bcm53xx: add early support for kernel 4.14

Don't switch to it by default yet as it requires more testing.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

1 files changed, 96 insertions, 0 deletions

diff --git a/target/linux/bcm53xx/patches-4.14/035-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch b/target/linux/bcm53xx/patches-4.14/035-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch
new file mode 100644
index 0000000000..76bc739dde
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.14/035-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch
@@ -0,0 +1,96 @@
+From 65f78c4c41a9b9a7637e1dda2d5e41cf26ea971c Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Mon, 9 Oct 2017 09:46:23 -0600
+Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
+board design.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile                    |  1 +
+ arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++
+ 2 files changed, 64 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ 	bcm4709-tplink-archer-c9-v1.dtb \
+ 	bcm47094-dlink-dir-885l.dtb \
+ 	bcm47094-linksys-panamera.dtb \
++	bcm47094-luxul-abr-4500.dtb \
+ 	bcm47094-luxul-xbr-4500.dtb \
+ 	bcm47094-luxul-xwr-3100.dtb \
+ 	bcm47094-netgear-r8500.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+@@ -0,0 +1,63 @@
++/*
++ * Copyright (C) 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++	compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
++	model = "Luxul ABR-4500 V1";
++
++	chosen {
++		bootargs = "earlycon";
++	};
++
++	memory {
++		reg = <0x00000000 0x08000000
++		       0x88000000 0x18000000>;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		status {
++			label = "bcm53xx:green:status";
++			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "timer";
++		};
++
++		usb3 {
++			label = "bcm53xx:green:usb3";
++			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>,
++				<&xhci_port1>;
++			linux,default-trigger = "usbport";
++		};
++
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		restart {
++			label = "Reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&usb3 {
++	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++};
++
++&spi_nor {
++	status = "okay";
++};