brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 153 insertions, 0 deletions

diff --git a/target/linux/bcm63xx/dts/bcm6348.dtsi b/target/linux/bcm63xx/dts/bcm6348.dtsi
new file mode 100644
index 0000000000..f3e17be533
--- /dev/null
+++ b/target/linux/bcm63xx/dts/bcm6348.dtsi
@@ -0,0 +1,153 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6348";
+
+	aliases {
+		pflash = &pflash;
+		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		spi0 = &lsspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "brcm,bmips3300", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	memory { device_type = "memory"; reg = <0 0>; };
+
+	pflash: nor@1fc00000 {
+		compatible = "cfi-flash";
+		reg = <0x1fc00000 0x400000>;
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		status = "disabled";
+	};
+
+	ubus@fff00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&periph_intc>;
+
+		periph_intc: interrupt-controller@fffe000c {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0xfffe000c 0x8>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>;
+		};
+
+		ext_intc: interrupt-controller@fffe0014 {
+			compatible = "brcm,bcm6345-ext-intc";
+			reg = <0xfffe0014 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <3>, <4>, <5>, <6>;
+
+			brcm,field-width = <5>;
+		};
+
+		pinctrl: pin-controller@fffe0400 {
+			compatible = "brcm,bcm6348-pinctrl";
+			reg = <0xfffe0400 0x8>,
+			      <0xfffe0408 0x8>,
+			      <0xfffe0418 0x4>;
+			reg-names = "dirout", "dat", "mode";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-parent = <&ext_intc>;
+			interrupts = <0 0>, <1 0>, <2 0>, <3 0>;
+			interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35";
+
+			pinctrl_ext_ephy: ext_ephy {
+				function = "ext_ephy";
+				groups = "group1", "group4";
+			};
+
+			pinctrl_mii_snoop: mii_snoop {
+				function = "ext_ephy";
+				groups = "group1", "group4";
+			};
+
+			pinctrl_legacy_led: legacy_led {
+				function = "legacy_led";
+				groups = "group4";
+			};
+
+			pinctrl_mii_pccard: mii_pccard {
+				function = "mii_pccard";
+				groups = "group1";
+			};
+
+			pinctrl_pci: pci {
+				function = "pci";
+				groups = "group2";
+			};
+
+			pinctrl_spi_master_uart: spi_master_uart {
+				function = "spi_master_uart";
+				groups = "group1";
+			};
+
+			pinctrl_ext_mii: ext_mii {
+				function = "ext_mii";
+				groups = "group0", "group3";
+			};
+
+			pinctrl_utopia: utopia {
+				function = "utopia";
+				groups = "group0", "group1", "group3";
+			};
+		};
+
+		uart0: serial@fffe0300 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0300 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
+		lsspi: spi@fffe0c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6348-spi";
+			reg = <0xfffe0c00 0x40>;
+			interrupts = <1>;
+			/* clocks = <&clkctl 9>; */
+
+		};
+	};
+};