bcm53xx: backport clk driver fix for DT nodes names

It allows dropping downstream patch renaming DT nodes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 77d9cce604d32005ddb90e91c6cc9b9cf35068d7)

1 files changed, 0 insertions, 62 deletions

diff --git a/target/linux/bcm53xx/patches-5.10/320-ARM-dts-BCM5301X-Switch-back-to-old-clock-nodes-name.patch b/target/linux/bcm53xx/patches-5.10/320-ARM-dts-BCM5301X-Switch-back-to-old-clock-nodes-name.patch
deleted file mode 100644
index cee37732ab..0000000000
--- a/target/linux/bcm53xx/patches-5.10/320-ARM-dts-BCM5301X-Switch-back-to-old-clock-nodes-name.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 23 Nov 2021 13:13:05 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Switch back to old clock nodes names
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-First of all using the same node name prefix resulted in trying to
-register 2 clocks under the same "clock-controller" name:
-
-[    0.000000] __clk_core_init: clk clock-controller already initialized
-[    0.000000] ------------[ cut here ]------------
-[    0.000000] WARNING: CPU: 0 PID: 0 at drivers/clk/bcm/clk-iproc-pll.c:802 iproc_pll_clk_setup+0x4c8/0x4f4
-[    0.000000] Modules linked in:
-[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.80 #0
-[    0.000000] Hardware name: BCM5301X
-[    0.000000] [<c0108410>] (unwind_backtrace) from [<c0104bc4>] (show_stack+0x10/0x14)
-[    0.000000] [<c0104bc4>] (show_stack) from [<c03dca28>] (dump_stack+0x94/0xa8)
-[    0.000000] [<c03dca28>] (dump_stack) from [<c0118440>] (__warn+0xb8/0x114)
-[    0.000000] [<c0118440>] (__warn) from [<c0118504>] (warn_slowpath_fmt+0x68/0x78)
-[    0.000000] [<c0118504>] (warn_slowpath_fmt) from [<c043281c>] (iproc_pll_clk_setup+0x4c8/0x4f4)
-[    0.000000] [<c043281c>] (iproc_pll_clk_setup) from [<c0818c04>] (nsp_genpll_clk_init+0x30/0x38)
-[    0.000000] [<c0818c04>] (nsp_genpll_clk_init) from [<c0818634>] (of_clk_init+0x118/0x1f8)
-[    0.000000] [<c0818634>] (of_clk_init) from [<c08039b0>] (time_init+0x24/0x30)
-[    0.000000] [<c08039b0>] (time_init) from [<c0800d14>] (start_kernel+0x398/0x50c)
-[    0.000000] [<c0800d14>] (start_kernel) from [<00000000>] (0x0)
-[    0.000000] ---[ end trace fe236bfe9559ee50 ]---
-
-Secondly using any other names than "lcpll0" and "genpll" breaks output
-clocks:
-
-$ cat /sys/kernel/debug/clk/usbclk/clk_rate
-0
-
-For some reason iproc_clk_recalc_rate() gets called with "parent_rate"
-argument 0 whenever clocks aren't named "lcpll0" and "genpll".
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -421,7 +421,7 @@
- 			#address-cells = <1>;
- 			#size-cells = <1>;
- 
--			lcpll0: clock-controller@100 {
-+			lcpll0: lcpll0@100 {
- 				#clock-cells = <1>;
- 				compatible = "brcm,nsp-lcpll0";
- 				reg = <0x100 0x14>;
-@@ -430,7 +430,7 @@
- 						     "sdio", "ddr_phy";
- 			};
- 
--			genpll: clock-controller@140 {
-+			genpll: genpll@140 {
- 				#clock-cells = <1>;
- 				compatible = "brcm,nsp-genpll";
- 				reg = <0x140 0x24>;