bcm27xx: remove obsolete kernel 5.4

With the upgrade to kernel 5.10 per default the old version is no
longer required to be in tree.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 50 deletions

diff --git a/target/linux/bcm27xx/patches-5.4/950-0914-dt-dtoverlays-imx477-Add-parameter-to-set-camera-mod.patch b/target/linux/bcm27xx/patches-5.4/950-0914-dt-dtoverlays-imx477-Add-parameter-to-set-camera-mod.patch
deleted file mode 100644
index 11a5d3da98..0000000000
--- a/target/linux/bcm27xx/patches-5.4/950-0914-dt-dtoverlays-imx477-Add-parameter-to-set-camera-mod.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From afed51afadb2f5d43e093c969bdf6535b2ea0ad3 Mon Sep 17 00:00:00 2001
-From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-Date: Sat, 4 Jul 2020 03:04:38 +0300
-Subject: [PATCH] dt/dtoverlays: imx477: Add parameter to set camera
- module rotation
-
-Add a rotation DT overlay parameter to allow specifying the camera
-module mounting rotation. Set the default rotation to 180 as the module
-is typically mounted upside-down.
-
-Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
----
- arch/arm/boot/dts/overlays/README             | 5 +++--
- arch/arm/boot/dts/overlays/imx477-overlay.dts | 6 ++++++
- 2 files changed, 9 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -1458,8 +1458,9 @@ Name:   imx477
- Info:   Sony IMX477 camera module.
-         Uses Unicam 1, which is the standard camera connector on most Pi
-         variants.
--Load:   dtoverlay=imx477
--Params: <None>
-+Load:   dtoverlay=imx477,<param>=<val>
-+Params: rotation                Mounting rotation of the camera sensor (0 or
-+                                180, default 180)
- 
- 
- Name:   iqaudio-codec
---- a/arch/arm/boot/dts/overlays/imx477-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/imx477-overlay.dts
-@@ -27,6 +27,8 @@
- 				VDIG-supply = <&imx477_vdig>;	/* 1.05v */
- 				VDDL-supply = <&imx477_vddl>;	/* 1.8v */
- 
-+				rotation = <180>;
-+
- 				port {
- 					imx477_0: endpoint {
- 						remote-endpoint = <&csi1_ep>;
-@@ -110,4 +112,8 @@
- 			cam0-pwdn      = <&imx477_vana>,"gpio:4";
- 		};
- 	};
-+
-+	__overrides__ {
-+		rotation = <&imx477>,"rotation:0";
-+	};
- };