bcm27xx: add support for linux v5.15

Build system: x86_64
Build-tested: bcm2708, bcm2709, bcm2710, bcm2711
Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B

Signed-off-by: Marty Jones <mj8263788@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 206 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-5.15/950-0515-overlays-Add-generic-mcp2515-overlay.patch b/target/linux/bcm27xx/patches-5.15/950-0515-overlays-Add-generic-mcp2515-overlay.patch
new file mode 100644
index 0000000000..15feadbe65
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.15/950-0515-overlays-Add-generic-mcp2515-overlay.patch
@@ -0,0 +1,206 @@
+From 637535797f538a24a0ce2225185b24b14aa20d51 Mon Sep 17 00:00:00 2001
+From: GabyPCgeeK <GabyPCgeeK@users.noreply.github.com>
+Date: Mon, 27 Sep 2021 04:43:21 -0400
+Subject: [PATCH] overlays: Add generic mcp2515 overlay
+
+Can configure mcp2515 on spi0/1/2 without the need for multiple overlays.
+---
+ arch/arm/boot/dts/overlays/Makefile           |   1 +
+ arch/arm/boot/dts/overlays/README             |  15 ++
+ .../arm/boot/dts/overlays/mcp2515-overlay.dts | 156 ++++++++++++++++++
+ 3 files changed, 172 insertions(+)
+ create mode 100644 arch/arm/boot/dts/overlays/mcp2515-overlay.dts
+
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -113,6 +113,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ 	mbed-dac.dtbo \
+ 	mcp23017.dtbo \
+ 	mcp23s17.dtbo \
++	mcp2515.dtbo \
+ 	mcp2515-can0.dtbo \
+ 	mcp2515-can1.dtbo \
+ 	mcp251xfd.dtbo \
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -1977,6 +1977,21 @@ Params: s08-spi<n>-<m>-present  4-bit in
+                                 or INTB output of MCP23S17 is connected.
+ 
+ 
++Name:   mcp2515
++Info:   Configures the MCP2515 CAN controller on spi0/1/2
++        For devices on spi1 or spi2, the interfaces should be enabled
++        with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays.
++Load:   dtoverlay=mcp2515,<param>=<val>
++Params: spi<n>-<m>              Configure device at spi<n>, cs<m>
++                                (boolean, required)
++
++        oscillator              Clock frequency for the CAN controller (Hz)
++
++        speed                   Maximum SPI frequence (Hz)
++
++        interrupt               GPIO for interrupt signal
++
++
+ Name:   mcp2515-can0
+ Info:   Configures the MCP2515 CAN controller on spi0.0
+ Load:   dtoverlay=mcp2515-can0,<param>=<val>
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/mcp2515-overlay.dts
+@@ -0,0 +1,156 @@
++// SPDX-License-Identifier: (GPL-2.0 OR MIT)
++
++/dts-v1/;
++/plugin/;
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/pinctrl/bcm2835.h>
++
++/ {
++	compatible = "brcm,bcm2835";
++
++	fragment@0 {
++		target = <&spidev0>;
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@1 {
++		target = <&spidev1>;
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@2 {
++		target-path = "spi1/spidev@0";
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@3 {
++		target-path = "spi1/spidev@1";
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@4 {
++		target-path = "spi1/spidev@2";
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@5 {
++		target-path = "spi2/spidev@0";
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@6 {
++		target-path = "spi2/spidev@1";
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@7 {
++		target-path = "spi2/spidev@2";
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@8 {
++		target = <&gpio>;
++		__overlay__ {
++			mcp2515_pins: mcp2515_pins {
++				brcm,pins = <25>;
++				brcm,function = <BCM2835_FSEL_GPIO_IN>;
++			};
++		};
++	};
++
++	fragment@9 {
++		target-path = "/clocks";
++		__overlay__ {
++			clk_mcp2515_osc: mcp2515-osc {
++				#clock-cells = <0>;
++				compatible = "fixed-clock";
++				clock-frequency = <16000000>;
++			};
++		};
++	};
++
++	mcp2515_frag: fragment@10 {
++		target = <&spi0>;
++		__overlay__ {
++			status = "okay";
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			mcp2515: mcp2515@0 {
++				compatible = "microchip,mcp2515";
++				reg = <0>;
++				pinctrl-names = "default";
++				pinctrl-0 = <&mcp2515_pins>;
++				spi-max-frequency = <10000000>;
++				interrupt-parent = <&gpio>;
++				interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
++				clocks = <&clk_mcp2515_osc>;
++			};
++		};
++	};
++
++	__overrides__ {
++		spi0-0 = <0>, "+0",
++			<&mcp2515_frag>, "target:0=", <&spi0>,
++			<&mcp2515>, "reg:0=0",
++			<&mcp2515_pins>, "name=mcp2515_spi0_0_pins",
++			<&clk_mcp2515_osc>, "name=mcp2515-spi0-0-osc";
++		spi0-1 = <0>, "+1",
++			<&mcp2515_frag>, "target:0=", <&spi0>,
++			<&mcp2515>, "reg:0=1",
++			<&mcp2515_pins>, "name=mcp2515_spi0_1_pins",
++			<&clk_mcp2515_osc>, "name=mcp2515-spi0-1-osc";
++		spi1-0 = <0>, "+2",
++			<&mcp2515_frag>, "target:0=", <&spi1>,
++			<&mcp2515>, "reg:0=0",
++			<&mcp2515_pins>, "name=mcp2515_spi1_0_pins",
++			<&clk_mcp2515_osc>, "name=mcp2515-spi1-0-osc";
++		spi1-1 = <0>, "+3",
++			<&mcp2515_frag>, "target:0=", <&spi1>,
++			<&mcp2515>, "reg:0=1",
++			<&mcp2515_pins>, "name=mcp2515_spi1_1_pins",
++			<&clk_mcp2515_osc>, "name=mcp2515-spi1-1-osc";
++		spi1-2 = <0>, "+4",
++			<&mcp2515_frag>, "target:0=", <&spi1>,
++			<&mcp2515>, "reg:0=2",
++			<&mcp2515_pins>, "name=mcp2515_spi1_2_pins",
++			<&clk_mcp2515_osc>, "name=mcp2515-spi1-2-osc";
++		spi2-0 = <0>, "+5",
++			<&mcp2515_frag>, "target:0=", <&spi2>,
++			<&mcp2515>, "reg:0=0",
++			<&mcp2515_pins>, "name=mcp2515_spi2_0_pins",
++			<&clk_mcp2515_osc>, "name=mcp2515-spi2-0-osc";
++		spi2-1 = <0>, "+6",
++			<&mcp2515_frag>, "target:0=", <&spi2>,
++			<&mcp2515>, "reg:0=1",
++			<&mcp2515_pins>, "name=mcp2515_spi2_1_pins",
++			<&clk_mcp2515_osc>, "name=mcp2515-spi2-1-osc";
++		spi2-2 = <0>, "+7",
++			<&mcp2515_frag>, "target:0=", <&spi2>,
++			<&mcp2515>, "reg:0=2",
++			<&mcp2515_pins>, "name=mcp2515_spi2_2_pins",
++			<&clk_mcp2515_osc>, "name=mcp2515-spi2-2-osc";
++		oscillator = <&clk_mcp2515_osc>, "clock-frequency:0";
++		speed = <&mcp2515>, "spi-max-frequency:0";
++		interrupt = <&mcp2515_pins>, "brcm,pins:0",
++			<&mcp2515>, "interrupts:0";
++	};
++};