diff options
| author | Petr Štetiar <ynezz@true.cz> | 2022-08-22 14:02:36 +0200 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2022-08-23 10:37:04 +0200 |
| commit | ca5c695a4522091234026e22e8336f05d65602ba (patch) | |
| tree | 7ea3f3abfa9a15e8fee51408918a6a0671062409 /target/linux/bcm27xx/patches-5.15/950-0151-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch | |
| parent | d1163fd13f6498826d202f0b58cedf32d7891d52 (diff) | |
| download | upstream-ca5c695a4522091234026e22e8336f05d65602ba.tar.gz upstream-ca5c695a4522091234026e22e8336f05d65602ba.tar.bz2 upstream-ca5c695a4522091234026e22e8336f05d65602ba.zip | |
kernel: bump 5.15 to 5.15.62
Deleted following upstreamed patches:
bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch
bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch
bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch
bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch
bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch
bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch
bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch
bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch
bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch
bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch
bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch
bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch
bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch
bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch
mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch
Manually rebased following patches:
bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch
bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch
bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch
bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch
bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch
bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch
bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch
Runtime tested on turris-omnia and glinet-b1300.
Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/bcm27xx/patches-5.15/950-0151-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch')
| -rw-r--r-- | target/linux/bcm27xx/patches-5.15/950-0151-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/target/linux/bcm27xx/patches-5.15/950-0151-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch b/target/linux/bcm27xx/patches-5.15/950-0151-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch index 6b931a3e2f..44fd3256ff 100644 --- a/target/linux/bcm27xx/patches-5.15/950-0151-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch +++ b/target/linux/bcm27xx/patches-5.15/950-0151-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch @@ -27,7 +27,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org> --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c -@@ -1969,6 +1969,16 @@ reset: +@@ -1972,6 +1972,16 @@ reset: return ret; } @@ -81,7 +81,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org> extern int usb_driver_set_configuration(struct usb_device *udev, int config); --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h -@@ -384,6 +384,11 @@ struct hc_driver { +@@ -385,6 +385,11 @@ struct hc_driver { * or bandwidth constraints. */ void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); @@ -93,7 +93,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org> /* Returns the hardware-chosen device address */ int (*address_device)(struct usb_hcd *, struct usb_device *udev); /* prepares the hardware to send commands to the device */ -@@ -448,6 +453,8 @@ extern void usb_hcd_unmap_urb_setup_for_ +@@ -449,6 +454,8 @@ extern void usb_hcd_unmap_urb_setup_for_ extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *); extern void usb_hcd_flush_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); |