brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 95 insertions, 0 deletions

diff --git a/target/linux/bcm63xx/patches-4.19/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch b/target/linux/bcm63xx/patches-4.19/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
new file mode 100644
index 0000000000..d0e37efd53
--- /dev/null
+++ b/target/linux/bcm63xx/patches-4.19/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
@@ -0,0 +1,95 @@
+From 9912a8b3c240a9b0af01ff496b7e8ed9e4cc5b82 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 21:43:49 +0200
+Subject: [PATCH 02/10] MIPS: BCM63XX: use platform data for the sprom
+
+Similar to ethernet setup, use a platform data struct for passing
+the mac. This eliminates the requirement to allocate an array on
+stack for the mac passed.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_common.c                     | 6 ++----
+ arch/mips/bcm63xx/sprom.c                                   | 8 ++++----
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 8 +++++++-
+ arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h         | 4 ++++
+ 4 files changed, 17 insertions(+), 9 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -141,7 +141,6 @@ static struct platform_device bcm63xx_gp
+ int __init board_register_devices(void)
+ {
+ 	int usbh_ports = 0;
+-	u8 mac[ETH_ALEN];
+ 
+ 	if (board.has_uart0)
+ 		bcm63xx_uart_register(0);
+@@ -184,8 +183,8 @@ int __init board_register_devices(void)
+ 	 * do this after registering enet devices
+ 	 */
+ 
+-	if (board_get_mac_address(mac) ||
+-	    bcm63xx_register_fallback_sprom(mac))
++	if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
++	    bcm63xx_register_fallback_sprom(&board.fallback_sprom))
+ 		pr_err(PFX "failed to register fallback SPROM\n");
+ 
+ 	bcm63xx_spi_register();
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -55,14 +55,14 @@ int bcm63xx_get_fallback_sprom(struct ss
+ }
+ #endif
+ 
+-int __init bcm63xx_register_fallback_sprom(u8 *mac)
++int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
+ {
+ 	int ret = 0;
+ 
+ #ifdef CONFIG_SSB_PCIHOST
+-	memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
+-	memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
+-	memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
++	memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
++	memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
++	memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
+ 
+ 	ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
+ #endif
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -1,6 +1,12 @@
+ #ifndef __BCM63XX_FALLBACK_SPROM
+ #define __BCM63XX_FALLBACK_SPROM
+ 
+-int bcm63xx_register_fallback_sprom(u8 *mac);
++#include <linux/if_ether.h>
++
++struct fallback_sprom_data {
++	u8 mac_addr[ETH_ALEN];
++};
++
++int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
+ 
+ #endif
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -7,6 +7,7 @@
+ #include <linux/leds.h>
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_usb_usbd.h>
++#include <bcm63xx_fallback_sprom.h>
+ 
+ /*
+  * flash mapping
+@@ -50,6 +51,9 @@ struct board_info {
+ 
+ 	/* External PHY reset GPIO flags from gpio.h */
+ 	unsigned long ephy_reset_gpio_flags;
++
++	/* fallback sprom config */
++	struct fallback_sprom_data fallback_sprom;
+ };
+ 
+ #endif /* ! BOARD_BCM963XX_H_ */