diff options
| author | Álvaro Fernández Rojas <noltari@gmail.com> | 2023-06-15 18:16:21 +0200 |
|---|---|---|
| committer | Álvaro Fernández Rojas <noltari@gmail.com> | 2023-06-16 09:50:34 +0200 |
| commit | 66e1bef8f73b5857e7791d04643e2e580741dd9f (patch) | |
| tree | c36a1e9ce29132e3b0284f51b2e949f5fc9e77c4 /target/linux/bmips/bcm63268/base-files/etc/board.d/02_network | |
| parent | b073d6cf7a7116d92f3de4bb59124e3ed0466420 (diff) | |
| download | upstream-66e1bef8f73b5857e7791d04643e2e580741dd9f.tar.gz upstream-66e1bef8f73b5857e7791d04643e2e580741dd9f.tar.bz2 upstream-66e1bef8f73b5857e7791d04643e2e580741dd9f.zip | |
bmips: add support for Comtrend VG-8050
The Comtrend VG-8050 is a wifi gigabit ethernet router, 2.4 GHz single band with
two external antennas.
Hardware:
- SoC: Broadcom BCM63169
- CPU: dual core BMIPS4350 @ 400Mhz
- RAM: 128 MB DDR
- Flash: 128 MB NAND
- LAN switch: Broadcom BCM53125, 5x 1Gbit
- Wifi 2.4 GHz: SoC (BCM63268) 802.11bgn
- USB: 1x 2.0 (optional)
- Buttons: 2x (reset)
- LEDs: yes
- UART: yes
Installation via CFE web UI:
1. Power off the router.
2. Press reset button near the power switch.
3. Keep it pressed while powering up during ~20+ seconds.
4. Browse to http://192.168.1.1 and upload the firmware.
5. Wait a few minutes for it to finish.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 47cc09aa7a9a12cb7b18ef96f0b5d0bcb5d84b9e)
Diffstat (limited to 'target/linux/bmips/bcm63268/base-files/etc/board.d/02_network')
| -rw-r--r-- | target/linux/bmips/bcm63268/base-files/etc/board.d/02_network | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/bmips/bcm63268/base-files/etc/board.d/02_network b/target/linux/bmips/bcm63268/base-files/etc/board.d/02_network index ad7f2432e2..7fb9333cc1 100644 --- a/target/linux/bmips/bcm63268/base-files/etc/board.d/02_network +++ b/target/linux/bmips/bcm63268/base-files/etc/board.d/02_network @@ -16,6 +16,7 @@ sercomm,h500-s-vfes) ucidef_set_interface "qtn" device "wifi" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.252" uci add_list firewall.@zone[0].network='qtn' ;; +comtrend,vg-8050 |\ sercomm,shg2500) ucidef_set_bridge_device switch ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" |