kernel: delete Linux 5.4 config and patches

As the upcoming release will be based on Linux 5.10 only, remove all
kernel configuration as well as patches for Linux 5.4.
There were no targets still actively using Linux 5.4.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 3a14580411adfb75f9a44eded9f41245b9e44606)

1 files changed, 0 insertions, 108 deletions

diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0006-dt-bindings-Add-Broadcom-STB-USB-PHY-binding-documen.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0006-dt-bindings-Add-Broadcom-STB-USB-PHY-binding-documen.patch
deleted file mode 100644
index 2a57d1dc80..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0006-dt-bindings-Add-Broadcom-STB-USB-PHY-binding-documen.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From b11df0c9efbbe2b52c5133ca15030f01b43ec6ef Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:18:04 -0500
-Subject: [PATCH] dt-bindings: Add Broadcom STB USB PHY binding document
-
-Add support for bcm7216 and bcm7211
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- .../bindings/phy/brcm,brcmstb-usb-phy.txt     | 69 +++++++++++++++----
- 1 file changed, 56 insertions(+), 13 deletions(-)
-
---- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
-+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
-@@ -1,30 +1,49 @@
- Broadcom STB USB PHY
- 
- Required properties:
-- - compatible: brcm,brcmstb-usb-phy
-- - reg: two offset and length pairs.
--	The first pair specifies a manditory set of memory mapped
--	registers used for general control of the PHY.
--	The second pair specifies optional registers used by some of
--	the SoCs that support USB 3.x
-- - #phy-cells: Shall be 1 as it expects one argument for setting
--	       the type of the PHY. Possible values are:
--	       - PHY_TYPE_USB2 for USB1.1/2.0 PHY
--	       - PHY_TYPE_USB3 for USB3.x PHY
-+- compatible: should be one of
-+	"brcm,brcmstb-usb-phy"
-+	"brcm,bcm7216-usb-phy"
-+	"brcm,bcm7211-usb-phy"
-+
-+- reg and reg-names properties requirements are specific to the
-+  compatible string.
-+  "brcm,brcmstb-usb-phy":
-+    - reg: 1 or 2 offset and length pairs. One for the base CTRL registers
-+           and an optional pair for systems with USB 3.x support
-+    - reg-names: not specified
-+  "brcm,bcm7216-usb-phy":
-+    - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL
-+           registers
-+    - reg-names: "ctrl", "xhci_ec", "xhci_gbl"
-+  "brcm,bcm7211-usb-phy":
-+    - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL,
-+           USB_PHY and USB_MDIO registers and an optional pair
-+	   for the BDC registers
-+    - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
-+
-+- #phy-cells: Shall be 1 as it expects one argument for setting
-+	      the type of the PHY. Possible values are:
-+	      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
-+	      - PHY_TYPE_USB3 for USB3.x PHY
- 
- Optional Properties:
- - clocks : clock phandles.
- - clock-names: String, clock name.
-+- interrupts: wakeup interrupt
-+- interrupt-names: "wakeup"
- - brcm,ipp: Boolean, Invert Port Power.
-   Possible values are: 0 (Don't invert), 1 (Invert)
- - brcm,ioc: Boolean, Invert Over Current detection.
-   Possible values are: 0 (Don't invert), 1 (Invert)
--NOTE: one or both of the following two properties must be set
--- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
--- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
- - dr_mode: String, PHY Device mode.
-   Possible values are: "host", "peripheral ", "drd" or "typec-pd"
-   If this property is not defined, the phy will default to "host" mode.
-+- brcm,syscon-piarbctl: phandle to syscon for handling config registers
-+NOTE: one or both of the following two properties must be set
-+- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
-+- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
-+
- 
- Example:
- 
-@@ -41,3 +60,27 @@ usbphy_0: usb-phy@f0470200 {
- 	clocks = <&usb20>, <&usb30>;
- 	clock-names = "sw_usb", "sw_usb3";
- };
-+
-+usb-phy@29f0200 {
-+	reg = <0x29f0200 0x200>,
-+		<0x29c0880 0x30>,
-+		<0x29cc100 0x534>,
-+		<0x2808000 0x24>,
-+		<0x2980080 0x8>;
-+	reg-names = "ctrl",
-+		"xhci_ec",
-+		"xhci_gbl",
-+		"usb_phy",
-+		"usb_mdio";
-+	brcm,ioc = <0x0>;
-+	brcm,ipp = <0x0>;
-+	compatible = "brcm,bcm7211-usb-phy";
-+	interrupts = <0x30>;
-+	interrupt-parent = <&vpu_intr1_nosec_intc>;
-+	interrupt-names = "wake";
-+	#phy-cells = <0x1>;
-+	brcm,has-xhci;
-+	syscon-piarbctl = <&syscon_piarbctl>;
-+	clocks = <&scmi_clk 256>;
-+	clock-names = "sw_usb";
-+};