bcm27xx: add linux 5.4 support

Tested on bcm2710 (Raspberry Pi 3B).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 27 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-5.4/950-0202-w1-w1-gpio-Make-GPIO-an-output-for-strong-pullup.patch b/target/linux/bcm27xx/patches-5.4/950-0202-w1-w1-gpio-Make-GPIO-an-output-for-strong-pullup.patch
new file mode 100644
index 0000000000..c8d656a1cf
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.4/950-0202-w1-w1-gpio-Make-GPIO-an-output-for-strong-pullup.patch
@@ -0,0 +1,27 @@
+From db2d840e64afb069ae3debab013610cce05ac099 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Wed, 12 Jun 2019 17:15:05 +0100
+Subject: [PATCH] w1: w1-gpio: Make GPIO an output for strong pullup
+
+The logic to drive the data line high to implement a strong pullup
+assumed that the pin was already an output - setting a value does
+not change an input.
+
+See: https://github.com/raspberrypi/firmware/issues/1143
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ drivers/w1/masters/w1-gpio.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/w1/masters/w1-gpio.c
++++ b/drivers/w1/masters/w1-gpio.c
+@@ -30,7 +30,7 @@ static u8 w1_gpio_set_pullup(void *data,
+ 			 * This will OVERRIDE open drain emulation and force-pull
+ 			 * the line high for some time.
+ 			 */
+-			gpiod_set_raw_value(pdata->gpiod, 1);
++			gpiod_direction_output_raw(pdata->gpiod, 1);
+ 			msleep(pdata->pullup_duration);
+ 			/*
+ 			 * This will simply set the line as input since we are doing