bcm53xx: use more upsteam DT patches from 5.16 / 5.17

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

1 files changed, 104 insertions, 0 deletions

diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0004-ARM-BCM53016-MR32-convert-to-Broadcom-iProc-I2C-Driv.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0004-ARM-BCM53016-MR32-convert-to-Broadcom-iProc-I2C-Driv.patch
new file mode 100644
index 0000000000..fae0f02cdf
--- /dev/null
+++ b/target/linux/bcm53xx/patches-5.10/034-v5.17-0004-ARM-BCM53016-MR32-convert-to-Broadcom-iProc-I2C-Driv.patch
@@ -0,0 +1,104 @@
+From de7880016665afe7fa7d40e1fafa859260d53ba1 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Thu, 28 Oct 2021 09:03:44 +0200
+Subject: [PATCH] ARM: BCM53016: MR32: convert to Broadcom iProc I2C Driver
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+replaces the bit-banged i2c-gpio provided i2c functionality
+with the hardware in the SoC.
+
+During review of the MR32, Florian Fainelli pointed out that the
+SoC has a real I2C-controller. Furthermore, the connected pins
+(SDA and SCL) would line up perfectly for use. Back then I couldn't
+get it working though and I left it with i2c-gpio (which worked).
+
+Now we know the reason: the interrupt was incorrectly specified.
+(Hence, this patch depends on Florian Fainelli's
+"ARM: dts: BCM5301X: Fix I2C controller interrupt" patch).
+
+Cc: Florian Fainelli <f.fainelli@gmail.com>
+Cc: Rafał Miłecki <zajec5@gmail.com>
+Cc: Matthew Hagan <mnhagan88@gmail.com>
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 62 ++++++++++------------
+ 1 file changed, 28 insertions(+), 34 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+@@ -84,40 +84,6 @@
+ 			max-brightness = <255>;
+ 		};
+ 	};
+-
+-	i2c {
+-		/*
+-		 * The platform provided I2C does not budge.
+-		 * This is a replacement until I can figure
+-		 * out what are the missing bits...
+-		 */
+-
+-		compatible = "i2c-gpio";
+-		sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+-		scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+-		i2c-gpio,delay-us = <10>; /* close to 100 kHz */
+-		#address-cells = <1>;
+-		#size-cells = <0>;
+-
+-		current_sense: ina219@45 {
+-			compatible = "ti,ina219";
+-			reg = <0x45>;
+-			shunt-resistor = <60000>; /* = 60 mOhms */
+-		};
+-
+-		eeprom: eeprom@50 {
+-			compatible = "atmel,24c64";
+-			reg = <0x50>;
+-			pagesize = <32>;
+-			read-only;
+-			#address-cells = <1>;
+-			#size-cells = <1>;
+-
+-			mac_address: mac-address@66 {
+-				reg = <0x66 0x6>;
+-			};
+-		};
+-	};
+ };
+ 
+ &uart0 {
+@@ -228,3 +194,31 @@
+ 		};
+ 	};
+ };
++
++&i2c0 {
++	status = "okay";
++
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinmux_i2c>;
++
++	clock-frequency = <100000>;
++
++	current_sense: ina219@45 {
++		compatible = "ti,ina219";
++		reg = <0x45>;
++		shunt-resistor = <60000>; /* = 60 mOhms */
++	};
++
++	eeprom: eeprom@50 {
++		compatible = "atmel,24c64";
++		reg = <0x50>;
++		pagesize = <32>;
++		read-only;
++		#address-cells = <1>;
++		#size-cells = <1>;
++
++		mac_address: mac-address@66 {
++			reg = <0x66 0x6>;
++		};
++	};
++};