diff options
| author | Daniel González Cabanelas <dgcbueu@gmail.com> | 2023-06-10 11:54:59 +0200 |
|---|---|---|
| committer | Álvaro Fernández Rojas <noltari@gmail.com> | 2023-06-10 15:42:35 +0200 |
| commit | f25afae0b51c47a185ae30d4414ce229f27feb8e (patch) | |
| tree | f918e91c25ac20623728d6dbde2c4819ec4cff21 /target/linux/bmips/bcm6368 | |
| parent | 725319ad3857e0d6b2f5f900e9ab2f779ad53410 (diff) | |
| download | upstream-f25afae0b51c47a185ae30d4414ce229f27feb8e.tar.gz upstream-f25afae0b51c47a185ae30d4414ce229f27feb8e.tar.bz2 upstream-f25afae0b51c47a185ae30d4414ce229f27feb8e.zip | |
bmips: add support for Netgear DGND3700 v1, DGND3800B
The Netgear DGND3700 v1 and DGND3800B are the same device but with
different factory firmwares. It's an xDSL wifi router with a slim black
shiny casing and 4 PCB internal antennas connected via UFL to a miniPCI
detachable card.
Hardware:
- SoC: Broadcom BCM6368
- CPU: dual core BMIPS4350 V3.1 @400Mhz
- RAM: 128 MB DDR
- NOR Flash: 32 MB parallel (CFE and OS)
- NAND flash: 128 MB (empty)
- Ethernet LAN: 5x 1Gbit
- Wifi 2.4 GHz: Broadcom BCM43222 802.11bgn
- Wifi 5 GHz: Broadcom BCM43222 802.11abgn
- USB: 2x 2.0
- Buttons: 3x, 1 reset
- LEDs: 11x
- UART: yes
Installation via OEM web UI:
1. Open the Netgear administration web interface, by default:
http://192.168.0.1
user: admin
password: password
2. Look for "upgrade firmware" and proceed
3. Wait some minutes until it finishes
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Diffstat (limited to 'target/linux/bmips/bcm6368')
| -rw-r--r-- | target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds | 9 | ||||
| -rw-r--r-- | target/linux/bmips/bcm6368/base-files/etc/board.d/02_network | 5 |
2 files changed, 14 insertions, 0 deletions
diff --git a/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds b/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds index ab797568b7..e68a4e947b 100644 --- a/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds +++ b/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds @@ -6,6 +6,15 @@ board_config_update case "$(board_name)" in +netgear,dgnd3700-v1 |\ +netgear,dgnd3800b) + ucidef_set_led_netdev "lan" "LAN" "green:lan" "switch.1" + ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan" + ucidef_set_led_netdev "wlan0" "WIFI2G" "green:wifi2g" "phy0-ap0" + ucidef_set_led_netdev "wlan1" "WIFI5G" "blue:wifi5g" "phy1-ap0" + ucidef_set_led_usbport "usb1" "USB1" "green:usb1" "usb1-port1" "usb2-port1" + ucidef_set_led_usbport "usb2" "USB2" "green:usb2" "usb1-port2" "usb2-port2" + ;; observa,vh4032n) ucidef_set_led_usbport "usb1" "USB1" "blue:hspa" "usb1-port1" "usb2-port1" ucidef_set_led_usbport "usb2" "USB2" "red:hspa" "1-2-port1" "1-2-port2" diff --git a/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network index 1064b80fba..f99005acd7 100644 --- a/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network +++ b/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network @@ -10,6 +10,11 @@ observa,vh4032n) ucidef_set_bridge_device switch ucidef_set_interface_lan "lan1 lan2 lan3 lan4" ;; +netgear,dgnd3700-v1 |\ +netgear,dgnd3800b) + ucidef_set_bridge_device switch + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" + ;; esac board_config_flush |