bcm27xx: import latest patches from the RPi foundation

bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G
bcm2710: boot tested on RPi 3B v1.2
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 104 deletions

diff --git a/target/linux/bcm27xx/patches-5.4/950-0221-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch b/target/linux/bcm27xx/patches-5.4/950-0221-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch
deleted file mode 100644
index 127e91cd24..0000000000
--- a/target/linux/bcm27xx/patches-5.4/950-0221-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From 2669f337d78306667e4243fda9282fb8c07d0d3d Mon Sep 17 00:00:00 2001
-From: Jonathan Bell <jonathan@raspberrypi.org>
-Date: Tue, 11 Jun 2019 10:55:00 +0100
-Subject: [PATCH] usb: add plumbing for updating interrupt endpoint
- interval state
-
-xHCI caches device and endpoint data after the interface is configured,
-so an explicit command needs to be issued for any device driver wanting
-to alter the polling interval of an endpoint.
-
-Add usb_fixup_endpoint() to allow drivers to do this. The fixup must be
-called after calculating endpoint bandwidth requirements but before any
-URBs are submitted.
-
-If polling intervals are shortened, any bandwidth reservations are no
-longer valid but in practice polling intervals are only ever relaxed.
-
-Limit the scope to interrupt transfers for now.
-
-Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
----
- drivers/usb/core/hcd.c     | 10 ++++++++++
- drivers/usb/core/message.c | 15 +++++++++++++++
- include/linux/usb.h        |  2 ++
- include/linux/usb/hcd.h    |  7 +++++++
- 4 files changed, 34 insertions(+)
-
---- a/drivers/usb/core/hcd.c
-+++ b/drivers/usb/core/hcd.c
-@@ -1941,6 +1941,16 @@ reset:
- 	return ret;
- }
- 
-+void usb_hcd_fixup_endpoint(struct usb_device *udev,
-+			    struct usb_host_endpoint *ep, int interval)
-+{
-+	struct usb_hcd *hcd;
-+
-+	hcd = bus_to_hcd(udev->bus);
-+	if (hcd->driver->fixup_endpoint)
-+		hcd->driver->fixup_endpoint(hcd, udev, ep, interval);
-+}
-+
- /* Disables the endpoint: synchronizes with the hcd to make sure all
-  * endpoint state is gone from hardware.  usb_hcd_flush_endpoint() must
-  * have been called previously.  Use for set_configuration, set_interface,
---- a/drivers/usb/core/message.c
-+++ b/drivers/usb/core/message.c
-@@ -1120,6 +1120,21 @@ static void remove_intf_ep_devs(struct u
- 	intf->ep_devs_created = 0;
- }
- 
-+void usb_fixup_endpoint(struct usb_device *dev, int epaddr, int interval)
-+{
-+	unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
-+	struct usb_host_endpoint *ep;
-+
-+	if (usb_endpoint_out(epaddr))
-+		ep = dev->ep_out[epnum];
-+	else
-+		ep = dev->ep_in[epnum];
-+
-+	if (ep && usb_endpoint_xfer_int(&ep->desc))
-+		usb_hcd_fixup_endpoint(dev, ep, interval);
-+}
-+EXPORT_SYMBOL_GPL(usb_fixup_endpoint);
-+
- /**
-  * usb_disable_endpoint -- Disable an endpoint by address
-  * @dev: the device whose endpoint is being disabled
---- a/include/linux/usb.h
-+++ b/include/linux/usb.h
-@@ -1816,6 +1816,8 @@ extern int usb_clear_halt(struct usb_dev
- extern int usb_reset_configuration(struct usb_device *dev);
- extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
- extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
-+extern void usb_fixup_endpoint(struct usb_device *dev, int epaddr,
-+			       int interval);
- 
- /* this request isn't really synchronous, but it belongs with the others */
- extern int usb_driver_set_configuration(struct usb_device *udev, int config);
---- a/include/linux/usb/hcd.h
-+++ b/include/linux/usb/hcd.h
-@@ -382,6 +382,11 @@ struct hc_driver {
- 		 * or bandwidth constraints.
- 		 */
- 	void	(*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
-+		/* Override the endpoint-derived interval
-+		 * (if there is any cached hardware state).
-+		 */
-+	void	(*fixup_endpoint)(struct usb_hcd *hcd, struct usb_device *udev,
-+				  struct usb_host_endpoint *ep, int interval);
- 		/* Returns the hardware-chosen device address */
- 	int	(*address_device)(struct usb_hcd *, struct usb_device *udev);
- 		/* prepares the hardware to send commands to the device */
-@@ -443,6 +448,8 @@ extern void usb_hcd_unmap_urb_setup_for_
- extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
- extern void usb_hcd_flush_endpoint(struct usb_device *udev,
- 		struct usb_host_endpoint *ep);
-+extern void usb_hcd_fixup_endpoint(struct usb_device *udev,
-+		struct usb_host_endpoint *ep, int interval);
- extern void usb_hcd_disable_endpoint(struct usb_device *udev,
- 		struct usb_host_endpoint *ep);
- extern void usb_hcd_reset_endpoint(struct usb_device *udev,