aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm-2.4/base-files
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2009-02-22 18:45:39 +0000
committerFelix Fietkau <nbd@openwrt.org>2009-02-22 18:45:39 +0000
commitd8d22d5816a9539dfc98449046140efc17b1011f (patch)
tree1ca921365d885d828f32fa5b41111b9d3d5dd032 /target/linux/brcm-2.4/base-files
parent5513e64b4b1133351dfb29ac42c80f5641ce2324 (diff)
downloadupstream-d8d22d5816a9539dfc98449046140efc17b1011f.tar.gz
upstream-d8d22d5816a9539dfc98449046140efc17b1011f.tar.bz2
upstream-d8d22d5816a9539dfc98449046140efc17b1011f.zip
Asus WL-330gE Support
Here is support for the compact Asus WL-330gE. It uses that all-in-one 5354 Broadcom chip that's also in the WL-520gU, so I assume USB support can be soldered on. I've yet to open up the device, though. Initial flashing is done through the CFE failsafe mode like on other Asus devices, where you boot holding the reset button, the power LED flashes, and you tftp an image. Signed-off-by: David Cooper <dave@kupesoft.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14624 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm-2.4/base-files')
-rwxr-xr-xtarget/linux/brcm-2.4/base-files/etc/init.d/netconfig36
1 files changed, 25 insertions, 11 deletions
diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index 44e2de25c9..a53209e06a 100755
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -57,6 +57,12 @@ start() {
c["wan_ifname"] = ""
c["lan_ifname"] = "eth1"
}
+ if (model == "ASUS WL-330gE") {
+ c["wan_ifname"] = ""
+ c["lan_ifname"] = "eth0"
+ c["vlan0ports"] = ""
+ c["vlan1ports"] = ""
+ }
if (model == "ASUS WL-500g") {
c["wan_ifname"] = "eth1"
c["lan_ifname"] = "eth0"
@@ -149,12 +155,14 @@ start() {
c["vlan1ports"] = ""
}
- print "#### VLAN configuration "
- print "config switch eth0"
- p("vlan0", "vlan0ports")
- p("vlan1", "vlan1ports")
- print ""
- print ""
+ if (c["vlan0ports"] || c["vlan1ports"]) {
+ print "#### VLAN configuration "
+ print "config switch eth0"
+ p("vlan0", "vlan0ports")
+ p("vlan1", "vlan1ports")
+ print ""
+ print ""
+ }
print "#### Loopback configuration"
print "config interface loopback"
print " option ifname \"lo\""
@@ -173,10 +181,16 @@ start() {
print " option netmask 255.255.255.0"
print ""
print ""
- print "#### WAN configuration"
- print "config interface wan"
- p("ifname", "wan_ifname")
- p("macaddr", "wan_macaddr")
- print " option proto dhcp"
+ if (c["wan_ifname"]) {
+ print "#### WAN configuration"
+ print "config interface wan"
+ p("ifname", "wan_ifname")
+ p("macaddr", "wan_macaddr")
+ print " option proto dhcp"
+ } else {
+ print "#### WAN configuration (disabled)"
+ print "#config interface wan"
+ print "# option proto dhcp"
+ }
}' > /etc/config/network
}