kernel: delete Linux 5.4 config and patches

As the upcoming release will be based on Linux 5.10 only, remove all
kernel configuration as well as patches for Linux 5.4.
There were no targets still actively using Linux 5.4.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 3a14580411adfb75f9a44eded9f41245b9e44606)

1 files changed, 0 insertions, 47 deletions

diff --git a/target/linux/bcm4908/patches-5.4/036-v5.18-0001-arm64-dts-broadcom-bcm4908-use-proper-TWD-binding.patch b/target/linux/bcm4908/patches-5.4/036-v5.18-0001-arm64-dts-broadcom-bcm4908-use-proper-TWD-binding.patch
deleted file mode 100644
index 420f790fdd..0000000000
--- a/target/linux/bcm4908/patches-5.4/036-v5.18-0001-arm64-dts-broadcom-bcm4908-use-proper-TWD-binding.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 33826e9c6ba76b265d4e26cb95493fa27ed78974 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 29 Dec 2021 11:23:14 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: use proper TWD binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Block at <ff800400 0x4c> is a TWD that contains timers, watchdog and
-reset. Actual timers happen to be at block beginning but they only span
-across the first 0x28 registers. It means the old block description was
-incorrect (size 0x3c).
-
-Drop timers binding for now and use documented TWD binding. Timers
-should be properly documented and defined as TWD subnode.
-
-Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -273,9 +273,9 @@
- 		#size-cells = <1>;
- 		ranges = <0x00 0x00 0xff800000 0x3000>;
- 
--		timer: timer@400 {
--			compatible = "brcm,bcm6328-timer", "syscon";
--			reg = <0x400 0x3c>;
-+		twd: timer-mfd@400 {
-+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
-+			reg = <0x400 0x4c>;
- 		};
- 
- 		gpio0: gpio-controller@500 {
-@@ -330,7 +330,7 @@
- 
- 	reboot {
- 		compatible = "syscon-reboot";
--		regmap = <&timer>;
-+		regmap = <&twd>;
- 		offset = <0x34>;
- 		mask = <1>;
- 	};