diff options
| author | Daniel González Cabanelas <dgcbueu@gmail.com> | 2023-06-10 21:05:33 +0200 |
|---|---|---|
| committer | Álvaro Fernández Rojas <noltari@gmail.com> | 2023-06-11 09:58:17 +0200 |
| commit | 13579e64417545dca6bc878927d9f48f3dfe4af9 (patch) | |
| tree | 6cc8d774588e9b4e16703285da51fc65e21dd2b8 /target/linux/bcm47xx/modules.mk | |
| parent | df34f71be4aeb849461997f6de70124cfe778604 (diff) | |
| download | upstream-13579e64417545dca6bc878927d9f48f3dfe4af9.tar.gz upstream-13579e64417545dca6bc878927d9f48f3dfe4af9.tar.bz2 upstream-13579e64417545dca6bc878927d9f48f3dfe4af9.zip | |
bmips: add support for Netgear EVG2000
The Netgear EVG2000 is a wifi gigabit router, 2.4 GHz single band with
two internal antennas integrated in the main PCB.
Hardware:
- SoC: Broadcom BCM6369
- CPU: dual core BMIPS4350 V3.1 @400Mhz
- RAM: 64 MB DDR
- Flash: 16 MB parallel NOR
- LAN switch: Broadcom BCM53115, 5x 1Gbit
- Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn
- USB: 2x 2.0
- Buttons: 2x, 1 reset
- LEDs: 10x
- FXS: 2x
- UART: yes
Installation via CFE web UI:
1. Power off the router and make a temporal TX-RX shortcircuit on the
serial pins.
2. Power on the router and wait 3 or more seconds
3. Remove the TX-RX shortcircuit
4. Browse to http://192.168.1.1 or http://192.168.0.1 and upload the
firmware
5. Wait a few minutes for it to finish
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Diffstat (limited to 'target/linux/bcm47xx/modules.mk')
0 files changed, 0 insertions, 0 deletions