bcm53xx: backport BCM5301X patches from 2019-09-30

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

1 files changed, 93 insertions, 0 deletions

diff --git a/target/linux/bcm53xx/patches-4.4/044-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch b/target/linux/bcm53xx/patches-4.4/044-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch
new file mode 100644
index 0000000000..3052bd0f46
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/044-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch
@@ -0,0 +1,93 @@
+From 46daccf62d1651bf8b09978478ca6465a7a81f47 Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Tue, 27 Sep 2016 11:27:10 -0600
+Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XAP-1510
+
+Luxul XAP-1510 is an AP device based on BCM4708 SoC with 2 x BCM4360
+chipsets on PCB connected using PCIe.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile                   |  1 +
+ arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 64 ++++++++++++++++++++++++++++
+ 2 files changed, 65 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ 	bcm4708-asus-rt-ac56u.dtb \
+ 	bcm4708-asus-rt-ac68u.dtb \
+ 	bcm4708-buffalo-wzr-1750dhp.dtb \
++	bcm4708-luxul-xap-1510.dtb \
+ 	bcm4708-luxul-xwc-1000.dtb \
+ 	bcm4708-netgear-r6250.dtb \
+ 	bcm4708-netgear-r6300-v2.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+@@ -0,0 +1,64 @@
++/*
++ * Copyright 2016 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++
++/ {
++	compatible = "luxul,xap-1510v1", "brcm,bcm4708";
++	model = "Luxul XAP-1510 V1";
++
++	chosen {
++		bootargs = "console=ttyS0,115200 earlycon";
++	};
++
++	memory {
++		reg = <0x00000000 0x08000000>;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		5ghz {
++			label = "bcm53xx:blue:5ghz";
++			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "none";
++		};
++
++		2ghz {
++			label = "bcm53xx:blue:2ghz";
++			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "none";
++		};
++
++		status {
++			label = "bcm53xx:green:status";
++			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "timer";
++		};
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		restart {
++			label = "Reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	status = "okay";
++};
++
++&spi_nor {
++	status = "okay";
++};