brcm47xx: rename target to bcm47xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 206 insertions, 0 deletions

diff --git a/target/linux/bcm47xx/base-files/etc/board.d/01_network b/target/linux/bcm47xx/base-files/etc/board.d/01_network
new file mode 100755
index 0000000000..e6311d8139
--- /dev/null
+++ b/target/linux/bcm47xx/base-files/etc/board.d/01_network
@@ -0,0 +1,206 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2015 OpenWrt.org
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+configure_by_vlanports() {
+	local vlan0ports="$(nvram get vlan0ports)"
+	local vlan1ports="$(nvram get vlan1ports)"
+	local vlan2ports="$(nvram get vlan2ports)"
+	local cpuport="$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")"
+
+	if [ "${vlan0ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
+	   [ "${vlan1ports:0:9}" = "0 1 2 3 8" -a "${vlan2ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
+	   [ "${vlan2ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ];
+	then
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
+
+	elif [ "${vlan0ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
+	     [ "${vlan1ports:0:9}" = "1 2 3 4 8" -a "${vlan2ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
+	     [ "${vlan2ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ];
+	then
+		ucidef_add_switch "switch0" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "8@eth0"
+
+	elif [ "${vlan0ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
+		 [ "${vlan1ports:0:9}" = "0 1 2 3 5" -a "${vlan2ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
+		 [ "${vlan2ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ];
+	then
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+
+	elif [ "${vlan0ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
+	     [ "${vlan1ports:0:9}" = "1 2 3 4 5" -a "${vlan2ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
+	     [ "${vlan2ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ];
+	then
+		ucidef_add_switch "switch0" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
+
+	else
+		logger -t "01_network" "Unable to determine network configuration"
+		ucidef_set_interface_lan "eth0"
+	fi
+}
+
+configure_by_boardnum() {
+	local boardnum="$1"
+
+	case "$boardnum" in
+	# WAP54G, Sitecom WL-105b
+	"2" | \
+	"1024")
+		ucidef_set_interface_lan "eth0"
+		;;
+
+	# Generic detection fallback
+	*)
+		configure_by_vlanports
+		;;
+	esac
+}
+
+configure_by_boardtype() {
+	local boardtype="$1"
+	local boardnum="$2"
+
+	case "$boardtype" in
+	"bcm94710r4")
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		;;
+
+	"0x0467")
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+		;;
+
+	"0x042f" | \
+	"0x0472")
+		# WL-500gP
+		if [ "$boardnum" = "45" ]; then
+			ucidef_add_switch "switch0" \
+				"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+
+		# Generic BCM94704
+		else
+			ucidef_set_interface_wan "eth1"
+			ucidef_add_switch "switch0" \
+				"0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+
+			# MAC addresses on 4704 tend to be screwed up. Add a workaround here
+			local mac="$(nvram get et0macaddr)"
+			local pat="[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+				  pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+				  pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+
+			case "$mac" in
+			$pat)
+				ucidef_set_interface_macaddr "lan" "$mac"
+				ucidef_set_interface_macaddr "wan" "$(macaddr_add "$mac" 1)"
+				;;
+			esac
+		fi
+		;;
+
+	# Buffalo WBR-B11 and Buffalo WBR-G54
+	"bcm94710ap")
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+		;;
+
+	*)
+		configure_by_boardnum "$boardnum"
+		;;
+	esac
+}
+
+configure_by_model() {
+	local model="$1"
+	local boardtype="$2"
+	local boardnum="$3"
+
+	# Netgear WGT634U exception
+	if grep -sqE 'mtd0: 000(6|a)0000' /proc/mtd; then
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+		return
+	fi
+
+	case "$model" in
+	"Asus WLHDD" | \
+	"Asus WL300G")
+		ucidef_set_interface_lan "eth1"
+		;;
+
+	"Asus WL330GE")
+		ucidef_add_switch "switch0" "4:lan" "5t@eth0"
+		;;
+
+	"Asus WL500G" | \
+	"Microsoft MN-700")
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		;;
+
+	"Asus WL500GP V2")
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "5@eth0"
+		;;
+
+	"Asus RT-N12"* | \
+	"Buffalo WHR-G125" | \
+	"D-Link DIR-330" | \
+	"Motorola WR850G" | \
+	"Siemens SE505 V2")
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+		;;
+
+	"Asus WL700")
+		ucidef_add_switch "switch0" \
+			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+		;;
+
+	"Asus WL500W" | \
+	"Dell TrueMobile 2300")
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
+		;;
+
+	"Asus RT-N16"* | \
+	"Linksys E3000 V1" | \
+	"Netgear WNR3500 V2" | \
+	"Netgear WNR3500L")
+		ucidef_add_switch "switch0" \
+			"0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "8@eth0"
+		;;
+
+	"Netgear WN2500RP V1")
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0"
+		;;
+
+	*)
+		configure_by_boardtype "$boardtype" "$boardnum"
+		;;
+	esac
+}
+
+
+model="$(cat /tmp/sysinfo/model)"
+boardtype="$(board_name)"
+
+case "$boardtype" in
+	*:*)
+		boardnum="${boardtype##*:}"
+		boardtype="${boardtype%:*}"
+	;;
+esac
+
+board_config_update
+
+configure_by_model "$model" "$boardtype" "$boardnum"
+
+board_config_flush