diff options
| author | Rafał Miłecki <rafal@milecki.pl> | 2020-03-10 15:46:49 +0100 |
|---|---|---|
| committer | Rafał Miłecki <rafal@milecki.pl> | 2020-03-10 15:50:55 +0100 |
| commit | d369d92fc7ed2970540235b27441f75a81ef171b (patch) | |
| tree | 248c5980fda5e8631c4c7b58a2bf55756e475b1d /target/linux/bcm47xx/patches-5.4/610-pci_ide_fix.patch | |
| parent | 5c98041d5a054bfe68070bbfa6fdeab63e6586fc (diff) | |
| download | upstream-d369d92fc7ed2970540235b27441f75a81ef171b.tar.gz upstream-d369d92fc7ed2970540235b27441f75a81ef171b.tar.bz2 upstream-d369d92fc7ed2970540235b27441f75a81ef171b.zip | |
bcm47xx: add support for kernel 5.4
Ethernet, switch, LEDs, buttons, USB, sysupgrade & LuCI were
successfully tested on BCM4706.
WARNING: Hack for BCM4710 adding BCM4710_PROTECTED_FILL_TLB() to the
local_r4k_flush_cache_sigtramp() could not be ported. That function has
been dropped in:
commit adcc81f148d7 ("MIPS: math-emu: Write-protect delay slot emulation pages")
commit 3315b6b336c8 ("MIPS: Delete unused flush_cache_sigtramp()")
it's unsure if that chipset will still work reliably.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Diffstat (limited to 'target/linux/bcm47xx/patches-5.4/610-pci_ide_fix.patch')
| -rw-r--r-- | target/linux/bcm47xx/patches-5.4/610-pci_ide_fix.patch | 41 |
1 files changed, 41 insertions, 0 deletions
diff --git a/target/linux/bcm47xx/patches-5.4/610-pci_ide_fix.patch b/target/linux/bcm47xx/patches-5.4/610-pci_ide_fix.patch new file mode 100644 index 0000000000..520828e8e5 --- /dev/null +++ b/target/linux/bcm47xx/patches-5.4/610-pci_ide_fix.patch @@ -0,0 +1,41 @@ +From: b.sander +Subject: [PATCH] pci: IDE fix + +These are standard probing messages when using pdc202xx_old: +pdc202xx_old 0000:00:01.0: IDE controller (0x105a:0x0d30 rev 0x02) +PCI: Enabling device 0000:00:01.0 (0004 -> 0007) +PCI: Fixing up device 0000:00:01.0 +0000:00:01.0: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode. +0000:00:01.0: FORCING BURST BIT 0x00->0x01 ACTIVE +pdc202xx_old 0000:00:01.0: 100% native mode on irq 6 + +With the default MAX_HWIFS value after above we get: + ide2: BM-DMA at 0x0400-0x0407 + ide3: BM-DMA at 0x0408-0x040f +Probing IDE interface ide2... +hde: CF500, CFA DISK drive + +As you can see it's ide2 + ide3 and hde. + +With this patch applied we get: + ide0: BM-DMA at 0x0400-0x0407 + ide1: BM-DMA at 0x0408-0x040f +Probing IDE interface ide0... +hda: CF500, CFA DISK drive + +This fixes OpenWrt ticket #7061: https://dev.openwrt.org/ticket/7061 +--- +--- a/include/linux/ide.h ++++ b/include/linux/ide.h +@@ -236,7 +236,11 @@ static inline void ide_std_init_ports(st + hw->io_ports.ctl_addr = ctl_addr; + } + ++#if defined CONFIG_BCM47XX ++# define MAX_HWIFS 2 ++#else + #define MAX_HWIFS 10 ++#endif + + /* + * Now for the data we need to maintain per-drive: ide_drive_t |