kernel: bump 5.15 to 5.15.62

Deleted following upstreamed patches:

 bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch
 bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch
 bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
 bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch
 bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
 bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch
 bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch
 bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch
 bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch
 bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch
 bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch
 bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch
 bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch
 bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch
 bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch

 bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch

 mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch

Manually rebased following patches:

 bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch
 bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch
 bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch
 bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch
 bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch
 bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch
 bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch

Runtime tested on turris-omnia and glinet-b1300.

Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200]
Signed-off-by: Petr Štetiar <ynezz@true.cz>

1 files changed, 14 insertions, 34 deletions

diff --git a/target/linux/bcm27xx/patches-5.15/950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch b/target/linux/bcm27xx/patches-5.15/950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch
index 0d14eeccd4..df4aece95e 100644
--- a/target/linux/bcm27xx/patches-5.15/950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch
+++ b/target/linux/bcm27xx/patches-5.15/950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch
@@ -32,45 +32,25 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
  			break;
  	}
  
-@@ -1667,7 +1667,7 @@ static int vc4_dsi_bind(struct device *d
+@@ -1687,9 +1687,9 @@ static int vc4_dsi_bind(struct device *d
+ 		return ret;
  	}
  
- 	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
--					  &panel, &dsi->bridge);
-+					  &panel, &dsi->out_bridge);
- 	if (ret) {
- 		/* If the bridge or panel pointed by dev->of_node is not
- 		 * enabled, just return 0 here so that we don't prevent the DRM
-@@ -1682,10 +1682,10 @@ static int vc4_dsi_bind(struct device *d
- 	}
+-	dsi->bridge = devm_drm_of_get_bridge(dev, dev->of_node, 0, 0);
+-	if (IS_ERR(dsi->bridge))
+-		return PTR_ERR(dsi->bridge);
++	dsi->out_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 0, 0);
++	if (IS_ERR(dsi->out_bridge))
++		return PTR_ERR(dsi->out_bridge);
  
- 	if (panel) {
--		dsi->bridge = devm_drm_panel_bridge_add_typed(dev, panel,
--							      DRM_MODE_CONNECTOR_DSI);
--		if (IS_ERR(dsi->bridge)) {
--			ret = PTR_ERR(dsi->bridge);
-+		dsi->out_bridge = devm_drm_panel_bridge_add_typed(dev, panel,
-+								  DRM_MODE_CONNECTOR_DSI);
-+		if (IS_ERR(dsi->out_bridge)) {
-+			ret = PTR_ERR(dsi->out_bridge);
- 			goto err_free_dma;
- 		}
- 	}
-@@ -1704,7 +1704,7 @@ static int vc4_dsi_bind(struct device *d
+ 	/* The esc clock rate is supposed to always be 100Mhz. */
+ 	ret = clk_set_rate(dsi->escape_clock, 100 * 1000000);
+@@ -1705,7 +1705,7 @@ static int vc4_dsi_bind(struct device *d
  	drm_simple_encoder_init(drm, dsi->encoder, DRM_MODE_ENCODER_DSI);
  	drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs);
  
 -	ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL, 0);
 +	ret = drm_bridge_attach(dsi->encoder, dsi->out_bridge, NULL, 0);
- 	if (ret) {
- 		dev_err(dev, "bridge attach failed: %d\n", ret);
- 		goto err_free_dma;
-@@ -1741,7 +1741,7 @@ static void vc4_dsi_unbind(struct device
- {
- 	struct vc4_dsi *dsi = dev_get_drvdata(dev);
- 
--	if (dsi->bridge)
-+	if (dsi->out_bridge)
- 		pm_runtime_disable(dev);
- 
- 	/*
+ 	if (ret)
+ 		return ret;
+ 	/* Disable the atomic helper calls into the bridge.  We