bcm53xx: delete old kernel versions

Signed-off-by: Felix Fietkau <nbd@nbd.name>

1 files changed, 0 insertions, 111 deletions

diff --git a/target/linux/bcm53xx/patches-4.1/090-mtd-nand-add-common-DT-init-code.patch b/target/linux/bcm53xx/patches-4.1/090-mtd-nand-add-common-DT-init-code.patch
deleted file mode 100644
index cb2141a4b9..0000000000
--- a/target/linux/bcm53xx/patches-4.1/090-mtd-nand-add-common-DT-init-code.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From 5844feeaa4154d1c46d3462c7a4653d22356d8b4 Mon Sep 17 00:00:00 2001
-From: Brian Norris <computersforpeace@gmail.com>
-Date: Fri, 23 Jan 2015 00:22:27 -0800
-Subject: [PATCH 20/32] mtd: nand: add common DT init code
-
-These are already-documented common bindings for NAND chips. Let's
-handle them in nand_base.
-
-If NAND controller drivers need to act on this data before bringing up
-the NAND chip (e.g., fill out ECC callback functions, change HW modes,
-etc.), then they can do so between calling nand_scan_ident() and
-nand_scan_tail().
-
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/nand/nand_base.c | 41 +++++++++++++++++++++++++++++++++++++++++
- include/linux/mtd/nand.h     |  5 +++++
- 2 files changed, 46 insertions(+)
-
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -48,6 +48,7 @@
- #include <linux/leds.h>
- #include <linux/io.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of_mtd.h>
- 
- /* Define default oob placement schemes for large and small page devices */
- static struct nand_ecclayout nand_oob_8 = {
-@@ -3798,6 +3799,39 @@ ident_done:
- 	return type;
- }
- 
-+static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip,
-+			struct device_node *dn)
-+{
-+	int ecc_mode, ecc_strength, ecc_step;
-+
-+	if (of_get_nand_bus_width(dn) == 16)
-+		chip->options |= NAND_BUSWIDTH_16;
-+
-+	if (of_get_nand_on_flash_bbt(dn))
-+		chip->bbt_options |= NAND_BBT_USE_FLASH;
-+
-+	ecc_mode = of_get_nand_ecc_mode(dn);
-+	ecc_strength = of_get_nand_ecc_strength(dn);
-+	ecc_step = of_get_nand_ecc_step_size(dn);
-+
-+	if ((ecc_step >= 0 && !(ecc_strength >= 0)) ||
-+	    (!(ecc_step >= 0) && ecc_strength >= 0)) {
-+		pr_err("must set both strength and step size in DT\n");
-+		return -EINVAL;
-+	}
-+
-+	if (ecc_mode >= 0)
-+		chip->ecc.mode = ecc_mode;
-+
-+	if (ecc_strength >= 0)
-+		chip->ecc.strength = ecc_strength;
-+
-+	if (ecc_step > 0)
-+		chip->ecc.size = ecc_step;
-+
-+	return 0;
-+}
-+
- /**
-  * nand_scan_ident - [NAND Interface] Scan for the NAND device
-  * @mtd: MTD device structure
-@@ -3815,6 +3849,13 @@ int nand_scan_ident(struct mtd_info *mtd
- 	int i, nand_maf_id, nand_dev_id;
- 	struct nand_chip *chip = mtd->priv;
- 	struct nand_flash_dev *type;
-+	int ret;
-+
-+	if (chip->dn) {
-+		ret = nand_dt_init(mtd, chip, chip->dn);
-+		if (ret)
-+			return ret;
-+	}
- 
- 	/* Set the default functions */
- 	nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);
---- a/include/linux/mtd/nand.h
-+++ b/include/linux/mtd/nand.h
-@@ -26,6 +26,8 @@
- 
- struct mtd_info;
- struct nand_flash_dev;
-+struct device_node;
-+
- /* Scan and identify a NAND device */
- extern int nand_scan(struct mtd_info *mtd, int max_chips);
- /*
-@@ -542,6 +544,7 @@ struct nand_buffers {
-  *			flash device
-  * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the
-  *			flash device.
-+ * @dn:			[BOARDSPECIFIC] device node describing this instance
-  * @read_byte:		[REPLACEABLE] read one byte from the chip
-  * @read_word:		[REPLACEABLE] read one word from the chip
-  * @write_byte:		[REPLACEABLE] write a single byte to the chip on the
-@@ -644,6 +647,8 @@ struct nand_chip {
- 	void __iomem *IO_ADDR_R;
- 	void __iomem *IO_ADDR_W;
- 
-+	struct device_node *dn;
-+
- 	uint8_t (*read_byte)(struct mtd_info *mtd);
- 	u16 (*read_word)(struct mtd_info *mtd);
- 	void (*write_byte)(struct mtd_info *mtd, uint8_t byte);