bcm53xx: add Linux 4.9 patches

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

1 files changed, 136 insertions, 0 deletions

diff --git a/target/linux/bcm53xx/patches-4.9/032-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch b/target/linux/bcm53xx/patches-4.9/032-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch
new file mode 100644
index 0000000000..cf6bc2e335
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.9/032-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch
@@ -0,0 +1,136 @@
+From 514647c9af870bd2df2e579134a26bff8d17b6b9 Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Sat, 14 Jan 2017 19:29:28 -0700
+Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-1200
+
+Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial
+flash (for bootloader and NVRAM) and NAND flash (for firmware).
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile                    |   1 +
+ arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 107 ++++++++++++++++++++++++++
+ 2 files changed, 108 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -74,6 +74,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ 	bcm47081-buffalo-wzr-600dhp2.dtb \
+ 	bcm47081-buffalo-wzr-900dhp.dtb \
+ 	bcm47081-luxul-xap-1410.dtb \
++	bcm47081-luxul-xwr-1200.dtb \
+ 	bcm4709-asus-rt-ac87u.dtb \
+ 	bcm4709-buffalo-wxr-1900dhp.dtb \
+ 	bcm4709-netgear-r7000.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+@@ -0,0 +1,107 @@
++/*
++ * Copyright 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm47081.dtsi"
++#include "bcm5301x-nand-cs0-bch4.dtsi"
++
++/ {
++	compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
++	model = "Luxul XWR-1200 V1";
++
++	chosen {
++		bootargs = "console=ttyS0,115200";
++	};
++
++	memory {
++		reg = <0x00000000 0x08000000>;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		power {
++			label = "bcm53xx:green:power";
++			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-on";
++		};
++
++		lan3 {
++			label = "bcm53xx:green:lan3";
++			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "none";
++		};
++
++		lan4 {
++			label = "bcm53xx:green:lan4";
++			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "none";
++		};
++
++		wan {
++			label = "bcm53xx:green:wan";
++			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "none";
++		};
++
++		lan2 {
++			label = "bcm53xx:green:lan2";
++			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "none";
++		};
++
++		usb {
++			label = "bcm53xx:green:usb";
++			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "none";
++		};
++
++		status {
++			label = "bcm53xx:green:status";
++			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "timer";
++		};
++
++		2ghz {
++			label = "bcm53xx:green:2ghz";
++			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "none";
++		};
++
++		5ghz {
++			label = "bcm53xx:green:5ghz";
++			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "none";
++		};
++
++		lan1 {
++			label = "bcm53xx:green:lan1";
++			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "none";
++		};
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		restart {
++			label = "Reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&usb2 {
++	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
++};
++
++&spi_nor {
++	status = "okay";
++};