aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm53xx/patches-4.14
diff options
context:
space:
mode:
authorRafał Miłecki <rafal@milecki.pl>2018-10-11 10:01:45 +0200
committerRafał Miłecki <rafal@milecki.pl>2018-10-11 10:04:46 +0200
commit92de28b751a473655fd0cf3d3a8b81ca1d27d758 (patch)
tree0a878c6d3c2250780c8dad4de1d3658cd905c0b3 /target/linux/bcm53xx/patches-4.14
parentd24bdaa794fec4173859e45ac3b7c773b199bd45 (diff)
downloadupstream-92de28b751a473655fd0cf3d3a8b81ca1d27d758.tar.gz
upstream-92de28b751a473655fd0cf3d3a8b81ca1d27d758.tar.bz2
upstream-92de28b751a473655fd0cf3d3a8b81ca1d27d758.zip
bcm53xx: replace SPI revert with a fix sent upstream
Instead of reverting whole commit it's enough to just revert a single line change. It seems the real problem with the regressing commit was a bump of read chunk size. Switching back to 256 B chunks is enough to fix the problem/regression. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Diffstat (limited to 'target/linux/bcm53xx/patches-4.14')
-rw-r--r--target/linux/bcm53xx/patches-4.14/180-spi-bcm-qspi-switch-back-to-reading-flash-using-smal.patch42
-rw-r--r--target/linux/bcm53xx/patches-4.14/800-Revert-spi-bcm-qspi-Fix-bcm_qspi_bspi_read-performan.patch146
2 files changed, 42 insertions, 146 deletions
diff --git a/target/linux/bcm53xx/patches-4.14/180-spi-bcm-qspi-switch-back-to-reading-flash-using-smal.patch b/target/linux/bcm53xx/patches-4.14/180-spi-bcm-qspi-switch-back-to-reading-flash-using-smal.patch
new file mode 100644
index 0000000000..4b3056591e
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.14/180-spi-bcm-qspi-switch-back-to-reading-flash-using-smal.patch
@@ -0,0 +1,42 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 11 Oct 2018 09:07:31 +0200
+Subject: [PATCH FIX] spi: bcm-qspi: switch back to reading flash using smaller
+ chunks
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Fixing/optimizing bcm_qspi_bspi_read() performance introduced two
+changes:
+1) It added a loop to read all requested data using multiple BSPI ops.
+2) It bumped max size of a single BSPI block request from 256 to 512 B.
+
+The later change resulted in occasional BSPI timeouts causing a
+regression.
+
+For some unknown reason hardware doesn't always handle reads as expected
+when using 512 B chunks. In such cases it may happen that BSPI returns
+amount of requested bytes without the last 1-3 ones. It provides the
+remaining bytes later but doesn't raise an interrupt until another LR
+start.
+
+Switching back to 256 B reads fixes that problem and regression.
+
+Fixes: 345309fa7c0c ("spi: bcm-qspi: Fix bcm_qspi_bspi_read() performance")
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Cc: stable@vger.kernel.org # 4.11+
+---
+ drivers/spi/spi-bcm-qspi.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/spi/spi-bcm-qspi.c
++++ b/drivers/spi/spi-bcm-qspi.c
+@@ -88,7 +88,7 @@
+ #define BSPI_BPP_MODE_SELECT_MASK BIT(8)
+ #define BSPI_BPP_ADDR_SELECT_MASK BIT(16)
+
+-#define BSPI_READ_LENGTH 512
++#define BSPI_READ_LENGTH 256
+
+ /* MSPI register offsets */
+ #define MSPI_SPCR0_LSB 0x000
diff --git a/target/linux/bcm53xx/patches-4.14/800-Revert-spi-bcm-qspi-Fix-bcm_qspi_bspi_read-performan.patch b/target/linux/bcm53xx/patches-4.14/800-Revert-spi-bcm-qspi-Fix-bcm_qspi_bspi_read-performan.patch
deleted file mode 100644
index 64f971d349..0000000000
--- a/target/linux/bcm53xx/patches-4.14/800-Revert-spi-bcm-qspi-Fix-bcm_qspi_bspi_read-performan.patch
+++ /dev/null
@@ -1,146 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] Revert "spi: bcm-qspi: Fix bcm_qspi_bspi_read() performance"
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit 345309fa7c0c9206a5344d379b174499952d79d9.
-
-BSPI reads became unstable starting with above commit. There are BSPI
-timeouts like this:
-[ 15.637809] bcm_iproc 18029200.spi: timeout waiting for BSPI
-(...)
-[ 15.997809] bcm_iproc 18029200.spi: timeout waiting for BSPI
-which cause filesystem stability problems.
-
-Before above commit every time that bcm_qspi_bspi_lr_l2_isr() called
-bcm_qspi_bspi_lr_l2_isr() it was resulting in bspi_rf_msg_len becoming
-0.
-With that change it's not the case anymore which suggests there may be
-some bug around that code.
-
-It has changed and the new behavior seems to be causing problems.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/spi/spi-bcm-qspi.c
-+++ b/drivers/spi/spi-bcm-qspi.c
-@@ -88,7 +88,7 @@
- #define BSPI_BPP_MODE_SELECT_MASK BIT(8)
- #define BSPI_BPP_ADDR_SELECT_MASK BIT(16)
-
--#define BSPI_READ_LENGTH 512
-+#define BSPI_READ_LENGTH 256
-
- /* MSPI register offsets */
- #define MSPI_SPCR0_LSB 0x000
-@@ -806,7 +806,7 @@ static int bcm_qspi_bspi_flash_read(stru
- struct spi_flash_read_message *msg)
- {
- struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
-- u32 addr = 0, len, rdlen, len_words;
-+ u32 addr = 0, len, len_words;
- int ret = 0;
- unsigned long timeo = msecs_to_jiffies(100);
- struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
-@@ -819,7 +819,7 @@ static int bcm_qspi_bspi_flash_read(stru
- bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
-
- /*
-- * when using flex mode we need to send
-+ * when using flex mode mode we need to send
- * the upper address byte to bspi
- */
- if (bcm_qspi_bspi_ver_three(qspi) == false) {
-@@ -833,56 +833,47 @@ static int bcm_qspi_bspi_flash_read(stru
- else
- addr = msg->from & 0x00ffffff;
-
-+ /* set BSPI RAF buffer max read length */
-+ len = msg->len;
-+ if (len > BSPI_READ_LENGTH)
-+ len = BSPI_READ_LENGTH;
-+
- if (bcm_qspi_bspi_ver_three(qspi) == true)
- addr = (addr + 0xc00000) & 0xffffff;
-
-- /*
-- * read into the entire buffer by breaking the reads
-- * into RAF buffer read lengths
-- */
-- len = msg->len;
-+ reinit_completion(&qspi->bspi_done);
-+ bcm_qspi_enable_bspi(qspi);
-+ len_words = (len + 3) >> 2;
-+ qspi->bspi_rf_msg = msg;
-+ qspi->bspi_rf_msg_status = 0;
- qspi->bspi_rf_msg_idx = 0;
-+ qspi->bspi_rf_msg_len = len;
-+ dev_dbg(&qspi->pdev->dev, "bspi xfr addr 0x%x len 0x%x", addr, len);
-
-- do {
-- if (len > BSPI_READ_LENGTH)
-- rdlen = BSPI_READ_LENGTH;
-- else
-- rdlen = len;
--
-- reinit_completion(&qspi->bspi_done);
-- bcm_qspi_enable_bspi(qspi);
-- len_words = (rdlen + 3) >> 2;
-- qspi->bspi_rf_msg = msg;
-- qspi->bspi_rf_msg_status = 0;
-- qspi->bspi_rf_msg_len = rdlen;
-- dev_dbg(&qspi->pdev->dev,
-- "bspi xfr addr 0x%x len 0x%x", addr, rdlen);
-- bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr);
-- bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
-- bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
-- if (qspi->soc_intc) {
-- /*
-- * clear soc MSPI and BSPI interrupts and enable
-- * BSPI interrupts.
-- */
-- soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE);
-- soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true);
-- }
-+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr);
-+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
-+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
-+
-+ if (qspi->soc_intc) {
-+ /*
-+ * clear soc MSPI and BSPI interrupts and enable
-+ * BSPI interrupts.
-+ */
-+ soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE);
-+ soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true);
-+ }
-
-- /* Must flush previous writes before starting BSPI operation */
-- mb();
-- bcm_qspi_bspi_lr_start(qspi);
-- if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) {
-- dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n");
-- ret = -ETIMEDOUT;
-- break;
-- }
-+ /* Must flush previous writes before starting BSPI operation */
-+ mb();
-
-- /* set msg return length */
-- msg->retlen += rdlen;
-- addr += rdlen;
-- len -= rdlen;
-- } while (len);
-+ bcm_qspi_bspi_lr_start(qspi);
-+ if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) {
-+ dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n");
-+ ret = -ETIMEDOUT;
-+ } else {
-+ /* set the return length for the caller */
-+ msg->retlen = len;
-+ }
-
- return ret;
- }