(value));
++ spin_unlock_irqrestore(&sbh_lock, flags);
++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
++}
++
++static struct pci_ops pcibios_ops = {
++ sbpci_read_config_byte,
++ sbpci_read_config_word,
++ sbpci_read_config_dword,
++ sbpci_write_config_byte,
++ sbpci_write_config_word,
++ sbpci_write_config_dword
++};
++
++
++void __init
++pcibios_init(void)
++{
++ ulong flags;
++
++ if (!(sbh = sb_kattach()))
++ panic("sb_kattach failed");
++ spin_lock_init(&sbh_lock);
++
++ spin_lock_irqsave(&sbh_lock, flags);
++ sbpci_init(sbh);
++ spin_unlock_irqrestore(&sbh_lock, flags);
++
++ set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000));
++
++ /* Scan the SB bus */
++ pci_scan_bus(0, &pcibios_ops, NULL);
++
++}
++
++char * __init
++pcibios_setup(char *str)
++{
++ if (!strncmp(str, "ban=", 4)) {
++ sbpci_ban(simple_strtoul(str + 4, NULL, 0));
++ return NULL;
++ }
++
++ return (str);
++}
++
++static u32 pci_iobase = 0x100;
++static u32 pci_membase = SB_PCI_DMA;
++
++void __init
++pcibios_fixup_bus(struct pci_bus *b)
++{
++ struct list_head *ln;
++ struct pci_dev *d;
++ struct resource *res;
++ int pos, size;
++ u32 *base;
++ u8 irq;
++
++ printk("PCI: Fixing up bus %d\n", b->number);
++
++ /* Fix up SB */
++ if (b->number == 0) {
++ for (ln = b->devices.next; ln != &b->devices; ln = ln->next) {
++ d = pci_dev_b(ln);
++ /* Fix up interrupt lines */
++ pci_read_config_byte(d, PCI_INTERRUPT_LINE, &irq);
++ d->irq = irq + 2;
++ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
++ }
++ }
++
++ /* Fix up external PCI */
++ else {
++ for (ln = b->devices.next; ln != &b->devices; ln = ln->next) {
++ d = pci_dev_b(ln);
++ /* Fix up resource bases */
++ for (pos = 0; pos < 6; pos++) {
++ res = &d->resource[pos];
++ base = (res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase;
++ if (res->end) {
++ size = res->end - res->start + 1;
++ if (*base & (size - 1))
++ *base = (*base + size) & ~(size - 1);
++ res->start = *base;
++ res->end = res->start + size - 1;
++ *base += size;
++ pci_write_config_dword(d,
++ PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
++ }
++ /* Fix up PCI bridge BAR0 only */
++ if (b->number == 1 && PCI_SLOT(d->devfn) == 0)
++ break;
++ }
++ /* Fix up interrupt lines */
++ if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))
++ d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq;
++ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
++ }
++ }
++}
++
++unsigned int
++pcibios_assign_all_busses(void)
++{
++ return 1;
++}
++
++void
++pcibios_align_resource(void *data, struct resource *res,
++ unsigned long size, unsigned long align)
++{
++}
++
++int
++pcibios_enable_resources(struct pci_dev *dev)
++{
++ u16 cmd, old_cmd;
++ int idx;
++ struct resource *r;
++
++ /* External PCI only */
++ if (dev->bus->number == 0)
++ return 0;
++
++ pci_read_config_word(dev, PCI_COMMAND, &cmd);
++ old_cmd = cmd;
++ for (idx = 0; idx < 6; idx++) {
++ r = &dev->resource[idx];
++ if (r->flags & IORESOURCE_IO)
++ cmd |= PCI_COMMAND_IO;
++ if (r->flags & IORESOURCE_MEM)
++ cmd |= PCI_COMMAND_MEMORY;
++ }
++ if (dev->resource[PCI_ROM_RESOURCE].start)
++ cmd |= PCI_COMMAND_MEMORY;
++ if (cmd != old_cmd) {
++ printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->slot_name, old_cmd, cmd);
++ pci_write_config_word(dev, PCI_COMMAND, cmd);
++ }
++ return 0;
++}
++
++int
++pcibios_enable_device(struct pci_dev *dev, int mask)
++{
++ ulong flags;
++ uint coreidx;
++ void *regs;
++
++ /* External PCI device enable */
++ if (dev->bus->number != 0)
++ return pcibios_enable_resources(dev);
++
++ /* These cores come out of reset enabled */
++ if (dev->device == SB_MIPS ||
++ dev->device == SB_MIPS33 ||
++ dev->device == SB_EXTIF ||
++ dev->device == SB_CC)
++ return 0;
++
++ spin_lock_irqsave(&sbh_lock, flags);
++ coreidx = sb_coreidx(sbh);
++ regs = sb_setcoreidx(sbh, PCI_SLOT(dev->devfn));
++ if (!regs)
++ return PCIBIOS_DEVICE_NOT_FOUND;
++
++ /*
++ * The USB core requires a special bit to be set during core
++ * reset to enable host (OHCI) mode. Resetting the SB core in
++ * pcibios_enable_device() is a hack for compatibility with
++ * vanilla usb-ohci so that it does not have to know about
++ * SB. A driver that wants to use the USB core in device mode
++ * should know about SB and should reset the bit back to 0
++ * after calling pcibios_enable_device().
++ */
++ if (sb_coreid(sbh) == SB_USB) {
++ sb_core_disable(sbh, sb_coreflags(sbh, 0, 0));
++ sb_core_reset(sbh, 1 << 29, 0);
++ }
++ /*
++ * USB 2.0 special considerations:
++ *
++ * 1. Since the core supports both OHCI and EHCI functions, it must
++ * only be reset once.
++ *
++ * 2. In addition to the standard SB reset sequence, the Host Control
++ * Register must be programmed to bring the USB core and various
++ * phy components out of reset.
++ */
++ else if (sb_coreid(sbh) == SB_USB20H) {
++ if (!sb_iscoreup(sbh)) {
++ sb_core_reset(sbh, 0, 0);
++ writel(0x7FF, (ulong)regs + 0x200);
++ udelay(1);
++ }
++ } else
++ sb_core_reset(sbh, 0, 0);
++
++ sb_setcoreidx(sbh, coreidx);
++ spin_unlock_irqrestore(&sbh_lock, flags);
++
++ return 0;
++}
++
++void
++pcibios_update_resource(struct pci_dev *dev, struct resource *root,
++ struct resource *res, int resource)
++{
++ unsigned long where, size;
++ u32 reg;
++
++ /* External PCI only */
++ if (dev->bus->number == 0)
++ return;
++
++ where = PCI_BASE_ADDRESS_0 + (resource * 4);
++ size = res->end - res->start;
++ pci_read_config_dword(dev, where, &reg);
++ reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);
++ pci_write_config_dword(dev, where, reg);
++}
++
++static void __init
++quirk_sbpci_bridge(struct pci_dev *dev)
++{
++ if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0)
++ return;
++
++ printk("PCI: Fixing up bridge\n");
++
++ /* Enable PCI bridge bus mastering and memory space */
++ pci_set_master(dev);
++ pcibios_enable_resources(dev);
++
++ /* Enable PCI bridge BAR1 prefetch and burst */
++ pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3);
++}
++
++struct pci_fixup pcibios_fixups[] = {
++ { PCI_FIXUP_HEADER, PCI_ANY_ID, PCI_ANY_ID, quirk_sbpci_bridge },
++ { 0 }
++};
++
++/*
++ * If we set up a device for bus mastering, we need to check the latency
++ * timer as certain crappy BIOSes forget to set it properly.
++ */
++unsigned int pcibios_max_latency = 255;
++
++void pcibios_set_master(struct pci_dev *dev)
++{
++ u8 lat;
++ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
++ if (lat < 16)
++ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
++ else if (lat > pcibios_max_latency)
++ lat = pcibios_max_latency;
++ else
++ return;
++ printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", dev->slot_name, lat);
++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
++}
++
+diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.c
+--- linux.old/arch/mips/bcm947xx/prom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/prom.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,41 @@
++/*
++ * Early initialization code for BCM94710 boards
++ *
++ * Copyright 2004, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: prom.c,v 1.1 2005/03/16 13:49:59 wbx Exp $
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <asm/bootinfo.h>
++
++void __init
++prom_init(int argc, const char **argv)
++{
++ unsigned long mem;
++
++ mips_machgroup = MACH_GROUP_BRCM;
++ mips_machtype = MACH_BCM947XX;
++
++ /* Figure out memory size by finding aliases */
++ for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
++ if (*(unsigned long *)((unsigned long)(prom_init) + mem) ==
++ *(unsigned long *)(prom_init))
++ break;
++ }
++ add_memory_region(0, mem, BOOT_MEM_RAM);
++}
++
++void __init
++prom_free_prom_memory(void)
++{
++}
+diff -urN linux.old/arch/mips/bcm947xx/sbmips.c linux.dev/arch/mips/bcm947xx/sbmips.c
+--- linux.old/arch/mips/bcm947xx/sbmips.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/sbmips.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,1132 @@
++/*
++ * BCM47XX Sonics SiliconBackplane MIPS core routines
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: hndmips.c,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $
++ */
++
++#include <typedefs.h>
++#include <bcmdefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <sbutils.h>
++#include <bcmdevs.h>
++#include <bcmnvram.h>
++#include <sbconfig.h>
++#include <sbextif.h>
++#include <sbchipc.h>
++#include <sbmemc.h>
++#include <mipsinc.h>
++#include <sbhndmips.h>
++#include <hndcpu.h>
++
++/* sbipsflag register format, indexed by irq. */
++static const uint32 sbips_int_mask[] = {
++ 0, /* placeholder */
++ SBIPS_INT1_MASK,
++ SBIPS_INT2_MASK,
++ SBIPS_INT3_MASK,
++ SBIPS_INT4_MASK
++};
++
++static const uint32 sbips_int_shift[] = {
++ 0, /* placeholder */
++ SBIPS_INT1_SHIFT,
++ SBIPS_INT2_SHIFT,
++ SBIPS_INT3_SHIFT,
++ SBIPS_INT4_SHIFT
++};
++
++/*
++ * Map SB cores sharing the MIPS hardware IRQ0 to virtual dedicated OS IRQs.
++ * Per-port BSP code is required to provide necessary translations between
++ * the shared MIPS IRQ and the virtual OS IRQs based on SB core flag.
++ *
++ * See sb_irq() for the mapping.
++ */
++static uint shirq_map_base = 0;
++
++/* Returns the SB interrupt flag of the current core. */
++static uint32
++sb_getflag(sb_t *sbh)
++{
++ osl_t *osh;
++ void *regs;
++ sbconfig_t *sb;
++
++ osh = sb_osh(sbh);
++ regs = sb_coreregs(sbh);
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++
++ return (R_REG(osh, &sb->sbtpsflag) & SBTPS_NUM0_MASK);
++}
++
++/*
++ * Returns the MIPS IRQ assignment of the current core. If unassigned,
++ * 0 is returned.
++ */
++uint
++sb_irq(sb_t *sbh)
++{
++ osl_t *osh;
++ uint idx;
++ void *regs;
++ sbconfig_t *sb;
++ uint32 flag, sbipsflag;
++ uint irq = 0;
++
++ osh = sb_osh(sbh);
++ flag = sb_getflag(sbh);
++
++ idx = sb_coreidx(sbh);
++
++ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
++ (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++
++ /* sbipsflag specifies which core is routed to interrupts 1 to 4 */
++ sbipsflag = R_REG(osh, &sb->sbipsflag);
++ for (irq = 1; irq <= 4; irq++) {
++ if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag)
++ break;
++ }
++ if (irq == 5)
++ irq = 0;
++ }
++
++ sb_setcoreidx(sbh, idx);
++
++ return irq;
++}
++
++/* Clears the specified MIPS IRQ. */
++static void
++BCMINITFN(sb_clearirq)(sb_t *sbh, uint irq)
++{
++ osl_t *osh;
++ void *regs;
++ sbconfig_t *sb;
++
++ osh = sb_osh(sbh);
++
++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
++ !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
++ ASSERT(regs);
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++
++ if (irq == 0)
++ W_REG(osh, &sb->sbintvec, 0);
++ else
++ OR_REG(osh, &sb->sbipsflag, sbips_int_mask[irq]);
++}
++
++/*
++ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS
++ * IRQ 0 may be assigned more than once.
++ *
++ * The old assignment to the specified core is removed first.
++ */
++static void
++BCMINITFN(sb_setirq)(sb_t *sbh, uint irq, uint coreid, uint coreunit)
++{
++ osl_t *osh;
++ void *regs;
++ sbconfig_t *sb;
++ uint32 flag;
++ uint oldirq;
++
++ osh = sb_osh(sbh);
++
++ regs = sb_setcore(sbh, coreid, coreunit);
++ ASSERT(regs);
++ flag = sb_getflag(sbh);
++ oldirq = sb_irq(sbh);
++ if (oldirq)
++ sb_clearirq(sbh, oldirq);
++
++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
++ !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
++ ASSERT(regs);
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++
++ if (!oldirq)
++ AND_REG(osh, &sb->sbintvec, ~(1 << flag));
++
++ if (irq == 0)
++ OR_REG(osh, &sb->sbintvec, 1 << flag);
++ else {
++ flag <<= sbips_int_shift[irq];
++ ASSERT(!(flag & ~sbips_int_mask[irq]));
++ flag |= R_REG(osh, &sb->sbipsflag) & ~sbips_int_mask[irq];
++ W_REG(osh, &sb->sbipsflag, flag);
++ }
++}
++
++/*
++ * Initializes clocks and interrupts. SB and NVRAM access must be
++ * initialized prior to calling.
++ *
++ * 'shirqmap' enables virtual dedicated OS IRQ mapping if non-zero.
++ */
++void
++BCMINITFN(sb_mips_init)(sb_t *sbh, uint shirqmap)
++{
++ osl_t *osh;
++ ulong hz, ns, tmp;
++ extifregs_t *eir;
++ chipcregs_t *cc;
++ char *value;
++ uint irq;
++
++ osh = sb_osh(sbh);
++
++ /* Figure out current SB clock speed */
++ if ((hz = sb_clock(sbh)) == 0)
++ hz = 100000000;
++ ns = 1000000000 / hz;
++
++ /* Setup external interface timing */
++ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
++ /* Initialize extif so we can get to the LEDs and external UART */
++ W_REG(osh, &eir->prog_config, CF_EN);
++
++ /* Set timing for the flash */
++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
++ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
++ W_REG(osh, &eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
++
++ /* Set programmable interface timing for external uart */
++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
++ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
++ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
++ W_REG(osh, &eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
++ } else if ((cc = sb_setcore(sbh, SB_CC, 0))) {
++ /* Set timing for the flash */
++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
++ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */
++ tmp |= CEIL(120, ns); /* W0 = 120nS */
++ if ((sb_corerev(sbh) < 9) ||
++ (BCMINIT(sb_chip)(sbh) == 0x5365))
++ W_REG(osh, &cc->flash_waitcount, tmp);
++
++ if ((sb_corerev(sbh) < 9) ||
++ ((sb_chip(sbh) == BCM5350_CHIP_ID) && sb_chiprev(sbh) == 0) ||
++ (BCMINIT(sb_chip)(sbh) == 0x5365)) {
++ W_REG(osh, &cc->pcmcia_memwait, tmp);
++ }
++
++ /* Save shared IRQ mapping base */
++ shirq_map_base = shirqmap;
++ }
++
++ /* Chip specific initialization */
++ switch (sb_chip(sbh)) {
++ case BCM4710_CHIP_ID:
++ /* Clear interrupt map */
++ for (irq = 0; irq <= 4; irq++)
++ sb_clearirq(sbh, irq);
++ sb_setirq(sbh, 0, SB_CODEC, 0);
++ sb_setirq(sbh, 0, SB_EXTIF, 0);
++ sb_setirq(sbh, 2, SB_ENET, 1);
++ sb_setirq(sbh, 3, SB_ILINE20, 0);
++ sb_setirq(sbh, 4, SB_PCI, 0);
++ ASSERT(eir);
++ value = nvram_get("et0phyaddr");
++ if (value && !strcmp(value, "31")) {
++ /* Enable internal UART */
++ W_REG(osh, &eir->corecontrol, CC_UE);
++ /* Give USB its own interrupt */
++ sb_setirq(sbh, 1, SB_USB, 0);
++ } else {
++ /* Disable internal UART */
++ W_REG(osh, &eir->corecontrol, 0);
++ /* Give Ethernet its own interrupt */
++ sb_setirq(sbh, 1, SB_ENET, 0);
++ sb_setirq(sbh, 0, SB_USB, 0);
++ }
++ break;
++ case BCM5350_CHIP_ID:
++ /* Clear interrupt map */
++ for (irq = 0; irq <= 4; irq++)
++ sb_clearirq(sbh, irq);
++ sb_setirq(sbh, 0, SB_CC, 0);
++ sb_setirq(sbh, 0, SB_MIPS33, 0);
++ sb_setirq(sbh, 1, SB_D11, 0);
++ sb_setirq(sbh, 2, SB_ENET, 0);
++ sb_setirq(sbh, 3, SB_PCI, 0);
++ sb_setirq(sbh, 4, SB_USB, 0);
++ break;
++ case BCM4785_CHIP_ID:
++ /* Reassign PCI to irq 4 */
++ sb_setirq(sbh, 4, SB_PCI, 0);
++ break;
++ }
++}
++
++uint32
++BCMINITFN(sb_cpu_clock)(sb_t *sbh)
++{
++ extifregs_t *eir;
++ chipcregs_t *cc;
++ uint32 n, m;
++ uint idx;
++ uint32 pll_type, rate = 0;
++
++ /* get index of the current core */
++ idx = sb_coreidx(sbh);
++ pll_type = PLL_TYPE1;
++
++ /* switch to extif or chipc core */
++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
++ n = R_REG(osh, &eir->clockcontrol_n);
++ m = R_REG(osh, &eir->clockcontrol_sb);
++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++ pll_type = R_REG(osh, &cc->capabilities) & CAP_PLL_MASK;
++ n = R_REG(osh, &cc->clockcontrol_n);
++ if ((pll_type == PLL_TYPE2) ||
++ (pll_type == PLL_TYPE4) ||
++ (pll_type == PLL_TYPE6) ||
++ (pll_type == PLL_TYPE7))
++ m = R_REG(osh, &cc->clockcontrol_m3);
++ else if (pll_type == PLL_TYPE5) {
++ rate = 200000000;
++ goto out;
++ }
++ else if (pll_type == PLL_TYPE3) {
++ if (sb_chip(sbh) == BCM5365_CHIP_ID) {
++ rate = 200000000;
++ goto out;
++ }
++ /* 5350 uses m2 to control mips */
++ else
++ m = R_REG(osh, &cc->clockcontrol_m2);
++ } else
++ m = R_REG(osh, &cc->clockcontrol_sb);
++ } else
++ goto out;
++
++
++ /* calculate rate */
++ if (BCMINIT(sb_chip)(sbh) == 0x5365)
++ rate = 100000000;
++ else
++ rate = sb_clock_rate(pll_type, n, m);
++
++ if (pll_type == PLL_TYPE6)
++ rate = SB2MIPS_T6(rate);
++
++out:
++ /* switch back to previous core */
++ sb_setcoreidx(sbh, idx);
++
++ return rate;
++}
++
++#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
++
++static void
++BCMINITFN(handler)(void)
++{
++ __asm__(
++ ".set\tmips32\n\t"
++ "ssnop\n\t"
++ "ssnop\n\t"
++ /* Disable interrupts */
++ /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */
++ "mfc0 $15, $12\n\t"
++ /* Just a Hack to not to use reg 'at' which was causing problems on 4704 A2 */
++ "li $14, -31746\n\t"
++ "and $15, $15, $14\n\t"
++ "mtc0 $15, $12\n\t"
++ "eret\n\t"
++ "nop\n\t"
++ "nop\n\t"
++ ".set\tmips0");
++}
++
++/* The following MUST come right after handler() */
++static void
++BCMINITFN(afterhandler)(void)
++{
++}
++
++/*
++ * Set the MIPS, backplane and PCI clocks as closely as possible.
++ *
++ * MIPS clocks synchronization function has been moved from PLL in chipcommon
++ * core rev. 15 to a DLL inside the MIPS core in 4785.
++ */
++bool
++BCMINITFN(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock)
++{
++ extifregs_t *eir = NULL;
++ chipcregs_t *cc = NULL;
++ mipsregs_t *mipsr = NULL;
++ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci, *clockcontrol_m2;
++ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, orig_ratio_cfg;
++ uint32 pll_type, sync_mode;
++ uint ic_size, ic_lsize;
++ uint idx, i;
++
++ /* PLL configuration: type 1 */
++ typedef struct {
++ uint32 mipsclock;
++ uint16 n;
++ uint32 sb;
++ uint32 pci33;
++ uint32 pci25;
++ } n3m_table_t;
++ static n3m_table_t BCMINITDATA(type1_table)[] = {
++ /* 96.000 32.000 24.000 */
++ { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 },
++ /* 100.000 33.333 25.000 */
++ { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 },
++ /* 104.000 31.200 24.960 */
++ { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 },
++ /* 108.000 32.400 24.923 */
++ { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 },
++ /* 112.000 32.000 24.889 */
++ { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 },
++ /* 115.200 32.000 24.000 */
++ { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 },
++ /* 120.000 30.000 24.000 */
++ { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 },
++ /* 124.800 31.200 24.960 */
++ { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 },
++ /* 128.000 32.000 24.000 */
++ { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 },
++ /* 132.000 33.000 24.750 */
++ { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 },
++ /* 136.000 32.640 24.727 */
++ { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 },
++ /* 140.000 30.000 24.706 */
++ { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 },
++ /* 144.000 30.857 24.686 */
++ { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 },
++ /* 150.857 33.000 24.000 */
++ { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 },
++ /* 152.000 32.571 24.000 */
++ { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 },
++ /* 156.000 31.200 24.960 */
++ { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 },
++ /* 160.000 32.000 24.000 */
++ { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 },
++ /* 163.200 32.640 24.727 */
++ { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 },
++ /* 168.000 32.000 24.889 */
++ { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 },
++ /* 176.000 33.000 24.000 */
++ { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 },
++ };
++
++ /* PLL configuration: type 3 */
++ typedef struct {
++ uint32 mipsclock;
++ uint16 n;
++ uint32 m2; /* that is the clockcontrol_m2 */
++ } type3_table_t;
++ static type3_table_t type3_table[] = {
++ /* for 5350, mips clock is always double sb clock */
++ { 150000000, 0x311, 0x4020005 },
++ { 200000000, 0x311, 0x4020003 },
++ };
++
++ /* PLL configuration: type 2, 4, 7 */
++ typedef struct {
++ uint32 mipsclock;
++ uint32 sbclock;
++ uint16 n;
++ uint32 sb;
++ uint32 pci33;
++ uint32 m2;
++ uint32 m3;
++ uint32 ratio_cfg;
++ uint32 ratio_parm;
++ uint32 d11_r1;
++ uint32 d11_r2;
++ } n4m_table_t;
++ static n4m_table_t BCMINITDATA(type2_table)[] = {
++ { 120000000, 60000000, 0x0303, 0x01000200, 0x01000600, 0x01000200, 0x05000200, 11,
++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 150000000, 75000000, 0x0303, 0x01000100, 0x01000600, 0x01000100, 0x05000100, 11,
++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 8,
++ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 },
++ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 11,
++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 200000000, 100000000, 0x0303, 0x02010000, 0x02040001, 0x02010000, 0x06000001, 11,
++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11,
++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11,
++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11,
++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 8,
++ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 },
++ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11,
++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 11,
++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 11,
++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8,
++ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 },
++ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8,
++ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 },
++ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11,
++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8,
++ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 },
++ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11,
++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01010100, 0x05000100, 8,
++ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 },
++ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01010100, 0x05000100, 11,
++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 330000000, 132000000, 0x0903, 0x01000200, 0x00020200, 0x01010100, 0x05000100, 0,
++ 0, 10 /* ratio 4/10 */, 0x02520129 },
++ { 330000000, 146666666, 0x0903, 0x01010000, 0x00020200, 0x01010100, 0x05000100, 0,
++ 0, 9 /* ratio 4/9 */, 0x012a00a9 },
++ { 330000000, 165000000, 0x0903, 0x01000100, 0x00020200, 0x01010100, 0x05000100, 0,
++ 0, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 360000000, 120000000, 0x0a03, 0x01000300, 0x00010201, 0x01010200, 0x05000100, 0,
++ 0, 12 /* ratio 4/12 */, 0x04920492 },
++ { 360000000, 144000000, 0x0a03, 0x01000200, 0x00010201, 0x01010200, 0x05000100, 0,
++ 0, 10 /* ratio 4/10 */, 0x02520129 },
++ { 360000000, 160000000, 0x0a03, 0x01010000, 0x00010201, 0x01010200, 0x05000100, 0,
++ 0, 9 /* ratio 4/9 */, 0x012a00a9 },
++ { 360000000, 180000000, 0x0a03, 0x01000100, 0x00010201, 0x01010200, 0x05000100, 0,
++ 0, 8 /* ratio 4/8 */, 0x00aa0055 },
++ { 390000000, 130000000, 0x0b03, 0x01010100, 0x00020101, 0x01020100, 0x05000100, 0,
++ 0, 12 /* ratio 4/12 */, 0x04920492 },
++ { 390000000, 156000000, 0x0b03, 0x01000200, 0x00020101, 0x01020100, 0x05000100, 0,
++ 0, 10 /* ratio 4/10 */, 0x02520129 },
++ { 390000000, 173000000, 0x0b03, 0x01010000, 0x00020101, 0x01020100, 0x05000100, 0,
++ 0, 9 /* ratio 4/9 */, 0x012a00a9 },
++ { 390000000, 195000000, 0x0b03, 0x01000100, 0x00020101, 0x01020100, 0x05000100, 0,
++ 0, 8 /* ratio 4/8 */, 0x00aa0055 },
++ };
++ static n4m_table_t BCMINITDATA(type4_table)[] = {
++ { 120000000, 60000000, 0x0009, 0x11020009, 0x01030203, 0x11020009, 0x04000009, 11,
++ 0x0aaa0555 },
++ { 150000000, 75000000, 0x0009, 0x11050002, 0x01030203, 0x11050002, 0x04000005, 11,
++ 0x0aaa0555 },
++ { 192000000, 96000000, 0x0702, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11,
++ 0x0aaa0555 },
++ { 198000000, 99000000, 0x0603, 0x11020005, 0x11030011, 0x11020005, 0x04000005, 11,
++ 0x0aaa0555 },
++ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11,
++ 0x0aaa0555 },
++ { 204000000, 102000000, 0x0c02, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11,
++ 0x0aaa0555 },
++ { 208000000, 104000000, 0x0802, 0x11030002, 0x11090005, 0x11030002, 0x04000003, 11,
++ 0x0aaa0555 },
++ { 210000000, 105000000, 0x0209, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11,
++ 0x0aaa0555 },
++ { 216000000, 108000000, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11,
++ 0x0aaa0555 },
++ { 224000000, 112000000, 0x0205, 0x11030002, 0x02002103, 0x11030002, 0x04000003, 11,
++ 0x0aaa0555 },
++ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x01030305, 0x04000005, 8,
++ 0x012a00a9 },
++ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11,
++ 0x0aaa0555 },
++ { 240000000, 102857143, 0x0109, 0x04000021, 0x01050203, 0x11030021, 0x04000003, 13,
++ 0x254a14a9 },
++ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 11,
++ 0x0aaa0555 },
++ { 252000000, 100800000, 0x0203, 0x04000009, 0x11050005, 0x02000209, 0x04000002, 9,
++ 0x02520129 },
++ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11,
++ 0x0aaa0555 },
++ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11,
++ 0x0aaa0555 },
++ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 13,
++ 0x254a14a9 },
++ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13,
++ 0x254a14a9 },
++ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13,
++ 0x254a14a9 },
++ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 9,
++ 0x02520129 },
++ { 300000000, 150000000, 0x0009, 0x04000005, 0x01030203, 0x04000005, 0x04000002, 11,
++ 0x0aaa0555 }
++ };
++ static n4m_table_t BCMINITDATA(type7_table)[] = {
++ { 183333333, 91666666, 0x0605, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11,
++ 0x0aaa0555 },
++ { 187500000, 93750000, 0x0a03, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11,
++ 0x0aaa0555 },
++ { 196875000, 98437500, 0x1003, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11,
++ 0x0aaa0555 },
++ { 200000000, 100000000, 0x0311, 0x04000011, 0x11030011, 0x04000009, 0x04000003, 11,
++ 0x0aaa0555 },
++ { 200000000, 100000000, 0x0311, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11,
++ 0x0aaa0555 },
++ { 206250000, 103125000, 0x1103, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11,
++ 0x0aaa0555 },
++ { 212500000, 106250000, 0x0c05, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11,
++ 0x0aaa0555 },
++ { 215625000, 107812500, 0x1203, 0x11090009, 0x11050005, 0x11020005, 0x04000005, 11,
++ 0x0aaa0555 },
++ { 216666666, 108333333, 0x0805, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11,
++ 0x0aaa0555 },
++ { 225000000, 112500000, 0x0d03, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11,
++ 0x0aaa0555 },
++ { 233333333, 116666666, 0x0905, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11,
++ 0x0aaa0555 },
++ { 237500000, 118750000, 0x0e05, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11,
++ 0x0aaa0555 },
++ { 240000000, 120000000, 0x0b11, 0x11020009, 0x11210009, 0x11020009, 0x04000009, 11,
++ 0x0aaa0555 },
++ { 250000000, 125000000, 0x0f03, 0x11020003, 0x11210003, 0x11020003, 0x04000003, 11,
++ 0x0aaa0555 }
++ };
++
++ ulong start, end, dst;
++ bool ret = FALSE;
++
++ volatile uint32 *dll_ctrl = (volatile uint32 *)0xff400008;
++ volatile uint32 *dll_r1 = (volatile uint32 *)0xff400010;
++ volatile uint32 *dll_r2 = (volatile uint32 *)0xff400018;
++
++ /* get index of the current core */
++ idx = sb_coreidx(sbh);
++ clockcontrol_m2 = NULL;
++
++ /* switch to extif or chipc core */
++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
++ pll_type = PLL_TYPE1;
++ clockcontrol_n = &eir->clockcontrol_n;
++ clockcontrol_sb = &eir->clockcontrol_sb;
++ clockcontrol_pci = &eir->clockcontrol_pci;
++ clockcontrol_m2 = &cc->clockcontrol_m2;
++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++ pll_type = R_REG(osh, &cc->capabilities) & CAP_PLL_MASK;
++ if (pll_type == PLL_TYPE6) {
++ clockcontrol_n = NULL;
++ clockcontrol_sb = NULL;
++ clockcontrol_pci = NULL;
++ } else {
++ clockcontrol_n = &cc->clockcontrol_n;
++ clockcontrol_sb = &cc->clockcontrol_sb;
++ clockcontrol_pci = &cc->clockcontrol_pci;
++ clockcontrol_m2 = &cc->clockcontrol_m2;
++ }
++ } else
++ goto done;
++
++ if (pll_type == PLL_TYPE6) {
++ /* Silence compilers */
++ orig_n = orig_sb = orig_pci = 0;
++ } else {
++ /* Store the current clock register values */
++ orig_n = R_REG(osh, clockcontrol_n);
++ orig_sb = R_REG(osh, clockcontrol_sb);
++ orig_pci = R_REG(osh, clockcontrol_pci);
++ }
++
++ if (pll_type == PLL_TYPE1) {
++ /* Keep the current PCI clock if not specified */
++ if (pciclock == 0) {
++ pciclock = sb_clock_rate(pll_type, R_REG(osh, clockcontrol_n),
++ R_REG(osh, clockcontrol_pci));
++ pciclock = (pciclock <= 25000000) ? 25000000 : 33000000;
++ }
++
++ /* Search for the closest MIPS clock less than or equal to a preferred value */
++ for (i = 0; i < ARRAYSIZE(type1_table); i++) {
++ ASSERT(type1_table[i].mipsclock ==
++ sb_clock_rate(pll_type, type1_table[i].n,
++ type1_table[i].sb));
++ if (type1_table[i].mipsclock > mipsclock)
++ break;
++ }
++ if (i == 0) {
++ ret = FALSE;
++ goto done;
++ } else {
++ ret = TRUE;
++ i--;
++ }
++ ASSERT(type1_table[i].mipsclock <= mipsclock);
++
++ /* No PLL change */
++ if ((orig_n == type1_table[i].n) &&
++ (orig_sb == type1_table[i].sb) &&
++ (orig_pci == type1_table[i].pci33))
++ goto done;
++
++ /* Set the PLL controls */
++ W_REG(osh, clockcontrol_n, type1_table[i].n);
++ W_REG(osh, clockcontrol_sb, type1_table[i].sb);
++ if (pciclock == 25000000)
++ W_REG(osh, clockcontrol_pci, type1_table[i].pci25);
++ else
++ W_REG(osh, clockcontrol_pci, type1_table[i].pci33);
++
++ /* Reset */
++ sb_watchdog(sbh, 1);
++ while (1);
++ } else if (pll_type == PLL_TYPE3) {
++ /* 5350 */
++ if (sb_chip(sbh) != BCM5365_CHIP_ID) {
++ /*
++ * Search for the closest MIPS clock less than or equal to
++ * a preferred value.
++ */
++ for (i = 0; i < ARRAYSIZE(type3_table); i++) {
++ if (type3_table[i].mipsclock > mipsclock)
++ break;
++ }
++ if (i == 0) {
++ ret = FALSE;
++ goto done;
++ } else {
++ ret = TRUE;
++ i--;
++ }
++ ASSERT(type3_table[i].mipsclock <= mipsclock);
++
++ /* No PLL change */
++ orig_m2 = R_REG(osh, &cc->clockcontrol_m2);
++ if ((orig_n == type3_table[i].n) &&
++ (orig_m2 == type3_table[i].m2)) {
++ goto done;
++ }
++
++ /* Set the PLL controls */
++ W_REG(osh, clockcontrol_n, type3_table[i].n);
++ W_REG(osh, clockcontrol_m2, type3_table[i].m2);
++
++ /* Reset */
++ sb_watchdog(sbh, 1);
++ while (1);
++ }
++ } else if ((pll_type == PLL_TYPE2) ||
++ (pll_type == PLL_TYPE4) ||
++ (pll_type == PLL_TYPE6) ||
++ (pll_type == PLL_TYPE7)) {
++ n4m_table_t *table = NULL, *te;
++ uint tabsz = 0;
++
++ ASSERT(cc);
++
++ orig_mips = R_REG(osh, &cc->clockcontrol_m3);
++
++ switch (pll_type) {
++ case PLL_TYPE6: {
++ uint32 new_mips = 0;
++
++ ret = TRUE;
++ if (mipsclock <= SB2MIPS_T6(CC_T6_M1))
++ new_mips = CC_T6_MMASK;
++
++ if (orig_mips == new_mips)
++ goto done;
++
++ W_REG(osh, &cc->clockcontrol_m3, new_mips);
++ goto end_fill;
++ }
++ case PLL_TYPE2:
++ table = type2_table;
++ tabsz = ARRAYSIZE(type2_table);
++ break;
++ case PLL_TYPE4:
++ table = type4_table;
++ tabsz = ARRAYSIZE(type4_table);
++ break;
++ case PLL_TYPE7:
++ table = type7_table;
++ tabsz = ARRAYSIZE(type7_table);
++ break;
++ default:
++ ASSERT("No table for plltype" == NULL);
++ break;
++ }
++
++ /* Store the current clock register values */
++ orig_m2 = R_REG(osh, &cc->clockcontrol_m2);
++ orig_ratio_parm = 0;
++ orig_ratio_cfg = 0;
++
++ /* Look up current ratio */
++ for (i = 0; i < tabsz; i++) {
++ if ((orig_n == table[i].n) &&
++ (orig_sb == table[i].sb) &&
++ (orig_pci == table[i].pci33) &&
++ (orig_m2 == table[i].m2) &&
++ (orig_mips == table[i].m3)) {
++ orig_ratio_parm = table[i].ratio_parm;
++ orig_ratio_cfg = table[i].ratio_cfg;
++ break;
++ }
++ }
++
++ /* Search for the closest MIPS clock greater or equal to a preferred value */
++ for (i = 0; i < tabsz; i++) {
++ ASSERT(table[i].mipsclock ==
++ sb_clock_rate(pll_type, table[i].n, table[i].m3));
++ if ((mipsclock <= table[i].mipsclock) &&
++ ((sbclock == 0) || (sbclock <= table[i].sbclock)))
++ break;
++ }
++ if (i == tabsz) {
++ ret = FALSE;
++ goto done;
++ } else {
++ te = &table[i];
++ ret = TRUE;
++ }
++
++ /* No PLL change */
++ if ((orig_n == te->n) &&
++ (orig_sb == te->sb) &&
++ (orig_pci == te->pci33) &&
++ (orig_m2 == te->m2) &&
++ (orig_mips == te->m3))
++ goto done;
++
++ /* Set the PLL controls */
++ W_REG(osh, clockcontrol_n, te->n);
++ W_REG(osh, clockcontrol_sb, te->sb);
++ W_REG(osh, clockcontrol_pci, te->pci33);
++ W_REG(osh, &cc->clockcontrol_m2, te->m2);
++ W_REG(osh, &cc->clockcontrol_m3, te->m3);
++
++ /* Set the chipcontrol bit to change mipsref to the backplane divider if needed */
++ if ((pll_type == PLL_TYPE7) && (te->sb != te->m2) &&
++ (sb_clock_rate(pll_type, te->n, te->m2) == 120000000))
++ W_REG(osh, &cc->chipcontrol,
++ R_REG(osh, &cc->chipcontrol) | 0x100);
++
++ /* No ratio change */
++ if (sb_chip(sbh) != BCM4785_CHIP_ID) {
++ if (orig_ratio_parm == te->ratio_parm)
++ goto end_fill;
++ }
++
++ /* Preload the code into the cache */
++ icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize);
++ if (sb_chip(sbh) == BCM4785_CHIP_ID) {
++ start = ((ulong) &&start_fill_4785) & ~(ic_lsize - 1);
++ end = ((ulong) &&end_fill_4785 + (ic_lsize - 1)) & ~(ic_lsize - 1);
++ }
++ else {
++ start = ((ulong) &&start_fill) & ~(ic_lsize - 1);
++ end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1);
++ }
++ while (start < end) {
++ cache_op(start, Fill_I);
++ start += ic_lsize;
++ }
++
++ /* Copy the handler */
++ start = (ulong) &handler;
++ end = (ulong) &afterhandler;
++ dst = KSEG1ADDR(0x180);
++ for (i = 0; i < (end - start); i += 4)
++ *((ulong *)(dst + i)) = *((ulong *)(start + i));
++
++ /* Preload the handler into the cache one line at a time */
++ for (i = 0; i < (end - start); i += ic_lsize)
++ cache_op(dst + i, Fill_I);
++
++ /* Clear BEV bit */
++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV);
++
++ /* Enable interrupts */
++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE));
++
++ /* 4785 clock freq change procedures */
++ if (sb_chip(sbh) == BCM4785_CHIP_ID) {
++ start_fill_4785:
++ /* Switch to async */
++ MTC0(C0_BROADCOM, 4, (1 << 22));
++
++ /* Set clock ratio in MIPS */
++ *dll_r1 = (*dll_r1 & 0xfffffff0) | (te->d11_r1 - 1);
++ *dll_r2 = te->d11_r2;
++
++ /* Enable new settings in MIPS */
++ *dll_r1 = *dll_r1 | 0xc0000000;
++
++ /* Set active cfg */
++ MTC0(C0_BROADCOM, 2, MFC0(C0_BROADCOM, 2) | (1 << 3) | 1);
++
++ /* Fake soft reset (clock cfg registers not reset) */
++ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | (1 << 2));
++
++ /* Clear active cfg */
++ MTC0(C0_BROADCOM, 2, MFC0(C0_BROADCOM, 2) & ~(1 << 3));
++
++ /* set watchdog timer */
++ W_REG(osh, &cc->watchdog, 20);
++ (void) R_REG(osh, &cc->chipid);
++
++ /* wait for timer interrupt */
++ __asm__ __volatile__(
++ ".set\tmips3\n\t"
++ "sync\n\t"
++ "wait\n\t"
++ ".set\tmips0");
++ end_fill_4785:
++ while (1);
++ }
++ /* Generic clock freq change procedures */
++ else {
++ /* Enable MIPS timer interrupt */
++ if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) &&
++ !(mipsr = sb_setcore(sbh, SB_MIPS33, 0)))
++ ASSERT(mipsr);
++ W_REG(osh, &mipsr->intmask, 1);
++
++ start_fill:
++ /* step 1, set clock ratios */
++ MTC0(C0_BROADCOM, 3, te->ratio_parm);
++ MTC0(C0_BROADCOM, 1, te->ratio_cfg);
++
++ /* step 2: program timer intr */
++ W_REG(osh, &mipsr->timer, 100);
++ (void) R_REG(osh, &mipsr->timer);
++
++ /* step 3, switch to async */
++ sync_mode = MFC0(C0_BROADCOM, 4);
++ MTC0(C0_BROADCOM, 4, 1 << 22);
++
++ /* step 4, set cfg active */
++ MTC0(C0_BROADCOM, 2, (1 << 3) | 1);
++
++ /* steps 5 & 6 */
++ __asm__ __volatile__(
++ ".set\tmips3\n\t"
++ "wait\n\t"
++ ".set\tmips0");
++
++ /* step 7, clear cfg active */
++ MTC0(C0_BROADCOM, 2, 0);
++
++ /* Additional Step: set back to orig sync mode */
++ MTC0(C0_BROADCOM, 4, sync_mode);
++
++ /* step 8, fake soft reset */
++ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | (1 << 2));
++
++ end_fill:
++ /* set watchdog timer */
++ W_REG(osh, &cc->watchdog, 20);
++ (void) R_REG(osh, &cc->chipid);
++
++ /* wait for timer interrupt */
++ __asm__ __volatile__(
++ ".set\tmips3\n\t"
++ "sync\n\t"
++ "wait\n\t"
++ ".set\tmips0");
++ while (1);
++ }
++ }
++
++done:
++ /* Enable 4785 DLL */
++ if (sb_chip(sbh) == BCM4785_CHIP_ID) {
++ uint32 tmp;
++
++ /* set mask to 1e, enable DLL (bit 0) */
++ *dll_ctrl |= 0x0041e021;
++
++ /* enable aggressive hardware mode */
++ *dll_ctrl |= 0x00000080;
++
++ /* wait for lock flag to clear */
++ while ((*dll_ctrl & 0x2) == 0);
++
++ /* clear sticky flags (clear on write 1) */
++ tmp = *dll_ctrl;
++ *dll_ctrl = tmp;
++
++ /* set mask to 5b'10001 */
++ *dll_ctrl = (*dll_ctrl & 0xfffc1fff) | 0x00022000;
++
++ /* enable sync mode */
++ MTC0(C0_BROADCOM, 4, MFC0(C0_BROADCOM, 4) & 0xfe3fffff);
++ (void)MFC0(C0_BROADCOM, 4);
++ }
++
++ /* switch back to previous core */
++ sb_setcoreidx(sbh, idx);
++
++ return ret;
++}
++
++void
++BCMINITFN(enable_pfc)(uint32 mode)
++{
++ ulong start, end;
++ uint ic_size, ic_lsize;
++
++ /* If auto then choose the correct mode for this
++ * platform, currently we only ever select one mode
++ */
++ if (mode == PFC_AUTO)
++ mode = PFC_INST;
++
++ icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize);
++
++ /* enable prefetch cache if available */
++ if (MFC0(C0_BROADCOM, 0) & BRCM_PFC_AVAIL) {
++ start = ((ulong) &&setpfc_start) & ~(ic_lsize - 1);
++ end = ((ulong) &&setpfc_end + (ic_lsize - 1)) & ~(ic_lsize - 1);
++
++ /* Preload setpfc code into the cache one line at a time */
++ while (start < end) {
++ cache_op(start, Fill_I);
++ start += ic_lsize;
++ }
++
++ /* Now set the pfc */
++ setpfc_start:
++ /* write range */
++ *(volatile uint32 *)PFC_CR1 = 0xffff0000;
++
++ /* enable */
++ *(volatile uint32 *)PFC_CR0 = mode;
++ setpfc_end:
++ /* Compiler foder */
++ ic_size = 0;
++ }
++}
++
++/* returns the ncdl value to be programmed into sdram_ncdl for calibration */
++uint32
++BCMINITFN(sb_memc_get_ncdl)(sb_t *sbh)
++{
++ osl_t *osh;
++ sbmemcregs_t *memc;
++ uint32 ret = 0;
++ uint32 config, rd, wr, misc, dqsg, cd, sm, sd;
++ uint idx, rev;
++
++ osh = sb_osh(sbh);
++
++ idx = sb_coreidx(sbh);
++
++ memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0);
++ if (memc == 0)
++ goto out;
++
++ rev = sb_corerev(sbh);
++
++ config = R_REG(osh, &memc->config);
++ wr = R_REG(osh, &memc->wrncdlcor);
++ rd = R_REG(osh, &memc->rdncdlcor);
++ misc = R_REG(osh, &memc->miscdlyctl);
++ dqsg = R_REG(osh, &memc->dqsgatencdl);
++
++ rd &= MEMC_RDNCDLCOR_RD_MASK;
++ wr &= MEMC_WRNCDLCOR_WR_MASK;
++ dqsg &= MEMC_DQSGATENCDL_G_MASK;
++
++ if (config & MEMC_CONFIG_DDR) {
++ ret = (wr << 16) | (rd << 8) | dqsg;
++ } else {
++ if (rev > 0)
++ cd = rd;
++ else
++ cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD);
++ sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT;
++ sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT;
++ ret = (sm << 16) | (sd << 8) | cd;
++ }
++
++out:
++ /* switch back to previous core */
++ sb_setcoreidx(sbh, idx);
++
++ return ret;
++}
++
++#if defined(BCMPERFSTATS)
++/*
++ * CP0 Register 25 supports 4 semi-independent 32bit performance counters.
++ * $25 select 0, 1, 2, and 3 are the counters. The counters *decrement* (who thought this one up?)
++ * $25 select 4 and 5 each contain 2-16bit control fields, one for each of the 4 counters
++ * $25 select 6 is the global perf control register.
++ */
++/* enable and start instruction counting */
++
++void
++hndmips_perf_instrcount_enable()
++{
++ MTC0(C0_PERFORMANCE, 6, 0x80000200); /* global enable perf counters */
++ MTC0(C0_PERFORMANCE, 4,
++ 0x8044 | MFC0(C0_PERFORMANCE, 4)); /* enable instruction counting for counter 0 */
++ MTC0(C0_PERFORMANCE, 0, 0); /* zero counter zero */
++}
++
++/* enable and start I$ hit and I$ miss counting */
++void
++hndmips_perf_icachecount_enable(void)
++{
++ MTC0(C0_PERFORMANCE, 6, 0x80000218); /* enable I$ counting */
++ MTC0(C0_PERFORMANCE, 4, 0x80148018); /* count I$ hits in cntr 0 and misses in cntr 1 */
++ MTC0(C0_PERFORMANCE, 0, 0); /* zero counter 0 - # I$ hits */
++ MTC0(C0_PERFORMANCE, 1, 0); /* zero counter 1 - # I$ misses */
++}
++
++/* enable and start D$ hit and I$ miss counting */
++void
++hndmips_perf_dcachecount_enable(void)
++{
++ MTC0(C0_PERFORMANCE, 6, 0x80000211); /* enable D$ counting */
++ MTC0(C0_PERFORMANCE, 4, 0x80248028); /* count D$ hits in cntr 0 and misses in cntr 1 */
++ MTC0(C0_PERFORMANCE, 0, 0); /* zero counter 0 - # D$ hits */
++ MTC0(C0_PERFORMANCE, 1, 0); /* zero counter 1 - # D$ misses */
++}
++
++void
++hndmips_perf_icache_miss_enable()
++{
++ MTC0(C0_PERFORMANCE, 4,
++ 0x80140000 | MFC0(C0_PERFORMANCE, 4)); /* enable cache misses counting for counter 1 */
++ MTC0(C0_PERFORMANCE, 1, 0); /* zero counter one */
++}
++
++
++void
++hndmips_perf_icache_hit_enable()
++{
++ MTC0(C0_PERFORMANCE, 5, 0x8018 | MFC0(C0_PERFORMANCE, 5));
++ /* enable cache hits counting for counter 2 */
++ MTC0(C0_PERFORMANCE, 2, 0); /* zero counter 2 */
++}
++
++uint32
++hndmips_perf_read_instrcount()
++{
++ return -(long)(MFC0(C0_PERFORMANCE, 0));
++}
++
++uint32
++hndmips_perf_read_cache_miss()
++{
++ return -(long)(MFC0(C0_PERFORMANCE, 1));
++}
++
++uint32
++hndmips_perf_read_cache_hit()
++{
++ return -(long)(MFC0(C0_PERFORMANCE, 2));
++}
++
++#endif /* BCMINTERNAL | BCMPERFSTATS */
+diff -urN linux.old/arch/mips/bcm947xx/sbpci.c linux.dev/arch/mips/bcm947xx/sbpci.c
+--- linux.old/arch/mips/bcm947xx/sbpci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/sbpci.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,768 @@
++/*
++ * Low-Level PCI and SB support for BCM47xx
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: hndpci.c,v 1.1.1.3 2006/04/08 06:13:39 honor Exp $
++ */
++
++#include <typedefs.h>
++#include <osl.h>
++#include <pcicfg.h>
++#include <bcmdevs.h>
++#include <sbconfig.h>
++#include <bcmutils.h>
++#include <sbutils.h>
++#include <sbpci.h>
++#include <bcmendian.h>
++#include <bcmnvram.h>
++#include <hndcpu.h>
++#include <hndmips.h>
++#include <hndpci.h>
++
++/* debug/trace */
++#ifdef BCMDBG_PCI
++#define PCI_MSG(args) printf args
++#else
++#define PCI_MSG(args)
++#endif /* BCMDBG_PCI */
++
++/* Can free sbpci_init() memory after boot */
++#ifndef linux
++#define __init
++#endif /* linux */
++
++/* Emulated configuration space */
++typedef struct {
++ int n;
++ uint size0;
++ uint size1;
++ uint size2;
++ uint size3;
++} sb_bar_cfg_t;
++static pci_config_regs sb_config_regs[SB_MAXCORES];
++static sb_bar_cfg_t sb_bar_cfg[SB_MAXCORES];
++
++/* Links to emulated and real PCI configuration spaces */
++#define MAXFUNCS 2
++typedef struct {
++ pci_config_regs *emu; /* emulated PCI config */
++ pci_config_regs *pci; /* real PCI config */
++ sb_bar_cfg_t *bar; /* region sizes */
++} sb_pci_cfg_t;
++static sb_pci_cfg_t sb_pci_cfg[SB_MAXCORES][MAXFUNCS];
++
++/* Special emulated config space for non-existing device */
++static pci_config_regs sb_pci_null = { 0xffff, 0xffff };
++
++/* Banned cores */
++static uint16 pci_ban[SB_MAXCORES] = { 0 };
++static uint pci_banned = 0;
++
++/* CardBus mode */
++static bool cardbus = FALSE;
++
++/* Disable PCI host core */
++static bool pci_disabled = FALSE;
++
++/* Host bridge slot #, default to 0 */
++static uint8 pci_hbslot = 0;
++
++/* Internal macros */
++#define PCI_SLOTAD_MAP 16 /* SLOT<n> mapps to AD<n+16> */
++#define PCI_HBSBCFG_REV 8 /* MIN. core rev. required to
++ * access host bridge PCI cfg space
++ * from SB
++ */
++
++/*
++ * Functions for accessing external PCI configuration space
++ */
++
++/* Assume one-hot slot wiring */
++#define PCI_SLOT_MAX 16 /* Max. PCI Slots */
++
++static uint32
++config_cmd(sb_t *sbh, uint bus, uint dev, uint func, uint off)
++{
++ uint coreidx;
++ sbpciregs_t *regs;
++ uint32 addr = 0;
++ osl_t *osh;
++
++ /* CardBusMode supports only one device */
++ if (cardbus && dev > 1)
++ return 0;
++
++ osh = sb_osh(sbh);
++
++ coreidx = sb_coreidx(sbh);
++ regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
++
++ /* Type 0 transaction */
++ if (bus == 1) {
++ /* Skip unwired slots */
++ if (dev < PCI_SLOT_MAX) {
++ uint32 win;
++
++ /* Slide the PCI window to the appropriate slot */
++ win = (SBTOPCI_CFG0 | ((1 << (dev + PCI_SLOTAD_MAP)) & SBTOPCI1_MASK));
++ W_REG(osh, &regs->sbtopci1, win);
++ addr = SB_PCI_CFG |
++ ((1 << (dev + PCI_SLOTAD_MAP)) & ~SBTOPCI1_MASK) |
++ (func << PCICFG_FUN_SHIFT) |
++ (off & ~3);
++ }
++ } else {
++ /* Type 1 transaction */
++ W_REG(osh, &regs->sbtopci1, SBTOPCI_CFG1);
++ addr = SB_PCI_CFG |
++ (bus << PCICFG_BUS_SHIFT) |
++ (dev << PCICFG_SLOT_SHIFT) |
++ (func << PCICFG_FUN_SHIFT) |
++ (off & ~3);
++ }
++
++ sb_setcoreidx(sbh, coreidx);
++
++ return addr;
++}
++
++/*
++ * Read host bridge PCI config registers from Silicon Backplane (>=rev8).
++ *
++ * It returns TRUE to indicate that access to the host bridge's pci config
++ * from SB is ok, and values in 'addr' and 'val' are valid.
++ *
++ * It can only read registers at multiple of 4-bytes. Callers must pick up
++ * needed bytes from 'val' based on 'off' value. Value in 'addr' reflects
++ * the register address where value in 'val' is read.
++ */
++static bool
++sb_pcihb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off,
++ uint32 **addr, uint32 *val)
++{
++ sbpciregs_t *regs;
++ osl_t *osh;
++ uint coreidx;
++ bool ret = FALSE;
++
++ /* sanity check */
++ ASSERT(bus == 1);
++ ASSERT(dev == pci_hbslot);
++ ASSERT(func == 0);
++
++ osh = sb_osh(sbh);
++
++ /* read pci config when core rev >= 8 */
++ coreidx = sb_coreidx(sbh);
++ regs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0);
++ if (regs && sb_corerev(sbh) >= PCI_HBSBCFG_REV) {
++ *addr = (uint32 *)&regs->pcicfg[func][off >> 2];
++ *val = R_REG(osh, *addr);
++ ret = TRUE;
++ }
++ sb_setcoreidx(sbh, coreidx);
++
++ return ret;
++}
++
++int
++extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++ uint32 addr = 0, *reg = NULL, val;
++ int ret = 0;
++
++ /*
++ * Set value to -1 when:
++ * flag 'pci_disabled' is true;
++ * value of 'addr' is zero;
++ * REG_MAP() fails;
++ * BUSPROBE() fails;
++ */
++ if (pci_disabled)
++ val = 0xffffffff;
++ else if (bus == 1 && dev == pci_hbslot && func == 0 &&
++ sb_pcihb_read_config(sbh, bus, dev, func, off, &reg, &val))
++ ;
++ else if (((addr = config_cmd(sbh, bus, dev, func, off)) == 0) ||
++ ((reg = (uint32 *)REG_MAP(addr, len)) == 0) ||
++ (BUSPROBE(val, reg) != 0))
++ val = 0xffffffff;
++
++ PCI_MSG(("%s: 0x%x <= 0x%p(0x%x), len %d, off 0x%x, buf 0x%p\n",
++ __FUNCTION__, val, reg, addr, len, off, buf));
++
++ val >>= 8 * (off & 3);
++ if (len == 4)
++ *((uint32 *) buf) = val;
++ else if (len == 2)
++ *((uint16 *) buf) = (uint16) val;
++ else if (len == 1)
++ *((uint8 *) buf) = (uint8) val;
++ else
++ ret = -1;
++
++ if (reg && addr)
++ REG_UNMAP(reg);
++
++ return ret;
++}
++
++int
++extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++ osl_t *osh;
++ uint32 addr = 0, *reg = NULL, val;
++ int ret = 0;
++
++ osh = sb_osh(sbh);
++
++ /*
++ * Ignore write attempt when:
++ * flag 'pci_disabled' is true;
++ * value of 'addr' is zero;
++ * REG_MAP() fails;
++ * BUSPROBE() fails;
++ */
++ if (pci_disabled)
++ return 0;
++ else if (bus == 1 && dev == pci_hbslot && func == 0 &&
++ sb_pcihb_read_config(sbh, bus, dev, func, off, &reg, &val))
++ ;
++ else if (((addr = config_cmd(sbh, bus, dev, func, off)) == 0) ||
++ ((reg = (uint32 *) REG_MAP(addr, len)) == 0) ||
++ (BUSPROBE(val, reg) != 0))
++ goto done;
++
++ if (len == 4)
++ val = *((uint32 *) buf);
++ else if (len == 2) {
++ val &= ~(0xffff << (8 * (off & 3)));
++ val |= *((uint16 *) buf) << (8 * (off & 3));
++ } else if (len == 1) {
++ val &= ~(0xff << (8 * (off & 3)));
++ val |= *((uint8 *) buf) << (8 * (off & 3));
++ } else {
++ ret = -1;
++ goto done;
++ }
++
++ PCI_MSG(("%s: 0x%x => 0x%p\n", __FUNCTION__, val, reg));
++
++ W_REG(osh, reg, val);
++
++done:
++ if (reg && addr)
++ REG_UNMAP(reg);
++
++ return ret;
++}
++
++/*
++ * Must access emulated PCI configuration at these locations even when
++ * the real PCI config space exists and is accessible.
++ *
++ * PCI_CFG_VID (0x00)
++ * PCI_CFG_DID (0x02)
++ * PCI_CFG_PROGIF (0x09)
++ * PCI_CFG_SUBCL (0x0a)
++ * PCI_CFG_BASECL (0x0b)
++ * PCI_CFG_HDR (0x0e)
++ * PCI_CFG_INT (0x3c)
++ * PCI_CFG_PIN (0x3d)
++ */
++#define FORCE_EMUCFG(off, len) \
++ ((off == PCI_CFG_VID) || (off == PCI_CFG_DID) || \
++ (off == PCI_CFG_PROGIF) || \
++ (off == PCI_CFG_SUBCL) || (off == PCI_CFG_BASECL) || \
++ (off == PCI_CFG_HDR) || \
++ (off == PCI_CFG_INT) || (off == PCI_CFG_PIN))
++
++/* Sync the emulation registers and the real PCI config registers. */
++static void
++sb_pcid_read_config(sb_t *sbh, uint coreidx, sb_pci_cfg_t *cfg,
++ uint off, uint len)
++{
++ osl_t *osh;
++ uint oldidx;
++
++ ASSERT(cfg);
++ ASSERT(cfg->emu);
++ ASSERT(cfg->pci);
++
++ /* decide if real PCI config register access is necessary */
++ if (FORCE_EMUCFG(off, len))
++ return;
++
++ osh = sb_osh(sbh);
++
++ /* access to the real pci config space only when the core is up */
++ oldidx = sb_coreidx(sbh);
++ sb_setcoreidx(sbh, coreidx);
++ if (sb_iscoreup(sbh)) {
++ if (len == 4)
++ *(uint32 *)((ulong)cfg->emu + off) =
++ htol32(R_REG(osh, (uint32 *)((ulong)cfg->pci + off)));
++ else if (len == 2)
++ *(uint16 *)((ulong)cfg->emu + off) =
++ htol16(R_REG(osh, (uint16 *)((ulong)cfg->pci + off)));
++ else if (len == 1)
++ *(uint8 *)((ulong)cfg->emu + off) =
++ R_REG(osh, (uint8 *)((ulong)cfg->pci + off));
++ }
++ sb_setcoreidx(sbh, oldidx);
++}
++
++static void
++sb_pcid_write_config(sb_t *sbh, uint coreidx, sb_pci_cfg_t *cfg,
++ uint off, uint len)
++{
++ osl_t *osh;
++ uint oldidx;
++
++ ASSERT(cfg);
++ ASSERT(cfg->emu);
++ ASSERT(cfg->pci);
++
++ osh = sb_osh(sbh);
++
++ /* decide if real PCI config register access is necessary */
++ if (FORCE_EMUCFG(off, len))
++ return;
++
++ /* access to the real pci config space only when the core is up */
++ oldidx = sb_coreidx(sbh);
++ sb_setcoreidx(sbh, coreidx);
++ if (sb_iscoreup(sbh)) {
++ if (len == 4)
++ W_REG(osh, (uint32 *)((ulong)cfg->pci + off),
++ ltoh32(*(uint32 *)((ulong)cfg->emu + off)));
++ else if (len == 2)
++ W_REG(osh, (uint16 *)((ulong)cfg->pci + off),
++ ltoh16(*(uint16 *)((ulong)cfg->emu + off)));
++ else if (len == 1)
++ W_REG(osh, (uint8 *)((ulong)cfg->pci + off),
++ *(uint8 *)((ulong)cfg->emu + off));
++ }
++ sb_setcoreidx(sbh, oldidx);
++}
++
++/*
++ * Functions for accessing translated SB configuration space
++ */
++static int
++sb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++ pci_config_regs *cfg;
++
++ if (dev >= SB_MAXCORES || func >= MAXFUNCS || (off + len) > sizeof(pci_config_regs))
++ return -1;
++ cfg = sb_pci_cfg[dev][func].emu;
++
++ ASSERT(ISALIGNED(off, len));
++ ASSERT(ISALIGNED((uintptr)buf, len));
++
++ /* use special config space if the device does not exist */
++ if (!cfg)
++ cfg = &sb_pci_null;
++ /* sync emulation with real PCI config if necessary */
++ else if (sb_pci_cfg[dev][func].pci)
++ sb_pcid_read_config(sbh, dev, &sb_pci_cfg[dev][func], off, len);
++
++ if (len == 4)
++ *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off)));
++ else if (len == 2)
++ *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off)));
++ else if (len == 1)
++ *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off));
++ else
++ return -1;
++
++ return 0;
++}
++
++static int
++sb_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++ uint coreidx;
++ void *regs;
++ pci_config_regs *cfg;
++ osl_t *osh;
++ sb_bar_cfg_t *bar;
++
++ if (dev >= SB_MAXCORES || func >= MAXFUNCS || (off + len) > sizeof(pci_config_regs))
++ return -1;
++ cfg = sb_pci_cfg[dev][func].emu;
++ if (!cfg)
++ return -1;
++
++ ASSERT(ISALIGNED(off, len));
++ ASSERT(ISALIGNED((uintptr)buf, len));
++
++ osh = sb_osh(sbh);
++
++ /* Emulate BAR sizing */
++ if (off >= OFFSETOF(pci_config_regs, base[0]) &&
++ off <= OFFSETOF(pci_config_regs, base[3]) &&
++ len == 4 && *((uint32 *) buf) == ~0) {
++ coreidx = sb_coreidx(sbh);
++ if ((regs = sb_setcoreidx(sbh, dev))) {
++ bar = sb_pci_cfg[dev][func].bar;
++ /* Highest numbered address match register */
++ if (off == OFFSETOF(pci_config_regs, base[0]))
++ cfg->base[0] = ~(bar->size0 - 1);
++ else if (off == OFFSETOF(pci_config_regs, base[1]) && bar->n >= 1)
++ cfg->base[1] = ~(bar->size1 - 1);
++ else if (off == OFFSETOF(pci_config_regs, base[2]) && bar->n >= 2)
++ cfg->base[2] = ~(bar->size2 - 1);
++ else if (off == OFFSETOF(pci_config_regs, base[3]) && bar->n >= 3)
++ cfg->base[3] = ~(bar->size3 - 1);
++ }
++ sb_setcoreidx(sbh, coreidx);
++ }
++ else if (len == 4)
++ *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf));
++ else if (len == 2)
++ *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf));
++ else if (len == 1)
++ *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf);
++ else
++ return -1;
++
++ /* sync emulation with real PCI config if necessary */
++ if (sb_pci_cfg[dev][func].pci)
++ sb_pcid_write_config(sbh, dev, &sb_pci_cfg[dev][func], off, len);
++
++ return 0;
++}
++
++int
++sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++ if (bus == 0)
++ return sb_read_config(sbh, bus, dev, func, off, buf, len);
++ else
++ return extpci_read_config(sbh, bus, dev, func, off, buf, len);
++}
++
++int
++sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++ if (bus == 0)
++ return sb_write_config(sbh, bus, dev, func, off, buf, len);
++ else
++ return extpci_write_config(sbh, bus, dev, func, off, buf, len);
++}
++
++void
++sbpci_ban(uint16 core)
++{
++ if (pci_banned < ARRAYSIZE(pci_ban))
++ pci_ban[pci_banned++] = core;
++}
++
++/*
++ * Initiliaze PCI core. Return 0 after a successful initialization.
++ * Otherwise return -1 to indicate there is no PCI core and return 1
++ * to indicate PCI core is disabled.
++ */
++int __init
++sbpci_init_pci(sb_t *sbh)
++{
++ uint chip, chiprev, chippkg, host;
++ uint32 boardflags;
++ sbpciregs_t *pci;
++ sbconfig_t *sb;
++ uint32 val;
++ int ret = 0;
++ char *hbslot;
++ osl_t *osh;
++
++ chip = sb_chip(sbh);
++ chiprev = sb_chiprev(sbh);
++ chippkg = sb_chippkg(sbh);
++
++ osh = sb_osh(sbh);
++
++ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) {
++ printk("PCI: no core\n");
++ pci_disabled = TRUE;
++ return -1;
++ }
++
++ if ((chip == 0x4310) && (chiprev == 0))
++ pci_disabled = TRUE;
++
++ sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF);
++
++ boardflags = (uint32) getintvar(NULL, "boardflags");
++
++ /*
++ * The 200-pin BCM4712 package does not bond out PCI. Even when
++ * PCI is bonded out, some boards may leave the pins
++ * floating.
++ */
++ if (((chip == BCM4712_CHIP_ID) &&
++ ((chippkg == BCM4712SMALL_PKG_ID) ||
++ (chippkg == BCM4712MID_PKG_ID))) ||
++ (boardflags & BFL_NOPCI))
++ pci_disabled = TRUE;
++
++ /* Enable the core */
++ sb_core_reset(sbh, 0, 0);
++
++ /*
++ * If the PCI core should not be touched (disabled, not bonded
++ * out, or pins floating), do not even attempt to access core
++ * registers. Otherwise, try to determine if it is in host
++ * mode.
++ */
++ if (pci_disabled)
++ host = 0;
++ else
++ host = !BUSPROBE(val, &pci->control);
++
++ if (!host) {
++ ret = 1;
++
++ /* Disable PCI interrupts in client mode */
++ W_REG(osh, &sb->sbintvec, 0);
++
++ /* Disable the PCI bridge in client mode */
++ sbpci_ban(SB_PCI);
++ sb_core_disable(sbh, 0);
++
++ printk("PCI: Disabled\n");
++ } else {
++ printk("PCI: Initializing host\n");
++
++ /* Disable PCI SBReqeustTimeout for BCM4785 */
++ if (chip == BCM4785_CHIP_ID) {
++ AND_REG(osh, &sb->sbimconfiglow, ~0x00000070);
++ sb_commit(sbh);
++ }
++
++ /* Reset the external PCI bus and enable the clock */
++ W_REG(osh, &pci->control, 0x5); /* enable the tristate drivers */
++ W_REG(osh, &pci->control, 0xd); /* enable the PCI clock */
++ OSL_DELAY(150); /* delay > 100 us */
++ W_REG(osh, &pci->control, 0xf); /* deassert PCI reset */
++ /* Use internal arbiter and park REQ/GRNT at external master 0 */
++ W_REG(osh, &pci->arbcontrol, PCI_INT_ARB);
++ OSL_DELAY(1); /* delay 1 us */
++ if (sb_corerev(sbh) >= 8) {
++ val = getintvar(NULL, "parkid");
++ ASSERT(val <= PCI_PARKID_LAST);
++ OR_REG(osh, &pci->arbcontrol, val << PCI_PARKID_SHIFT);
++ OSL_DELAY(1);
++ }
++
++ /* Enable CardBusMode */
++ cardbus = getintvar(NULL, "cardbus") == 1;
++ if (cardbus) {
++ printk("PCI: Enabling CardBus\n");
++ /* GPIO 1 resets the CardBus device on bcm94710ap */
++ sb_gpioout(sbh, 1, 1, GPIO_DRV_PRIORITY);
++ sb_gpioouten(sbh, 1, 1, GPIO_DRV_PRIORITY);
++ W_REG(osh, &pci->sprom[0], R_REG(osh, &pci->sprom[0]) | 0x400);
++ }
++
++ /* 64 MB I/O access window */
++ W_REG(osh, &pci->sbtopci0, SBTOPCI_IO);
++ /* 64 MB configuration access window */
++ W_REG(osh, &pci->sbtopci1, SBTOPCI_CFG0);
++ /* 1 GB memory access window */
++ W_REG(osh, &pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA);
++
++ /* Host bridge slot # nvram overwrite */
++ if ((hbslot = nvram_get("pcihbslot"))) {
++ pci_hbslot = bcm_strtoul(hbslot, NULL, 0);
++ ASSERT(pci_hbslot < PCI_MAX_DEVICES);
++ }
++
++ /* Enable PCI bridge BAR0 prefetch and burst */
++ val = 6;
++ sbpci_write_config(sbh, 1, pci_hbslot, 0, PCI_CFG_CMD, &val, sizeof(val));
++
++ /* Enable PCI interrupts */
++ W_REG(osh, &pci->intmask, PCI_INTA);
++ }
++
++ return ret;
++}
++
++/*
++ * Get the PCI region address and size information.
++ */
++static void __init
++sbpci_init_regions(sb_t *sbh, uint func, pci_config_regs *cfg, sb_bar_cfg_t *bar)
++{
++ osl_t *osh;
++ uint16 coreid;
++ void *regs;
++ sbconfig_t *sb;
++ uint32 base;
++
++ osh = sb_osh(sbh);
++ coreid = sb_coreid(sbh);
++ regs = sb_coreregs(sbh);
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++
++ switch (coreid) {
++ case SB_USB20H:
++ base = htol32(sb_base(R_REG(osh, &sb->sbadmatch0)));
++
++ cfg->base[0] = func == 0 ? base : base + 0x800; /* OHCI/EHCI */
++ cfg->base[1] = 0;
++ cfg->base[2] = 0;
++ cfg->base[3] = 0;
++ cfg->base[4] = 0;
++ cfg->base[5] = 0;
++ bar->n = 1;
++ bar->size0 = func == 0 ? 0x200 : 0x100; /* OHCI/EHCI */
++ bar->size1 = 0;
++ bar->size2 = 0;
++ bar->size3 = 0;
++ break;
++ default:
++ cfg->base[0] = htol32(sb_base(R_REG(osh, &sb->sbadmatch0)));
++ cfg->base[1] = htol32(sb_base(R_REG(osh, &sb->sbadmatch1)));
++ cfg->base[2] = htol32(sb_base(R_REG(osh, &sb->sbadmatch2)));
++ cfg->base[3] = htol32(sb_base(R_REG(osh, &sb->sbadmatch3)));
++ cfg->base[4] = 0;
++ cfg->base[5] = 0;
++ bar->n = (R_REG(osh, &sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT;
++ bar->size0 = sb_size(R_REG(osh, &sb->sbadmatch0));
++ bar->size1 = sb_size(R_REG(osh, &sb->sbadmatch1));
++ bar->size2 = sb_size(R_REG(osh, &sb->sbadmatch2));
++ bar->size3 = sb_size(R_REG(osh, &sb->sbadmatch3));
++ break;
++ }
++}
++
++/*
++ * Construct PCI config spaces for SB cores so that they
++ * can be accessed as if they were PCI devices.
++ */
++static void __init
++sbpci_init_cores(sb_t *sbh)
++{
++ uint chiprev, coreidx, i;
++ sbconfig_t *sb;
++ pci_config_regs *cfg, *pci;
++ sb_bar_cfg_t *bar;
++ void *regs;
++ osl_t *osh;
++ uint16 vendor, device;
++ uint16 coreid;
++ uint8 class, subclass, progif;
++ uint dev;
++ uint8 header;
++ uint func;
++
++ chiprev = sb_chiprev(sbh);
++ coreidx = sb_coreidx(sbh);
++
++ osh = sb_osh(sbh);
++
++ /* Scan the SB bus */
++ bzero(sb_config_regs, sizeof(sb_config_regs));
++ bzero(sb_bar_cfg, sizeof(sb_bar_cfg));
++ bzero(sb_pci_cfg, sizeof(sb_pci_cfg));
++ memset(&sb_pci_null, -1, sizeof(sb_pci_null));
++ cfg = sb_config_regs;
++ bar = sb_bar_cfg;
++ for (dev = 0; dev < SB_MAXCORES; dev ++) {
++ /* Check if the core exists */
++ if (!(regs = sb_setcoreidx(sbh, dev)))
++ continue;
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++
++ /* Check if this core is banned */
++ coreid = sb_coreid(sbh);
++ for (i = 0; i < pci_banned; i++)
++ if (coreid == pci_ban[i])
++ break;
++ if (i < pci_banned)
++ continue;
++
++ for (func = 0; func < MAXFUNCS; ++func) {
++ /* Make sure we won't go beyond the limit */
++ if (cfg >= &sb_config_regs[SB_MAXCORES]) {
++ printk("PCI: too many emulated devices\n");
++ goto done;
++ }
++
++ /* Convert core id to pci id */
++ if (sb_corepciid(sbh, func, &vendor, &device, &class, &subclass,
++ &progif, &header))
++ continue;
++
++ /*
++ * Differentiate real PCI config from emulated.
++ * non zero 'pci' indicate there is a real PCI config space
++ * for this device.
++ */
++ switch (device) {
++ case BCM47XX_GIGETH_ID:
++ pci = (pci_config_regs *)((uint32)regs + 0x800);
++ break;
++ case BCM47XX_SATAXOR_ID:
++ pci = (pci_config_regs *)((uint32)regs + 0x400);
++ break;
++ case BCM47XX_ATA100_ID:
++ pci = (pci_config_regs *)((uint32)regs + 0x800);
++ break;
++ default:
++ pci = NULL;
++ break;
++ }
++ /* Supported translations */
++ cfg->vendor = htol16(vendor);
++ cfg->device = htol16(device);
++ cfg->rev_id = chiprev;
++ cfg->prog_if = progif;
++ cfg->sub_class = subclass;
++ cfg->base_class = class;
++ cfg->header_type = header;
++ sbpci_init_regions(sbh, func, cfg, bar);
++ /* Save core interrupt flag */
++ cfg->int_pin = R_REG(osh, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
++ /* Save core interrupt assignment */
++ cfg->int_line = sb_irq(sbh);
++ /* Indicate there is no SROM */
++ *((uint32 *) &cfg->sprom_control) = 0xffffffff;
++
++ /* Point to the PCI config spaces */
++ sb_pci_cfg[dev][func].emu = cfg;
++ sb_pci_cfg[dev][func].pci = pci;
++ sb_pci_cfg[dev][func].bar = bar;
++ cfg ++;
++ bar ++;
++ }
++ }
++
++done:
++ sb_setcoreidx(sbh, coreidx);
++}
++
++/*
++ * Initialize PCI core and construct PCI config spaces for SB cores.
++ * Must propagate sbpci_init_pci() return value to the caller to let
++ * them know the PCI core initialization status.
++ */
++int __init
++sbpci_init(sb_t *sbh)
++{
++ int status = sbpci_init_pci(sbh);
++ sbpci_init_cores(sbh);
++ return status;
++}
++
+diff -urN linux.old/arch/mips/bcm947xx/sbutils.c linux.dev/arch/mips/bcm947xx/sbutils.c
+--- linux.old/arch/mips/bcm947xx/sbutils.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/sbutils.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,3081 @@
++/*
++ * Misc utility routines for accessing chip-specific features
++ * of the SiliconBackplane-based Broadcom chips.
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id: sbutils.c,v 1.10 2006/04/08 07:12:42 honor Exp $
++ */
++
++#include <typedefs.h>
++#include <bcmdefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <sbutils.h>
++#include <bcmdevs.h>
++#include <sbconfig.h>
++#include <sbchipc.h>
++#include <sbpci.h>
++#include <sbpcie.h>
++#include <pcicfg.h>
++#include <sbpcmcia.h>
++#include <sbextif.h>
++#include <sbsocram.h>
++#include <bcmsrom.h>
++#ifdef __mips__
++#include <mipsinc.h>
++#endif /* __mips__ */
++
++/* debug/trace */
++#define SB_ERROR(args)
++
++typedef uint32 (*sb_intrsoff_t)(void *intr_arg);
++typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg);
++typedef bool (*sb_intrsenabled_t)(void *intr_arg);
++
++/* misc sb info needed by some of the routines */
++typedef struct sb_info {
++
++ struct sb_pub sb; /* back plane public state (must be first field) */
++
++ void *osh; /* osl os handle */
++ void *sdh; /* bcmsdh handle */
++
++ void *curmap; /* current regs va */
++ void *regs[SB_MAXCORES]; /* other regs va */
++
++ uint curidx; /* current core index */
++ uint dev_coreid; /* the core provides driver functions */
++
++ bool memseg; /* flag to toggle MEM_SEG register */
++
++ uint gpioidx; /* gpio control core index */
++ uint gpioid; /* gpio control coretype */
++
++ uint numcores; /* # discovered cores */
++ uint coreid[SB_MAXCORES]; /* id of each core */
++
++ void *intr_arg; /* interrupt callback function arg */
++ sb_intrsoff_t intrsoff_fn; /* turns chip interrupts off */
++ sb_intrsrestore_t intrsrestore_fn; /* restore chip interrupts */
++ sb_intrsenabled_t intrsenabled_fn; /* check if interrupts are enabled */
++
++} sb_info_t;
++
++/* local prototypes */
++static sb_info_t * sb_doattach(sb_info_t *si, uint devid, osl_t *osh, void *regs,
++ uint bustype, void *sdh, char **vars, uint *varsz);
++static void sb_scan(sb_info_t *si);
++static uint sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val);
++static uint _sb_coreidx(sb_info_t *si);
++static uint sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit);
++static uint sb_pcidev2chip(uint pcidev);
++static uint sb_chip2numcores(uint chip);
++static bool sb_ispcie(sb_info_t *si);
++static bool sb_find_pci_capability(sb_info_t *si, uint8 req_cap_id, uchar *buf, uint32 *buflen);
++static int sb_pci_fixcfg(sb_info_t *si);
++
++/* routines to access mdio slave device registers */
++static int sb_pcie_mdiowrite(sb_info_t *si, uint physmedia, uint readdr, uint val);
++static void sb_war30841(sb_info_t *si);
++
++/* delay needed between the mdio control/ mdiodata register data access */
++#define PR28829_DELAY() OSL_DELAY(10)
++
++/* size that can take bitfielddump */
++#define BITFIELD_DUMP_SIZE 32
++
++/* global variable to indicate reservation/release of gpio's */
++static uint32 sb_gpioreservation = 0;
++
++#define SB_INFO(sbh) (sb_info_t*)sbh
++#define SET_SBREG(si, r, mask, val) \
++ W_SBREG((si), (r), ((R_SBREG((si), (r)) & ~(mask)) | (val)))
++#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && \
++ ISALIGNED((x), SB_CORE_SIZE))
++#define GOODREGS(regs) ((regs) && ISALIGNED((uintptr)(regs), SB_CORE_SIZE))
++#define REGS2SB(va) (sbconfig_t*) ((int8*)(va) + SBCONFIGOFF)
++#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES)
++#define BADIDX (SB_MAXCORES+1)
++#define NOREV -1 /* Invalid rev */
++
++#define PCI(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCI))
++#define PCIE(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCIE))
++
++/* sonicsrev */
++#define SONICS_2_2 (SBIDL_RV_2_2 >> SBIDL_RV_SHIFT)
++#define SONICS_2_3 (SBIDL_RV_2_3 >> SBIDL_RV_SHIFT)
++
++#define R_SBREG(si, sbr) sb_read_sbreg((si), (sbr))
++#define W_SBREG(si, sbr, v) sb_write_sbreg((si), (sbr), (v))
++#define AND_SBREG(si, sbr, v) W_SBREG((si), (sbr), (R_SBREG((si), (sbr)) & (v)))
++#define OR_SBREG(si, sbr, v) W_SBREG((si), (sbr), (R_SBREG((si), (sbr)) | (v)))
++
++/*
++ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
++ * after core switching to avoid invalid register accesss inside ISR.
++ */
++#define INTR_OFF(si, intr_val) \
++ if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
++ intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
++#define INTR_RESTORE(si, intr_val) \
++ if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
++ (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
++
++/* dynamic clock control defines */
++#define LPOMINFREQ 25000 /* low power oscillator min */
++#define LPOMAXFREQ 43000 /* low power oscillator max */
++#define XTALMINFREQ 19800000 /* 20 MHz - 1% */
++#define XTALMAXFREQ 20200000 /* 20 MHz + 1% */
++#define PCIMINFREQ 25000000 /* 25 MHz */
++#define PCIMAXFREQ 34000000 /* 33 MHz + fudge */
++
++#define ILP_DIV_5MHZ 0 /* ILP = 5 MHz */
++#define ILP_DIV_1MHZ 4 /* ILP = 1 MHz */
++
++/* different register spaces to access thr'u pcie indirect access */
++#define PCIE_CONFIGREGS 1 /* Access to config space */
++#define PCIE_PCIEREGS 2 /* Access to pcie registers */
++
++/* GPIO Based LED powersave defines */
++#define DEFAULT_GPIO_ONTIME 10 /* Default: 10% on */
++#define DEFAULT_GPIO_OFFTIME 90 /* Default: 10% on */
++
++#define DEFAULT_GPIOTIMERVAL ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME)
++
++static uint32
++sb_read_sbreg(sb_info_t *si, volatile uint32 *sbr)
++{
++ uint8 tmp;
++ uint32 val, intr_val = 0;
++
++
++ /*
++ * compact flash only has 11 bits address, while we needs 12 bits address.
++ * MEM_SEG will be OR'd with other 11 bits address in hardware,
++ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
++ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
++ */
++ if (si->memseg) {
++ INTR_OFF(si, intr_val);
++ tmp = 1;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++ sbr = (volatile uint32 *)((uintptr)sbr & ~(1 << 11)); /* mask out bit 11 */
++ }
++
++ val = R_REG(si->osh, sbr);
++
++ if (si->memseg) {
++ tmp = 0;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++ INTR_RESTORE(si, intr_val);
++ }
++
++ return (val);
++}
++
++static void
++sb_write_sbreg(sb_info_t *si, volatile uint32 *sbr, uint32 v)
++{
++ uint8 tmp;
++ volatile uint32 dummy;
++ uint32 intr_val = 0;
++
++
++ /*
++ * compact flash only has 11 bits address, while we needs 12 bits address.
++ * MEM_SEG will be OR'd with other 11 bits address in hardware,
++ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
++ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
++ */
++ if (si->memseg) {
++ INTR_OFF(si, intr_val);
++ tmp = 1;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++ sbr = (volatile uint32 *)((uintptr)sbr & ~(1 << 11)); /* mask out bit 11 */
++ }
++
++ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
++#ifdef IL_BIGENDIAN
++ dummy = R_REG(si->osh, sbr);
++ W_REG(si->osh, ((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff));
++ dummy = R_REG(si->osh, sbr);
++ W_REG(si->osh, (volatile uint16 *)sbr, (uint16)(v & 0xffff));
++#else
++ dummy = R_REG(si->osh, sbr);
++ W_REG(si->osh, (volatile uint16 *)sbr, (uint16)(v & 0xffff));
++ dummy = R_REG(si->osh, sbr);
++ W_REG(si->osh, ((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff));
++#endif /* IL_BIGENDIAN */
++ } else
++ W_REG(si->osh, sbr, v);
++
++ if (si->memseg) {
++ tmp = 0;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++ INTR_RESTORE(si, intr_val);
++ }
++}
++
++/*
++ * Allocate a sb handle.
++ * devid - pci device id (used to determine chip#)
++ * osh - opaque OS handle
++ * regs - virtual address of initial core registers
++ * bustype - pci/pcmcia/sb/sdio/etc
++ * vars - pointer to a pointer area for "environment" variables
++ * varsz - pointer to int to return the size of the vars
++ */
++sb_t *
++BCMINITFN(sb_attach)(uint devid, osl_t *osh, void *regs,
++ uint bustype, void *sdh, char **vars, uint *varsz)
++{
++ sb_info_t *si;
++
++ /* alloc sb_info_t */
++ if ((si = MALLOC(osh, sizeof (sb_info_t))) == NULL) {
++ SB_ERROR(("sb_attach: malloc failed! malloced %d bytes\n", MALLOCED(osh)));
++ return (NULL);
++ }
++
++ if (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, (uint*)varsz) == NULL) {
++ MFREE(osh, si, sizeof(sb_info_t));
++ return (NULL);
++ }
++
++ return (sb_t *)si;
++}
++
++/* Using sb_kattach depends on SB_BUS support, either implicit */
++/* no limiting BCMBUSTYPE value) or explicit (value is SB_BUS). */
++#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS)
++
++/* global kernel resource */
++static sb_info_t ksi;
++static bool ksi_attached = FALSE;
++
++/* generic kernel variant of sb_attach() */
++sb_t *
++BCMINITFN(sb_kattach)(void)
++{
++ osl_t *osh = NULL;
++ uint32 *regs;
++
++ if (!ksi_attached) {
++ uint32 cid;
++
++ regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE);
++ cid = R_REG(osh, (uint32 *)regs);
++ if (((cid & CID_ID_MASK) == BCM4712_CHIP_ID) &&
++ ((cid & CID_PKG_MASK) != BCM4712LARGE_PKG_ID) &&
++ ((cid & CID_REV_MASK) <= (3 << CID_REV_SHIFT))) {
++ uint32 *scc, val;
++
++ scc = (uint32 *)((uchar*)regs + OFFSETOF(chipcregs_t, slow_clk_ctl));
++ val = R_REG(osh, scc);
++ SB_ERROR((" initial scc = 0x%x\n", val));
++ val |= SCC_SS_XTAL;
++ W_REG(osh, scc, val);
++ }
++
++ if (sb_doattach(&ksi, BCM4710_DEVICE_ID, osh, (void*)regs,
++ SB_BUS, NULL, NULL, NULL) == NULL) {
++ return NULL;
++ }
++ else
++ ksi_attached = TRUE;
++ }
++
++ return (sb_t *)&ksi;
++}
++#endif /* !BCMBUSTYPE || (BCMBUSTYPE == SB_BUS) */
++
++static sb_info_t *
++BCMINITFN(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs,
++ uint bustype, void *sdh, char **vars, uint *varsz)
++{
++ uint origidx;
++ chipcregs_t *cc;
++ sbconfig_t *sb;
++ uint32 w;
++
++ ASSERT(GOODREGS(regs));
++
++ bzero((uchar*)si, sizeof(sb_info_t));
++
++ si->sb.buscoreidx = si->gpioidx = BADIDX;
++
++ si->curmap = regs;
++ si->sdh = sdh;
++ si->osh = osh;
++
++ /* check to see if we are a sb core mimic'ing a pci core */
++ if (bustype == PCI_BUS) {
++ if (OSL_PCI_READ_CONFIG(si->osh, PCI_SPROM_CONTROL, sizeof(uint32)) == 0xffffffff) {
++ SB_ERROR(("%s: incoming bus is PCI but it's a lie, switching to SB "
++ "devid:0x%x\n", __FUNCTION__, devid));
++ bustype = SB_BUS;
++ }
++ }
++
++ si->sb.bustype = bustype;
++ if (si->sb.bustype != BUSTYPE(si->sb.bustype)) {
++ SB_ERROR(("sb_doattach: bus type %d does not match configured bus type %d\n",
++ si->sb.bustype, BUSTYPE(si->sb.bustype)));
++ return NULL;
++ }
++
++ /* need to set memseg flag for CF card first before any sb registers access */
++ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS)
++ si->memseg = TRUE;
++
++ /* kludge to enable the clock on the 4306 which lacks a slowclock */
++ if (BUSTYPE(si->sb.bustype) == PCI_BUS)
++ sb_clkctl_xtal(&si->sb, XTAL|PLL, ON);
++
++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
++ w = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32));
++ if (!GOODCOREADDR(w))
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32), SB_ENUM_BASE);
++ }
++
++ /* initialize current core index value */
++ si->curidx = _sb_coreidx(si);
++
++ if (si->curidx == BADIDX) {
++ SB_ERROR(("sb_doattach: bad core index\n"));
++ return NULL;
++ }
++
++ /* get sonics backplane revision */
++ sb = REGS2SB(si->curmap);
++ si->sb.sonicsrev = (R_SBREG(si, &sb->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT;
++
++ /* keep and reuse the initial register mapping */
++ origidx = si->curidx;
++ if (BUSTYPE(si->sb.bustype) == SB_BUS)
++ si->regs[origidx] = regs;
++
++ /* is core-0 a chipcommon core? */
++ si->numcores = 1;
++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, 0);
++ if (sb_coreid(&si->sb) != SB_CC)
++ cc = NULL;
++
++ /* determine chip id and rev */
++ if (cc) {
++ /* chip common core found! */
++ si->sb.chip = R_REG(si->osh, &cc->chipid) & CID_ID_MASK;
++ si->sb.chiprev = (R_REG(si->osh, &cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
++ si->sb.chippkg = (R_REG(si->osh, &cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
++ } else {
++ /* no chip common core -- must convert device id to chip id */
++ if ((si->sb.chip = sb_pcidev2chip(devid)) == 0) {
++ SB_ERROR(("sb_doattach: unrecognized device id 0x%04x\n", devid));
++ sb_setcoreidx(&si->sb, origidx);
++ return NULL;
++ }
++ }
++
++ /* get chipcommon rev */
++ si->sb.ccrev = cc ? (int)sb_corerev(&si->sb) : NOREV;
++
++ /* determine numcores */
++ if (cc && ((si->sb.ccrev == 4) || (si->sb.ccrev >= 6)))
++ si->numcores = (R_REG(si->osh, &cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
++ else
++ si->numcores = sb_chip2numcores(si->sb.chip);
++
++ /* return to original core */
++ sb_setcoreidx(&si->sb, origidx);
++
++ /* sanity checks */
++ ASSERT(si->sb.chip);
++
++ /* scan for cores */
++ sb_scan(si);
++
++ /* fixup necessary chip/core configurations */
++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
++ if (sb_pci_fixcfg(si)) {
++ SB_ERROR(("sb_doattach: sb_pci_fixcfg failed\n"));
++ return NULL;
++ }
++ }
++
++ /* srom_var_init() depends on sb_scan() info */
++ if (srom_var_init(si, si->sb.bustype, si->curmap, si->osh, vars, varsz)) {
++ SB_ERROR(("sb_doattach: srom_var_init failed: bad srom\n"));
++ return (NULL);
++ }
++
++ if (cc == NULL) {
++ /*
++ * The chip revision number is hardwired into all
++ * of the pci function config rev fields and is
++ * independent from the individual core revision numbers.
++ * For example, the "A0" silicon of each chip is chip rev 0.
++ * For PCMCIA we get it from the CIS instead.
++ */
++ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
++ ASSERT(vars);
++ si->sb.chiprev = getintvar(*vars, "chiprev");
++ } else if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
++ w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_REV, sizeof(uint32));
++ si->sb.chiprev = w & 0xff;
++ } else
++ si->sb.chiprev = 0;
++ }
++
++ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
++ w = getintvar(*vars, "regwindowsz");
++ si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE;
++ }
++
++ /* gpio control core is required */
++ if (!GOODIDX(si->gpioidx)) {
++ SB_ERROR(("sb_doattach: gpio control core not found\n"));
++ return NULL;
++ }
++
++ /* get boardtype and boardrev */
++ switch (BUSTYPE(si->sb.bustype)) {
++ case PCI_BUS:
++ /* do a pci config read to get subsystem id and subvendor id */
++ w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_SVID, sizeof(uint32));
++ si->sb.boardvendor = w & 0xffff;
++ si->sb.boardtype = (w >> 16) & 0xffff;
++ break;
++
++ case PCMCIA_BUS:
++ case SDIO_BUS:
++ si->sb.boardvendor = getintvar(*vars, "manfid");
++ si->sb.boardtype = getintvar(*vars, "prodid");
++ break;
++
++ case SB_BUS:
++ case JTAG_BUS:
++ si->sb.boardvendor = VENDOR_BROADCOM;
++ if ((si->sb.boardtype = getintvar(NULL, "boardtype")) == 0)
++ si->sb.boardtype = 0xffff;
++ break;
++ }
++
++ if (si->sb.boardtype == 0) {
++ SB_ERROR(("sb_doattach: unknown board type\n"));
++ ASSERT(si->sb.boardtype);
++ }
++
++ /* setup the GPIO based LED powersave register */
++ if (si->sb.ccrev >= 16) {
++ if ((vars == NULL) || ((w = getintvar(*vars, "leddc")) == 0))
++ w = DEFAULT_GPIOTIMERVAL;
++ sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), ~0, w);
++ }
++ if ((si->sb.chip == BCM4311_CHIP_ID) && (si->sb.chiprev <= 1)) {
++ /* set proper clk setup delays before forcing HT */
++ sb_clkctl_init((void *)si);
++ sb_corereg((void*)si, SB_CC_IDX, OFFSETOF(chipcregs_t, system_clk_ctl),
++ SYCC_HR, SYCC_HR);
++ }
++
++
++ return (si);
++}
++
++uint
++sb_coreid(sb_t *sbh)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
++
++ return ((R_SBREG(si, &sb->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
++}
++
++uint
++sb_coreidx(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ return (si->curidx);
++}
++
++/* return current index of core */
++static uint
++_sb_coreidx(sb_info_t *si)
++{
++ sbconfig_t *sb;
++ uint32 sbaddr = 0;
++
++ ASSERT(si);
++
++ switch (BUSTYPE(si->sb.bustype)) {
++ case SB_BUS:
++ sb = REGS2SB(si->curmap);
++ sbaddr = sb_base(R_SBREG(si, &sb->sbadmatch0));
++ break;
++
++ case PCI_BUS:
++ sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32));
++ break;
++
++ case PCMCIA_BUS: {
++ uint8 tmp = 0;
++
++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
++ sbaddr = (uint)tmp << 12;
++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
++ sbaddr |= (uint)tmp << 16;
++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
++ sbaddr |= (uint)tmp << 24;
++ break;
++ }
++
++#ifdef BCMJTAG
++ case JTAG_BUS:
++ sbaddr = (uint32)si->curmap;
++ break;
++#endif /* BCMJTAG */
++
++ default:
++ ASSERT(0);
++ }
++
++ if (!GOODCOREADDR(sbaddr))
++ return BADIDX;
++
++ return ((sbaddr - SB_ENUM_BASE) / SB_CORE_SIZE);
++}
++
++uint
++sb_corevendor(sb_t *sbh)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
++
++ return ((R_SBREG(si, &sb->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
++}
++
++uint
++sb_corerev(sb_t *sbh)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++ uint sbidh;
++
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
++ sbidh = R_SBREG(si, &sb->sbidhigh);
++
++ return (SBCOREREV(sbidh));
++}
++
++void *
++sb_osh(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ return si->osh;
++}
++
++void
++sb_setosh(sb_t *sbh, osl_t *osh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ if (si->osh != NULL) {
++ SB_ERROR(("osh is already set....\n"));
++ ASSERT(!si->osh);
++ }
++ si->osh = osh;
++}
++
++/* set/clear sbtmstatelow core-specific flags */
++uint32
++sb_coreflags(sb_t *sbh, uint32 mask, uint32 val)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++ uint32 w;
++
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
++
++ ASSERT((val & ~mask) == 0);
++
++ /* mask and set */
++ if (mask || val) {
++ w = (R_SBREG(si, &sb->sbtmstatelow) & ~mask) | val;
++ W_SBREG(si, &sb->sbtmstatelow, w);
++ }
++
++ /* return the new value */
++ return (R_SBREG(si, &sb->sbtmstatelow));
++}
++
++/* set/clear sbtmstatehigh core-specific flags */
++uint32
++sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++ uint32 w;
++
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
++
++ ASSERT((val & ~mask) == 0);
++ ASSERT((mask & ~SBTMH_FL_MASK) == 0);
++
++ /* mask and set */
++ if (mask || val) {
++ w = (R_SBREG(si, &sb->sbtmstatehigh) & ~mask) | val;
++ W_SBREG(si, &sb->sbtmstatehigh, w);
++ }
++
++ /* return the new value */
++ return (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
++}
++
++/* Run bist on current core. Caller needs to take care of core-specific bist hazards */
++int
++sb_corebist(sb_t *sbh)
++{
++ uint32 sblo;
++ sb_info_t *si;
++ sbconfig_t *sb;
++ int result = 0;
++
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
++
++ sblo = R_SBREG(si, &sb->sbtmstatelow);
++ W_SBREG(si, &sb->sbtmstatelow, (sblo | SBTML_FGC | SBTML_BE));
++
++ SPINWAIT(((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BISTD) == 0), 100000);
++
++ if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BISTF)
++ result = BCME_ERROR;
++
++ W_SBREG(si, &sb->sbtmstatelow, sblo);
++
++ return result;
++}
++
++bool
++sb_iscoreup(sb_t *sbh)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
++
++ return ((R_SBREG(si, &sb->sbtmstatelow) &
++ (SBTML_RESET | SBTML_REJ_MASK | SBTML_CLK)) == SBTML_CLK);
++}
++
++/*
++ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
++ * switch back to the original core, and return the new value.
++ *
++ * When using the silicon backplane, no fidleing with interrupts or core switches are needed.
++ *
++ * Also, when using pci/pcie, we can optimize away the core switching for pci registers
++ * and (on newer pci cores) chipcommon registers.
++ */
++static uint
++sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val)
++{
++ uint origidx = 0;
++ uint32 *r = NULL;
++ uint w;
++ uint intr_val = 0;
++ bool fast = FALSE;
++
++ ASSERT(GOODIDX(coreidx));
++ ASSERT(regoff < SB_CORE_SIZE);
++ ASSERT((val & ~mask) == 0);
++
++#ifdef notyet
++ if (si->sb.bustype == SB_BUS) {
++ /* If internal bus, we can always get at everything */
++ fast = TRUE;
++ r = (uint32 *)((uchar *)si->regs[coreidx] + regoff);
++ } else if (si->sb.bustype == PCI_BUS) {
++ /* If pci/pcie, we can get at pci/pcie regs and on newer cores to chipc */
++
++ if ((si->coreid[coreidx] == SB_CC) &&
++ ((si->sb.buscoretype == SB_PCIE) ||
++ (si->sb.buscorerev >= 13))) {
++ /* Chipc registers are mapped at 12KB */
++
++ fast = TRUE;
++ r = (uint32 *)((char *)si->curmap + PCI_16KB0_CCREGS_OFFSET + regoff);
++ } else if (si->sb.buscoreidx == coreidx) {
++ /* pci registers are at either in the last 2KB of an 8KB window
++ * or, in pcie and pci rev 13 at 8KB
++ */
++ fast = TRUE;
++ if ((si->sb.buscoretype == SB_PCIE) ||
++ (si->sb.buscorerev >= 13))
++ r = (uint32 *)((char *)si->curmap +
++ PCI_16KB0_PCIREGS_OFFSET + regoff);
++ else
++ r = (uint32 *)((char *)si->curmap +
++ ((regoff >= SBCONFIGOFF) ?
++ PCI_BAR0_PCISBR_OFFSET : PCI_BAR0_PCIREGS_OFFSET) +
++ regoff);
++ }
++ }
++#endif /* notyet */
++
++ if (!fast) {
++ INTR_OFF(si, intr_val);
++
++ /* save current core index */
++ origidx = sb_coreidx(&si->sb);
++
++ /* switch core */
++ r = (uint32*) ((uchar*) sb_setcoreidx(&si->sb, coreidx) + regoff);
++ }
++ ASSERT(r);
++
++ /* mask and set */
++ if (mask || val) {
++ if (regoff >= SBCONFIGOFF) {
++ w = (R_SBREG(si, r) & ~mask) | val;
++ W_SBREG(si, r, w);
++ } else {
++ w = (R_REG(si->osh, r) & ~mask) | val;
++ W_REG(si->osh, r, w);
++ }
++ }
++
++ /* readback */
++ if (regoff >= SBCONFIGOFF)
++ w = R_SBREG(si, r);
++ else
++ w = R_REG(si->osh, r);
++
++ if (!fast) {
++ /* restore core index */
++ if (origidx != coreidx)
++ sb_setcoreidx(&si->sb, origidx);
++
++ INTR_RESTORE(si, intr_val);
++ }
++
++ return (w);
++}
++
++#define DWORD_ALIGN(x) (x & ~(0x03))
++#define BYTE_POS(x) (x & 0x3)
++#define WORD_POS(x) (x & 0x1)
++
++#define BYTE_SHIFT(x) (8 * BYTE_POS(x))
++#define WORD_SHIFT(x) (16 * WORD_POS(x))
++
++#define BYTE_VAL(a, x) ((a >> BYTE_SHIFT(x)) & 0xFF)
++#define WORD_VAL(a, x) ((a >> WORD_SHIFT(x)) & 0xFFFF)
++
++#define read_pci_cfg_byte(a) \
++ (BYTE_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xff)
++
++#define read_pci_cfg_write(a) \
++ (WORD_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xffff)
++
++
++/* return TRUE if requested capability exists in the PCI config space */
++static bool
++sb_find_pci_capability(sb_info_t *si, uint8 req_cap_id, uchar *buf, uint32 *buflen)
++{
++ uint8 cap_id;
++ uint8 cap_ptr;
++ uint32 bufsize;
++ uint8 byte_val;
++
++ if (BUSTYPE(si->sb.bustype) != PCI_BUS)
++ return FALSE;
++
++ /* check for Header type 0 */
++ byte_val = read_pci_cfg_byte(PCI_CFG_HDR);
++ if ((byte_val & 0x7f) != PCI_HEADER_NORMAL)
++ return FALSE;
++
++ /* check if the capability pointer field exists */
++ byte_val = read_pci_cfg_byte(PCI_CFG_STAT);
++ if (!(byte_val & PCI_CAPPTR_PRESENT))
++ return FALSE;
++
++ cap_ptr = read_pci_cfg_byte(PCI_CFG_CAPPTR);
++ /* check if the capability pointer is 0x00 */
++ if (cap_ptr == 0x00)
++ return FALSE;
++
++
++ /* loop thr'u the capability list and see if the pcie capabilty exists */
++
++ cap_id = read_pci_cfg_byte(cap_ptr);
++
++ while (cap_id != req_cap_id) {
++ cap_ptr = read_pci_cfg_byte((cap_ptr+1));
++ if (cap_ptr == 0x00) break;
++ cap_id = read_pci_cfg_byte(cap_ptr);
++ }
++ if (cap_id != req_cap_id) {
++ return FALSE;
++ }
++ /* found the caller requested capability */
++ if ((buf != NULL) && (buflen != NULL)) {
++ bufsize = *buflen;
++ if (!bufsize) goto end;
++ *buflen = 0;
++ /* copy the cpability data excluding cap ID and next ptr */
++ cap_ptr += 2;
++ if ((bufsize + cap_ptr) > SZPCR)
++ bufsize = SZPCR - cap_ptr;
++ *buflen = bufsize;
++ while (bufsize--) {
++ *buf = read_pci_cfg_byte(cap_ptr);
++ cap_ptr++;
++ buf++;
++ }
++ }
++end:
++ return TRUE;
++}
++
++/* return TRUE if PCIE capability exists the pci config space */
++static inline bool
++sb_ispcie(sb_info_t *si)
++{
++ return (sb_find_pci_capability(si, PCI_CAP_PCIECAP_ID, NULL, NULL));
++}
++
++/* scan the sb enumerated space to identify all cores */
++static void
++BCMINITFN(sb_scan)(sb_info_t *si)
++{
++ uint origidx;
++ uint i;
++ bool pci;
++ bool pcie;
++ uint pciidx;
++ uint pcieidx;
++ uint pcirev;
++ uint pcierev;
++
++
++ /* numcores should already be set */
++ ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
++
++ /* save current core index */
++ origidx = sb_coreidx(&si->sb);
++
++ si->sb.buscorerev = NOREV;
++ si->sb.buscoreidx = BADIDX;
++
++ si->gpioidx = BADIDX;
++
++ pci = pcie = FALSE;
++ pcirev = pcierev = NOREV;
++ pciidx = pcieidx = BADIDX;
++
++ for (i = 0; i < si->numcores; i++) {
++ sb_setcoreidx(&si->sb, i);
++ si->coreid[i] = sb_coreid(&si->sb);
++
++ if (si->coreid[i] == SB_PCI) {
++ pciidx = i;
++ pcirev = sb_corerev(&si->sb);
++ pci = TRUE;
++ } else if (si->coreid[i] == SB_PCIE) {
++ pcieidx = i;
++ pcierev = sb_corerev(&si->sb);
++ pcie = TRUE;
++ } else if (si->coreid[i] == SB_PCMCIA) {
++ si->sb.buscorerev = sb_corerev(&si->sb);
++ si->sb.buscoretype = si->coreid[i];
++ si->sb.buscoreidx = i;
++ }
++ }
++ if (pci && pcie) {
++ if (sb_ispcie(si))
++ pci = FALSE;
++ else
++ pcie = FALSE;
++ }
++ if (pci) {
++ si->sb.buscoretype = SB_PCI;
++ si->sb.buscorerev = pcirev;
++ si->sb.buscoreidx = pciidx;
++ } else if (pcie) {
++ si->sb.buscoretype = SB_PCIE;
++ si->sb.buscorerev = pcierev;
++ si->sb.buscoreidx = pcieidx;
++ }
++
++ /*
++ * Find the gpio "controlling core" type and index.
++ * Precedence:
++ * - if there's a chip common core - use that
++ * - else if there's a pci core (rev >= 2) - use that
++ * - else there had better be an extif core (4710 only)
++ */
++ if (GOODIDX(sb_findcoreidx(si, SB_CC, 0))) {
++ si->gpioidx = sb_findcoreidx(si, SB_CC, 0);
++ si->gpioid = SB_CC;
++ } else if (PCI(si) && (si->sb.buscorerev >= 2)) {
++ si->gpioidx = si->sb.buscoreidx;
++ si->gpioid = SB_PCI;
++ } else if (sb_findcoreidx(si, SB_EXTIF, 0)) {
++ si->gpioidx = sb_findcoreidx(si, SB_EXTIF, 0);
++ si->gpioid = SB_EXTIF;
++ } else
++ ASSERT(si->gpioidx != BADIDX);
++
++ /* return to original core index */
++ sb_setcoreidx(&si->sb, origidx);
++}
++
++/* may be called with core in reset */
++void
++sb_detach(sb_t *sbh)
++{
++ sb_info_t *si;
++ uint idx;
++
++ si = SB_INFO(sbh);
++
++ if (si == NULL)
++ return;
++
++ if (BUSTYPE(si->sb.bustype) == SB_BUS)
++ for (idx = 0; idx < SB_MAXCORES; idx++)
++ if (si->regs[idx]) {
++ REG_UNMAP(si->regs[idx]);
++ si->regs[idx] = NULL;
++ }
++#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS)
++ if (si != &ksi)
++#endif /* !BCMBUSTYPE || (BCMBUSTYPE == SB_BUS) */
++ MFREE(si->osh, si, sizeof(sb_info_t));
++
++}
++
++/* use pci dev id to determine chip id for chips not having a chipcommon core */
++static uint
++BCMINITFN(sb_pcidev2chip)(uint pcidev)
++{
++ if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID))
++ return (BCM4710_CHIP_ID);
++ if ((pcidev >= BCM4402_ENET_ID) && (pcidev <= BCM4402_V90_ID))
++ return (BCM4402_CHIP_ID);
++ if (pcidev == BCM4401_ENET_ID)
++ return (BCM4402_CHIP_ID);
++
++ return (0);
++}
++
++/* convert chip number to number of i/o cores */
++static uint
++BCMINITFN(sb_chip2numcores)(uint chip)
++{
++ if (chip == BCM4710_CHIP_ID)
++ return (9);
++ if (chip == BCM4402_CHIP_ID)
++ return (3);
++ if (chip == BCM4306_CHIP_ID) /* < 4306c0 */
++ return (6);
++ if (chip == BCM4704_CHIP_ID)
++ return (9);
++ if (chip == BCM5365_CHIP_ID)
++ return (7);
++
++ SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip));
++ ASSERT(0);
++ return (1);
++}
++
++/* return index of coreid or BADIDX if not found */
++static uint
++sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit)
++{
++ uint found;
++ uint i;
++
++ found = 0;
++
++ for (i = 0; i < si->numcores; i++)
++ if (si->coreid[i] == coreid) {
++ if (found == coreunit)
++ return (i);
++ found++;
++ }
++
++ return (BADIDX);
++}
++
++/*
++ * this function changes logical "focus" to the indiciated core,
++ * must be called with interrupt off.
++ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
++ */
++void*
++sb_setcoreidx(sb_t *sbh, uint coreidx)
++{
++ sb_info_t *si;
++ uint32 sbaddr;
++ uint8 tmp;
++
++ si = SB_INFO(sbh);
++
++ if (coreidx >= si->numcores)
++ return (NULL);
++
++ /*
++ * If the user has provided an interrupt mask enabled function,
++ * then assert interrupts are disabled before switching the core.
++ */
++ ASSERT((si->intrsenabled_fn == NULL) || !(*(si)->intrsenabled_fn)((si)->intr_arg));
++
++ sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE);
++
++ switch (BUSTYPE(si->sb.bustype)) {
++ case SB_BUS:
++ /* map new one */
++ if (!si->regs[coreidx]) {
++ si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE);
++ ASSERT(GOODREGS(si->regs[coreidx]));
++ }
++ si->curmap = si->regs[coreidx];
++ break;
++
++ case PCI_BUS:
++ /* point bar0 window */
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr);
++ break;
++
++ case PCMCIA_BUS:
++ tmp = (sbaddr >> 12) & 0x0f;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
++ tmp = (sbaddr >> 16) & 0xff;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
++ tmp = (sbaddr >> 24) & 0xff;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
++ break;
++#ifdef BCMJTAG
++ case JTAG_BUS:
++ /* map new one */
++ if (!si->regs[coreidx]) {
++ si->regs[coreidx] = (void *)sbaddr;
++ ASSERT(GOODREGS(si->regs[coreidx]));
++ }
++ si->curmap = si->regs[coreidx];
++ break;
++#endif /* BCMJTAG */
++ }
++
++ si->curidx = coreidx;
++
++ return (si->curmap);
++}
++
++/*
++ * this function changes logical "focus" to the indiciated core,
++ * must be called with interrupt off.
++ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
++ */
++void*
++sb_setcore(sb_t *sbh, uint coreid, uint coreunit)
++{
++ sb_info_t *si;
++ uint idx;
++
++ si = SB_INFO(sbh);
++ idx = sb_findcoreidx(si, coreid, coreunit);
++ if (!GOODIDX(idx))
++ return (NULL);
++
++ return (sb_setcoreidx(sbh, idx));
++}
++
++/* return chip number */
++uint
++sb_chip(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ return (si->sb.chip);
++}
++
++/* return chip revision number */
++uint
++sb_chiprev(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ return (si->sb.chiprev);
++}
++
++/* return chip common revision number */
++uint
++sb_chipcrev(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ return (si->sb.ccrev);
++}
++
++/* return chip package option */
++uint
++sb_chippkg(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ return (si->sb.chippkg);
++}
++
++/* return PCI core rev. */
++uint
++sb_pcirev(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ return (si->sb.buscorerev);
++}
++
++bool
++BCMINITFN(sb_war16165)(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++
++ return (PCI(si) && (si->sb.buscorerev <= 10));
++}
++
++static void
++BCMINITFN(sb_war30841)(sb_info_t *si)
++{
++ sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_TIMER1, 0x8128);
++ sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_CDR, 0x0100);
++ sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_CDRBW, 0x1466);
++}
++
++/* return PCMCIA core rev. */
++uint
++BCMINITFN(sb_pcmciarev)(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ return (si->sb.buscorerev);
++}
++
++/* return board vendor id */
++uint
++sb_boardvendor(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ return (si->sb.boardvendor);
++}
++
++/* return boardtype */
++uint
++sb_boardtype(sb_t *sbh)
++{
++ sb_info_t *si;
++ char *var;
++
++ si = SB_INFO(sbh);
++
++ if (BUSTYPE(si->sb.bustype) == SB_BUS && si->sb.boardtype == 0xffff) {
++ /* boardtype format is a hex string */
++ si->sb.boardtype = getintvar(NULL, "boardtype");
++
++ /* backward compatibility for older boardtype string format */
++ if ((si->sb.boardtype == 0) && (var = getvar(NULL, "boardtype"))) {
++ if (!strcmp(var, "bcm94710dev"))
++ si->sb.boardtype = BCM94710D_BOARD;
++ else if (!strcmp(var, "bcm94710ap"))
++ si->sb.boardtype = BCM94710AP_BOARD;
++ else if (!strcmp(var, "bu4710"))
++ si->sb.boardtype = BU4710_BOARD;
++ else if (!strcmp(var, "bcm94702mn"))
++ si->sb.boardtype = BCM94702MN_BOARD;
++ else if (!strcmp(var, "bcm94710r1"))
++ si->sb.boardtype = BCM94710R1_BOARD;
++ else if (!strcmp(var, "bcm94710r4"))
++ si->sb.boardtype = BCM94710R4_BOARD;
++ else if (!strcmp(var, "bcm94702cpci"))
++ si->sb.boardtype = BCM94702CPCI_BOARD;
++ else if (!strcmp(var, "bcm95380_rr"))
++ si->sb.boardtype = BCM95380RR_BOARD;
++ }
++ }
++
++ return (si->sb.boardtype);
++}
++
++/* return bus type of sbh device */
++uint
++sb_bus(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ return (si->sb.bustype);
++}
++
++/* return bus core type */
++uint
++sb_buscoretype(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++
++ return (si->sb.buscoretype);
++}
++
++/* return bus core revision */
++uint
++sb_buscorerev(sb_t *sbh)
++{
++ sb_info_t *si;
++ si = SB_INFO(sbh);
++
++ return (si->sb.buscorerev);
++}
++
++/* return list of found cores */
++uint
++sb_corelist(sb_t *sbh, uint coreid[])
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++
++ bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof(uint)));
++ return (si->numcores);
++}
++
++/* return current register mapping */
++void *
++sb_coreregs(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ ASSERT(GOODREGS(si->curmap));
++
++ return (si->curmap);
++}
++
++
++/* do buffered registers update */
++void
++sb_commit(sb_t *sbh)
++{
++ sb_info_t *si;
++ uint origidx;
++ uint intr_val = 0;
++
++ si = SB_INFO(sbh);
++
++ origidx = si->curidx;
++ ASSERT(GOODIDX(origidx));
++
++ INTR_OFF(si, intr_val);
++
++ /* switch over to chipcommon core if there is one, else use pci */
++ if (si->sb.ccrev != NOREV) {
++ chipcregs_t *ccregs = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0);
++
++ /* do the buffer registers update */
++ W_REG(si->osh, &ccregs->broadcastaddress, SB_COMMIT);
++ W_REG(si->osh, &ccregs->broadcastdata, 0x0);
++ } else if (PCI(si)) {
++ sbpciregs_t *pciregs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0);
++
++ /* do the buffer registers update */
++ W_REG(si->osh, &pciregs->bcastaddr, SB_COMMIT);
++ W_REG(si->osh, &pciregs->bcastdata, 0x0);
++ } else
++ ASSERT(0);
++
++ /* restore core index */
++ sb_setcoreidx(sbh, origidx);
++ INTR_RESTORE(si, intr_val);
++}
++
++/* reset and re-enable a core
++ * inputs:
++ * bits - core specific bits that are set during and after reset sequence
++ * resetbits - core specific bits that are set only during reset sequence
++ */
++void
++sb_core_reset(sb_t *sbh, uint32 bits, uint32 resetbits)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++ volatile uint32 dummy;
++
++ si = SB_INFO(sbh);
++ ASSERT(GOODREGS(si->curmap));
++ sb = REGS2SB(si->curmap);
++
++ /*
++ * Must do the disable sequence first to work for arbitrary current core state.
++ */
++ sb_core_disable(sbh, (bits | resetbits));
++
++ /*
++ * Now do the initialization sequence.
++ */
++
++ /* set reset while enabling the clock and forcing them on throughout the core */
++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits | resetbits));
++ dummy = R_SBREG(si, &sb->sbtmstatelow);
++ OSL_DELAY(1);
++
++ if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_SERR) {
++ W_SBREG(si, &sb->sbtmstatehigh, 0);
++ }
++ if ((dummy = R_SBREG(si, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
++ AND_SBREG(si, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
++ }
++
++ /* clear reset and allow it to propagate throughout the core */
++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits));
++ dummy = R_SBREG(si, &sb->sbtmstatelow);
++ OSL_DELAY(1);
++
++ /* leave clock enabled */
++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_CLK | bits));
++ dummy = R_SBREG(si, &sb->sbtmstatelow);
++ OSL_DELAY(1);
++}
++
++void
++sb_core_tofixup(sb_t *sbh)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++
++ si = SB_INFO(sbh);
++
++ if ((BUSTYPE(si->sb.bustype) != PCI_BUS) || PCIE(si) ||
++ (PCI(si) && (si->sb.buscorerev >= 5)))
++ return;
++
++ ASSERT(GOODREGS(si->curmap));
++ sb = REGS2SB(si->curmap);
++
++ if (BUSTYPE(si->sb.bustype) == SB_BUS) {
++ SET_SBREG(si, &sb->sbimconfiglow,
++ SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
++ (0x5 << SBIMCL_RTO_SHIFT) | 0x3);
++ } else {
++ if (sb_coreid(sbh) == SB_PCI) {
++ SET_SBREG(si, &sb->sbimconfiglow,
++ SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
++ (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
++ } else {
++ SET_SBREG(si, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
++ }
++ }
++
++ sb_commit(sbh);
++}
++
++/*
++ * Set the initiator timeout for the "master core".
++ * The master core is defined to be the core in control
++ * of the chip and so it issues accesses to non-memory
++ * locations (Because of dma *any* core can access memeory).
++ *
++ * The routine uses the bus to decide who is the master:
++ * SB_BUS => mips
++ * JTAG_BUS => chipc
++ * PCI_BUS => pci or pcie
++ * PCMCIA_BUS => pcmcia
++ * SDIO_BUS => pcmcia
++ *
++ * This routine exists so callers can disable initiator
++ * timeouts so accesses to very slow devices like otp
++ * won't cause an abort. The routine allows arbitrary
++ * settings of the service and request timeouts, though.
++ *
++ * Returns the timeout state before changing it or -1
++ * on error.
++ */
++
++#define TO_MASK (SBIMCL_RTO_MASK | SBIMCL_STO_MASK)
++
++uint32
++sb_set_initiator_to(sb_t *sbh, uint32 to)
++{
++ sb_info_t *si;
++ uint origidx, idx;
++ uint intr_val = 0;
++ uint32 tmp, ret = 0xffffffff;
++ sbconfig_t *sb;
++
++ si = SB_INFO(sbh);
++
++ if ((to & ~TO_MASK) != 0)
++ return ret;
++
++ /* Figure out the master core */
++ idx = BADIDX;
++ switch (BUSTYPE(si->sb.bustype)) {
++ case PCI_BUS:
++ idx = si->sb.buscoreidx;
++ break;
++ case JTAG_BUS:
++ idx = SB_CC_IDX;
++ break;
++ case PCMCIA_BUS:
++ case SDIO_BUS:
++ idx = sb_findcoreidx(si, SB_PCMCIA, 0);
++ break;
++ case SB_BUS:
++ if ((idx = sb_findcoreidx(si, SB_MIPS33, 0)) == BADIDX)
++ idx = sb_findcoreidx(si, SB_MIPS, 0);
++ break;
++ default:
++ ASSERT(0);
++ }
++ if (idx == BADIDX)
++ return ret;
++
++ INTR_OFF(si, intr_val);
++ origidx = sb_coreidx(sbh);
++
++ sb = REGS2SB(sb_setcoreidx(sbh, idx));
++
++ tmp = R_SBREG(si, &sb->sbimconfiglow);
++ ret = tmp & TO_MASK;
++ W_SBREG(si, &sb->sbimconfiglow, (tmp & ~TO_MASK) | to);
++
++ sb_commit(sbh);
++ sb_setcoreidx(sbh, origidx);
++ INTR_RESTORE(si, intr_val);
++ return ret;
++}
++
++void
++sb_core_disable(sb_t *sbh, uint32 bits)
++{
++ sb_info_t *si;
++ volatile uint32 dummy;
++ uint32 rej;
++ sbconfig_t *sb;
++
++ si = SB_INFO(sbh);
++
++ ASSERT(GOODREGS(si->curmap));
++ sb = REGS2SB(si->curmap);
++
++ /* if core is already in reset, just return */
++ if (R_SBREG(si, &sb->sbtmstatelow) & SBTML_RESET)
++ return;
++
++ /* reject value changed between sonics 2.2 and 2.3 */
++ if (si->sb.sonicsrev == SONICS_2_2)
++ rej = (1 << SBTML_REJ_SHIFT);
++ else
++ rej = (2 << SBTML_REJ_SHIFT);
++
++ /* if clocks are not enabled, put into reset and return */
++ if ((R_SBREG(si, &sb->sbtmstatelow) & SBTML_CLK) == 0)
++ goto disable;
++
++ /* set target reject and spin until busy is clear (preserve core-specific bits) */
++ OR_SBREG(si, &sb->sbtmstatelow, rej);
++ dummy = R_SBREG(si, &sb->sbtmstatelow);
++ OSL_DELAY(1);
++ SPINWAIT((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000);
++ if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY)
++ SB_ERROR(("%s: target state still busy\n", __FUNCTION__));
++
++ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) {
++ OR_SBREG(si, &sb->sbimstate, SBIM_RJ);
++ dummy = R_SBREG(si, &sb->sbimstate);
++ OSL_DELAY(1);
++ SPINWAIT((R_SBREG(si, &sb->sbimstate) & SBIM_BY), 100000);
++ }
++
++ /* set reset and reject while enabling the clocks */
++ W_SBREG(si, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | rej | SBTML_RESET));
++ dummy = R_SBREG(si, &sb->sbtmstatelow);
++ OSL_DELAY(10);
++
++ /* don't forget to clear the initiator reject bit */
++ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT)
++ AND_SBREG(si, &sb->sbimstate, ~SBIM_RJ);
++
++disable:
++ /* leave reset and reject asserted */
++ W_SBREG(si, &sb->sbtmstatelow, (bits | rej | SBTML_RESET));
++ OSL_DELAY(1);
++}
++
++/* set chip watchdog reset timer to fire in 'ticks' backplane cycles */
++void
++sb_watchdog(sb_t *sbh, uint ticks)
++{
++ sb_info_t *si = SB_INFO(sbh);
++
++ /* make sure we come up in fast clock mode */
++ sb_clkctl_clk(sbh, CLK_FAST);
++
++ /* instant NMI */
++ switch (si->gpioid) {
++ case SB_CC:
++#ifdef __mips__
++ if (sb_chip(sbh) == BCM4785_CHIP_ID && ticks <= 1)
++ MTC0(C0_BROADCOM, 4, (1 << 22));
++#endif /* __mips__ */
++ sb_corereg(si, 0, OFFSETOF(chipcregs_t, watchdog), ~0, ticks);
++#ifdef __mips__
++ if (sb_chip(sbh) == BCM4785_CHIP_ID && ticks <= 1) {
++ __asm__ __volatile__ (
++ ".set\tmips3\n\t"
++ "sync\n\t"
++ "wait\n\t"
++ ".set\tmips0"
++ );
++ while (1);
++ }
++#endif /* __mips__ */
++ break;
++ case SB_EXTIF:
++ sb_corereg(si, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks);
++ break;
++ }
++}
++
++/* initialize the pcmcia core */
++void
++sb_pcmcia_init(sb_t *sbh)
++{
++ sb_info_t *si;
++ uint8 cor = 0;
++
++ si = SB_INFO(sbh);
++
++ /* enable d11 mac interrupts */
++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
++ cor |= COR_IRQEN | COR_FUNEN;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
++
++}
++
++
++/*
++ * Configure the pci core for pci client (NIC) action
++ * coremask is the bitvec of cores by index to be enabled.
++ */
++void
++BCMINITFN(sb_pci_setup)(sb_t *sbh, uint coremask)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++ sbpciregs_t *pciregs;
++ uint32 sbflag;
++ uint32 w;
++ uint idx;
++ int reg_val;
++
++ si = SB_INFO(sbh);
++
++ /* if not pci bus, we're done */
++ if (BUSTYPE(si->sb.bustype) != PCI_BUS)
++ return;
++
++ ASSERT(PCI(si) || PCIE(si));
++ ASSERT(si->sb.buscoreidx != BADIDX);
++
++ /* get current core index */
++ idx = si->curidx;
++
++ /* we interrupt on this backplane flag number */
++ ASSERT(GOODREGS(si->curmap));
++ sb = REGS2SB(si->curmap);
++ sbflag = R_SBREG(si, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
++
++ /* switch over to pci core */
++ pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->sb.buscoreidx);
++ sb = REGS2SB(pciregs);
++
++ /*
++ * Enable sb->pci interrupts. Assume
++ * PCI rev 2.3 support was added in pci core rev 6 and things changed..
++ */
++ if (PCIE(si) || (PCI(si) && ((si->sb.buscorerev) >= 6))) {
++ /* pci config write to set this core bit in PCIIntMask */
++ w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32));
++ w |= (coremask << PCI_SBIM_SHIFT);
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w);
++ } else {
++ /* set sbintvec bit for our flag number */
++ OR_SBREG(si, &sb->sbintvec, (1 << sbflag));
++ }
++
++ if (PCI(si)) {
++ OR_REG(si->osh, &pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST));
++ if (si->sb.buscorerev >= 11)
++ OR_REG(si->osh, &pciregs->sbtopci2, SBTOPCI_RC_READMULTI);
++ if (si->sb.buscorerev < 5) {
++ SET_SBREG(si, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
++ (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
++ sb_commit(sbh);
++ }
++ }
++
++#ifdef PCIE_SUPPOER
++ /* PCIE workarounds */
++ if (PCIE(si)) {
++ if ((si->sb.buscorerev == 0) || (si->sb.buscorerev == 1)) {
++ reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS,
++ PCIE_TLP_WORKAROUNDSREG);
++ reg_val |= 0x8;
++ sb_pcie_writereg((void *)sbh, (void *)PCIE_PCIEREGS,
++ PCIE_TLP_WORKAROUNDSREG, reg_val);
++ }
++
++ if (si->sb.buscorerev == 1) {
++ reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS,
++ PCIE_DLLP_LCREG);
++ reg_val |= (0x40);
++ sb_pcie_writereg(sbh, (void *)PCIE_PCIEREGS, PCIE_DLLP_LCREG, reg_val);
++ }
++
++ if (si->sb.buscorerev == 0)
++ sb_war30841(si);
++ }
++#endif
++
++ /* switch back to previous core */
++ sb_setcoreidx(sbh, idx);
++}
++
++uint32
++sb_base(uint32 admatch)
++{
++ uint32 base;
++ uint type;
++
++ type = admatch & SBAM_TYPE_MASK;
++ ASSERT(type < 3);
++
++ base = 0;
++
++ if (type == 0) {
++ base = admatch & SBAM_BASE0_MASK;
++ } else if (type == 1) {
++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
++ base = admatch & SBAM_BASE1_MASK;
++ } else if (type == 2) {
++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
++ base = admatch & SBAM_BASE2_MASK;
++ }
++
++ return (base);
++}
++
++uint32
++sb_size(uint32 admatch)
++{
++ uint32 size;
++ uint type;
++
++ type = admatch & SBAM_TYPE_MASK;
++ ASSERT(type < 3);
++
++ size = 0;
++
++ if (type == 0) {
++ size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1);
++ } else if (type == 1) {
++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
++ size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1);
++ } else if (type == 2) {
++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
++ size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1);
++ }
++
++ return (size);
++}
++
++/* return the core-type instantiation # of the current core */
++uint
++sb_coreunit(sb_t *sbh)
++{
++ sb_info_t *si;
++ uint idx;
++ uint coreid;
++ uint coreunit;
++ uint i;
++
++ si = SB_INFO(sbh);
++ coreunit = 0;
++
++ idx = si->curidx;
++
++ ASSERT(GOODREGS(si->curmap));
++ coreid = sb_coreid(sbh);
++
++ /* count the cores of our type */
++ for (i = 0; i < idx; i++)
++ if (si->coreid[i] == coreid)
++ coreunit++;
++
++ return (coreunit);
++}
++
++static INLINE uint32
++factor6(uint32 x)
++{
++ switch (x) {
++ case CC_F6_2: return 2;
++ case CC_F6_3: return 3;
++ case CC_F6_4: return 4;
++ case CC_F6_5: return 5;
++ case CC_F6_6: return 6;
++ case CC_F6_7: return 7;
++ default: return 0;
++ }
++}
++
++/* calculate the speed the SB would run at given a set of clockcontrol values */
++uint32
++sb_clock_rate(uint32 pll_type, uint32 n, uint32 m)
++{
++ uint32 n1, n2, clock, m1, m2, m3, mc;
++
++ n1 = n & CN_N1_MASK;
++ n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT;
++
++ if (pll_type == PLL_TYPE6) {
++ if (m & CC_T6_MMASK)
++ return CC_T6_M1;
++ else
++ return CC_T6_M0;
++ } else if ((pll_type == PLL_TYPE1) ||
++ (pll_type == PLL_TYPE3) ||
++ (pll_type == PLL_TYPE4) ||
++ (pll_type == PLL_TYPE7)) {
++ n1 = factor6(n1);
++ n2 += CC_F5_BIAS;
++ } else if (pll_type == PLL_TYPE2) {
++ n1 += CC_T2_BIAS;
++ n2 += CC_T2_BIAS;
++ ASSERT((n1 >= 2) && (n1 <= 7));
++ ASSERT((n2 >= 5) && (n2 <= 23));
++ } else if (pll_type == PLL_TYPE5) {
++ return (100000000);
++ } else
++ ASSERT(0);
++ /* PLL types 3 and 7 use BASE2 (25Mhz) */
++ if ((pll_type == PLL_TYPE3) ||
++ (pll_type == PLL_TYPE7)) {
++ clock = CC_CLOCK_BASE2 * n1 * n2;
++ } else
++ clock = CC_CLOCK_BASE1 * n1 * n2;
++
++ if (clock == 0)
++ return 0;
++
++ m1 = m & CC_M1_MASK;
++ m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT;
++ m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT;
++ mc = (m & CC_MC_MASK) >> CC_MC_SHIFT;
++
++ if ((pll_type == PLL_TYPE1) ||
++ (pll_type == PLL_TYPE3) ||
++ (pll_type == PLL_TYPE4) ||
++ (pll_type == PLL_TYPE7)) {
++ m1 = factor6(m1);
++ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE3))
++ m2 += CC_F5_BIAS;
++ else
++ m2 = factor6(m2);
++ m3 = factor6(m3);
++
++ switch (mc) {
++ case CC_MC_BYPASS: return (clock);
++ case CC_MC_M1: return (clock / m1);
++ case CC_MC_M1M2: return (clock / (m1 * m2));
++ case CC_MC_M1M2M3: return (clock / (m1 * m2 * m3));
++ case CC_MC_M1M3: return (clock / (m1 * m3));
++ default: return (0);
++ }
++ } else {
++ ASSERT(pll_type == PLL_TYPE2);
++
++ m1 += CC_T2_BIAS;
++ m2 += CC_T2M2_BIAS;
++ m3 += CC_T2_BIAS;
++ ASSERT((m1 >= 2) && (m1 <= 7));
++ ASSERT((m2 >= 3) && (m2 <= 10));
++ ASSERT((m3 >= 2) && (m3 <= 7));
++
++ if ((mc & CC_T2MC_M1BYP) == 0)
++ clock /= m1;
++ if ((mc & CC_T2MC_M2BYP) == 0)
++ clock /= m2;
++ if ((mc & CC_T2MC_M3BYP) == 0)
++ clock /= m3;
++
++ return (clock);
++ }
++}
++
++/* returns the current speed the SB is running at */
++uint32
++sb_clock(sb_t *sbh)
++{
++ sb_info_t *si;
++ extifregs_t *eir;
++ chipcregs_t *cc;
++ uint32 n, m;
++ uint idx;
++ uint32 pll_type, rate;
++ uint intr_val = 0;
++
++ si = SB_INFO(sbh);
++ idx = si->curidx;
++ pll_type = PLL_TYPE1;
++
++ INTR_OFF(si, intr_val);
++
++ /* switch to extif or chipc core */
++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
++ n = R_REG(si->osh, &eir->clockcontrol_n);
++ m = R_REG(si->osh, &eir->clockcontrol_sb);
++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++ pll_type = R_REG(si->osh, &cc->capabilities) & CAP_PLL_MASK;
++ if (pll_type == PLL_NONE) {
++ INTR_RESTORE(si, intr_val);
++ return 80000000;
++ }
++ n = R_REG(si->osh, &cc->clockcontrol_n);
++ if (pll_type == PLL_TYPE6)
++ m = R_REG(si->osh, &cc->clockcontrol_m3);
++ else if ((pll_type == PLL_TYPE3) && !(BCMINIT(sb_chip)(sbh) == 0x5365))
++ m = R_REG(si->osh, &cc->clockcontrol_m2);
++ else
++ m = R_REG(si->osh, &cc->clockcontrol_sb);
++ } else {
++ INTR_RESTORE(si, intr_val);
++ return 0;
++ }
++
++ /* calculate rate */
++ if (BCMINIT(sb_chip)(sbh) == 0x5365)
++ rate = 100000000;
++ else {
++ rate = sb_clock_rate(pll_type, n, m);
++
++ if (pll_type == PLL_TYPE3)
++ rate = rate / 2;
++ }
++
++ /* switch back to previous core */
++ sb_setcoreidx(sbh, idx);
++
++ INTR_RESTORE(si, intr_val);
++
++ return rate;
++}
++
++/* change logical "focus" to the gpio core for optimized access */
++void*
++sb_gpiosetcore(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++
++ return (sb_setcoreidx(sbh, si->gpioidx));
++}
++
++/* mask&set gpiocontrol bits */
++uint32
++sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
++{
++ sb_info_t *si;
++ uint regoff;
++
++ si = SB_INFO(sbh);
++ regoff = 0;
++
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* gpios could be shared on router platforms */
++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
++ mask = priority ? (sb_gpioreservation & mask) :
++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
++ val &= mask;
++ }
++
++ switch (si->gpioid) {
++ case SB_CC:
++ regoff = OFFSETOF(chipcregs_t, gpiocontrol);
++ break;
++
++ case SB_PCI:
++ regoff = OFFSETOF(sbpciregs_t, gpiocontrol);
++ break;
++
++ case SB_EXTIF:
++ return (0);
++ }
++
++ return (sb_corereg(si, si->gpioidx, regoff, mask, val));
++}
++
++/* mask&set gpio output enable bits */
++uint32
++sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
++{
++ sb_info_t *si;
++ uint regoff;
++
++ si = SB_INFO(sbh);
++ regoff = 0;
++
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* gpios could be shared on router platforms */
++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
++ mask = priority ? (sb_gpioreservation & mask) :
++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
++ val &= mask;
++ }
++
++ switch (si->gpioid) {
++ case SB_CC:
++ regoff = OFFSETOF(chipcregs_t, gpioouten);
++ break;
++
++ case SB_PCI:
++ regoff = OFFSETOF(sbpciregs_t, gpioouten);
++ break;
++
++ case SB_EXTIF:
++ regoff = OFFSETOF(extifregs_t, gpio[0].outen);
++ break;
++ }
++
++ return (sb_corereg(si, si->gpioidx, regoff, mask, val));
++}
++
++/* mask&set gpio output bits */
++uint32
++sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
++{
++ sb_info_t *si;
++ uint regoff;
++
++ si = SB_INFO(sbh);
++ regoff = 0;
++
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* gpios could be shared on router platforms */
++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
++ mask = priority ? (sb_gpioreservation & mask) :
++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
++ val &= mask;
++ }
++
++ switch (si->gpioid) {
++ case SB_CC:
++ regoff = OFFSETOF(chipcregs_t, gpioout);
++ break;
++
++ case SB_PCI:
++ regoff = OFFSETOF(sbpciregs_t, gpioout);
++ break;
++
++ case SB_EXTIF:
++ regoff = OFFSETOF(extifregs_t, gpio[0].out);
++ break;
++ }
++
++ return (sb_corereg(si, si->gpioidx, regoff, mask, val));
++}
++
++/* reserve one gpio */
++uint32
++sb_gpioreserve(sb_t *sbh, uint32 gpio_bitmask, uint8 priority)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* only cores on SB_BUS share GPIO's and only applcation users need to
++ * reserve/release GPIO
++ */
++ if ((BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) {
++ ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority));
++ return -1;
++ }
++ /* make sure only one bit is set */
++ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
++ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1)));
++ return -1;
++ }
++
++ /* already reserved */
++ if (sb_gpioreservation & gpio_bitmask)
++ return -1;
++ /* set reservation */
++ sb_gpioreservation |= gpio_bitmask;
++
++ return sb_gpioreservation;
++}
++
++/* release one gpio */
++/*
++ * releasing the gpio doesn't change the current value on the GPIO last write value
++ * persists till some one overwrites it
++*/
++
++uint32
++sb_gpiorelease(sb_t *sbh, uint32 gpio_bitmask, uint8 priority)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* only cores on SB_BUS share GPIO's and only applcation users need to
++ * reserve/release GPIO
++ */
++ if ((BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) {
++ ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority));
++ return -1;
++ }
++ /* make sure only one bit is set */
++ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
++ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1)));
++ return -1;
++ }
++
++ /* already released */
++ if (!(sb_gpioreservation & gpio_bitmask))
++ return -1;
++
++ /* clear reservation */
++ sb_gpioreservation &= ~gpio_bitmask;
++
++ return sb_gpioreservation;
++}
++
++/* return the current gpioin register value */
++uint32
++sb_gpioin(sb_t *sbh)
++{
++ sb_info_t *si;
++ uint regoff;
++
++ si = SB_INFO(sbh);
++ regoff = 0;
++
++ switch (si->gpioid) {
++ case SB_CC:
++ regoff = OFFSETOF(chipcregs_t, gpioin);
++ break;
++
++ case SB_PCI:
++ regoff = OFFSETOF(sbpciregs_t, gpioin);
++ break;
++
++ case SB_EXTIF:
++ regoff = OFFSETOF(extifregs_t, gpioin);
++ break;
++ }
++
++ return (sb_corereg(si, si->gpioidx, regoff, 0, 0));
++}
++
++/* mask&set gpio interrupt polarity bits */
++uint32
++sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
++{
++ sb_info_t *si;
++ uint regoff;
++
++ si = SB_INFO(sbh);
++ regoff = 0;
++
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* gpios could be shared on router platforms */
++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
++ mask = priority ? (sb_gpioreservation & mask) :
++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
++ val &= mask;
++ }
++
++ switch (si->gpioid) {
++ case SB_CC:
++ regoff = OFFSETOF(chipcregs_t, gpiointpolarity);
++ break;
++
++ case SB_PCI:
++ /* pci gpio implementation does not support interrupt polarity */
++ ASSERT(0);
++ break;
++
++ case SB_EXTIF:
++ regoff = OFFSETOF(extifregs_t, gpiointpolarity);
++ break;
++ }
++
++ return (sb_corereg(si, si->gpioidx, regoff, mask, val));
++}
++
++/* mask&set gpio interrupt mask bits */
++uint32
++sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
++{
++ sb_info_t *si;
++ uint regoff;
++
++ si = SB_INFO(sbh);
++ regoff = 0;
++
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* gpios could be shared on router platforms */
++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
++ mask = priority ? (sb_gpioreservation & mask) :
++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
++ val &= mask;
++ }
++
++ switch (si->gpioid) {
++ case SB_CC:
++ regoff = OFFSETOF(chipcregs_t, gpiointmask);
++ break;
++
++ case SB_PCI:
++ /* pci gpio implementation does not support interrupt mask */
++ ASSERT(0);
++ break;
++
++ case SB_EXTIF:
++ regoff = OFFSETOF(extifregs_t, gpiointmask);
++ break;
++ }
++
++ return (sb_corereg(si, si->gpioidx, regoff, mask, val));
++}
++
++/* assign the gpio to an led */
++uint32
++sb_gpioled(sb_t *sbh, uint32 mask, uint32 val)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ if (si->sb.ccrev < 16)
++ return -1;
++
++ /* gpio led powersave reg */
++ return (sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimeroutmask), mask, val));
++}
++
++/* mask & set gpio timer val */
++uint32
++sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 gpiotimerval)
++{
++ sb_info_t *si;
++ si = SB_INFO(sbh);
++
++ if (si->sb.ccrev < 16)
++ return -1;
++
++ return (sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), mask, gpiotimerval));
++}
++
++
++/* return the slow clock source - LPO, XTAL, or PCI */
++static uint
++sb_slowclk_src(sb_info_t *si)
++{
++ chipcregs_t *cc;
++
++
++ ASSERT(sb_coreid(&si->sb) == SB_CC);
++
++ if (si->sb.ccrev < 6) {
++ if ((BUSTYPE(si->sb.bustype) == PCI_BUS) &&
++ (OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32)) &
++ PCI_CFG_GPIO_SCS))
++ return (SCC_SS_PCI);
++ else
++ return (SCC_SS_XTAL);
++ } else if (si->sb.ccrev < 10) {
++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx);
++ return (R_REG(si->osh, &cc->slow_clk_ctl) & SCC_SS_MASK);
++ } else /* Insta-clock */
++ return (SCC_SS_XTAL);
++}
++
++/* return the ILP (slowclock) min or max frequency */
++static uint
++sb_slowclk_freq(sb_info_t *si, bool max)
++{
++ chipcregs_t *cc;
++ uint32 slowclk;
++ uint div;
++
++
++ ASSERT(sb_coreid(&si->sb) == SB_CC);
++
++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx);
++
++ /* shouldn't be here unless we've established the chip has dynamic clk control */
++ ASSERT(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL);
++
++ slowclk = sb_slowclk_src(si);
++ if (si->sb.ccrev < 6) {
++ if (slowclk == SCC_SS_PCI)
++ return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64));
++ else
++ return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32));
++ } else if (si->sb.ccrev < 10) {
++ div = 4 * (((R_REG(si->osh, &cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1);
++ if (slowclk == SCC_SS_LPO)
++ return (max? LPOMAXFREQ : LPOMINFREQ);
++ else if (slowclk == SCC_SS_XTAL)
++ return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div));
++ else if (slowclk == SCC_SS_PCI)
++ return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div));
++ else
++ ASSERT(0);
++ } else {
++ /* Chipc rev 10 is InstaClock */
++ div = R_REG(si->osh, &cc->system_clk_ctl) >> SYCC_CD_SHIFT;
++ div = 4 * (div + 1);
++ return (max ? XTALMAXFREQ : (XTALMINFREQ/div));
++ }
++ return (0);
++}
++
++static void
++BCMINITFN(sb_clkctl_setdelay)(sb_info_t *si, void *chipcregs)
++{
++ chipcregs_t * cc;
++ uint slowmaxfreq, pll_delay, slowclk;
++ uint pll_on_delay, fref_sel_delay;
++
++ pll_delay = PLL_DELAY;
++
++ /* If the slow clock is not sourced by the xtal then add the xtal_on_delay
++ * since the xtal will also be powered down by dynamic clk control logic.
++ */
++
++ slowclk = sb_slowclk_src(si);
++ if (slowclk != SCC_SS_XTAL)
++ pll_delay += XTAL_ON_DELAY;
++
++ /* Starting with 4318 it is ILP that is used for the delays */
++ slowmaxfreq = sb_slowclk_freq(si, (si->sb.ccrev >= 10) ? FALSE : TRUE);
++
++ pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
++ fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
++
++ cc = (chipcregs_t *)chipcregs;
++ W_REG(si->osh, &cc->pll_on_delay, pll_on_delay);
++ W_REG(si->osh, &cc->fref_sel_delay, fref_sel_delay);
++}
++
++/* initialize power control delay registers */
++void
++BCMINITFN(sb_clkctl_init)(sb_t *sbh)
++{
++ sb_info_t *si;
++ uint origidx;
++ chipcregs_t *cc;
++
++ si = SB_INFO(sbh);
++
++ origidx = si->curidx;
++
++ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
++ return;
++
++ if ((si->sb.chip == BCM4321_CHIP_ID) && (si->sb.chiprev < 2))
++ W_REG(si->osh, &cc->chipcontrol,
++ (si->sb.chiprev == 0) ? CHIPCTRL_4321A0_DEFAULT : CHIPCTRL_4321A1_DEFAULT);
++
++ if (!(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL))
++ goto done;
++
++ /* set all Instaclk chip ILP to 1 MHz */
++ else if (si->sb.ccrev >= 10)
++ SET_REG(si->osh, &cc->system_clk_ctl, SYCC_CD_MASK,
++ (ILP_DIV_1MHZ << SYCC_CD_SHIFT));
++
++ sb_clkctl_setdelay(si, (void *)cc);
++
++done:
++ sb_setcoreidx(sbh, origidx);
++}
++
++/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */
++uint16
++sb_clkctl_fast_pwrup_delay(sb_t *sbh)
++{
++ sb_info_t *si;
++ uint origidx;
++ chipcregs_t *cc;
++ uint slowminfreq;
++ uint16 fpdelay;
++ uint intr_val = 0;
++
++ si = SB_INFO(sbh);
++ fpdelay = 0;
++ origidx = si->curidx;
++
++ INTR_OFF(si, intr_val);
++
++ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
++ goto done;
++
++ if (!(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL))
++ goto done;
++
++ slowminfreq = sb_slowclk_freq(si, FALSE);
++ fpdelay = (((R_REG(si->osh, &cc->pll_on_delay) + 2) * 1000000) +
++ (slowminfreq - 1)) / slowminfreq;
++
++done:
++ sb_setcoreidx(sbh, origidx);
++ INTR_RESTORE(si, intr_val);
++ return (fpdelay);
++}
++
++/* turn primary xtal and/or pll off/on */
++int
++sb_clkctl_xtal(sb_t *sbh, uint what, bool on)
++{
++ sb_info_t *si;
++ uint32 in, out, outen;
++
++ si = SB_INFO(sbh);
++
++ switch (BUSTYPE(si->sb.bustype)) {
++
++
++ case PCMCIA_BUS:
++ return (0);
++
++
++ case PCI_BUS:
++
++ /* pcie core doesn't have any mapping to control the xtal pu */
++ if (PCIE(si))
++ return -1;
++
++ in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof(uint32));
++ out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32));
++ outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof(uint32));
++
++ /*
++ * Avoid glitching the clock if GPRS is already using it.
++ * We can't actually read the state of the PLLPD so we infer it
++ * by the value of XTAL_PU which *is* readable via gpioin.
++ */
++ if (on && (in & PCI_CFG_GPIO_XTAL))
++ return (0);
++
++ if (what & XTAL)
++ outen |= PCI_CFG_GPIO_XTAL;
++ if (what & PLL)
++ outen |= PCI_CFG_GPIO_PLL;
++
++ if (on) {
++ /* turn primary xtal on */
++ if (what & XTAL) {
++ out |= PCI_CFG_GPIO_XTAL;
++ if (what & PLL)
++ out |= PCI_CFG_GPIO_PLL;
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT,
++ sizeof(uint32), out);
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN,
++ sizeof(uint32), outen);
++ OSL_DELAY(XTAL_ON_DELAY);
++ }
++
++ /* turn pll on */
++ if (what & PLL) {
++ out &= ~PCI_CFG_GPIO_PLL;
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT,
++ sizeof(uint32), out);
++ OSL_DELAY(2000);
++ }
++ } else {
++ if (what & XTAL)
++ out &= ~PCI_CFG_GPIO_XTAL;
++ if (what & PLL)
++ out |= PCI_CFG_GPIO_PLL;
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32), out);
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof(uint32),
++ outen);
++ }
++
++ default:
++ return (-1);
++ }
++
++ return (0);
++}
++
++/* set dynamic clk control mode (forceslow, forcefast, dynamic) */
++/* returns true if we are forcing fast clock */
++bool
++sb_clkctl_clk(sb_t *sbh, uint mode)
++{
++ sb_info_t *si;
++ uint origidx;
++ chipcregs_t *cc;
++ uint32 scc;
++ uint intr_val = 0;
++
++ si = SB_INFO(sbh);
++
++ /* chipcommon cores prior to rev6 don't support dynamic clock control */
++ if (si->sb.ccrev < 6)
++ return (FALSE);
++
++
++ /* Chips with ccrev 10 are EOL and they don't have SYCC_HR which we use below */
++ ASSERT(si->sb.ccrev != 10);
++
++ INTR_OFF(si, intr_val);
++
++ origidx = si->curidx;
++
++ if (sb_setcore(sbh, SB_MIPS33, 0) && (sb_corerev(&si->sb) <= 7) &&
++ (BUSTYPE(si->sb.bustype) == SB_BUS) && (si->sb.ccrev >= 10))
++ goto done;
++
++ /* PR32414WAR "Force HT clock on" all the time, no dynamic clk ctl */
++ if ((si->sb.chip == BCM4311_CHIP_ID) && (si->sb.chiprev <= 1))
++ goto done;
++
++ cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
++ ASSERT(cc != NULL);
++
++ if (!(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL))
++ goto done;
++
++ switch (mode) {
++ case CLK_FAST: /* force fast (pll) clock */
++ if (si->sb.ccrev < 10) {
++ /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */
++ sb_clkctl_xtal(&si->sb, XTAL, ON);
++
++ SET_REG(si->osh, &cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
++ } else
++ OR_REG(si->osh, &cc->system_clk_ctl, SYCC_HR);
++ /* wait for the PLL */
++ OSL_DELAY(PLL_DELAY);
++ break;
++
++ case CLK_DYNAMIC: /* enable dynamic clock control */
++
++ if (si->sb.ccrev < 10) {
++ scc = R_REG(si->osh, &cc->slow_clk_ctl);
++ scc &= ~(SCC_FS | SCC_IP | SCC_XC);
++ if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
++ scc |= SCC_XC;
++ W_REG(si->osh, &cc->slow_clk_ctl, scc);
++
++ /* for dynamic control, we have to release our xtal_pu "force on" */
++ if (scc & SCC_XC)
++ sb_clkctl_xtal(&si->sb, XTAL, OFF);
++ } else {
++ /* Instaclock */
++ AND_REG(si->osh, &cc->system_clk_ctl, ~SYCC_HR);
++ }
++ break;
++
++ default:
++ ASSERT(0);
++ }
++
++done:
++ sb_setcoreidx(sbh, origidx);
++ INTR_RESTORE(si, intr_val);
++ return (mode == CLK_FAST);
++}
++
++/* register driver interrupt disabling and restoring callback functions */
++void
++sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn,
++ void *intrsenabled_fn, void *intr_arg)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ si->intr_arg = intr_arg;
++ si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn;
++ si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn;
++ si->intrsenabled_fn = (sb_intrsenabled_t)intrsenabled_fn;
++ /* save current core id. when this function called, the current core
++ * must be the core which provides driver functions(il, et, wl, etc.)
++ */
++ si->dev_coreid = si->coreid[si->curidx];
++}
++
++
++int
++sb_corepciid(sb_t *sbh, uint func, uint16 *pcivendor, uint16 *pcidevice,
++ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif,
++ uint8 *pciheader)
++{
++ uint16 vendor = 0xffff, device = 0xffff;
++ uint core, unit;
++ uint chip, chippkg;
++ uint nfunc;
++ char varname[SB_DEVPATH_BUFSZ + 8];
++ uint8 class, subclass, progif;
++ char devpath[SB_DEVPATH_BUFSZ];
++ uint8 header;
++
++ core = sb_coreid(sbh);
++ unit = sb_coreunit(sbh);
++
++ chip = sb_chip(sbh);
++ chippkg = sb_chippkg(sbh);
++
++ progif = 0;
++ header = PCI_HEADER_NORMAL;
++
++ /* Verify whether the function exists for the core */
++ nfunc = (core == SB_USB20H) ? 2 : 1;
++ if (func >= nfunc)
++ return BCME_ERROR;
++
++ /* Known vendor translations */
++ switch (sb_corevendor(sbh)) {
++ case SB_VEND_BCM:
++ vendor = VENDOR_BROADCOM;
++ break;
++ default:
++ return BCME_ERROR;
++ }
++
++ /* Determine class based on known core codes */
++ switch (core) {
++ case SB_ILINE20:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_ETHER;
++ device = BCM47XX_ILINE_ID;
++ break;
++ case SB_ENET:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_ETHER;
++ device = BCM47XX_ENET_ID;
++ break;
++ case SB_GIGETH:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_ETHER;
++ device = BCM47XX_GIGETH_ID;
++ break;
++ case SB_SDRAM:
++ case SB_MEMC:
++ class = PCI_CLASS_MEMORY;
++ subclass = PCI_MEMORY_RAM;
++ device = (uint16)core;
++ break;
++ case SB_PCI:
++ case SB_PCIE:
++ class = PCI_CLASS_BRIDGE;
++ subclass = PCI_BRIDGE_PCI;
++ device = (uint16)core;
++ header = PCI_HEADER_BRIDGE;
++ break;
++ case SB_MIPS:
++ case SB_MIPS33:
++ class = PCI_CLASS_CPU;
++ subclass = PCI_CPU_MIPS;
++ device = (uint16)core;
++ break;
++ case SB_CODEC:
++ class = PCI_CLASS_COMM;
++ subclass = PCI_COMM_MODEM;
++ device = BCM47XX_V90_ID;
++ break;
++ case SB_USB:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ progif = 0x10; /* OHCI */
++ device = BCM47XX_USB_ID;
++ break;
++ case SB_USB11H:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ progif = 0x10; /* OHCI */
++ device = BCM47XX_USBH_ID;
++ break;
++ case SB_USB20H:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ progif = func == 0 ? 0x10 : 0x20; /* OHCI/EHCI */
++ device = BCM47XX_USB20H_ID;
++ header = 0x80; /* multifunction */
++ break;
++ case SB_USB11D:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ device = BCM47XX_USBD_ID;
++ break;
++ case SB_USB20D:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ device = BCM47XX_USB20D_ID;
++ break;
++ case SB_IPSEC:
++ class = PCI_CLASS_CRYPT;
++ subclass = PCI_CRYPT_NETWORK;
++ device = BCM47XX_IPSEC_ID;
++ break;
++ case SB_ROBO:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_OTHER;
++ device = BCM47XX_ROBO_ID;
++ break;
++ case SB_EXTIF:
++ case SB_CC:
++ class = PCI_CLASS_MEMORY;
++ subclass = PCI_MEMORY_FLASH;
++ device = (uint16)core;
++ break;
++ case SB_D11:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_OTHER;
++ /* Let nvram variable override core ID */
++ sb_devpath(sbh, devpath, sizeof(devpath));
++ sprintf(varname, "%sdevid", devpath);
++ if ((device = (uint16)getintvar(NULL, varname)))
++ break;
++ /*
++ * no longer support wl%did, but keep the code
++ * here for backward compatibility.
++ */
++ sprintf(varname, "wl%did", unit);
++ if ((device = (uint16)getintvar(NULL, varname)))
++ break;
++ /* Chip specific conversion */
++ if (chip == BCM4712_CHIP_ID) {
++ if (chippkg == BCM4712SMALL_PKG_ID)
++ device = BCM4306_D11G_ID;
++ else
++ device = BCM4306_D11DUAL_ID;
++ break;
++ }
++ /* ignore it */
++ device = 0xffff;
++ break;
++ case SB_SATAXOR:
++ class = PCI_CLASS_XOR;
++ subclass = PCI_XOR_QDMA;
++ device = BCM47XX_SATAXOR_ID;
++ break;
++ case SB_ATA100:
++ class = PCI_CLASS_DASDI;
++ subclass = PCI_DASDI_IDE;
++ device = BCM47XX_ATA100_ID;
++ break;
++
++ default:
++ class = subclass = progif = 0xff;
++ device = (uint16)core;
++ break;
++ }
++
++ *pcivendor = vendor;
++ *pcidevice = device;
++ *pciclass = class;
++ *pcisubclass = subclass;
++ *pciprogif = progif;
++ *pciheader = header;
++
++ return 0;
++}
++
++
++
++/* use the mdio interface to write to mdio slaves */
++static int
++sb_pcie_mdiowrite(sb_info_t *si, uint physmedia, uint regaddr, uint val)
++{
++ uint mdiodata;
++ uint i = 0;
++ sbpcieregs_t *pcieregs;
++
++ pcieregs = (sbpcieregs_t*) sb_setcoreidx(&si->sb, si->sb.buscoreidx);
++ ASSERT(pcieregs);
++
++ /* enable mdio access to SERDES */
++ W_REG(si->osh, (&pcieregs->mdiocontrol), MDIOCTL_PREAM_EN | MDIOCTL_DIVISOR_VAL);
++
++ mdiodata = MDIODATA_START | MDIODATA_WRITE |
++ (physmedia << MDIODATA_DEVADDR_SHF) |
++ (regaddr << MDIODATA_REGADDR_SHF) | MDIODATA_TA | val;
++
++ W_REG(si->osh, (&pcieregs->mdiodata), mdiodata);
++
++ PR28829_DELAY();
++
++ /* retry till the transaction is complete */
++ while (i < 10) {
++ if (R_REG(si->osh, &(pcieregs->mdiocontrol)) & MDIOCTL_ACCESS_DONE) {
++ /* Disable mdio access to SERDES */
++ W_REG(si->osh, (&pcieregs->mdiocontrol), 0);
++ return 0;
++ }
++ OSL_DELAY(1000);
++ i++;
++ }
++
++ SB_ERROR(("sb_pcie_mdiowrite: timed out\n"));
++ /* Disable mdio access to SERDES */
++ W_REG(si->osh, (&pcieregs->mdiocontrol), 0);
++ ASSERT(0);
++ return 1;
++
++}
++
++/* indirect way to read pcie config regs */
++uint
++sb_pcie_readreg(void *sb, void* arg1, uint offset)
++{
++ sb_info_t *si;
++ sb_t *sbh;
++ uint retval = 0xFFFFFFFF;
++ sbpcieregs_t *pcieregs;
++ uint addrtype;
++
++ sbh = (sb_t *)sb;
++ si = SB_INFO(sbh);
++ ASSERT(PCIE(si));
++
++ pcieregs = (sbpcieregs_t *)sb_setcore(sbh, SB_PCIE, 0);
++ ASSERT(pcieregs);
++
++ addrtype = (uint)((uintptr)arg1);
++ switch (addrtype) {
++ case PCIE_CONFIGREGS:
++ W_REG(si->osh, (&pcieregs->configaddr), offset);
++ retval = R_REG(si->osh, &(pcieregs->configdata));
++ break;
++ case PCIE_PCIEREGS:
++ W_REG(si->osh, &(pcieregs->pcieaddr), offset);
++ retval = R_REG(si->osh, &(pcieregs->pciedata));
++ break;
++ default:
++ ASSERT(0);
++ break;
++ }
++ return retval;
++}
++
++/* indirect way to write pcie config/mdio/pciecore regs */
++uint
++sb_pcie_writereg(sb_t *sbh, void *arg1, uint offset, uint val)
++{
++ sb_info_t *si;
++ sbpcieregs_t *pcieregs;
++ uint addrtype;
++
++ si = SB_INFO(sbh);
++ ASSERT(PCIE(si));
++
++ pcieregs = (sbpcieregs_t *)sb_setcore(sbh, SB_PCIE, 0);
++ ASSERT(pcieregs);
++
++ addrtype = (uint)((uintptr)arg1);
++
++ switch (addrtype) {
++ case PCIE_CONFIGREGS:
++ W_REG(si->osh, (&pcieregs->configaddr), offset);
++ W_REG(si->osh, (&pcieregs->configdata), val);
++ break;
++ case PCIE_PCIEREGS:
++ W_REG(si->osh, (&pcieregs->pcieaddr), offset);
++ W_REG(si->osh, (&pcieregs->pciedata), val);
++ break;
++ default:
++ ASSERT(0);
++ break;
++ }
++ return 0;
++}
++
++/* Build device path. Support SB, PCI, and JTAG for now. */
++int
++sb_devpath(sb_t *sbh, char *path, int size)
++{
++ ASSERT(path);
++ ASSERT(size >= SB_DEVPATH_BUFSZ);
++
++ switch (BUSTYPE((SB_INFO(sbh))->sb.bustype)) {
++ case SB_BUS:
++ case JTAG_BUS:
++ sprintf(path, "sb/%u/", sb_coreidx(sbh));
++ break;
++ case PCI_BUS:
++ ASSERT((SB_INFO(sbh))->osh);
++ sprintf(path, "pci/%u/%u/", OSL_PCI_BUS((SB_INFO(sbh))->osh),
++ OSL_PCI_SLOT((SB_INFO(sbh))->osh));
++ break;
++ case PCMCIA_BUS:
++ SB_ERROR(("sb_devpath: OSL_PCMCIA_BUS() not implemented, bus 1 assumed\n"));
++ SB_ERROR(("sb_devpath: OSL_PCMCIA_SLOT() not implemented, slot 1 assumed\n"));
++ sprintf(path, "pc/%u/%u/", 1, 1);
++ break;
++ case SDIO_BUS:
++ SB_ERROR(("sb_devpath: device 0 assumed\n"));
++ sprintf(path, "sd/%u/", sb_coreidx(sbh));
++ break;
++ default:
++ ASSERT(0);
++ break;
++ }
++
++ return 0;
++}
++
++/*
++ * Fixup SROMless PCI device's configuration.
++ * The current core may be changed upon return.
++ */
++static int
++sb_pci_fixcfg(sb_info_t *si)
++{
++ uint origidx, pciidx;
++ sbpciregs_t *pciregs;
++ sbpcieregs_t *pcieregs;
++ uint16 val16, *reg16;
++ char name[SB_DEVPATH_BUFSZ+16], *value;
++ char devpath[SB_DEVPATH_BUFSZ];
++
++ ASSERT(BUSTYPE(si->sb.bustype) == PCI_BUS);
++
++ /* Fixup PI in SROM shadow area to enable the correct PCI core access */
++ /* save the current index */
++ origidx = sb_coreidx(&si->sb);
++
++ /* check 'pi' is correct and fix it if not */
++ if (si->sb.buscoretype == SB_PCIE) {
++ pcieregs = (sbpcieregs_t *)sb_setcore(&si->sb, SB_PCIE, 0);
++ ASSERT(pcieregs);
++ reg16 = &pcieregs->sprom[SRSH_PI_OFFSET];
++ } else if (si->sb.buscoretype == SB_PCI) {
++ pciregs = (sbpciregs_t *)sb_setcore(&si->sb, SB_PCI, 0);
++ ASSERT(pciregs);
++ reg16 = &pciregs->sprom[SRSH_PI_OFFSET];
++ } else {
++ ASSERT(0);
++ return -1;
++ }
++ pciidx = sb_coreidx(&si->sb);
++ val16 = R_REG(si->osh, reg16);
++ if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != (uint16)pciidx) {
++ val16 = (uint16)(pciidx << SRSH_PI_SHIFT) | (val16 & ~SRSH_PI_MASK);
++ W_REG(si->osh, reg16, val16);
++ }
++
++ /* restore the original index */
++ sb_setcoreidx(&si->sb, origidx);
++
++ /*
++ * Fixup bar0window in PCI config space to make the core indicated
++ * by the nvram variable the current core.
++ * !Do it last, it may change the current core!
++ */
++ if (sb_devpath(&si->sb, devpath, sizeof(devpath)))
++ return -1;
++ sprintf(name, "%sb0w", devpath);
++ if ((value = getvar(NULL, name))) {
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32),
++ bcm_strtoul(value, NULL, 16));
++ /* update curidx since the current core is changed */
++ si->curidx = _sb_coreidx(si);
++ if (si->curidx == BADIDX) {
++ SB_ERROR(("sb_pci_fixcfg: bad core index\n"));
++ return -1;
++ }
++ }
++
++ return 0;
++}
++
++static uint
++sb_chipc_capability(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++
++ /* Make sure that there is ChipCommon core present */
++ if (si->coreid[SB_CC_IDX] == SB_CC)
++ return (sb_corereg(si, SB_CC_IDX, OFFSETOF(chipcregs_t, capabilities),
++ 0, 0));
++ return 0;
++}
++
++/* Return ADDR64 capability of the backplane */
++bool
++sb_backplane64(sb_t *sbh)
++{
++ return ((sb_chipc_capability(sbh) & CAP_BKPLN64) != 0);
++}
++
++void
++sb_btcgpiowar(sb_t *sbh)
++{
++ sb_info_t *si;
++ uint origidx;
++ uint intr_val = 0;
++ chipcregs_t *cc;
++ si = SB_INFO(sbh);
++
++ /* Make sure that there is ChipCommon core present &&
++ * UART_TX is strapped to 1
++ */
++ if (!(sb_chipc_capability(sbh) & CAP_UARTGPIO))
++ return;
++
++ /* sb_corereg cannot be used as we have to guarantee 8-bit read/writes */
++ INTR_OFF(si, intr_val);
++
++ origidx = sb_coreidx(sbh);
++
++ cc = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0);
++ if (cc == NULL)
++ goto end;
++
++ W_REG(si->osh, &cc->uart0mcr, R_REG(si->osh, &cc->uart0mcr) | 0x04);
++
++end:
++ /* restore the original index */
++ sb_setcoreidx(sbh, origidx);
++
++ INTR_RESTORE(si, intr_val);
++}
++
++/* check if the device is removed */
++bool
++sb_deviceremoved(sb_t *sbh)
++{
++ uint32 w;
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++
++ switch (BUSTYPE(si->sb.bustype)) {
++ case PCI_BUS:
++ ASSERT(si->osh);
++ w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_VID, sizeof(uint32));
++ if ((w & 0xFFFF) != VENDOR_BROADCOM)
++ return TRUE;
++ else
++ return FALSE;
++ default:
++ return FALSE;
++ }
++ return FALSE;
++}
++
++/* Return the RAM size of the SOCRAM core */
++uint32
++sb_socram_size(sb_t *sbh)
++{
++ sb_info_t *si;
++ uint origidx;
++ uint intr_val = 0;
++
++ sbsocramregs_t *regs;
++ bool wasup;
++ uint corerev;
++ uint32 coreinfo;
++ uint memsize = 0;
++
++ si = SB_INFO(sbh);
++ ASSERT(si);
++
++ /* Block ints and save current core */
++ INTR_OFF(si, intr_val);
++ origidx = sb_coreidx(sbh);
++
++ /* Switch to SOCRAM core */
++ if (!(regs = sb_setcore(sbh, SB_SOCRAM, 0)))
++ goto done;
++
++ /* Get info for determining size */
++ if (!(wasup = sb_iscoreup(sbh)))
++ sb_core_reset(sbh, 0, 0);
++ corerev = sb_corerev(sbh);
++ coreinfo = R_REG(si->osh, &regs->coreinfo);
++
++ /* Calculate size from coreinfo based on rev */
++ switch (corerev) {
++ case 0:
++ memsize = 1 << (16 + (coreinfo & SRCI_MS0_MASK));
++ break;
++ default: /* rev >= 1 */
++ memsize = 1 << (SR_BSZ_BASE + (coreinfo & SRCI_SRBSZ_MASK));
++ memsize *= (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
++ break;
++ }
++
++ /* Return to previous state and core */
++ if (!wasup)
++ sb_core_disable(sbh, 0);
++ sb_setcoreidx(sbh, origidx);
++
++done:
++ INTR_RESTORE(si, intr_val);
++ return memsize;
++}
++
++
+diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setup.c
+--- linux.old/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/setup.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,241 @@
++/*
++ * Generic setup routines for Broadcom MIPS boards
++ *
++ * Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ *
++ * Copyright 2005, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/serialP.h>
++#include <linux/ide.h>
++#include <asm/bootinfo.h>
++#include <asm/cpu.h>
++#include <asm/time.h>
++#include <asm/reboot.h>
++
++#include <typedefs.h>
++#include <osl.h>
++#include <sbutils.h>
++#include <bcmutils.h>
++#include <bcmnvram.h>
++#include <sbhndmips.h>
++#include <hndmips.h>
++#include <trxhdr.h>
++
++/* Virtual IRQ base, after last hw IRQ */
++#define SBMIPS_VIRTIRQ_BASE 6
++
++/* # IRQs, hw and sw IRQs */
++#define SBMIPS_NUMIRQS 8
++
++/* Global SB handle */
++sb_t *bcm947xx_sbh = NULL;
++spinlock_t bcm947xx_sbh_lock = SPIN_LOCK_UNLOCKED;
++
++/* Convenience */
++#define sbh bcm947xx_sbh
++#define sbh_lock bcm947xx_sbh_lock
++
++extern void bcm947xx_time_init(void);
++extern void bcm947xx_timer_setup(struct irqaction *irq);
++
++#ifdef CONFIG_REMOTE_DEBUG
++extern void set_debug_traps(void);
++extern void rs_kgdb_hook(struct serial_state *);
++extern void breakpoint(void);
++#endif
++
++#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
++extern struct ide_ops std_ide_ops;
++#endif
++
++/* Kernel command line */
++char arcs_cmdline[CL_SIZE] __initdata = CONFIG_CMDLINE;
++extern void sb_serial_init(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift));
++
++void
++bcm947xx_machine_restart(char *command)
++{
++ printk("Please stand by while rebooting the system...\n");
++
++ /* Set the watchdog timer to reset immediately */
++ __cli();
++ sb_watchdog(sbh, 1);
++ while (1);
++}
++
++void
++bcm947xx_machine_halt(void)
++{
++ printk("System halted\n");
++
++ /* Disable interrupts and watchdog and spin forever */
++ __cli();
++ sb_watchdog(sbh, 0);
++ while (1);
++}
++
++#ifdef CONFIG_SERIAL
++
++static int ser_line = 0;
++
++typedef struct {
++ void *regs;
++ uint irq;
++ uint baud_base;
++ uint reg_shift;
++} serial_port;
++
++static serial_port ports[4];
++static int num_ports = 0;
++
++static void
++serial_add(void *regs, uint irq, uint baud_base, uint reg_shift)
++{
++ ports[num_ports].regs = regs;
++ ports[num_ports].irq = irq;
++ ports[num_ports].baud_base = baud_base;
++ ports[num_ports].reg_shift = reg_shift;
++ num_ports++;
++}
++
++static void
++do_serial_add(serial_port *port)
++{
++ void *regs;
++ uint irq;
++ uint baud_base;
++ uint reg_shift;
++ struct serial_struct s;
++
++ regs = port->regs;
++ irq = port->irq;
++ baud_base = port->baud_base;
++ reg_shift = port->reg_shift;
++
++ memset(&s, 0, sizeof(s));
++
++ s.line = ser_line++;
++ s.iomem_base = regs;
++ s.irq = irq + 2;
++ s.baud_base = baud_base / 16;
++ s.flags = ASYNC_BOOT_AUTOCONF;
++ s.io_type = SERIAL_IO_MEM;
++ s.iomem_reg_shift = reg_shift;
++
++ if (early_serial_setup(&s) != 0) {
++ printk(KERN_ERR "Serial setup failed!\n");
++ }
++}
++
++#endif /* CONFIG_SERIAL */
++
++void __init
++brcm_setup(void)
++{
++ char *s;
++ int i;
++ char *value;
++
++ /* Get global SB handle */
++ sbh = sb_kattach();
++
++ /* Initialize clocks and interrupts */
++ sb_mips_init(sbh, SBMIPS_VIRTIRQ_BASE);
++
++ if (BCM330X(current_cpu_data.processor_id) &&
++ (read_c0_diag() & BRCM_PFC_AVAIL)) {
++ /*
++ * Now that the sbh is inited set the proper PFC value
++ */
++ printk("Setting the PFC to its default value\n");
++ enable_pfc(PFC_AUTO);
++ }
++
++
++#ifdef CONFIG_SERIAL
++ sb_serial_init(sbh, serial_add);
++
++ /* reverse serial ports if nvram variable starts with console=ttyS1 */
++ /* Initialize UARTs */
++ s = nvram_get("kernel_args");
++ if (!s) s = "";
++ if (!strncmp(s, "console=ttyS1", 13)) {
++ for (i = num_ports; i; i--)
++ do_serial_add(&ports[i - 1]);
++ } else {
++ for (i = 0; i < num_ports; i++)
++ do_serial_add(&ports[i]);
++ }
++#endif
++
++#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
++ ide_ops = &std_ide_ops;
++#endif
++
++ /* Override default command line arguments */
++ value = nvram_get("kernel_cmdline");
++ if (value && strlen(value) && strncmp(value, "empty", 5))
++ strncpy(arcs_cmdline, value, sizeof(arcs_cmdline));
++
++
++ /* Generic setup */
++ _machine_restart = bcm947xx_machine_restart;
++ _machine_halt = bcm947xx_machine_halt;
++ _machine_power_off = bcm947xx_machine_halt;
++
++ board_time_init = bcm947xx_time_init;
++ board_timer_setup = bcm947xx_timer_setup;
++}
++
++const char *
++get_system_type(void)
++{
++ static char s[32];
++
++ if (bcm947xx_sbh) {
++ sprintf(s, "Broadcom BCM%X chip rev %d", sb_chip(bcm947xx_sbh),
++ sb_chiprev(bcm947xx_sbh));
++ return s;
++ }
++ else
++ return "Broadcom BCM947XX";
++}
++
++void __init
++bus_error_init(void)
++{
++}
++
+diff -urN linux.old/arch/mips/bcm947xx/sflash.c linux.dev/arch/mips/bcm947xx/sflash.c
+--- linux.old/arch/mips/bcm947xx/sflash.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/sflash.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,422 @@
++/*
++ * Broadcom SiliconBackplane chipcommon serial flash interface
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sflash.c,v 1.1.1.13 2006/02/27 03:43:16 honor Exp $
++ */
++
++#include <osl.h>
++#include <typedefs.h>
++#include <sbconfig.h>
++#include <sbchipc.h>
++#include <mipsinc.h>
++#include <bcmutils.h>
++#include <bcmdevs.h>
++#include <sflash.h>
++
++/* Private global state */
++static struct sflash sflash;
++
++/* Issue a serial flash command */
++static INLINE void
++sflash_cmd(chipcregs_t *cc, uint opcode)
++{
++ W_REG(NULL, &cc->flashcontrol, SFLASH_START | opcode);
++ while (R_REG(NULL, &cc->flashcontrol) & SFLASH_BUSY);
++}
++
++/* Initialize serial flash access */
++struct sflash *
++sflash_init(chipcregs_t *cc)
++{
++ uint32 id, id2;
++
++ bzero(&sflash, sizeof(sflash));
++
++ sflash.type = R_REG(NULL, &cc->capabilities) & CAP_FLASH_MASK;
++
++ switch (sflash.type) {
++ case SFLASH_ST:
++ /* Probe for ST chips */
++ sflash_cmd(cc, SFLASH_ST_DP);
++ sflash_cmd(cc, SFLASH_ST_RES);
++ id = R_REG(NULL, &cc->flashdata);
++ switch (id) {
++ case 0x11:
++ /* ST M25P20 2 Mbit Serial Flash */
++ sflash.blocksize = 64 * 1024;
++ sflash.numblocks = 4;
++ break;
++ case 0x12:
++ /* ST M25P40 4 Mbit Serial Flash */
++ sflash.blocksize = 64 * 1024;
++ sflash.numblocks = 8;
++ break;
++ case 0x13:
++ /* ST M25P80 8 Mbit Serial Flash */
++ sflash.blocksize = 64 * 1024;
++ sflash.numblocks = 16;
++ break;
++ case 0x14:
++ /* ST M25P16 16 Mbit Serial Flash */
++ sflash.blocksize = 64 * 1024;
++ sflash.numblocks = 32;
++ break;
++ case 0x15:
++ /* ST M25P32 32 Mbit Serial Flash */
++ sflash.blocksize = 64 * 1024;
++ sflash.numblocks = 64;
++ break;
++ case 0x16:
++ /* ST M25P64 64 Mbit Serial Flash */
++ sflash.blocksize = 64 * 1024;
++ sflash.numblocks = 128;
++ break;
++ case 0xbf:
++ W_REG(NULL, &cc->flashaddress, 1);
++ sflash_cmd(cc, SFLASH_ST_RES);
++ id2 = R_REG(NULL, &cc->flashdata);
++ if (id2 == 0x44) {
++ /* SST M25VF80 4 Mbit Serial Flash */
++ sflash.blocksize = 64 * 1024;
++ sflash.numblocks = 8;
++ }
++ break;
++ }
++ break;
++
++ case SFLASH_AT:
++ /* Probe for Atmel chips */
++ sflash_cmd(cc, SFLASH_AT_STATUS);
++ id = R_REG(NULL, &cc->flashdata) & 0x3c;
++ switch (id) {
++ case 0xc:
++ /* Atmel AT45DB011 1Mbit Serial Flash */
++ sflash.blocksize = 256;
++ sflash.numblocks = 512;
++ break;
++ case 0x14:
++ /* Atmel AT45DB021 2Mbit Serial Flash */
++ sflash.blocksize = 256;
++ sflash.numblocks = 1024;
++ break;
++ case 0x1c:
++ /* Atmel AT45DB041 4Mbit Serial Flash */
++ sflash.blocksize = 256;
++ sflash.numblocks = 2048;
++ break;
++ case 0x24:
++ /* Atmel AT45DB081 8Mbit Serial Flash */
++ sflash.blocksize = 256;
++ sflash.numblocks = 4096;
++ break;
++ case 0x2c:
++ /* Atmel AT45DB161 16Mbit Serial Flash */
++ sflash.blocksize = 512;
++ sflash.numblocks = 4096;
++ break;
++ case 0x34:
++ /* Atmel AT45DB321 32Mbit Serial Flash */
++ sflash.blocksize = 512;
++ sflash.numblocks = 8192;
++ break;
++ case 0x3c:
++ /* Atmel AT45DB642 64Mbit Serial Flash */
++ sflash.blocksize = 1024;
++ sflash.numblocks = 8192;
++ break;
++ }
++ break;
++ }
++
++ sflash.size = sflash.blocksize * sflash.numblocks;
++ return sflash.size ? &sflash : NULL;
++}
++
++/* Read len bytes starting at offset into buf. Returns number of bytes read. */
++int
++sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf)
++{
++ int cnt;
++ uint32 *from, *to;
++
++ if (!len)
++ return 0;
++
++ if ((offset + len) > sflash.size)
++ return -22;
++
++ if ((len >= 4) && (offset & 3))
++ cnt = 4 - (offset & 3);
++ else if ((len >= 4) && ((uint32)buf & 3))
++ cnt = 4 - ((uint32)buf & 3);
++ else
++ cnt = len;
++
++ from = (uint32 *)KSEG1ADDR(SB_FLASH2 + offset);
++ to = (uint32 *)buf;
++
++ if (cnt < 4) {
++ bcopy(from, to, cnt);
++ return cnt;
++ }
++
++ while (cnt >= 4) {
++ *to++ = *from++;
++ cnt -= 4;
++ }
++
++ return (len - cnt);
++}
++
++/* Poll for command completion. Returns zero when complete. */
++int
++sflash_poll(chipcregs_t *cc, uint offset)
++{
++ if (offset >= sflash.size)
++ return -22;
++
++ switch (sflash.type) {
++ case SFLASH_ST:
++ /* Check for ST Write In Progress bit */
++ sflash_cmd(cc, SFLASH_ST_RDSR);
++ return R_REG(NULL, &cc->flashdata) & SFLASH_ST_WIP;
++ case SFLASH_AT:
++ /* Check for Atmel Ready bit */
++ sflash_cmd(cc, SFLASH_AT_STATUS);
++ return !(R_REG(NULL, &cc->flashdata) & SFLASH_AT_READY);
++ }
++
++ return 0;
++}
++
++/* Write len bytes starting at offset into buf. Returns number of bytes
++ * written. Caller should poll for completion.
++ */
++int
++sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf)
++{
++ struct sflash *sfl;
++ int ret = 0;
++ bool is4712b0;
++ uint32 page, byte, mask;
++
++ if (!len)
++ return 0;
++
++ if ((offset + len) > sflash.size)
++ return -22;
++
++ sfl = &sflash;
++ switch (sfl->type) {
++ case SFLASH_ST:
++ mask = R_REG(NULL, &cc->chipid);
++ is4712b0 = (((mask & CID_ID_MASK) == BCM4712_CHIP_ID) &&
++ ((mask & CID_REV_MASK) == (3 << CID_REV_SHIFT)));
++ /* Enable writes */
++ sflash_cmd(cc, SFLASH_ST_WREN);
++ if (is4712b0) {
++ mask = 1 << 14;
++ W_REG(NULL, &cc->flashaddress, offset);
++ W_REG(NULL, &cc->flashdata, *buf++);
++ /* Set chip select */
++ OR_REG(NULL, &cc->gpioout, mask);
++ /* Issue a page program with the first byte */
++ sflash_cmd(cc, SFLASH_ST_PP);
++ ret = 1;
++ offset++;
++ len--;
++ while (len > 0) {
++ if ((offset & 255) == 0) {
++ /* Page boundary, drop cs and return */
++ AND_REG(NULL, &cc->gpioout, ~mask);
++ if (!sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -11;
++ }
++ return ret;
++ } else {
++ /* Write single byte */
++ sflash_cmd(cc, *buf++);
++ }
++ ret++;
++ offset++;
++ len--;
++ }
++ /* All done, drop cs if needed */
++ if ((offset & 255) != 1) {
++ /* Drop cs */
++ AND_REG(NULL, &cc->gpioout, ~mask);
++ if (!sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -12;
++ }
++ }
++ } else {
++ ret = 1;
++ W_REG(NULL, &cc->flashaddress, offset);
++ W_REG(NULL, &cc->flashdata, *buf);
++ /* Page program */
++ sflash_cmd(cc, SFLASH_ST_PP);
++ }
++ break;
++ case SFLASH_AT:
++ mask = sfl->blocksize - 1;
++ page = (offset & ~mask) << 1;
++ byte = offset & mask;
++ /* Read main memory page into buffer 1 */
++ if (byte || (len < sfl->blocksize)) {
++ W_REG(NULL, &cc->flashaddress, page);
++ sflash_cmd(cc, SFLASH_AT_BUF1_LOAD);
++ /* 250 us for AT45DB321B */
++ SPINWAIT(sflash_poll(cc, offset), 1000);
++ ASSERT(!sflash_poll(cc, offset));
++ }
++ /* Write into buffer 1 */
++ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
++ W_REG(NULL, &cc->flashaddress, byte++);
++ W_REG(NULL, &cc->flashdata, *buf++);
++ sflash_cmd(cc, SFLASH_AT_BUF1_WRITE);
++ }
++ /* Write buffer 1 into main memory page */
++ W_REG(NULL, &cc->flashaddress, page);
++ sflash_cmd(cc, SFLASH_AT_BUF1_PROGRAM);
++ break;
++ }
++
++ return ret;
++}
++
++/* Erase a region. Returns number of bytes scheduled for erasure.
++ * Caller should poll for completion.
++ */
++int
++sflash_erase(chipcregs_t *cc, uint offset)
++{
++ struct sflash *sfl;
++
++ if (offset >= sflash.size)
++ return -22;
++
++ sfl = &sflash;
++ switch (sfl->type) {
++ case SFLASH_ST:
++ sflash_cmd(cc, SFLASH_ST_WREN);
++ W_REG(NULL, &cc->flashaddress, offset);
++ sflash_cmd(cc, SFLASH_ST_SE);
++ return sfl->blocksize;
++ case SFLASH_AT:
++ W_REG(NULL, &cc->flashaddress, offset << 1);
++ sflash_cmd(cc, SFLASH_AT_PAGE_ERASE);
++ return sfl->blocksize;
++ }
++
++ return 0;
++}
++
++/*
++ * writes the appropriate range of flash, a NULL buf simply erases
++ * the region of flash
++ */
++int
++sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf)
++{
++ struct sflash *sfl;
++ uchar *block = NULL, *cur_ptr, *blk_ptr;
++ uint blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
++ uint blk_offset, blk_len, copied;
++ int bytes, ret = 0;
++
++ /* Check address range */
++ if (len <= 0)
++ return 0;
++
++ sfl = &sflash;
++ if ((offset + len) > sfl->size)
++ return -1;
++
++ blocksize = sfl->blocksize;
++ mask = blocksize - 1;
++
++ /* Allocate a block of mem */
++ if (!(block = MALLOC(NULL, blocksize)))
++ return -1;
++
++ while (len) {
++ /* Align offset */
++ cur_offset = offset & ~mask;
++ cur_length = blocksize;
++ cur_ptr = block;
++
++ remainder = blocksize - (offset & mask);
++ if (len < remainder)
++ cur_retlen = len;
++ else
++ cur_retlen = remainder;
++
++ /* buf == NULL means erase only */
++ if (buf) {
++ /* Copy existing data into holding block if necessary */
++ if ((offset & mask) || (len < blocksize)) {
++ blk_offset = cur_offset;
++ blk_len = cur_length;
++ blk_ptr = cur_ptr;
++
++ /* Copy entire block */
++ while (blk_len) {
++ copied = sflash_read(cc, blk_offset, blk_len, blk_ptr);
++ blk_offset += copied;
++ blk_len -= copied;
++ blk_ptr += copied;
++ }
++ }
++
++ /* Copy input data into holding block */
++ memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
++ }
++
++ /* Erase block */
++ if ((ret = sflash_erase(cc, (uint) cur_offset)) < 0)
++ goto done;
++ while (sflash_poll(cc, (uint) cur_offset));
++
++ /* buf == NULL means erase only */
++ if (!buf) {
++ offset += cur_retlen;
++ len -= cur_retlen;
++ continue;
++ }
++
++ /* Write holding block */
++ while (cur_length > 0) {
++ if ((bytes = sflash_write(cc,
++ (uint) cur_offset,
++ (uint) cur_length,
++ (uchar *) cur_ptr)) < 0) {
++ ret = bytes;
++ goto done;
++ }
++ while (sflash_poll(cc, (uint) cur_offset));
++ cur_offset += bytes;
++ cur_length -= bytes;
++ cur_ptr += bytes;
++ }
++
++ offset += cur_retlen;
++ len -= cur_retlen;
++ buf += cur_retlen;
++ }
++
++ ret = len;
++done:
++ if (block)
++ MFREE(NULL, block, blocksize);
++ return ret;
++}
+diff -urN linux.old/arch/mips/bcm947xx/time.c linux.dev/arch/mips/bcm947xx/time.c
+--- linux.old/arch/mips/bcm947xx/time.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/time.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,104 @@
++/*
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: time.c,v 1.1.1.10 2006/02/27 03:42:55 honor Exp $
++ */
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/serial_reg.h>
++#include <linux/interrupt.h>
++#include <asm/addrspace.h>
++#include <asm/io.h>
++#include <asm/time.h>
++
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmnvram.h>
++#include <sbconfig.h>
++#include <sbextif.h>
++#include <sbutils.h>
++#include <hndmips.h>
++#include <mipsinc.h>
++#include <hndcpu.h>
++
++/* Global SB handle */
++extern void *bcm947xx_sbh;
++extern spinlock_t bcm947xx_sbh_lock;
++
++/* Convenience */
++#define sbh bcm947xx_sbh
++#define sbh_lock bcm947xx_sbh_lock
++
++extern int panic_timeout;
++static int watchdog = 0;
++static u8 *mcr = NULL;
++
++void __init
++bcm947xx_time_init(void)
++{
++ unsigned int hz;
++ extifregs_t *eir;
++
++ /*
++ * Use deterministic values for initial counter interrupt
++ * so that calibrate delay avoids encountering a counter wrap.
++ */
++ write_c0_count(0);
++ write_c0_compare(0xffff);
++
++ if (!(hz = sb_cpu_clock(sbh)))
++ hz = 100000000;
++
++ printk("CPU: BCM%04x rev %d at %d MHz\n", sb_chip(sbh), sb_chiprev(sbh),
++ (hz + 500000) / 1000000);
++
++ /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */
++ mips_hpt_frequency = hz / 2;
++
++ /* Set watchdog interval in ms */
++ watchdog = simple_strtoul(nvram_safe_get("watchdog"), NULL, 0);
++
++ /* Please set the watchdog to 3 sec if it is less than 3 but not equal to 0 */
++ if (watchdog > 0) {
++ if (watchdog < 3000)
++ watchdog = 3000;
++ }
++
++ /* Set panic timeout in seconds */
++ panic_timeout = watchdog / 1000;
++}
++
++static void
++bcm947xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
++{
++ /* Generic MIPS timer code */
++ timer_interrupt(irq, dev_id, regs);
++
++ /* Set the watchdog timer to reset after the specified number of ms */
++ if (watchdog > 0)
++ sb_watchdog(sbh, WATCHDOG_CLOCK / 1000 * watchdog);
++}
++
++static struct irqaction bcm947xx_timer_irqaction = {
++ bcm947xx_timer_interrupt,
++ SA_INTERRUPT,
++ 0,
++ "timer",
++ NULL,
++ NULL
++};
++
++void __init
++bcm947xx_timer_setup(struct irqaction *irq)
++{
++ /* Enable the timer interrupt */
++ setup_irq(7, &bcm947xx_timer_irqaction);
++}
+diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared.in
+--- linux.old/arch/mips/config-shared.in 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/arch/mips/config-shared.in 2006-10-02 21:19:59.000000000 +0200
+@@ -208,6 +208,14 @@
+ fi
+ define_bool CONFIG_MIPS_RTC y
+ fi
++dep_bool 'Support for Broadcom MIPS-based boards' CONFIG_MIPS_BRCM $CONFIG_EXPERIMENTAL
++dep_bool 'Support for Broadcom BCM947XX' CONFIG_BCM947XX $CONFIG_MIPS_BRCM
++if [ "$CONFIG_BCM947XX" = "y" ] ; then
++ bool ' Support for Broadcom BCM4710' CONFIG_BCM4710
++ bool ' Support for Broadcom BCM4310' CONFIG_BCM4310
++ bool ' Support for Broadcom BCM4704' CONFIG_BCM4704
++ bool ' Support for Broadcom BCM5365' CONFIG_BCM5365
++fi
+ bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI
+ bool 'Support for TANBAC TB0226 (Mbase)' CONFIG_TANBAC_TB0226
+ bool 'Support for TANBAC TB0229 (VR4131DIMM)' CONFIG_TANBAC_TB0229
+@@ -229,6 +237,11 @@
+ define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
+
+ #
++# Provide an option for a default kernel command line
++#
++string 'Default kernel command string' CONFIG_CMDLINE ""
++
++#
+ # Select some configuration options automatically based on user selections.
+ #
+ if [ "$CONFIG_ACER_PICA_61" = "y" ]; then
+@@ -554,6 +567,12 @@
+ define_bool CONFIG_SWAP_IO_SPACE_L y
+ define_bool CONFIG_BOOT_ELF32 y
+ fi
++if [ "$CONFIG_BCM947XX" = "y" ] ; then
++ define_bool CONFIG_PCI y
++ define_bool CONFIG_NONCOHERENT_IO y
++ define_bool CONFIG_NEW_TIME_C y
++ define_bool CONFIG_NEW_IRQ y
++fi
+ if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then
+ define_bool CONFIG_ARC32 y
+ define_bool CONFIG_ARC_MEMORY y
+@@ -1042,7 +1061,11 @@
+
+ bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
+ bool 'Enable run-time debugging' CONFIG_RUNTIME_DEBUG
+-bool 'Remote GDB kernel debugging' CONFIG_KGDB
++if [ "$CONFIG_BCM947XX" = "y" ] ; then
++ bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
++else
++ bool 'Remote GDB kernel debugging' CONFIG_KGDB
++fi
+ dep_bool ' Console output to GDB' CONFIG_GDB_CONSOLE $CONFIG_KGDB
+ if [ "$CONFIG_KGDB" = "y" ]; then
+ define_bool CONFIG_DEBUG_INFO y
+diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c
+--- linux.old/arch/mips/kernel/cpu-probe.c 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/arch/mips/kernel/cpu-probe.c 2006-10-02 21:19:59.000000000 +0200
+@@ -162,7 +162,7 @@
+
+ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
+ {
+- switch (c->processor_id & 0xff00) {
++ switch (c->processor_id & PRID_IMP_MASK) {
+ case PRID_IMP_R2000:
+ c->cputype = CPU_R2000;
+ c->isa_level = MIPS_CPU_ISA_I;
+@@ -172,7 +172,7 @@
+ c->tlbsize = 64;
+ break;
+ case PRID_IMP_R3000:
+- if ((c->processor_id & 0xff) == PRID_REV_R3000A)
++ if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A)
+ if (cpu_has_confreg())
+ c->cputype = CPU_R3081E;
+ else
+@@ -187,12 +187,12 @@
+ break;
+ case PRID_IMP_R4000:
+ if (read_c0_config() & CONF_SC) {
+- if ((c->processor_id & 0xff) >= PRID_REV_R4400)
++ if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400)
+ c->cputype = CPU_R4400PC;
+ else
+ c->cputype = CPU_R4000PC;
+ } else {
+- if ((c->processor_id & 0xff) >= PRID_REV_R4400)
++ if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400)
+ c->cputype = CPU_R4400SC;
+ else
+ c->cputype = CPU_R4000SC;
+@@ -438,7 +438,7 @@
+ static inline void cpu_probe_mips(struct cpuinfo_mips *c)
+ {
+ decode_config1(c);
+- switch (c->processor_id & 0xff00) {
++ switch (c->processor_id & PRID_IMP_MASK) {
+ case PRID_IMP_4KC:
+ c->cputype = CPU_4KC;
+ c->isa_level = MIPS_CPU_ISA_M32;
+@@ -479,10 +479,10 @@
+ {
+ decode_config1(c);
+ c->options |= MIPS_CPU_PREFETCH;
+- switch (c->processor_id & 0xff00) {
++ switch (c->processor_id & PRID_IMP_MASK) {
+ case PRID_IMP_AU1_REV1:
+ case PRID_IMP_AU1_REV2:
+- switch ((c->processor_id >> 24) & 0xff) {
++ switch ((c->processor_id >> 24) & PRID_REV_MASK) {
+ case 0:
+ c->cputype = CPU_AU1000;
+ break;
+@@ -510,10 +510,34 @@
+ }
+ }
+
++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
++{
++ decode_config1(c);
++ c->options |= MIPS_CPU_PREFETCH;
++ switch (c->processor_id & PRID_IMP_MASK) {
++ case PRID_IMP_BCM4710:
++ c->cputype = CPU_BCM4710;
++ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
++ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
++ c->scache.flags = MIPS_CACHE_NOT_PRESENT;
++ break;
++ case PRID_IMP_4KC:
++ case PRID_IMP_BCM3302:
++ c->cputype = CPU_BCM3302;
++ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
++ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
++ c->scache.flags = MIPS_CACHE_NOT_PRESENT;
++ break;
++ default:
++ c->cputype = CPU_UNKNOWN;
++ break;
++ }
++}
++
+ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
+ {
+ decode_config1(c);
+- switch (c->processor_id & 0xff00) {
++ switch (c->processor_id & PRID_IMP_MASK) {
+ case PRID_IMP_SB1:
+ c->cputype = CPU_SB1;
+ c->isa_level = MIPS_CPU_ISA_M64;
+@@ -535,7 +559,7 @@
+ static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
+ {
+ decode_config1(c);
+- switch (c->processor_id & 0xff00) {
++ switch (c->processor_id & PRID_IMP_MASK) {
+ case PRID_IMP_SR71000:
+ c->cputype = CPU_SR71000;
+ c->isa_level = MIPS_CPU_ISA_M64;
+@@ -560,7 +584,7 @@
+ c->cputype = CPU_UNKNOWN;
+
+ c->processor_id = read_c0_prid();
+- switch (c->processor_id & 0xff0000) {
++ switch (c->processor_id & PRID_COMP_MASK) {
+
+ case PRID_COMP_LEGACY:
+ cpu_probe_legacy(c);
+@@ -571,6 +595,9 @@
+ case PRID_COMP_ALCHEMY:
+ cpu_probe_alchemy(c);
+ break;
++ case PRID_COMP_BROADCOM:
++ cpu_probe_broadcom(c);
++ break;
+ case PRID_COMP_SIBYTE:
+ cpu_probe_sibyte(c);
+ break;
+diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
+--- linux.old/arch/mips/kernel/head.S 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/arch/mips/kernel/head.S 2006-10-02 21:19:59.000000000 +0200
+@@ -28,12 +28,20 @@
+ #include <asm/mipsregs.h>
+ #include <asm/stackframe.h>
+
++#ifdef CONFIG_BCM4710
++#undef eret
++#define eret nop; nop; eret
++#endif
++
+ .text
++ j kernel_entry
++ nop
++
+ /*
+ * Reserved space for exception handlers.
+ * Necessary for machines which link their kernels at KSEG0.
+ */
+- .fill 0x400
++ .fill 0x3f4
+
+ /* The following two symbols are used for kernel profiling. */
+ EXPORT(stext)
+diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c
+--- linux.old/arch/mips/kernel/proc.c 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/arch/mips/kernel/proc.c 2006-10-02 21:19:59.000000000 +0200
+@@ -78,9 +78,10 @@
+ [CPU_AU1550] "Au1550",
+ [CPU_24K] "MIPS 24K",
+ [CPU_AU1200] "Au1200",
++ [CPU_BCM4710] "BCM4710",
++ [CPU_BCM3302] "BCM3302",
+ };
+
+-
+ static int show_cpuinfo(struct seq_file *m, void *v)
+ {
+ unsigned int version = current_cpu_data.processor_id;
+diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c
+--- linux.old/arch/mips/kernel/setup.c 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/arch/mips/kernel/setup.c 2006-10-02 21:19:59.000000000 +0200
+@@ -493,6 +493,7 @@
+ void swarm_setup(void);
+ void hp_setup(void);
+ void au1x00_setup(void);
++ void brcm_setup(void);
+ void frame_info_init(void);
+
+ frame_info_init();
+@@ -691,6 +692,11 @@
+ pmc_yosemite_setup();
+ break;
+ #endif
++#if defined(CONFIG_BCM4710) || defined(CONFIG_BCM4310)
++ case MACH_GROUP_BRCM:
++ brcm_setup();
++ break;
++#endif
+ default:
+ panic("Unsupported architecture");
+ }
+diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c
+--- linux.old/arch/mips/kernel/traps.c 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/arch/mips/kernel/traps.c 2006-10-02 21:19:59.000000000 +0200
+@@ -920,6 +920,7 @@
+ void __init trap_init(void)
+ {
+ extern char except_vec1_generic;
++ extern char except_vec2_generic;
+ extern char except_vec3_generic, except_vec3_r4000;
+ extern char except_vec_ejtag_debug;
+ extern char except_vec4;
+@@ -927,6 +928,7 @@
+
+ /* Copy the generic exception handler code to it's final destination. */
+ memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80);
++ memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80);
+
+ /*
+ * Setup default vectors
+@@ -985,6 +987,12 @@
+ set_except_vector(13, handle_tr);
+ set_except_vector(22, handle_mdmx);
+
++ if (current_cpu_data.cputype == CPU_SB1) {
++ /* Enable timer interrupt and scd mapped interrupt */
++ clear_c0_status(0xf000);
++ set_c0_status(0xc00);
++ }
++
+ if (cpu_has_fpu && !cpu_has_nofpuex)
+ set_except_vector(15, handle_fpe);
+
+diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
+--- linux.old/arch/mips/Makefile 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/arch/mips/Makefile 2006-10-02 21:19:59.000000000 +0200
+@@ -726,6 +726,19 @@
+ endif
+
+ #
++# Broadcom BCM947XX variants
++#
++ifdef CONFIG_BCM947XX
++LIBS += arch/mips/bcm947xx/generic/brcm.o arch/mips/bcm947xx/bcm947xx.o
++SUBDIRS += arch/mips/bcm947xx/generic arch/mips/bcm947xx
++LOADADDR := 0x80001000
++
++zImage: vmlinux
++ $(MAKE) -C arch/$(ARCH)/bcm947xx/compressed
++export LOADADDR
++endif
++
++#
+ # Choosing incompatible machines durings configuration will result in
+ # error messages during linking. Select a default linkscript if
+ # none has been choosen above.
+@@ -778,6 +791,7 @@
+ $(MAKE) -C arch/$(ARCH)/tools clean
+ $(MAKE) -C arch/mips/baget clean
+ $(MAKE) -C arch/mips/lasat clean
++ $(MAKE) -C arch/mips/bcm947xx/compressed clean
+
+ archmrproper:
+ @$(MAKEBOOT) mrproper
+diff -urN linux.old/arch/mips/mm/c-r4k.c linux.dev/arch/mips/mm/c-r4k.c
+--- linux.old/arch/mips/mm/c-r4k.c 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/arch/mips/mm/c-r4k.c 2006-10-02 21:19:59.000000000 +0200
+@@ -1166,3 +1166,47 @@
+ build_clear_page();
+ build_copy_page();
+ }
++
++#ifdef CONFIG_BCM4704
++static void __init mips32_icache_fill(unsigned long addr, uint nbytes)
++{
++ unsigned long ic_lsize = current_cpu_data.icache.linesz;
++ int i;
++ for (i = 0; i < nbytes; i += ic_lsize)
++ fill_icache_line((addr + i));
++}
++
++/*
++ * This must be run from the cache on 4704A0
++ * so there are no mips core BIU ops in progress
++ * when the PFC is enabled.
++ */
++#define PFC_CR0 0xff400000 /* control reg 0 */
++#define PFC_CR1 0xff400004 /* control reg 1 */
++static void __init enable_pfc(u32 mode)
++{
++ /* write range */
++ *(volatile u32 *)PFC_CR1 = 0xffff0000;
++
++ /* enable */
++ *(volatile u32 *)PFC_CR0 = mode;
++}
++#endif
++
++
++void check_enable_mips_pfc(int val)
++{
++
++#ifdef CONFIG_BCM4704
++ struct cpuinfo_mips *c = &current_cpu_data;
++
++ /* enable prefetch cache */
++ if (((c->processor_id & (PRID_COMP_MASK | PRID_IMP_MASK)) == PRID_IMP_BCM3302)
++ && (read_c0_diag() & (1 << 29))) {
++ mips32_icache_fill((unsigned long) &enable_pfc, 64);
++ enable_pfc(val);
++ }
++#endif
++}
++
++
+diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile
+--- linux.old/arch/mips/pci/Makefile 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/arch/mips/pci/Makefile 2006-10-02 21:19:59.000000000 +0200
+@@ -13,7 +13,9 @@
+ obj-$(CONFIG_MIPS_MSC) += ops-msc.o
+ obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
+ obj-$(CONFIG_SNI_RM200_PCI) += ops-sni.o
++ifndef CONFIG_BCM947XX
+ obj-y += pci.o
++endif
+ obj-$(CONFIG_PCI_AUTO) += pci_auto.o
+
+ include $(TOPDIR)/Rules.make
+diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c
+--- linux.old/drivers/char/serial.c 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/drivers/char/serial.c 2006-10-02 21:19:59.000000000 +0200
+@@ -444,6 +444,10 @@
+ return inb(info->port+1);
+ #endif
+ case SERIAL_IO_MEM:
++#ifdef CONFIG_BCM4310
++ readb((unsigned long) info->iomem_base +
++ (UART_SCR<<info->iomem_reg_shift));
++#endif
+ return readb((unsigned long) info->iomem_base +
+ (offset<<info->iomem_reg_shift));
+ default:
+@@ -464,6 +468,9 @@
+ case SERIAL_IO_MEM:
+ writeb(value, (unsigned long) info->iomem_base +
+ (offset<<info->iomem_reg_shift));
++#ifdef CONFIG_BCM4704
++ *((volatile unsigned int *) KSEG1ADDR(0x18000000));
++#endif
+ break;
+ default:
+ outb(value, info->port+offset);
+@@ -1728,7 +1735,7 @@
+ /* Special case since 134 is really 134.5 */
+ quot = (2*baud_base / 269);
+ else if (baud)
+- quot = baud_base / baud;
++ quot = (baud_base + (baud / 2)) / baud;
+ }
+ /* If the quotient is zero refuse the change */
+ if (!quot && old_termios) {
+@@ -1745,12 +1752,12 @@
+ /* Special case since 134 is really 134.5 */
+ quot = (2*baud_base / 269);
+ else if (baud)
+- quot = baud_base / baud;
++ quot = (baud_base + (baud / 2)) / baud;
+ }
+ }
+ /* As a last resort, if the quotient is zero, default to 9600 bps */
+ if (!quot)
+- quot = baud_base / 9600;
++ quot = (baud_base + 4800) / 9600;
+ /*
+ * Work around a bug in the Oxford Semiconductor 952 rev B
+ * chip which causes it to seriously miscalculate baud rates
+@@ -5994,6 +6001,13 @@
+ * Divisor, bytesize and parity
+ */
+ state = rs_table + co->index;
++ /*
++ * Safe guard: state structure must have been initialized
++ */
++ if (state->iomem_base == NULL) {
++ printk("!unable to setup serial console!\n");
++ return -1;
++ }
+ if (doflow)
+ state->flags |= ASYNC_CONS_FLOW;
+ info = &async_sercons;
+@@ -6007,7 +6021,7 @@
+ info->io_type = state->io_type;
+ info->iomem_base = state->iomem_base;
+ info->iomem_reg_shift = state->iomem_reg_shift;
+- quot = state->baud_base / baud;
++ quot = (state->baud_base + (baud / 2)) / baud;
+ cval = cflag & (CSIZE | CSTOPB);
+ #if defined(__powerpc__) || defined(__alpha__)
+ cval >>= 8;
+diff -urN linux.old/drivers/net/Makefile linux.dev/drivers/net/Makefile
+--- linux.old/drivers/net/Makefile 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/drivers/net/Makefile 2006-10-02 21:19:59.000000000 +0200
+@@ -3,6 +3,8 @@
+ # Makefile for the Linux network (ethercard) device drivers.
+ #
+
++EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
++
+ obj-y :=
+ obj-m :=
+ obj-n :=
+diff -urN linux.old/drivers/parport/Config.in linux.dev/drivers/parport/Config.in
+--- linux.old/drivers/parport/Config.in 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/drivers/parport/Config.in 2006-10-02 21:19:59.000000000 +0200
+@@ -11,6 +11,7 @@
+ tristate 'Parallel port support' CONFIG_PARPORT
+ if [ "$CONFIG_PARPORT" != "n" ]; then
+ dep_tristate ' PC-style hardware' CONFIG_PARPORT_PC $CONFIG_PARPORT
++ dep_tristate ' Asus WL500g parallel port' CONFIG_PARPORT_SPLINK $CONFIG_PARPORT
+ if [ "$CONFIG_PARPORT_PC" != "n" -a "$CONFIG_SERIAL" != "n" ]; then
+ if [ "$CONFIG_SERIAL" = "m" ]; then
+ define_tristate CONFIG_PARPORT_PC_CML1 m
+diff -urN linux.old/drivers/parport/Makefile linux.dev/drivers/parport/Makefile
+--- linux.old/drivers/parport/Makefile 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/drivers/parport/Makefile 2006-10-02 21:19:59.000000000 +0200
+@@ -22,6 +22,7 @@
+
+ obj-$(CONFIG_PARPORT) += parport.o
+ obj-$(CONFIG_PARPORT_PC) += parport_pc.o
++obj-$(CONFIG_PARPORT_SPLINK) += parport_splink.o
+ obj-$(CONFIG_PARPORT_PC_PCMCIA) += parport_cs.o
+ obj-$(CONFIG_PARPORT_AMIGA) += parport_amiga.o
+ obj-$(CONFIG_PARPORT_MFC3) += parport_mfc3.o
+diff -urN linux.old/drivers/parport/parport_splink.c linux.dev/drivers/parport/parport_splink.c
+--- linux.old/drivers/parport/parport_splink.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/parport/parport_splink.c 2006-10-02 21:19:59.000000000 +0200
+@@ -0,0 +1,345 @@
++/* Low-level parallel port routines for the ASUS WL-500g built-in port
++ *
++ * Author: Nuno Grilo <nuno.grilo@netcabo.pt>
++ * Based on parport_pc source
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/parport.h>
++#include <linux/parport_pc.h>
++
++#define SPLINK_ADDRESS 0xBF800010
++
++#undef DEBUG
++
++#ifdef DEBUG
++#define DPRINTK printk
++#else
++#define DPRINTK(stuff...)
++#endif
++
++
++/* __parport_splink_frob_control differs from parport_splink_frob_control in that
++ * it doesn't do any extra masking. */
++static __inline__ unsigned char __parport_splink_frob_control (struct parport *p,
++ unsigned char mask,
++ unsigned char val)
++{
++ struct parport_pc_private *priv = p->physport->private_data;
++ unsigned char *io = (unsigned char *) p->base;
++ unsigned char ctr = priv->ctr;
++#ifdef DEBUG_PARPORT
++ printk (KERN_DEBUG
++ "__parport_splink_frob_control(%02x,%02x): %02x -> %02x\n",
++ mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
++#endif
++ ctr = (ctr & ~mask) ^ val;
++ ctr &= priv->ctr_writable; /* only write writable bits. */
++ *(io+2) = ctr;
++ priv->ctr = ctr; /* Update soft copy */
++ return ctr;
++}
++
++
++
++static void parport_splink_data_forward (struct parport *p)
++{
++ DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n");
++ __parport_splink_frob_control (p, 0x20, 0);
++}
++
++static void parport_splink_data_reverse (struct parport *p)
++{
++ DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n");
++ __parport_splink_frob_control (p, 0x20, 0x20);
++}
++
++/*
++static void parport_splink_interrupt(int irq, void *dev_id, struct pt_regs *regs)
++{
++ DPRINTK(KERN_DEBUG "parport_splink: IRQ handler called\n");
++ parport_generic_irq(irq, (struct parport *) dev_id, regs);
++}
++*/
++
++static void parport_splink_enable_irq(struct parport *p)
++{
++ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_enable_irq called\n");
++ __parport_splink_frob_control (p, 0x10, 0x10);
++}
++
++static void parport_splink_disable_irq(struct parport *p)
++{
++ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_disable_irq called\n");
++ __parport_splink_frob_control (p, 0x10, 0);
++}
++
++static void parport_splink_init_state(struct pardevice *dev, struct parport_state *s)
++{
++ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_init_state called\n");
++ s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0);
++ if (dev->irq_func &&
++ dev->port->irq != PARPORT_IRQ_NONE)
++ /* Set ackIntEn */
++ s->u.pc.ctr |= 0x10;
++}
++
++static void parport_splink_save_state(struct parport *p, struct parport_state *s)
++{
++ const struct parport_pc_private *priv = p->physport->private_data;
++ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_save_state called\n");
++ s->u.pc.ctr = priv->ctr;
++}
++
++static void parport_splink_restore_state(struct parport *p, struct parport_state *s)
++{
++ struct parport_pc_private *priv = p->physport->private_data;
++ unsigned char *io = (unsigned char *) p->base;
++ unsigned char ctr = s->u.pc.ctr;
++
++ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_restore_state called\n");
++ *(io+2) = ctr;
++ priv->ctr = ctr;
++}
++
++static void parport_splink_setup_interrupt(void) {
++ return;
++}
++
++static void parport_splink_write_data(struct parport *p, unsigned char d) {
++ DPRINTK(KERN_DEBUG "parport_splink: write data called\n");
++ unsigned char *io = (unsigned char *) p->base;
++ *io = d;
++}
++
++static unsigned char parport_splink_read_data(struct parport *p) {
++ DPRINTK(KERN_DEBUG "parport_splink: read data called\n");
++ unsigned char *io = (unsigned char *) p->base;
++ return *io;
++}
++
++static void parport_splink_write_control(struct parport *p, unsigned char d)
++{
++ const unsigned char wm = (PARPORT_CONTROL_STROBE |
++ PARPORT_CONTROL_AUTOFD |
++ PARPORT_CONTROL_INIT |
++ PARPORT_CONTROL_SELECT);
++
++ DPRINTK(KERN_DEBUG "parport_splink: write control called\n");
++ /* Take this out when drivers have adapted to the newer interface. */
++ if (d & 0x20) {
++ printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
++ p->name, p->cad->name);
++ parport_splink_data_reverse (p);
++ }
++
++ __parport_splink_frob_control (p, wm, d & wm);
++}
++
++static unsigned char parport_splink_read_control(struct parport *p)
++{
++ const unsigned char wm = (PARPORT_CONTROL_STROBE |
++ PARPORT_CONTROL_AUTOFD |
++ PARPORT_CONTROL_INIT |
++ PARPORT_CONTROL_SELECT);
++ DPRINTK(KERN_DEBUG "parport_splink: read control called\n");
++ const struct parport_pc_private *priv = p->physport->private_data;
++ return priv->ctr & wm; /* Use soft copy */
++}
++
++static unsigned char parport_splink_frob_control (struct parport *p, unsigned char mask,
++ unsigned char val)
++{
++ const unsigned char wm = (PARPORT_CONTROL_STROBE |
++ PARPORT_CONTROL_AUTOFD |
++ PARPORT_CONTROL_INIT |
++ PARPORT_CONTROL_SELECT);
++
++ DPRINTK(KERN_DEBUG "parport_splink: frob control called\n");
++ /* Take this out when drivers have adapted to the newer interface. */
++ if (mask & 0x20) {
++ printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
++ p->name, p->cad->name,
++ (val & 0x20) ? "reverse" : "forward");
++ if (val & 0x20)
++ parport_splink_data_reverse (p);
++ else
++ parport_splink_data_forward (p);
++ }
++
++ /* Restrict mask and val to control lines. */
++ mask &= wm;
++ val &= wm;
++
++ return __parport_splink_frob_control (p, mask, val);
++}
++
++static unsigned char parport_splink_read_status(struct parport *p)
++{
++ DPRINTK(KERN_DEBUG "parport_splink: read status called\n");
++ unsigned char *io = (unsigned char *) p->base;
++ return *(io+1);
++}
++
++static void parport_splink_inc_use_count(void)
++{
++#ifdef MODULE
++ MOD_INC_USE_COUNT;
++#endif
++}
++
++static void parport_splink_dec_use_count(void)
++{
++#ifdef MODULE
++ MOD_DEC_USE_COUNT;
++#endif
++}
++
++static struct parport_operations parport_splink_ops =
++{
++ parport_splink_write_data,
++ parport_splink_read_data,
++
++ parport_splink_write_control,
++ parport_splink_read_control,
++ parport_splink_frob_control,
++
++ parport_splink_read_status,
++
++ parport_splink_enable_irq,
++ parport_splink_disable_irq,
++
++ parport_splink_data_forward,
++ parport_splink_data_reverse,
++
++ parport_splink_init_state,
++ parport_splink_save_state,
++ parport_splink_restore_state,
++
++ parport_splink_inc_use_count,
++ parport_splink_dec_use_count,
++
++ parport_ieee1284_epp_write_data,
++ parport_ieee1284_epp_read_data,
++ parport_ieee1284_epp_write_addr,
++ parport_ieee1284_epp_read_addr,
++
++ parport_ieee1284_ecp_write_data,
++ parport_ieee1284_ecp_read_data,
++ parport_ieee1284_ecp_write_addr,
++
++ parport_ieee1284_write_compat,
++ parport_ieee1284_read_nibble,
++ parport_ieee1284_read_byte,
++};
++
++/* --- Initialisation code -------------------------------- */
++
++static struct parport *parport_splink_probe_port (unsigned long int base)
++{
++ struct parport_pc_private *priv;
++ struct parport_operations *ops;
++ struct parport *p;
++
++ if (check_mem_region(base, 3)) {
++ printk (KERN_DEBUG "parport (0x%lx): iomem region not available\n", base);
++ return NULL;
++ }
++ priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL);
++ if (!priv) {
++ printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
++ return NULL;
++ }
++ ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL);
++ if (!ops) {
++ printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
++ base);
++ kfree (priv);
++ return NULL;
++ }
++ memcpy (ops, &parport_splink_ops, sizeof (struct parport_operations));
++ priv->ctr = 0xc;
++ priv->ctr_writable = 0xff;
++
++ if (!(p = parport_register_port(base, PARPORT_IRQ_NONE,
++ PARPORT_DMA_NONE, ops))) {
++ printk (KERN_DEBUG "parport (0x%lx): registration failed!\n",
++ base);
++ kfree (priv);
++ kfree (ops);
++ return NULL;
++ }
++
++ p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
++ p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
++ p->private_data = priv;
++
++ parport_proc_register(p);
++ request_mem_region (p->base, 3, p->name);
++
++ /* Done probing. Now put the port into a sensible start-up state. */
++ parport_splink_write_data(p, 0);
++ parport_splink_data_forward (p);
++
++ /* Now that we've told the sharing engine about the port, and
++ found out its characteristics, let the high-level drivers
++ know about it. */
++ parport_announce_port (p);
++
++ DPRINTK(KERN_DEBUG "parport (0x%lx): init ok!\n",
++ base);
++ return p;
++}
++
++static void parport_splink_unregister_port(struct parport *p) {
++ struct parport_pc_private *priv = p->private_data;
++ struct parport_operations *ops = p->ops;
++
++ if (p->irq != PARPORT_IRQ_NONE)
++ free_irq(p->irq, p);
++ release_mem_region(p->base, 3);
++ parport_proc_unregister(p);
++ kfree (priv);
++ parport_unregister_port(p);
++ kfree (ops);
++}
++
++
++int parport_splink_init(void)
++{
++ int ret;
++
++ DPRINTK(KERN_DEBUG "parport_splink init called\n");
++ parport_splink_setup_interrupt();
++ ret = !parport_splink_probe_port(SPLINK_ADDRESS);
++
++ return ret;
++}
++
++void parport_splink_cleanup(void) {
++ struct parport *p = parport_enumerate(), *tmp;
++ DPRINTK(KERN_DEBUG "parport_splink cleanup called\n");
++ if (p->size) {
++ if (p->modes & PARPORT_MODE_PCSPP) {
++ while(p) {
++ tmp = p->next;
++ parport_splink_unregister_port(p);
++ p = tmp;
++ }
++ }
++ }
++}
++
++MODULE_AUTHOR("Nuno Grilo <nuno.grilo@netcabo.pt>");
++MODULE_DESCRIPTION("Parport Driver for ASUS WL-500g router builtin Port");
++MODULE_SUPPORTED_DEVICE("ASUS WL-500g builtin Parallel Port");
++MODULE_LICENSE("GPL");
++
++module_init(parport_splink_init)
++module_exit(parport_splink_cleanup)
++
+diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
+--- linux.old/include/asm-mips/bootinfo.h 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/include/asm-mips/bootinfo.h 2006-10-02 21:19:59.000000000 +0200
+@@ -37,6 +37,7 @@
+ #define MACH_GROUP_HP_LJ 20 /* Hewlett Packard LaserJet */
+ #define MACH_GROUP_LASAT 21
+ #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */
++#define MACH_GROUP_BRCM 23 /* Broadcom */
+
+ /*
+ * Valid machtype values for group unknown (low order halfword of mips_machtype)
+@@ -197,6 +198,15 @@
+ #define MACH_TANBAC_TB0229 7 /* TANBAC TB0229 (VR4131DIMM) */
+
+ /*
++ * Valid machtypes for group Broadcom
++ */
++#define MACH_BCM93725 0
++#define MACH_BCM93725_VJ 1
++#define MACH_BCM93730 2
++#define MACH_BCM947XX 3
++#define MACH_BCM933XX 4
++
++/*
+ * Valid machtype for group TITAN
+ */
+ #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */
+diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h
+--- linux.old/include/asm-mips/cpu.h 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/include/asm-mips/cpu.h 2006-10-02 21:19:59.000000000 +0200
+@@ -22,6 +22,11 @@
+ spec.
+ */
+
++#define PRID_COPT_MASK 0xff000000
++#define PRID_COMP_MASK 0x00ff0000
++#define PRID_IMP_MASK 0x0000ff00
++#define PRID_REV_MASK 0x000000ff
++
+ #define PRID_COMP_LEGACY 0x000000
+ #define PRID_COMP_MIPS 0x010000
+ #define PRID_COMP_BROADCOM 0x020000
+@@ -58,6 +63,7 @@
+ #define PRID_IMP_RM7000 0x2700
+ #define PRID_IMP_NEVADA 0x2800 /* RM5260 ??? */
+ #define PRID_IMP_RM9000 0x3400
++#define PRID_IMP_BCM4710 0x4000
+ #define PRID_IMP_R5432 0x5400
+ #define PRID_IMP_R5500 0x5500
+ #define PRID_IMP_4KC 0x8000
+@@ -66,10 +72,16 @@
+ #define PRID_IMP_4KEC 0x8400
+ #define PRID_IMP_4KSC 0x8600
+ #define PRID_IMP_25KF 0x8800
++#define PRID_IMP_BCM3302 0x9000
++#define PRID_IMP_BCM3303 0x9100
+ #define PRID_IMP_24K 0x9300
+
+ #define PRID_IMP_UNKNOWN 0xff00
+
++#define BCM330X(id) \
++ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \
++ || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
++
+ /*
+ * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
+ */
+@@ -174,7 +186,9 @@
+ #define CPU_AU1550 57
+ #define CPU_24K 58
+ #define CPU_AU1200 59
+-#define CPU_LAST 59
++#define CPU_BCM4710 60
++#define CPU_BCM3302 61
++#define CPU_LAST 61
+
+ /*
+ * ISA Level encodings
+diff -urN linux.old/include/asm-mips/r4kcache.h linux.dev/include/asm-mips/r4kcache.h
+--- linux.old/include/asm-mips/r4kcache.h 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/include/asm-mips/r4kcache.h 2006-10-02 21:19:59.000000000 +0200
+@@ -658,4 +658,17 @@
+ cache128_unroll32(addr|ws,Index_Writeback_Inv_SD);
+ }
+
++extern inline void fill_icache_line(unsigned long addr)
++{
++ __asm__ __volatile__(
++ ".set noreorder\n\t"
++ ".set mips3\n\t"
++ "cache %1, (%0)\n\t"
++ ".set mips0\n\t"
++ ".set reorder"
++ :
++ : "r" (addr),
++ "i" (Fill));
++}
++
+ #endif /* __ASM_R4KCACHE_H */
+diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial.h
+--- linux.old/include/asm-mips/serial.h 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/include/asm-mips/serial.h 2006-10-02 21:19:59.000000000 +0200
+@@ -223,6 +223,13 @@
+ #define TXX927_SERIAL_PORT_DEFNS
+ #endif
+
++#ifdef CONFIG_BCM947XX
++/* reserve 4 ports to be configured at runtime */
++#define BCM947XX_SERIAL_PORT_DEFNS { 0, }, { 0, }, { 0, }, { 0, },
++#else
++#define BCM947XX_SERIAL_PORT_DEFNS
++#endif
++
+ #ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
+ #define STD_SERIAL_PORT_DEFNS \
+ /* UART CLK PORT IRQ FLAGS */ \
+@@ -470,6 +477,7 @@
+ #define SERIAL_PORT_DFNS \
+ ATLAS_SERIAL_PORT_DEFNS \
+ AU1000_SERIAL_PORT_DEFNS \
++ BCM947XX_SERIAL_PORT_DEFNS \
+ COBALT_SERIAL_PORT_DEFNS \
+ DDB5477_SERIAL_PORT_DEFNS \
+ EV96100_SERIAL_PORT_DEFNS \
+diff -urN linux.old/init/do_mounts.c linux.dev/init/do_mounts.c
+--- linux.old/init/do_mounts.c 2006-10-02 21:23:10.000000000 +0200
++++ linux.dev/init/do_mounts.c 2006-10-02 21:19:59.000000000 +0200
+@@ -254,7 +254,13 @@
+ { "ftlb", 0x2c08 },
+ { "ftlc", 0x2c10 },
+ { "ftld", 0x2c18 },
++#if defined(CONFIG_MTD_BLOCK) || defined(CONFIG_MTD_BLOCK_RO)
+ { "mtdblock", 0x1f00 },
++ { "mtdblock0",0x1f00 },
++ { "mtdblock1",0x1f01 },
++ { "mtdblock2",0x1f02 },
++ { "mtdblock3",0x1f03 },
++#endif
+ { "nb", 0x2b00 },
+ { NULL, 0 }
+ };