aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm-2.4/base-files
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2007-09-25 08:34:30 +0000
committerGabor Juhos <juhosg@openwrt.org>2007-09-25 08:34:30 +0000
commita3c80a1e6e2325af97356417c9c24f1c8f284342 (patch)
tree2077ad8a0d05fcf476bdffa5ab37c057c283749c /target/linux/brcm-2.4/base-files
parenta7bbfed7a2ed2349d7ce45c896e5f604bd268af9 (diff)
downloadupstream-a3c80a1e6e2325af97356417c9c24f1c8f284342.tar.gz
upstream-a3c80a1e6e2325af97356417c9c24f1c8f284342.tar.bz2
upstream-a3c80a1e6e2325af97356417c9c24f1c8f284342.zip
fix vlan configuration on Dell TrueMobile 2300
SVN-Revision: 9015
Diffstat (limited to 'target/linux/brcm-2.4/base-files')
-rwxr-xr-xtarget/linux/brcm-2.4/base-files/default/etc/init.d/netconfig14
1 files changed, 9 insertions, 5 deletions
diff --git a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
index 2b56963365..643ba35d31 100755
--- a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
@@ -47,11 +47,11 @@ start() {
mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
}
}
-
+
($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
nvram[$1] = $2
}
-
+
END {
if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
c["wan_ifname"] = ""
@@ -61,6 +61,10 @@ start() {
c["wan_ifname"] = "eth1"
c["lan_ifname"] = "eth0"
}
+ if (model == "Dell TrueMobile 2300") {
+ c["vlan0ports"] = "0 1 2 3 5*"
+ c["vlan1ports"] = "4 5"
+ }
if (nvram["boardtype"] == "bcm94710r4") {
# Toshiba WRC-1000
c["lan_ifname"] = "eth0"
@@ -100,10 +104,10 @@ start() {
c["lan_ifname"]="eth0"
c["wan_ifname"]=""
}
-
+
# ASUS WL-700gE
# These are actually same as defaults above. For some reason this script applies
- # Generic BCM94704 settings instead so we revert to proper settings here.
+ # Generic BCM94704 settings instead so we revert to proper settings here.
# Hopefully someone will fix this properly soon.
if (model == "ASUS WL-700gE") {
c["lan_ifname"]="eth0.0"
@@ -116,7 +120,7 @@ start() {
c["vlan0ports"]="0 1 2 3 5*"
c["vlan1ports"]="4 5"
}
-
+
print "#### VLAN configuration "
print "config switch eth0"
p("vlan0", "vlan0ports")