diff options
| author | Felix Fietkau <nbd@openwrt.org> | 2008-06-15 11:10:13 +0000 |
|---|---|---|
| committer | Felix Fietkau <nbd@openwrt.org> | 2008-06-15 11:10:13 +0000 |
| commit | 9621d872ca496eadb79399d0351abf96abc35338 (patch) | |
| tree | d4f8f3f7d0b264ff4d108cfeec1fe7562bb6ea52 /target/linux/brcm-2.4/base-files | |
| parent | f9ad520e37ea3ad98451848ab6c461f3fde8d077 (diff) | |
| download | upstream-9621d872ca496eadb79399d0351abf96abc35338.tar.gz upstream-9621d872ca496eadb79399d0351abf96abc35338.tar.bz2 upstream-9621d872ca496eadb79399d0351abf96abc35338.zip | |
(3/6) bcm57xx: preinit
This patch allows the bcm57xx module to work correctly with failsafe mode.
insmod doesn't return an error when a module loads but doesn't detect a switch.
I added the check_module function to load the module, then make sure
it doesn't just exit immediately. This allows preinit to only attempt to
load the bcm57xx module when switch-robo and switch-adm dont detect a switch.
The activate_gpio parameter to bcm57xx simply instructs the module to attempt
to activate the switch via gpio before probing for the switch.
Tested on wrt350n.
Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11468
Diffstat (limited to 'target/linux/brcm-2.4/base-files')
| -rwxr-xr-x | target/linux/brcm-2.4/base-files/etc/preinit.arch | 17 |
1 files changed, 14 insertions, 3 deletions
diff --git a/target/linux/brcm-2.4/base-files/etc/preinit.arch b/target/linux/brcm-2.4/base-files/etc/preinit.arch index 5127e6088b..1b3c924ced 100755 --- a/target/linux/brcm-2.4/base-files/etc/preinit.arch +++ b/target/linux/brcm-2.4/base-files/etc/preinit.arch @@ -4,7 +4,7 @@ failsafe() { lock /tmp/.failsafe failsafe_ip - echo "0 1 2 3 4 5u*" > /proc/switch/eth0/vlan/0/ports + echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports set_state failsafe [ -x "/usr/sbin/nvram" ] && { @@ -39,8 +39,19 @@ esac failsafe_ip +check_module () { + module="$1"; shift; params="$*" + + insmod "$module" "$params" + sleep 1 + grep "^$module" /proc/modules + return $? +} + insmod switch-core -insmod switch-robo || insmod switch-adm || rmmod switch-core +check_module switch-robo || check_module switch-adm || { + check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*" +} || rmmod switch-core [ -d /proc/switch/eth0 ] && { echo 1 > /proc/switch/eth0/reset @@ -48,7 +59,7 @@ insmod switch-robo || insmod switch-adm || rmmod switch-core # this would be easier if we blasted the message across all ports # but we don't want packets leaking across interfaces for port in $(seq 0 4); do { - echo "$port 5u*" > /proc/switch/eth0/vlan/0/ports + echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports netmsg 192.168.1.255 "Press reset now, to enter Failsafe!" }; done } || netmsg 192.168.1.255 "Press reset now, to enter Failsafe!" |