brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 203 insertions, 0 deletions

diff --git a/target/linux/bcm63xx/dts/bcm6358.dtsi b/target/linux/bcm63xx/dts/bcm6358.dtsi
new file mode 100644
index 0000000000..a78cdef373
--- /dev/null
+++ b/target/linux/bcm63xx/dts/bcm6358.dtsi
@@ -0,0 +1,203 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6358";
+
+	aliases {
+		pflash = &pflash;
+		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &lsspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	memory { device_type = "memory"; reg = <0 0>; };
+
+	pflash: nor@1e000000 {
+		compatible = "cfi-flash";
+		reg = <0x1e000000 0x2000000>;
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		status = "disabled";
+	};
+
+	ubus@fff00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&periph_intc>;
+
+		periph_intc: interrupt-controller@fffe000c {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0xfffe000c 0x8>,
+			      <0xfffe0038 0x8>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		ext_intc0: interrupt-controller@fffe0014 {
+			compatible = "brcm,bcm6345-ext-intc";
+			reg = <0xfffe0014 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupts = <25>, <26>, <27>, <28>;
+		};
+
+		ext_intc1: interrupt-controller@fffe001c {
+			compatible = "brcm,bcm6345-ext-intc";
+			reg = <0xfffe001c 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupts = <20>, <21>;
+		};
+
+		pinctrl: pin-controller@fffe0080 {
+			compatible = "brcm,bcm6358-pinctrl";
+			reg = <0xfffe0080 0x8>,
+			      <0xfffe0088 0x8>;
+			reg-names = "dirout", "dat", "mode";
+			brcm,gpiomode = <&gpiomode>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupts-extended = <&ext_intc1 0 0>,
+					      <&ext_intc1 1 0>,
+					      <&ext_intc0 0 0>,
+					      <&ext_intc0 1 0>,
+					      <&ext_intc0 2 0>,
+					      <&ext_intc0 3 0>;
+			interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35",
+					  "gpio36", "gpio37";
+
+			pinctrl_ebi_cs: ebi_cs {
+				function = "ebi_cs";
+				groups = "ebi_cs_grp";
+			};
+
+			pinctrl_uart1: uart1 {
+				function = "uart1";
+				groups = "uart1_grp";
+			};
+
+			pinctrl_serial_led: serial_led {
+				function = "serial_led";
+				groups = "serial_led_grp";
+			};
+
+			pinctrl_legacy_led: legacy_led {
+				function = "legacy_led";
+				groups = "legacy_led_grp";
+			};
+
+			pinctrl_led: led {
+				function = "led";
+				groups = "led_grp";
+			};
+
+			pinctrl_spi_cs_23: spi_cs {
+				function = "spi_cs";
+				groups = "spi_cs_grp";
+			};
+
+			pinctrl_utopia: utopia {
+				function = "utopia";
+				groups = "utopia_grp";
+			};
+
+			pinctrl_pwm_syn_clk: pwm_syn_clk {
+				function = "pwm_syn_clk";
+				groups = "pwm_syn_clk_grp";
+			};
+
+			pinctrl_sys_irq: sys_irq {
+				function = "sys_irq";
+				groups = "sys_irq_grp";
+			};
+		};
+
+		gpiomode: gpiomode@fffe0098 {
+			compatible = "brcm,bcm6358-gpiomode", "syscon";
+			reg = <0xfffe0098 0x4>;
+		};
+
+		leds: led-controller@fffe00d0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-leds";
+			reg = <0xfffe00d0 0x8>;
+			status = "disabled";
+		};
+
+		uart0: serial@fffe0100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
+		uart1: serial@fffe0120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
+		lsspi: spi@fffe0800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-spi";
+			reg = <0xfffe0800 0x70c>;
+			interrupts = <1>;
+			/* clocks = <&clkctl 9>; */
+		};
+	};
+};