diff options
| author | Daniel González Cabanelas <dgcbueu@gmail.com> | 2023-06-10 21:05:33 +0200 |
|---|---|---|
| committer | Álvaro Fernández Rojas <noltari@gmail.com> | 2023-06-11 09:58:17 +0200 |
| commit | 13579e64417545dca6bc878927d9f48f3dfe4af9 (patch) | |
| tree | 6cc8d774588e9b4e16703285da51fc65e21dd2b8 /target/linux/bmips/bcm6368 | |
| parent | df34f71be4aeb849461997f6de70124cfe778604 (diff) | |
| download | upstream-13579e64417545dca6bc878927d9f48f3dfe4af9.tar.gz upstream-13579e64417545dca6bc878927d9f48f3dfe4af9.tar.bz2 upstream-13579e64417545dca6bc878927d9f48f3dfe4af9.zip | |
bmips: add support for Netgear EVG2000
The Netgear EVG2000 is a wifi gigabit router, 2.4 GHz single band with
two internal antennas integrated in the main PCB.
Hardware:
- SoC: Broadcom BCM6369
- CPU: dual core BMIPS4350 V3.1 @400Mhz
- RAM: 64 MB DDR
- Flash: 16 MB parallel NOR
- LAN switch: Broadcom BCM53115, 5x 1Gbit
- Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn
- USB: 2x 2.0
- Buttons: 2x, 1 reset
- LEDs: 10x
- FXS: 2x
- UART: yes
Installation via CFE web UI:
1. Power off the router and make a temporal TX-RX shortcircuit on the
serial pins.
2. Power on the router and wait 3 or more seconds
3. Remove the TX-RX shortcircuit
4. Browse to http://192.168.1.1 or http://192.168.0.1 and upload the
firmware
5. Wait a few minutes for it to finish
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Diffstat (limited to 'target/linux/bmips/bcm6368')
3 files changed, 8 insertions, 1 deletions
diff --git a/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds b/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds index e68a4e947b..fb7cca17e5 100644 --- a/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds +++ b/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds @@ -15,6 +15,11 @@ netgear,dgnd3800b) ucidef_set_led_usbport "usb1" "USB1" "green:usb1" "usb1-port1" "usb2-port1" ucidef_set_led_usbport "usb2" "USB2" "green:usb2" "usb1-port2" "usb2-port2" ;; +netgear,evg2000) + ucidef_set_led_netdev "lan" "LAN" "green:lan" "switch.1" + ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan" + ucidef_set_led_usbdev "usb" "USB" "green:usb" "usb1-port1" "usb2-port1" "usb1-port2" "usb2-port2" + ;; observa,vh4032n) ucidef_set_led_usbport "usb1" "USB1" "blue:hspa" "usb1-port1" "usb2-port1" ucidef_set_led_usbport "usb2" "USB2" "red:hspa" "1-2-port1" "1-2-port2" diff --git a/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network index f99005acd7..76145024c1 100644 --- a/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network +++ b/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network @@ -11,7 +11,8 @@ observa,vh4032n) ucidef_set_interface_lan "lan1 lan2 lan3 lan4" ;; netgear,dgnd3700-v1 |\ -netgear,dgnd3800b) +netgear,dgnd3800b |\ +netgear,evg2000) ucidef_set_bridge_device switch ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" ;; diff --git a/target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc index d4ff723d14..363e492594 100644 --- a/target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc +++ b/target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc @@ -4,6 +4,7 @@ case "$(board_name)" in comtrend,vr-3025u |\ +netgear,evg2000 |\ observa,vh4032n) mtd fixtrx firmware ;; |