aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm53xx
diff options
context:
space:
mode:
authorChristoph Krapp <achterin@googlemail.com>2020-03-02 22:24:19 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-03-09 21:47:56 +0100
commit2a18840cc773425668fdfd99429d74ef0ab3a8ef (patch)
treecfc08c2ffd618824a54d27465e68851c61662a93 /target/linux/bcm53xx
parentf9f62d43e448f58d25749efa8b2aabc7f2d51e53 (diff)
downloadupstream-2a18840cc773425668fdfd99429d74ef0ab3a8ef.tar.gz
upstream-2a18840cc773425668fdfd99429d74ef0ab3a8ef.tar.bz2
upstream-2a18840cc773425668fdfd99429d74ef0ab3a8ef.zip
ramips: add support for TP-Link RE210 v1
Hardware -------- SoC: MediaTek MT7620A RAM: 64MB FLASH: 8MB SPI WLAN: 2G: MediaTek MT7620A 5G: MediaTek MT7610EN ETH: 1x 10/100/1000M (Atheros AR8035) LED: RSSI (orange/green) WiFi 2G (green) WiFi 5G (green) Power (green) System (red / green) BTN: Power Reset LED WPS Serial ------ P1 - Tx P2 - Rx P3 - GND P4 - VCC Pin 4 is the one closest to the LAN port. MAC overview ------------ WAN *:4c uboot 0x1fc00 2.4 *:4c uboot 0x1fc00 5 *:4e uboot 0x1fc00 +2 Installation ------------ Web interface: It is possible to upgrade to OpenWrt via the web interface. However, the OEM firmware upgrade file is required and a tool to fix the MD5 sum of the header. This procedure overwrites U-Boot and there is not failsafe / recovery mode present! To prepare an image, you need to take the header and U-Boot (i.e. 0x200 + 0x20000 bytes) from an OEM firmware file and attach the factory image to it. Then fix the header MD5Sum1. Serial/TFTP: You can use initramfs for booting via RAM or flash the image directly. Additional Notes: If the web interface upgrade fails, you have to open your device and attach serial console. Since the web upgrade overwrites the boot loader, you might also brick your device. In order to flash back to stock, the first header and U-Boot needs to be stripped from the original firmware. Signed-off-by: Christoph Krapp <achterin@googlemail.com> [change rssi LED labels] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/bcm53xx')
0 files changed, 0 insertions, 0 deletions