brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

6 files changed, 486 insertions, 0 deletions

diff --git a/target/linux/bcm63xx/base-files/etc/board.d/01_leds b/target/linux/bcm63xx/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..dd1c565bb9
--- /dev/null
+++ b/target/linux/bcm63xx/base-files/etc/board.d/01_leds
@@ -0,0 +1,89 @@
+#!/bin/sh
+#
+# Copyright (C) 2013-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+actiontec,r1000h)
+	ucidef_set_led_usbport "usb" "USB" "R1000H:green:usb" "usb1-port1" "usb2-port1"
+	;;
+adb,a4001n)
+	ucidef_set_led_usbdev "usb" "USB" "A4001N:green:usb" "1-1"
+	;;
+adb,a4001n1)
+	ucidef_set_led_netdev "lan" "LAN" "A4001N1:green:eth" "eth0"
+	ucidef_set_led_usbdev "usb" "USB" "A4001N1:green:3g" "1-1"
+	;;
+adb,av4202n)
+	ucidef_set_led_netdev "wlan0" "WLAN" "AV4202N:blue:wifi" "wlan0"
+	;;
+bt,home-hub-2-a)
+	ucidef_set_led_netdev "lan" "LAN" "HOMEHUB2A:blue:broadband" "eth0.1"
+	ucidef_set_led_netdev "wlan0" "WIFI" "HOMEHUB2A:green:wireless" "wlan0"
+	ucidef_set_led_usbdev "usb1" "USB1" "HOMEHUB2A:blue:phone" "1-1"
+	ucidef_set_led_usbdev "usb2" "USB2" "HOMEHUB2A:green:phone" "2-1"
+	;;
+comtrend,ar-5315u)
+	ucidef_set_led_usbdev "usb" "USB" "AR-5315u:green:usb" "1-1"
+	;;
+huawei,echolife-hg553)
+	ucidef_set_led_netdev "lan" "LAN" "HW553:blue:lan" "eth0"
+	ucidef_set_led_usbdev "usb1" "USB1" "HW553:red:hspa" "1-1"
+	ucidef_set_led_usbdev "usb2" "USB2" "HW553:blue:hspa" "1-2"
+	;;
+huawei,echolife-hg556a-a|\
+huawei,echolife-hg556a-b|\
+huawei,echolife-hg556a-c)
+	ucidef_set_led_netdev "lan" "LAN" "HW556:red:dsl" "eth0"
+	ucidef_set_led_usbdev "usb" "USB" "HW556:red:hspa" "1-2"
+	;;
+huawei,echolife-hg622)
+	ucidef_set_led_usbdev "usb" "USB" "HG622:green:usb" "1-2"
+	;;
+huawei,echolife-hg655b)
+	ucidef_set_led_usbdev "usb" "USB" "HW65x:green:usb" "1-2"
+	;;
+inventel,livebox-1)
+	ucidef_set_led_netdev "lan" "LAN" "Livebox1:red:traffic" "eth0"
+	ucidef_set_led_netdev "wan" "WAN" "Livebox1:red:adsl" "eth1"
+	ucidef_set_led_netdev "wlan0" "WIFI" "Livebox1:red:wifi" "wlan0"
+	;;
+netgear,dgnd3700-v1)
+	ucidef_set_led_netdev "lan" "LAN" "DGND3700v1_3800B:green:lan" "eth0.1"
+	ucidef_set_led_netdev "wan" "WAN" "DGND3700v1_3800B:green:inet" "eth0.2"
+	ucidef_set_led_netdev "wlan0" "WIFI2G" "DGND3700v1_3800B:green:wifi2g" "wlan0"
+	ucidef_set_led_netdev "wlan1" "WIFI5G" "DGND3700v1_3800B:blue:wifi5g" "wlan1"
+	ucidef_set_led_usbdev "usb1" "USB1" "DGND3700v1_3800B:green:usb-back" "1-1"
+	ucidef_set_led_usbdev "usb2" "USB2" "DGND3700v1_3800B:green:usb-front" "1-2"
+	;;
+netgear,evg2000)
+	ucidef_set_led_netdev "lan" "LAN" "EVG2000:green:lan" "eth0"
+	ucidef_set_led_netdev "wan" "WAN" "EVG2000:green:wan" "eth1"
+	ucidef_set_led_netdev "wlan0" "WIFI" "EVG2000:green:wireless" "wlan0"
+	ucidef_set_led_usbdev "usb1" "USB1" "EVG2000:green:voip1" "1-1"
+	ucidef_set_led_usbdev "usb2" "USB2" "EVG2000:green:voip2" "1-2"
+	;;
+nucom,r5010un-v2)
+	ucidef_set_led_usbdev "usb" "USB" "R5010UNv2:green:usb" "1-1"
+	;;
+sagem,fast-2704n)
+	ucidef_set_led_netdev "wan" "WAN" "F@ST2704N:green:inet" "eth0.2"
+	;;
+sagem,fast-2704-v2)
+	ucidef_set_led_usbdev "usb" "USB" "F@ST2704V2:green:usb" "1-1"
+	;;
+sercomm,ad1018-nor)
+	ucidef_set_led_netdev "wlan0" "WLAN" "AD1018:green:wifi" "wlan0"
+	;;
+telsey,cpva502plus)
+	ucidef_set_led_netdev "lan" "LAN" "CPVA502+:amber:link" "eth0"
+	;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/bcm63xx/base-files/etc/board.d/02_network b/target/linux/bcm63xx/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..7fa1514b4f
--- /dev/null
+++ b/target/linux/bcm63xx/base-files/etc/board.d/02_network
@@ -0,0 +1,146 @@
+#!/bin/sh
+#
+# Copyright (C) 2012-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+actiontec,r1000h|\
+dynalink,rta770bw|\
+dynalink,rta770w|\
+netgear,cvg834g|\
+netgear,evg2000|\
+t-com,speedport-w-303v|\
+t-com,speedport-w-500v)
+	ucidef_set_interface_lan "eth0"
+	;;
+adb,a4001n1|\
+adb,a4001n|\
+adb,av4202n|\
+brcm,bcm963281tan|\
+brcm,bcm96328avng|\
+brcm,bcm96368mvngr|\
+comtrend,ar-5381u|\
+comtrend,ar-5387un|\
+comtrend,vr-3025u|\
+comtrend,vr-3025un|\
+comtrend,vr-3026e|\
+d-link,dsl-274xb-f1|\
+d-link,dsl-275xb-d1|\
+huawei,echolife-hg622|\
+huawei,echolife-hg655b|\
+nucom,r5010un-v2|\
+sagem,fast-2504n|\
+sagem,fast-2704-v2|\
+zyxel,p870hw-51a-v2)
+	ucidef_add_switch "switch0" \
+		"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "8t@eth0"
+	;;
+alcatel,rg100a|\
+belkin,f5d7633|\
+brcm,bcm96348gw|\
+brcm,bcm96348gw-10|\
+brcm,bcm96348gw-11|\
+brcm,bcm96358vw|\
+brcm,bcm96358vw2|\
+bt,voyager-2500v-bb|\
+davolink,dv-201amr|\
+d-link,dsl-2650u|\
+dynalink,rta1025w|\
+netgear,dg834gt-pn|\
+pirelli,agpf-s0|\
+sagem,fast-2404|\
+telsey,magic|\
+tp-link,td-w8900gb|\
+usrobotics,usr9108)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	ucidef_add_switch "switch0" \
+		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth1"
+	;;
+asmax,ar-1004g|\
+brcm,bcm96338gw|\
+brcm,bcm96338w|\
+bt,voyager-2110|\
+comtrend,ct-5365|\
+comtrend,ct-536plus|\
+comtrend,ct-6373|\
+d-link,dsl-2640b-b|\
+d-link,dsl-2640u|\
+dynalink,rta1320|\
+netgear,dg834g-v4|\
+sagem,fast-2604|\
+telsey,cpva642)
+	ucidef_add_switch "switch0" \
+		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
+	;;
+brcm,bcm963268bu-p300)
+	ucidef_add_switch "switch0" \
+		"0:lan" "3:lan" "4:lan" "5:lan" "6:lan" "7:lan" "8t@eth0"
+	;;
+brcm,bcm96368mvwg)
+	ucidef_add_switch "switch0" \
+		"1:lan" "2:lan" "4:lan" "5:lan" "8t@eth0"
+	;;
+bt,home-hub-2-a|\
+d-link,dsl-274xb-c2|\
+huawei,echolife-hg553|\
+huawei,echolife-hg556a-a|\
+huawei,echolife-hg556a-b|\
+huawei,echolife-hg556a-c)
+	ucidef_add_switch "switch0" \
+		"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "5t@eth0"
+	;;
+comtrend,ar-5315u|\
+observa,vh4032n|\
+sagem,fast-2704n)
+	ucidef_add_switch "switch0" \
+		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "8t@eth0"
+	;;
+comtrend,wap-5813n)
+	ucidef_add_switch "switch0" \
+		"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@eth0"
+	;;
+d-link,dva-g3810bn-tl|\
+huawei,echolife-hg520v|\
+sfr,neufbox-4-foxconn-r1|\
+sfr,neufbox-4-sercomm-r0)
+	ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
+	ucidef_add_switch "switch0" \
+		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth1"
+	;;
+inteno,vg50)
+	ucidef_add_switch "switch0" \
+		"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8t@eth0"
+	;;
+inventel,livebox-1|\
+telsey,cpva502plus)
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	;;
+netgear,dgnd3700-v1)
+	ucidef_add_switch "switch0" \
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "8t@eth0"
+	;;
+sercomm,ad1018-nor)
+	ucidef_add_switch "switch0" \
+		"1:lan:3" "2:lan:2" "3:lan:1" "0:wan" "8t@eth0"
+	;;
+sfr,neufbox-6-sercomm-r0)
+	ucidef_add_switch "switch0" \
+		"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9t@eth0"
+	;;
+sky,sr102)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "switch0" \
+		"0:lan" "1:lan" "2:lan" "3:wan" "8t@eth0"
+	;;
+*)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/bcm63xx/base-files/etc/diag.sh b/target/linux/bcm63xx/base-files/etc/diag.sh
new file mode 100644
index 0000000000..4b6d8d6065
--- /dev/null
+++ b/target/linux/bcm63xx/base-files/etc/diag.sh
@@ -0,0 +1,167 @@
+#!/bin/sh
+# Copyright (C) 2007-2013 OpenWrt.org
+
+. /lib/functions.sh
+. /lib/functions/leds.sh
+
+set_state() {
+	case "$(board_name)" in
+	actiontec,r1000h)
+		status_led="R1000H:green:power"
+		;;
+	adb,a4001n)
+		status_led="A4001N:green:power"
+		;;
+	adb,a4001n1)
+		status_led="A4001N1:green:power"
+		;;
+	adb,av4202n)
+		status_led="AV4202N:white:power"
+		;;
+	asmax,ar-1004g)
+		status_led="AR1004G:green:power"
+		;;
+	brcm,bcm963281tan)
+		status_led="963281TAN::power"
+		;;
+	brcm,bcm96328avng)
+		status_led="96328avng::power"
+		;;
+	brcm,bcm96348gw)
+		status_led="96348GW:green:power"
+		;;
+	brcm,bcm96348gw-11)
+		status_led="96348GW-11:green:power"
+		;;
+	bt,home-hub-2-a)
+		status_led="HOMEHUB2A:green:upgrading"
+		status_led2="HOMEHUB2A:blue:upgrading"
+		;;
+	bt,voyager-2110)
+		status_led="V2110:power:green"
+		;;
+	comtrend,ar-5315u)
+		status_led="AR-5315u:green:power"
+		;;
+	comtrend,ar-5381u)
+		status_led="AR-5381u:green:power"
+		;;
+	comtrend,ar-5387un)
+		status_led="AR-5387un:green:power"
+		;;
+	comtrend,ct-536plus)
+		status_led="CT536_CT5621:green:power"
+		;;
+	comtrend,vr-3025u)
+		status_led="VR-3025u:green:power"
+		;;
+	comtrend,vr-3025un)
+		status_led="VR-3025un:green:power"
+		;;
+	comtrend,vr-3026e)
+		status_led="VR-3026e:green:power"
+		;;
+	comtrend,wap-5813n)
+		status_led="WAP-5813n:green:power"
+		;;
+	d-link,dsl-2640b-b)
+		status_led="D-4P-W:green:power"
+		;;
+	d-link,dsl-274xb-c2|\
+	d-link,dsl-274xb-f1)
+		status_led="dsl-274xb:green:power"
+		;;
+	d-link,dsl-275xb-d1)
+		status_led="dsl-275xb:green:power"
+		;;
+	dynalink,rta770bw)
+		status_led="RTA770BW:green:diag"
+		;;
+	dynalink,rta770w)
+		status_led="RTA770W:green:diag"
+		;;
+	huawei,echolife-hg520v)
+		status_led="HW520:green:net"
+		;;
+	huawei,echolife-hg553)
+		status_led="HW553:blue:power"
+		;;
+	huawei,echolife-hg556a-a|\
+	huawei,echolife-hg556a-b|\
+	huawei,echolife-hg556a-c)
+		status_led="HW556:red:power"
+		;;
+	huawei,echolife-hg655b)
+		status_led="HW65x:green:power"
+		;;
+	inventel,livebox-1)
+		status_led="Livebox1:red:adsl-fail-power"
+		;;
+	netgear,cvg834g)
+		status_led="CVG834G:green:power"
+		;;
+	netgear,dgnd3700-v1)
+		status_led="DGND3700v1_3800B:green:power"
+		;;
+	netgear,evg2000)
+		status_led="EVG2000:green:power"
+		;;
+	nucom,r5010un-v2)
+		status_led="R5010UNv2:green:power"
+		;;
+	observa,vh4032n)
+		status_led="VH4032N:blue:power"
+		;;
+	sagem,fast-2504n)
+		status_led="fast2504n:green:ok"
+		;;
+	sagem,fast-2704n)
+		status_led2="F@ST2704N:red:power"
+		;;
+	sagem,fast-2704-v2)
+		status_led="F@ST2704V2:green:power"
+		;;
+	sercomm,ad1018-nor)
+		status_led="AD1018:green:power"
+		;;
+	sky,sr102)
+		status_led="SR102:white:power"
+		status_led2="SR102:red:power"
+		;;
+	t-com,speedport-w-303v)
+		status_led="spw303v:green:power+adsl"
+		;;
+	t-com,speedport-w-500v)
+		status_led="SPW500V:green:power"
+		;;
+	tecom,gw6200)
+		status_led="GW6200:green:line1"
+		status_led2="GW6200:green:tel"
+		;;
+	telsey,cpva642)
+		status_led="CPVA642:green:power:"
+		;;
+	zyxel,p870hw-51a-v2)
+		status_led="P870HW-51a:green:power"
+		;;
+	esac
+
+	case "$1" in
+	preinit)
+		status_led_blink_preinit
+		;;
+	failsafe)
+		status_led_blink_failsafe
+		;;
+	preinit_regular)
+		status_led_blink_preinit_regular
+		;;
+	done)
+		if [ "${status_led/power}" != "$status_led" ]; then
+			status_led_on
+		else
+			status_led_off
+		fi
+		;;
+	esac
+}
diff --git a/target/linux/bcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/bcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
new file mode 100644
index 0000000000..0e92481f08
--- /dev/null
+++ b/target/linux/bcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -0,0 +1,25 @@
+#!/bin/sh
+# Based on gabors ralink wisoc implementation.
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"rt2x00.eeprom" )
+	case $board in
+	huawei,echolife-hg556a-c)
+		caldata_extract "cal_data" 0x1fe00 0x200
+		;;
+	huawei,echolife-hg622|\
+	huawei,echolife-hg655b)
+		caldata_extract "cal_data" 0x0 0x200
+		;;
+	*)
+		caldata_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+esac
diff --git a/target/linux/bcm63xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bcm63xx/base-files/etc/uci-defaults/09_fix_crc
new file mode 100644
index 0000000000..c33e56f28e
--- /dev/null
+++ b/target/linux/bcm63xx/base-files/etc/uci-defaults/09_fix_crc
@@ -0,0 +1,43 @@
+#!/bin/sh
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+#
+
+. /lib/functions.sh
+
+do_fixcrc() {
+	mtd fixtrx linux
+}
+
+case "$(board_name)" in
+	actiontec,r1000h|\
+	adb,a4001n|\
+	adb,a4001n1|\
+	brcm,bcm96328avng|\
+	brcm,bcm963281tan|\
+	bt,voyager-2110|\
+	bt,voyager-2500v-bb|\
+	comtrend,ar-5315u|\
+	comtrend,ar-5381u|\
+	comtrend,ar-5387un|\
+	comtrend,vr-3025u|\
+	comtrend,vr-3025un|\
+	comtrend,vr-3026e|\
+	comtrend,wap-5813n|\
+	comtrend,ct-6373|\
+	d-link,dsl-274xb-f1|\
+	dynalink,rta770bw|\
+	dynalink,rta770w|\
+	huawei,echolife-hg622|\
+	netgear,evg2000|\
+	nucom,r5010un-v2|\
+	observa,vh4032n|\
+	t-com,speedport-w-303v|\
+	telsey,cpva502plus|\
+	telsey,cpva642|\
+	telsey,magic|\
+	zyxel,p870hw-51a-v2)
+		do_fixcrc
+		;;
+esac
diff --git a/target/linux/bcm63xx/base-files/lib/upgrade/platform.sh b/target/linux/bcm63xx/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000000..5c9e2c25f7
--- /dev/null
+++ b/target/linux/bcm63xx/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,16 @@
+PART_NAME=linux
+platform_check_image() {
+	[ "$#" -gt 1 ] && return 1
+	case "$(get_magic_word "$1")" in
+		3600|3700|3800)
+			# 6348GW-11 boards use openwrt-96348GW-11-squashfs-cfe.bin files
+			return 0
+			;;
+		*)
+			echo "Invalid image type. Please use only .bin files"
+			return 1
+			;;
+	esac
+}
+
+# use default for platform_do_upgrade()