bmips: add subtargets for each SoC

BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one
with its own specific drivers, so instead of having a huge kernel supporting
all of them, let's switch to a subtarget per SoC like other OpenWrt targets.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

4 files changed, 0 insertions, 118 deletions

diff --git a/target/linux/bmips/nand/base-files/etc/board.d/01_leds b/target/linux/bmips/nand/base-files/etc/board.d/01_leds
deleted file mode 100644
index 3461eca10c..0000000000
--- a/target/linux/bmips/nand/base-files/etc/board.d/01_leds
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-. /lib/functions/leds.sh
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-led_usb="$(get_dt_led usb)"
-[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1"
-
-led_usb2="$(get_dt_led usb2)"
-[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1"
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/bmips/nand/base-files/etc/board.d/02_network b/target/linux/bmips/nand/base-files/etc/board.d/02_network
deleted file mode 100644
index 0e130103da..0000000000
--- a/target/linux/bmips/nand/base-files/etc/board.d/02_network
+++ /dev/null
@@ -1,29 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-case "$(board_name)" in
-comtrend,vr-3032u)
-	ucidef_set_bridge_device switch
-	ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
-	;;
-huawei,hg253s-v2 |\
-netgear,dgnd3700-v2 |\
-sercomm,shg2500)
-	ucidef_set_bridge_device switch
-	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
-	;;
-sercomm,h500-s-lowi |\
-sercomm,h500-s-vfes)
-	ucidef_set_bridge_device switch
-	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
-	ucidef_set_interface "qtn" device "wifi" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.252"
-	uci add_list firewall.@zone[0].network='qtn'
-	;;
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/bmips/nand/base-files/etc/board.d/03_gpio_switches b/target/linux/bmips/nand/base-files/etc/board.d/03_gpio_switches
deleted file mode 100644
index 75ac111b0c..0000000000
--- a/target/linux/bmips/nand/base-files/etc/board.d/03_gpio_switches
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-case "$(board_name)" in
-sercomm,h500-s-lowi |\
-sercomm,h500-s-vfes)
-	ucidef_add_gpio_switch "qtn_power" "Quantenna Module Power" "480" "1"
-	;;
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/bmips/nand/base-files/lib/upgrade/platform.sh b/target/linux/bmips/nand/base-files/lib/upgrade/platform.sh
deleted file mode 100644
index 33217ed975..0000000000
--- a/target/linux/bmips/nand/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,57 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-PART_NAME=firmware
-REQUIRE_IMAGE_METADATA=1
-
-platform_check_image() {
-	return 0
-}
-
-cfe_jffs2_nand_upgrade() {
-	local tar_file="$1"
-	local kernel_mtd="$(find_mtd_index $CI_KERNPART)"
-
-	if [ -z "$kernel_mtd" ]; then
-		echo "$CI_KERNPART partition not found"
-		return 1
-	fi
-
-	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
-	board_dir=${board_dir%/}
-
-	local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c 2> /dev/null)
-	local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c 2> /dev/null)
-
-	if [ "$kernel_length" = 0 ]; then
-		echo "kernel cannot be empty"
-		return 1
-	fi
-
-	flash_erase -j /dev/mtd${kernel_mtd} 0 0
-	tar xf $tar_file ${board_dir}/kernel -O | nandwrite /dev/mtd${kernel_mtd} -
-
-	local rootfs_type="$(identify_tar "$tar_file" ${board_dir}/root)"
-
-	nand_upgrade_prepare_ubi "$rootfs_length" "$rootfs_type" "0" "0"
-
-	local ubidev="$( nand_find_ubi "$CI_UBIPART" )"
-
-	local root_ubivol="$(nand_find_volume $ubidev $CI_ROOTPART)"
-	tar xf $tar_file ${board_dir}/root -O | \
-		ubiupdatevol /dev/$root_ubivol -s $rootfs_length -
-
-	nand_do_upgrade_success
-}
-
-platform_do_upgrade() {
-	case "$(board_name)" in
-		comtrend,vr-3032u|\
-		huawei,hg253s-v2|\
-		netgear,dgnd3700-v2)
-			cfe_jffs2_nand_upgrade "$1"
-			;;
-		*)
-			nand_do_upgrade "$1"
-			;;
-	esac
-}