diff options
| author | Daniel González Cabanelas <dgcbueu@gmail.com> | 2023-06-13 22:45:53 +0200 |
|---|---|---|
| committer | Álvaro Fernández Rojas <noltari@gmail.com> | 2023-06-15 18:01:20 +0200 |
| commit | 40966d612efa6fb7909b9ae2140c2fd9d37f331e (patch) | |
| tree | d70a089d1e549377f83c4cf7fc2ed73ea26332bd /target/linux/bcm47xx/patches-5.15 | |
| parent | e6acfe03dd0c5afdfeeff2826ebb2258b43fe8d9 (diff) | |
| download | upstream-40966d612efa6fb7909b9ae2140c2fd9d37f331e.tar.gz upstream-40966d612efa6fb7909b9ae2140c2fd9d37f331e.tar.bz2 upstream-40966d612efa6fb7909b9ae2140c2fd9d37f331e.zip | |
bmips: add support for Actiontec R1000H
The Actiontec R1000H is a gigabit wifi router, 2.4 GHz single band with
two external antennas. It comes with a coaxial HomePNA port.
Hardware:
- SoC: Broadcom BCM6368
- CPU: dual core BMIPS4350 V3.1 @400Mhz
- RAM: 64 MB DDR
- Flash: 32 MB parallel NOR
- LAN switch: Broadcom BCM53115, 5x 1Gbit
- LAN coaxial : 1x HPNA 3.1, CG3211 + CG3213
- Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn
- USB: 1x 2.0
- Buttons: 2x, 1 reset
- LEDs: 7x
- UART: yes
The HPNA hardware probably needs a firmware to make the coaxial port work.
In the OEM firmware, it's apparently sent with an utility (inhpna) through
the ethernet port.
Installation via CFE web UI:
1. Connect the UART serial port.
2. Power on the router and press enter at the console prompt to stop the
bootloader.
4. Browse to http://192.168.1.1 and upload the OpenWrt CFE firmware
5. Wait a few minutes for it to finish
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
(cherry picked from commit e1a55de7a7eafd40a4fab5f29153a1a3c3606818)
Diffstat (limited to 'target/linux/bcm47xx/patches-5.15')
0 files changed, 0 insertions, 0 deletions