bcm63xx: add a few DTSI files to share definitions

After the LED labels have been made more general by removing
the model names, we can move several definitions to DTSI files
to reduce the amount of duplicate code.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 27 insertions, 135 deletions

diff --git a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts
index 47b0618e6c..3e4f90832f 100644
--- a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts
+++ b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts
@@ -1,153 +1,45 @@
 /dts-v1/;
 
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
+#include "bcm6358-huawei-echolife-hg556a.dtsi"
 
 / {
 	model = "Huawei EchoLife HG556a (version A)";
 	compatible = "huawei,echolife-hg556a-a", "brcm,bcm6358";
+};
 
-	aliases {
-		led-boot = &led_power_red;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_red;
-		led-upgrade = &led_power_red;
+&gpiokeys {
+	help {
+		label = "help";
+		gpios = <&pinctrl 8 1>;
+		linux,code = <KEY_HELP>;
+		debounce-interval = <60>;
 	};
+};
 
-	chosen {
-		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-		stdout-path = "serial0:115200n8";
+&gpioleds {
+	message_red {
+		label = "red:message";
+		gpios = <&pinctrl 0 1>;
 	};
 
-	keys {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		help {
-			label = "help";
-			gpios = <&pinctrl 8 1>;
-			linux,code = <KEY_HELP>;
-			debounce-interval = <60>;
-		};
-
-		wlan {
-			label = "wlan";
-			gpios = <&pinctrl 9 1>;
-			linux,code = <KEY_WLAN>;
-			debounce-interval = <60>;
-		};
-
-		restart {
-			label = "restart";
-			gpios = <&pinctrl 10 1>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&pinctrl 11 1>;
-			linux,code = <KEY_CONFIG>;
-			debounce-interval = <60>;
-		};
+	hspa_red {
+		label = "red:hspa";
+		gpios = <&pinctrl 1 1>;
 	};
 
-	leds {
-		compatible = "gpio-leds";
-
-		message_red {
-			label = "red:message";
-			gpios = <&pinctrl 0 1>;
-		};
-		hspa_red {
-			label = "red:hspa";
-			gpios = <&pinctrl 1 1>;
-		};
-		dsl_red {
-			label = "red:dsl";
-			gpios = <&pinctrl 2 1>;
-		};
-		led_power_red: power_red {
-			label = "red:power";
-			gpios = <&pinctrl 3 1>;
-			default-state = "on";
-		};
-		all_red {
-			label = "red:all";
-			gpios = <&pinctrl 6 1>;
-			default-state = "on";
-		};
-		lan1_green {
-			label = "green:lan1";
-			gpios = <&pinctrl 12 1>;
-		};
-		lan1_red {
-			label = "red:lan1";
-			gpios = <&pinctrl 13 1>;
-		};
-		lan2_green {
-			label = "green:lan2";
-			gpios = <&pinctrl 15 1>;
-		};
-		lan2_red {
-			label = "red:lan2";
-			gpios = <&pinctrl 22 1>;
-		};
-		lan3_green {
-			label = "green:lan3";
-			gpios = <&pinctrl 23 1>;
-		};
-		lan3_red {
-			label = "red:lan3";
-			gpios = <&pinctrl 26 1>;
-		};
-		lan4_green {
-			label = "green:lan4";
-			gpios = <&pinctrl 27 1>;
-		};
-		lan4_red {
-			label = "red:lan4";
-			gpios = <&pinctrl 28 1>;
-		};
+	all_red {
+		label = "red:all";
+		gpios = <&pinctrl 6 1>;
+		default-state = "on";
 	};
-};
-
-&pflash {
-	status = "okay";
-
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		cfe@0 {
-			label = "CFE";
-			reg = <0x000000 0x020000>;
-			read-only;
-		};
 
-		linux@20000 {
-			label = "linux";
-			reg = <0x020000 0xec0000>;
-			compatible = "brcm,bcm963xx-imagetag";
-		};
-
-		cal_data@ee0000 {
-			label = "cal_data";
-			reg = <0xee0000 0x100000>;
-			read-only;
-		};
-
-		nvram@fe0000 {
-			label = "nvram";
-			reg = <0xfe0000 0x020000>;
-		};
+	lan1_green {
+		label = "green:lan1";
+		gpios = <&pinctrl 12 1>;
 	};
-};
 
-&uart0 {
-	status = "okay";
+	lan2_green {
+		label = "green:lan2";
+		gpios = <&pinctrl 15 1>;
+	};
 };