kernel: Refresh on 5.10.138

Refresh all patches on top of kernel 5.10.138.

The following patches were applied upstream:
 bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch
 bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch
 bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
 bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch
 bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch
 bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch
 bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
 bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch
 bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch
 bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch
 bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch
 bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch
 bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch
 bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch
 bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch
 bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch

Upstream sets the pixel clock to 340MHz now, do not set it to 600MHz any more.
 bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch

Fixes: 89956c653252 ("kernel: bump 5.10 to 5.10.138")
Fixes: 4209c33ae27d ("kernel: bump 5.10 to 5.10.137")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 3 insertions, 3 deletions

diff --git a/target/linux/bcm27xx/patches-5.10/950-0575-drm-vc4-hdmi-Enable-the-scrambler.patch b/target/linux/bcm27xx/patches-5.10/950-0575-drm-vc4-hdmi-Enable-the-scrambler.patch
index d4efa11c40..557f9db3b9 100644
--- a/target/linux/bcm27xx/patches-5.10/950-0575-drm-vc4-hdmi-Enable-the-scrambler.patch
+++ b/target/linux/bcm27xx/patches-5.10/950-0575-drm-vc4-hdmi-Enable-the-scrambler.patch
@@ -32,7 +32,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech>
  #define VC5_HDMI_DEEP_COLOR_CONFIG_1_INIT_PACK_PHASE_SHIFT	8
  #define VC5_HDMI_DEEP_COLOR_CONFIG_1_INIT_PACK_PHASE_MASK	VC4_MASK(10, 8)
  
-@@ -518,6 +521,64 @@ static void vc4_hdmi_set_infoframes(stru
+@@ -520,6 +523,64 @@ static void vc4_hdmi_set_infoframes(stru
  	vc4_hdmi_set_hdr_infoframe(encoder);
  }
  
@@ -97,7 +97,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech>
  static void vc4_hdmi_encoder_post_crtc_disable(struct drm_encoder *encoder,
  					       struct drm_atomic_state *state)
  {
-@@ -530,6 +591,8 @@ static void vc4_hdmi_encoder_post_crtc_d
+@@ -532,6 +593,8 @@ static void vc4_hdmi_encoder_post_crtc_d
  
  	HDMI_WRITE(HDMI_VID_CTL,
  		   HDMI_READ(HDMI_VID_CTL) | VC4_HD_VID_CTL_BLANKPIX);
@@ -106,7 +106,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech>
  }
  
  static void vc4_hdmi_encoder_post_crtc_powerdown(struct drm_encoder *encoder,
-@@ -980,6 +1043,7 @@ static void vc4_hdmi_encoder_post_crtc_e
+@@ -982,6 +1045,7 @@ static void vc4_hdmi_encoder_post_crtc_e
  	}
  
  	vc4_hdmi_recenter_fifo(vc4_hdmi);