bmips: add subtargets for each SoC

BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one
with its own specific drivers, so instead of having a huge kernel supporting
all of them, let's switch to a subtarget per SoC like other OpenWrt targets.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

9 files changed, 251 insertions, 248 deletions

diff --git a/target/linux/bmips/image/Makefile b/target/linux/bmips/image/Makefile
index da328f7216..8369a86669 100644
--- a/target/linux/bmips/image/Makefile
+++ b/target/linux/bmips/image/Makefile
@@ -7,7 +7,15 @@ KERNEL_LOADADDR := 0x80010000		# RAM start + 64K
 LOADER_ENTRY := 0x80a00000		# RAM start + 10M, for relocate
 LZMA_TEXT_START := 0x81800000		# RAM start + 24M
 
+DEVICE_VARS += CFE_BOARD_ID CFE_EXTRAS
+DEVICE_VARS += CFE_PART_FLAGS CFE_PART_ID
+DEVICE_VARS += CFE_RAM_FILE
+DEVICE_VARS += CFE_RAM_JFFS2_NAME CFE_RAM_JFFS2_PAD
+DEVICE_VARS += CFE_WFI_CHIP_ID CFE_WFI_FLASH_TYPE
+DEVICE_VARS += CFE_WFI_FLAGS CFE_WFI_VERSION
 DEVICE_VARS += CHIP_ID DEVICE_LOADADDR
+DEVICE_VARS += FLASH_MB IMAGE_OFFSET
+DEVICE_VARS += SERCOMM_FSVER SERCOMM_HWVER SERCOMM_SWVER
 
 define Build/Compile
 	rm -rf $(KDIR)/relocate
@@ -253,11 +261,74 @@ define Device/Default
   DEVICE_LOADADDR :=
 endef
 
+define Device/bcm63xx-cfe
+  FILESYSTEMS := squashfs jffs2-64k jffs2-128k
+  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
+  KERNEL_INITRAMFS_SUFFIX := .elf
+  IMAGES := cfe.bin sysupgrade.bin
+  IMAGE/cfe.bin := \
+    cfe-bin $$$$(if $$$$(FLASH_MB),--pad $$$$(shell expr $$$$(FLASH_MB) / 2))
+  IMAGE/sysupgrade.bin := cfe-bin | append-metadata
+  BLOCKSIZE := 0x10000
+  IMAGE_OFFSET :=
+  FLASH_MB :=
+  CFE_BOARD_ID :=
+  CFE_EXTRAS = --block-size $$(BLOCKSIZE) \
+    --image-offset $$(if $$(IMAGE_OFFSET),$$(IMAGE_OFFSET),$$(BLOCKSIZE))
+endef
+
+# Legacy CFEs with specific LZMA parameters and no length
+define Device/bcm63xx-cfe-legacy
+  $(Device/bcm63xx-cfe)
+  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma-cfe
+endef
+
+# CFE expects a single JFFS2 partition with cferam and kernel. However,
+# it's possible to fool CFE into properly loading both cferam and kernel
+# from two different JFFS2 partitions by adding dummy files (see
+# cfe-jffs2-cferam and cfe-jffs2-kernel).
+# Separate JFFS2 partitions allow upgrading openwrt without reflashing cferam
+# JFFS2 partition, which is much safer in case anything goes wrong.
+define Device/bcm63xx-nand
+  FILESYSTEMS := squashfs ubifs
+  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | cfe-jffs2-kernel
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
+  KERNEL_INITRAMFS_SUFFIX := .elf
+  IMAGES := cfe.bin sysupgrade.bin
+  IMAGE/cfe.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) |\
+    cfe-jffs2-cferam | append-ubi | cfe-wfi-tag
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  KERNEL_SIZE := 5120k
+  CFE_PART_FLAGS :=
+  CFE_PART_ID :=
+  CFE_RAM_FILE :=
+  CFE_RAM_JFFS2_NAME :=
+  CFE_RAM_JFFS2_PAD :=
+  CFE_WFI_VERSION :=
+  CFE_WFI_CHIP_ID = 0x$$(CHIP_ID)
+  CFE_WFI_FLASH_TYPE :=
+  CFE_WFI_FLAGS :=
+  UBINIZE_OPTS := -E 5
+  DEVICE_PACKAGES += nand-utils
+endef
+
+define Device/sercomm-nand
+  $(Device/bcm63xx-nand)
+  IMAGES := factory.img sysupgrade.bin
+  IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi |\
+    cfe-sercomm-part | gzip | cfe-sercomm-load | cfe-sercomm-crypto
+  SERCOMM_FSVER :=
+  SERCOMM_HWVER :=
+  SERCOMM_SWVER :=
+endef
+
+### Package helpers ###
 ATH9K_PACKAGES := kmod-ath9k wpad-basic-mbedtls
 B43_PACKAGES := kmod-b43 wpad-basic-mbedtls
-USB1_PACKAGES := kmod-usb-ohci kmod-ledtrig-usbdev
+USB1_PACKAGES := kmod-usb-ohci kmod-usb-ledtrig-usbport
 USB2_PACKAGES := $(USB1_PACKAGES) kmod-usb2
 
-include bcm63xx_$(SUBTARGET).mk
+include $(SUBTARGET).mk
 
 $(eval $(call BuildImage))
diff --git a/target/linux/bmips/image/bcm6318.mk b/target/linux/bmips/image/bcm6318.mk
new file mode 100644
index 0000000000..fc73eb4521
--- /dev/null
+++ b/target/linux/bmips/image/bcm6318.mk
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+define Device/comtrend_ar-5315u
+  $(Device/bcm63xx-cfe)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := AR-5315u
+  CHIP_ID := 6318
+  CFE_BOARD_ID := 96318A-1441N1
+  FLASH_MB := 16
+  DEVICE_PACKAGES += $(USB2_PACKAGES) $(B43_PACKAGES) \
+    kmod-leds-bcm6328
+endef
+TARGET_DEVICES += comtrend_ar-5315u
diff --git a/target/linux/bmips/image/bcm63268.mk b/target/linux/bmips/image/bcm63268.mk
new file mode 100644
index 0000000000..6f7cda7405
--- /dev/null
+++ b/target/linux/bmips/image/bcm63268.mk
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+define Device/comtrend_vr-3032u
+  $(Device/bcm63xx-nand)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := VR-3032u
+  CHIP_ID := 63268
+  SOC := bcm63168
+  CFE_RAM_FILE := comtrend,vr-3032u/cferam.000
+  CFE_RAM_JFFS2_NAME := cferam.000
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  VID_HDR_OFFSET := 2048
+  DEVICE_PACKAGES += $(USB2_PACKAGES) \
+    kmod-leds-bcm6328
+  CFE_WFI_FLASH_TYPE := 3
+  CFE_WFI_VERSION := 0x5732
+endef
+TARGET_DEVICES += comtrend_vr-3032u
+
+define Device/sercomm_h500-s-lowi
+  $(Device/sercomm-nand)
+  DEVICE_VENDOR := Sercomm
+  DEVICE_MODEL := H500-s
+  DEVICE_VARIANT := lowi
+  DEVICE_LOADADDR := $(KERNEL_LOADADDR)
+  KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
+  CHIP_ID := 63268
+  SOC := bcm63167
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  VID_HDR_OFFSET := 2048
+  DEVICE_PACKAGES += $(USB2_PACKAGES) \
+    kmod-leds-bcm6328
+  SERCOMM_FSVER := 1001
+  SERCOMM_HWVER := 1434b31
+  SERCOMM_SWVER := 3305
+endef
+TARGET_DEVICES += sercomm_h500-s-lowi
+
+define Device/sercomm_h500-s-vfes
+  $(Device/sercomm-nand)
+  DEVICE_VENDOR := Sercomm
+  DEVICE_MODEL := H500-s
+  DEVICE_VARIANT := vfes
+  DEVICE_LOADADDR := $(KERNEL_LOADADDR)
+  KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
+  CHIP_ID := 63268
+  SOC := bcm63167
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  VID_HDR_OFFSET := 2048
+  DEVICE_PACKAGES += $(USB2_PACKAGES) \
+    kmod-leds-bcm6328
+  SERCOMM_FSVER := 1001
+  SERCOMM_HWVER := 142584b
+  SERCOMM_SWVER := 3417
+endef
+TARGET_DEVICES += sercomm_h500-s-vfes
+
+define Device/sercomm_shg2500
+  $(Device/sercomm-nand)
+  DEVICE_VENDOR := Sercomm
+  DEVICE_MODEL := SHG2500
+  DEVICE_LOADADDR := $(KERNEL_LOADADDR)
+  KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
+  CHIP_ID := 63268
+  SOC := bcm63168
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  VID_HDR_OFFSET := 2048
+  DEVICE_PACKAGES += $(USB2_PACKAGES) kmod-i2c-gpio \
+    kmod-leds-sercomm-msp430
+  SERCOMM_FSVER := 1001
+  SERCOMM_HWVER := 1424e4a
+  SERCOMM_SWVER := 3207
+endef
+TARGET_DEVICES += sercomm_shg2500
diff --git a/target/linux/bmips/image/bcm6328.mk b/target/linux/bmips/image/bcm6328.mk
new file mode 100644
index 0000000000..3a739a7e71
--- /dev/null
+++ b/target/linux/bmips/image/bcm6328.mk
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+define Device/comtrend_ar-5387un
+  $(Device/bcm63xx-cfe)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := AR-5387un
+  CHIP_ID := 6328
+  CFE_BOARD_ID := 96328A-1441N1
+  FLASH_MB := 16
+  DEVICE_PACKAGES += $(USB2_PACKAGES) $(B43_PACKAGES) \
+    kmod-leds-bcm6328
+endef
+TARGET_DEVICES += comtrend_ar-5387un
diff --git a/target/linux/bmips/image/bcm6358.mk b/target/linux/bmips/image/bcm6358.mk
new file mode 100644
index 0000000000..33c87f9ce4
--- /dev/null
+++ b/target/linux/bmips/image/bcm6358.mk
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+define Device/huawei_hg556a-b
+  $(Device/bcm63xx-cfe-legacy)
+  DEVICE_VENDOR := Huawei
+  DEVICE_MODEL := EchoLife HG556a
+  DEVICE_VARIANT := B
+  CHIP_ID := 6358
+  CFE_BOARD_ID := HW556
+  CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8
+  BLOCKSIZE := 0x20000
+  DEVICE_PACKAGES += $(USB2_PACKAGES) $(ATH9K_PACKAGES) \
+    kmod-leds-gpio
+endef
+TARGET_DEVICES += huawei_hg556a-b
diff --git a/target/linux/bmips/image/bcm6362.mk b/target/linux/bmips/image/bcm6362.mk
new file mode 100644
index 0000000000..d6b4b1ce60
--- /dev/null
+++ b/target/linux/bmips/image/bcm6362.mk
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+define Device/huawei_hg253s-v2
+  $(Device/bcm63xx-nand)
+  IMAGES := flash.bin sysupgrade.bin
+  IMAGE/flash.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | cfe-jffs2-cferam | append-ubi
+  DEVICE_VENDOR := Huawei
+  DEVICE_MODEL := HG253s
+  DEVICE_VARIANT := v2
+  CHIP_ID := 6362
+  CFE_PART_FLAGS := 1
+  CFE_PART_ID := 0x0001EFEE
+  CFE_RAM_FILE := huawei,hg253s-v2/cferam.000
+  CFE_RAM_JFFS2_NAME := cferam.000
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  VID_HDR_OFFSET := 2048
+  DEVICE_PACKAGES += $(USB2_PACKAGES) \
+    kmod-leds-bcm6328 kmod-leds-gpio
+  CFE_WFI_FLASH_TYPE := 3
+endef
+TARGET_DEVICES += huawei_hg253s-v2
+
+define Device/netgear_dgnd3700-v2
+  $(Device/bcm63xx-nand)
+  DEVICE_VENDOR := NETGEAR
+  DEVICE_MODEL := DGND3700
+  DEVICE_VARIANT := v2
+  CHIP_ID := 6362
+  CFE_RAM_FILE := netgear,dgnd3700-v2/cferam
+  CFE_RAM_JFFS2_NAME := cferam
+  CFE_RAM_JFFS2_PAD := 496k
+  BLOCKSIZE := 16k
+  PAGESIZE := 512
+  DEVICE_PACKAGES += $(USB2_PACKAGES) \
+    kmod-leds-bcm6328 kmod-leds-gpio
+  CFE_WFI_FLASH_TYPE := 2
+  CFE_WFI_VERSION := 0x5731
+endef
+TARGET_DEVICES += netgear_dgnd3700-v2
diff --git a/target/linux/bmips/image/bcm6368.mk b/target/linux/bmips/image/bcm6368.mk
new file mode 100644
index 0000000000..be4cc576db
--- /dev/null
+++ b/target/linux/bmips/image/bcm6368.mk
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+define Device/comtrend_vr-3025u
+  $(Device/bcm63xx-cfe)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := VR-3025u
+  CHIP_ID := 6368
+  CFE_BOARD_ID := 96368M-1541N
+  BLOCKSIZE := 0x20000
+  FLASH_MB := 32
+  DEVICE_PACKAGES += $(USB2_PACKAGES) $(B43_PACKAGES) \
+    kmod-leds-gpio
+endef
+TARGET_DEVICES += comtrend_vr-3025u
diff --git a/target/linux/bmips/image/bcm63xx_generic.mk b/target/linux/bmips/image/bcm63xx_generic.mk
deleted file mode 100644
index 2c832fe8ba..0000000000
--- a/target/linux/bmips/image/bcm63xx_generic.mk
+++ /dev/null
@@ -1,78 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-DEVICE_VARS += CFE_BOARD_ID CFE_EXTRAS
-DEVICE_VARS += FLASH_MB IMAGE_OFFSET
-
-define Device/bcm63xx-cfe
-  FILESYSTEMS := squashfs jffs2-64k jffs2-128k
-  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
-  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
-  KERNEL_INITRAMFS_SUFFIX := .elf
-  IMAGES := cfe.bin sysupgrade.bin
-  IMAGE/cfe.bin := \
-    cfe-bin $$$$(if $$$$(FLASH_MB),--pad $$$$(shell expr $$$$(FLASH_MB) / 2))
-  IMAGE/sysupgrade.bin := cfe-bin | append-metadata
-  BLOCKSIZE := 0x10000
-  IMAGE_OFFSET :=
-  FLASH_MB :=
-  CFE_BOARD_ID :=
-  CFE_EXTRAS = --block-size $$(BLOCKSIZE) \
-    --image-offset $$(if $$(IMAGE_OFFSET),$$(IMAGE_OFFSET),$$(BLOCKSIZE))
-endef
-
-# Legacy CFEs with specific LZMA parameters and no length
-define Device/bcm63xx-cfe-legacy
-  $(Device/bcm63xx-cfe)
-  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma-cfe
-endef
-
-define Device/comtrend_ar-5315u
-  $(Device/bcm63xx-cfe)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := AR-5315u
-  CHIP_ID := 6318
-  CFE_BOARD_ID := 96318A-1441N1
-  FLASH_MB := 16
-  DEVICE_PACKAGES += $(USB2_PACKAGES) $(B43_PACKAGES) \
-    kmod-leds-bcm6328
-endef
-TARGET_DEVICES += comtrend_ar-5315u
-
-define Device/comtrend_ar-5387un
-  $(Device/bcm63xx-cfe)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := AR-5387un
-  CHIP_ID := 6328
-  CFE_BOARD_ID := 96328A-1441N1
-  FLASH_MB := 16
-  DEVICE_PACKAGES += $(USB2_PACKAGES) $(B43_PACKAGES) \
-    kmod-leds-bcm6328
-endef
-TARGET_DEVICES += comtrend_ar-5387un
-
-define Device/comtrend_vr-3025u
-  $(Device/bcm63xx-cfe)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := VR-3025u
-  CHIP_ID := 6368
-  CFE_BOARD_ID := 96368M-1541N
-  BLOCKSIZE := 0x20000
-  FLASH_MB := 32
-  DEVICE_PACKAGES += $(USB2_PACKAGES) $(B43_PACKAGES) \
-    kmod-leds-gpio
-endef
-TARGET_DEVICES += comtrend_vr-3025u
-
-define Device/huawei_hg556a-b
-  $(Device/bcm63xx-cfe-legacy)
-  DEVICE_VENDOR := Huawei
-  DEVICE_MODEL := EchoLife HG556a
-  DEVICE_VARIANT := B
-  CHIP_ID := 6358
-  CFE_BOARD_ID := HW556
-  CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8
-  BLOCKSIZE := 0x20000
-  DEVICE_PACKAGES += $(USB2_PACKAGES) $(ATH9K_PACKAGES) \
-    kmod-leds-gpio
-endef
-TARGET_DEVICES += huawei_hg556a-b
diff --git a/target/linux/bmips/image/bcm63xx_nand.mk b/target/linux/bmips/image/bcm63xx_nand.mk
deleted file mode 100644
index 732a5accdc..0000000000
--- a/target/linux/bmips/image/bcm63xx_nand.mk
+++ /dev/null
@@ -1,168 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-DEVICE_VARS += CFE_PART_FLAGS CFE_PART_ID
-DEVICE_VARS += CFE_RAM_FILE
-DEVICE_VARS += CFE_RAM_JFFS2_NAME CFE_RAM_JFFS2_PAD
-DEVICE_VARS += CFE_WFI_CHIP_ID CFE_WFI_FLASH_TYPE
-DEVICE_VARS += CFE_WFI_FLAGS CFE_WFI_VERSION
-DEVICE_VARS += SERCOMM_FSVER SERCOMM_HWVER SERCOMM_SWVER
-
-# CFE expects a single JFFS2 partition with cferam and kernel. However,
-# it's possible to fool CFE into properly loading both cferam and kernel
-# from two different JFFS2 partitions by adding dummy files (see
-# cfe-jffs2-cferam and cfe-jffs2-kernel).
-# Separate JFFS2 partitions allow upgrading openwrt without reflashing cferam
-# JFFS2 partition, which is much safer in case anything goes wrong.
-define Device/bcm63xx-nand
-  FILESYSTEMS := squashfs ubifs
-  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | cfe-jffs2-kernel
-  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
-  KERNEL_INITRAMFS_SUFFIX := .elf
-  IMAGES := cfe.bin sysupgrade.bin
-  IMAGE/cfe.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) |\
-    cfe-jffs2-cferam | append-ubi | cfe-wfi-tag
-  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-  KERNEL_SIZE := 5120k
-  CFE_PART_FLAGS :=
-  CFE_PART_ID :=
-  CFE_RAM_FILE :=
-  CFE_RAM_JFFS2_NAME :=
-  CFE_RAM_JFFS2_PAD :=
-  CFE_WFI_VERSION :=
-  CFE_WFI_CHIP_ID = 0x$$(CHIP_ID)
-  CFE_WFI_FLASH_TYPE :=
-  CFE_WFI_FLAGS :=
-  UBINIZE_OPTS := -E 5
-  DEVICE_PACKAGES += nand-utils
-endef
-
-define Device/sercomm-nand
-  $(Device/bcm63xx-nand)
-  IMAGES := factory.img sysupgrade.bin
-  IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi |\
-    cfe-sercomm-part | gzip | cfe-sercomm-load | cfe-sercomm-crypto
-  SERCOMM_FSVER :=
-  SERCOMM_HWVER :=
-  SERCOMM_SWVER :=
-endef
-
-define Device/comtrend_vr-3032u
-  $(Device/bcm63xx-nand)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := VR-3032u
-  CHIP_ID := 63268
-  SOC := bcm63168
-  CFE_RAM_FILE := comtrend,vr-3032u/cferam.000
-  CFE_RAM_JFFS2_NAME := cferam.000
-  BLOCKSIZE := 128k
-  PAGESIZE := 2048
-  SUBPAGESIZE := 512
-  VID_HDR_OFFSET := 2048
-  DEVICE_PACKAGES += $(USB2_PACKAGES) \
-    kmod-leds-bcm6328
-  CFE_WFI_FLASH_TYPE := 3
-  CFE_WFI_VERSION := 0x5732
-endef
-TARGET_DEVICES += comtrend_vr-3032u
-
-define Device/huawei_hg253s-v2
-  $(Device/bcm63xx-nand)
-  IMAGES := flash.bin sysupgrade.bin
-  IMAGE/flash.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | cfe-jffs2-cferam | append-ubi
-  DEVICE_VENDOR := Huawei
-  DEVICE_MODEL := HG253s
-  DEVICE_VARIANT := v2
-  CHIP_ID := 6362
-  CFE_PART_FLAGS := 1
-  CFE_PART_ID := 0x0001EFEE
-  CFE_RAM_FILE := huawei,hg253s-v2/cferam.000
-  CFE_RAM_JFFS2_NAME := cferam.000
-  BLOCKSIZE := 128k
-  PAGESIZE := 2048
-  SUBPAGESIZE := 512
-  VID_HDR_OFFSET := 2048
-  DEVICE_PACKAGES += $(USB2_PACKAGES) \
-    kmod-leds-bcm6328 kmod-leds-gpio
-  CFE_WFI_FLASH_TYPE := 3
-endef
-TARGET_DEVICES += huawei_hg253s-v2
-
-define Device/netgear_dgnd3700-v2
-  $(Device/bcm63xx-nand)
-  DEVICE_VENDOR := NETGEAR
-  DEVICE_MODEL := DGND3700
-  DEVICE_VARIANT := v2
-  CHIP_ID := 6362
-  CFE_RAM_FILE := netgear,dgnd3700-v2/cferam
-  CFE_RAM_JFFS2_NAME := cferam
-  CFE_RAM_JFFS2_PAD := 496k
-  BLOCKSIZE := 16k
-  PAGESIZE := 512
-  DEVICE_PACKAGES += $(USB2_PACKAGES) $(B43_PACKAGES) \
-    kmod-leds-bcm6328 kmod-leds-gpio
-  CFE_WFI_FLASH_TYPE := 2
-  CFE_WFI_VERSION := 0x5731
-endef
-TARGET_DEVICES += netgear_dgnd3700-v2
-
-define Device/sercomm_h500-s-lowi
-  $(Device/sercomm-nand)
-  DEVICE_VENDOR := Sercomm
-  DEVICE_MODEL := H500-s
-  DEVICE_VARIANT := lowi
-  DEVICE_LOADADDR := $(KERNEL_LOADADDR)
-  KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
-  CHIP_ID := 63268
-  SOC := bcm63167
-  BLOCKSIZE := 128k
-  PAGESIZE := 2048
-  SUBPAGESIZE := 512
-  VID_HDR_OFFSET := 2048
-  DEVICE_PACKAGES += $(USB2_PACKAGES) \
-    kmod-leds-bcm6328
-  SERCOMM_FSVER := 1001
-  SERCOMM_HWVER := 1434b31
-  SERCOMM_SWVER := 3305
-endef
-TARGET_DEVICES += sercomm_h500-s-lowi
-
-define Device/sercomm_h500-s-vfes
-  $(Device/sercomm-nand)
-  DEVICE_VENDOR := Sercomm
-  DEVICE_MODEL := H500-s
-  DEVICE_VARIANT := vfes
-  DEVICE_LOADADDR := $(KERNEL_LOADADDR)
-  KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
-  CHIP_ID := 63268
-  SOC := bcm63167
-  BLOCKSIZE := 128k
-  PAGESIZE := 2048
-  SUBPAGESIZE := 512
-  VID_HDR_OFFSET := 2048
-  DEVICE_PACKAGES += $(USB2_PACKAGES) \
-    kmod-leds-bcm6328
-  SERCOMM_FSVER := 1001
-  SERCOMM_HWVER := 142584b
-  SERCOMM_SWVER := 3417
-endef
-TARGET_DEVICES += sercomm_h500-s-vfes
-
-define Device/sercomm_shg2500
-  $(Device/sercomm-nand)
-  DEVICE_VENDOR := Sercomm
-  DEVICE_MODEL := SHG2500
-  DEVICE_LOADADDR := $(KERNEL_LOADADDR)
-  KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
-  CHIP_ID := 63268
-  SOC := bcm63168
-  BLOCKSIZE := 128k
-  PAGESIZE := 2048
-  SUBPAGESIZE := 512
-  VID_HDR_OFFSET := 2048
-  DEVICE_PACKAGES += $(USB2_PACKAGES) kmod-i2c-gpio \
-    kmod-leds-sercomm-msp430
-  SERCOMM_FSVER := 1001
-  SERCOMM_HWVER := 1424e4a
-  SERCOMM_SWVER := 3207
-endef
-TARGET_DEVICES += sercomm_shg2500