diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2022-02-05 19:09:11 +0900 |
|---|---|---|
| committer | Sungbo Eo <mans0n@gorani.run> | 2022-02-11 22:30:04 +0900 |
| commit | 337e942290fa6a18e0289ae32420c5c402aead1a (patch) | |
| tree | 6bd1fbe6812173988bbad5ee4bb0c22e3232f371 /target/linux/bcm27xx/patches-5.10/950-0593-overlays-Add-ugreen-dabboard-overlay.patch | |
| parent | 34a373c0df0233150b5c87e9c925ca2b2b754a6e (diff) | |
| download | upstream-337e942290fa6a18e0289ae32420c5c402aead1a.tar.gz upstream-337e942290fa6a18e0289ae32420c5c402aead1a.tar.bz2 upstream-337e942290fa6a18e0289ae32420c5c402aead1a.zip | |
ramips: add support for ELECOM WRC-2533GS2
ELECOM WRC-2533GS2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on
MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 128 MiB (NT5CC64M16GP-DI)
- Flash : SPI-NOR 16 MiB (MX25L12835FM2I-10G)
- WLAN : 2.4/5GHz 4T4R (2x MediaTek MT7615)
- Ethernet : 10/100/1000 Mbps x5
- Switch : MediaTek MT7530 (SoC)
- LEDs/Keys : 4x/6x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J4: 3.3V, GND, TX, RX from ethernet port side
- 57600n8
- Power : 12 VDC, 1.5 A
Flash instruction using factory image:
1. Boot WRC-2533GS2 normally with "Router" mode
2. Access to "http://192.168.2.1/" and open firmware update page
("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing
MAC Addresses:
LAN : 04:AB:18:xx:xx:FB (Factory, 0xFFF4 (hex))
WAN : 04:AB:18:xx:xx:FC (Factory, 0xFFFA (hex))
2.4 GHz : 04:AB:18:xx:xx:FD (Factory, 0x4 (hex))
5 GHz : 04:AB:18:xx:xx:FE (Factory, 0x8004 (hex))
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/bcm27xx/patches-5.10/950-0593-overlays-Add-ugreen-dabboard-overlay.patch')
0 files changed, 0 insertions, 0 deletions