diff options
| author | Rafał Miłecki <zajec5@gmail.com> | 2015-05-16 17:14:25 +0000 |
|---|---|---|
| committer | Rafał Miłecki <zajec5@gmail.com> | 2015-05-16 17:14:25 +0000 |
| commit | d1f2cc220af68d58a0cc18ed4b0b63c757a5e2f1 (patch) | |
| tree | 4f50fcbc05092278c7cb2d742b62a422c0b2acf7 /target/linux/bcm53xx/base-files | |
| parent | 9dfbfe30e0e2f725fb08324ffd96738c72badf54 (diff) | |
| download | upstream-d1f2cc220af68d58a0cc18ed4b0b63c757a5e2f1.tar.gz upstream-d1f2cc220af68d58a0cc18ed4b0b63c757a5e2f1.tar.bz2 upstream-d1f2cc220af68d58a0cc18ed4b0b63c757a5e2f1.zip | |
bcm53xx: try to fix network on Asus RT-AC87U
This device seems to have switch port 7 connected to the CPU:
vlan1ports=1 2 3 5 7*
vlan2ports=0 7u
it should be handled by eth1 and NVRAM seems to confirm that (no
et0macaddr entry, existing et1macaddr & et1phyaddr entries).
One of the remaining ports (4/8?) may be connected to the Quantenna SoC.
Original firmware boot log contains following messages:
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(why does it force port 5 state?!)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45692 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/bcm53xx/base-files')
| -rwxr-xr-x | target/linux/bcm53xx/base-files/etc/board.d/02_network | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network index 4263615e83..ad004d792c 100755 --- a/target/linux/bcm53xx/base-files/etc/board.d/02_network +++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network @@ -9,6 +9,9 @@ board_config_update board=$(cat /proc/device-tree/compatible | tr '\0' '\t' | cut -f 1) case "$board" in +asus,rt-ac87u) + ifname=eth1 + ;; netgear,r8000) ifname=eth2 ;; @@ -32,6 +35,10 @@ if echo "$vlan1ports" | egrep -q "^1 2 3 4 5" && \ echo "$vlan2ports" | egrep -q "^0 5"; then ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t" ucidef_add_switch_vlan "switch0" "2" "0 5t" +elif echo "$vlan1ports" | egrep -q "^1 2 3 5 7" && \ + echo "$vlan2ports" | egrep -q "^0 7"; then + ucidef_add_switch_vlan "switch0" "1" "1 2 3 5 7t" + ucidef_add_switch_vlan "switch0" "2" "0 7t" elif echo "$vlan1ports" | egrep -q "^0 1 2 3 5 7 8" && \ echo "$vlan2ports" | egrep -q "^4 8"; then ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5 7 8t" |