kernel: bump 5.4 to 5.4.179

Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between
5.4.171 and 5.4.179.
The following 3 patches do not apply any more:
* target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
  This was already integrated in kernel v5.4-rc1, it was never needed.

* target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
* target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
I think these were done to fix the problem which was really fixed in
commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio
hogs") from v5.4.175

target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
Move fwnode_device_is_available to the same position as in kernel 5.10.

target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts:
ls1028a-qds: move rtc node to the correct i2c bus")

Compile-tested: lantiq/xrx200, bcm27xx/bcm2710
Run-tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 7 insertions, 7 deletions

diff --git a/target/linux/bcm27xx/patches-5.4/950-0021-clk-bcm2835-Add-claim-clocks-property.patch b/target/linux/bcm27xx/patches-5.4/950-0021-clk-bcm2835-Add-claim-clocks-property.patch
index 7479210c1a..b732c4f167 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0021-clk-bcm2835-Add-claim-clocks-property.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0021-clk-bcm2835-Add-claim-clocks-property.patch
@@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1311,6 +1311,8 @@ static const struct clk_ops bcm2835_vpu_
+@@ -1306,6 +1306,8 @@ static const struct clk_ops bcm2835_vpu_
  	.debug_init = bcm2835_clock_debug_init,
  };
  
@@ -26,7 +26,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
  					   const struct bcm2835_pll_data *data)
  {
-@@ -1327,6 +1329,9 @@ static struct clk_hw *bcm2835_register_p
+@@ -1322,6 +1324,9 @@ static struct clk_hw *bcm2835_register_p
  	init.ops = &bcm2835_pll_clk_ops;
  	init.flags = CLK_IGNORE_UNUSED;
  
@@ -36,7 +36,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
  	if (!pll)
  		return NULL;
-@@ -1382,8 +1387,10 @@ bcm2835_register_pll_divider(struct bcm2
+@@ -1377,8 +1382,10 @@ bcm2835_register_pll_divider(struct bcm2
  	divider->div.table = NULL;
  
  	if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) {
@@ -49,7 +49,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	}
  
  	divider->cprman = cprman;
-@@ -2191,6 +2198,8 @@ static const struct bcm2835_clk_desc clk
+@@ -2186,6 +2193,8 @@ static const struct bcm2835_clk_desc clk
  		.ctl_reg = CM_PERIICTL),
  };
  
@@ -58,7 +58,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  /*
   * Permanently take a reference on the parent of the SDRAM clock.
   *
-@@ -2210,6 +2219,19 @@ static int bcm2835_mark_sdc_parent_criti
+@@ -2205,6 +2214,19 @@ static int bcm2835_mark_sdc_parent_criti
  	return clk_prepare_enable(parent);
  }
  
@@ -78,7 +78,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static int bcm2835_clk_probe(struct platform_device *pdev)
  {
  	struct device *dev = &pdev->dev;
-@@ -2220,6 +2242,7 @@ static int bcm2835_clk_probe(struct plat
+@@ -2215,6 +2237,7 @@ static int bcm2835_clk_probe(struct plat
  	const size_t asize = ARRAY_SIZE(clk_desc_array);
  	const struct cprman_plat_data *pdata;
  	size_t i;
@@ -86,7 +86,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	int ret;
  
  	pdata = of_device_get_match_data(&pdev->dev);
-@@ -2239,6 +2262,13 @@ static int bcm2835_clk_probe(struct plat
+@@ -2234,6 +2257,13 @@ static int bcm2835_clk_probe(struct plat
  	if (IS_ERR(cprman->regs))
  		return PTR_ERR(cprman->regs);