brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 87 insertions, 0 deletions

diff --git a/target/linux/bcm63xx/dts/bcm6348-d-link-dsl-2640b-b.dts b/target/linux/bcm63xx/dts/bcm6348-d-link-dsl-2640b-b.dts
new file mode 100644
index 0000000000..4213822a3e
--- /dev/null
+++ b/target/linux/bcm63xx/dts/bcm6348-d-link-dsl-2640b-b.dts
@@ -0,0 +1,87 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DSL-2640B rev B2";
+	compatible = "d-link,dsl-2640b-b", "brcm,bcm6348";
+
+	chosen {
+		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 7 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_green {
+			label = "D-4P-W:green:power";
+			gpios = <&pinctrl 0 1>;
+			default-state = "on";
+		};
+		status {
+			label = "D-4P-W::status";
+			gpios = <&pinctrl 3 1>;
+		};
+		inet_green {
+			label = "D-4P-W:green:internet";
+			gpios = <&pinctrl 4 1>;
+		};
+		inet_red {
+			label = "D-4P-W:red:internet";
+			gpios = <&pinctrl 5 1>;
+		};
+	};
+};
+
+&pflash {
+	status = "ok";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cfe@0 {
+			label = "CFE";
+			reg = <0x000000 0x010000>;
+			read-only;
+		};
+
+		linux@10000 {
+			label = "linux";
+			reg = <0x010000 0x3e0000>;
+			compatible = "brcm,bcm963xx-imagetag";
+		};
+
+		nvram@3f0000 {
+			label = "nvram";
+			reg = <0x3f0000 0x010000>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
+};
+
+&uart0 {
+	status = "ok";
+};