aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bmips/bcm6368/base-files
diff options
context:
space:
mode:
authorÁlvaro Fernández Rojas <noltari@gmail.com>2023-06-11 12:30:57 +0200
committerÁlvaro Fernández Rojas <noltari@gmail.com>2023-06-11 18:33:33 +0200
commitcfdcf4b4d91006ae2202f9846df3a8d23fe098a2 (patch)
treed0b972f82bf4cec656adf02ba0e3f5b196025b10 /target/linux/bmips/bcm6368/base-files
parent8b20b8fe2ab2b67463c9a725627ac6951da6750c (diff)
downloadupstream-cfdcf4b4d91006ae2202f9846df3a8d23fe098a2.tar.gz
upstream-cfdcf4b4d91006ae2202f9846df3a8d23fe098a2.tar.bz2
upstream-cfdcf4b4d91006ae2202f9846df3a8d23fe098a2.zip
bmips: add support for Comtrend WAP-5813n
The Comtrend WAP-5813n is a wifi gigabit router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6369 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 64 MB DDR - Flash: 8 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - Wifi 2.4 GHz: miniPCI Broadcom BCM4322 802.11bgn - USB: 1x 2.0 (optional) - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit c3b1ef2dfd)
Diffstat (limited to 'target/linux/bmips/bcm6368/base-files')
-rw-r--r--target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds3
-rw-r--r--target/linux/bmips/bcm6368/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc1
3 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds b/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds
index fb7cca17e5..c7e61fe72f 100644
--- a/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds
+++ b/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds
@@ -6,6 +6,9 @@
board_config_update
case "$(board_name)" in
+comtrend,wap-5813n)
+ ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
+ ;;
netgear,dgnd3700-v1 |\
netgear,dgnd3800b)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "switch.1"
diff --git a/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network
index 1b47e5a76f..58fba05fec 100644
--- a/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network
+++ b/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network
@@ -14,6 +14,7 @@ comtrend,vr-3025un)
ucidef_set_bridge_device switch
ucidef_set_interface_lan "lan1 lan2 lan3 iptv"
;;
+comtrend,wap-5813n |\
netgear,dgnd3700-v1 |\
netgear,dgnd3800b |\
netgear,evg2000)
diff --git a/target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc
index 7299317947..63d10c9a8e 100644
--- a/target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc
+++ b/target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc
@@ -5,6 +5,7 @@
case "$(board_name)" in
comtrend,vr-3025u |\
comtrend,vr-3025un |\
+comtrend,wap-5813n |\
netgear,evg2000 |\
observa,vh4032n)
mtd fixtrx firmware